pvtom
commented
11 months ago Hallo Timmo,
"RSCP authentitication level 0" bedeutet, dass der Login zum Hauskraftwerk nicht erfolgreich war.
Die beiden Topics, die gesendet werden, enthalten einen Startwert, der aber nicht vom Hauskrafktwerk kommt.
Gruß Thomas
timmost
Hi Thomas, vielen Dank für Dein Modul (die Anleitung von e3DC ist ja ziemlich wild...)
Allerdings passt was mit meiner Connection noch nicht. Das Ganze läuft unter Docker compose.
Any hints? Vermute mal irgendwas in Richtung authorization oder reset connection? VG timmo
Ich bekomme im Portainer log folgende Meldungen: Log:
/rscp2mqtt [v3.8] Connecting... E3DC system >192.168.178.58:5033< user: >my.name< MQTT broker >localhost:1883< qos = 0 retain = false MQTT prefix: >e3dcrscp < History year 2017 to 2023 Fetching data every 10 seconds. Requesting PVI data = true (2 strings/trackers) Requesting PM data = true Requesting DCB (battery module) data = true Battery SOC limiter active = false Wallbox support = true Auto refresh mode = false Stdout to terminal
[2023-12-10 13:22:44] pid=1 ppid=0 RscpMqttMain.cpp(1970) Connecting to server 192.168.178.58:5033 [2023-12-10 13:22:44] pid=1 ppid=0 RscpMqttMain.cpp(1977) Success: E3DC connected. [2023-12-10 13:22:44] pid=1 ppid=0 RscpMqttMain.cpp(725) Request authentication (1702210964) [2023-12-10 13:22:46] pid=1 ppid=0 RscpMqttMain.cpp(1143) RSCP authentitication level 0 [2023-12-10 13:22:46] pid=1 ppid=0 RscpMqttMain.cpp(1622) Connecting to broker localhost:1883 [2023-12-10 13:22:46] pid=1 ppid=0 RscpMqttMain.cpp(1633) Error: Connection failed. [2023-12-10 13:22:56] pid=1 ppid=0 RscpMqttMain.cpp(725) Request authentication (1702210976) [2023-12-10 13:22:59] pid=1 ppid=0 RscpMqttMain.cpp(1143) RSCP authentitication level 0 [2023-12-10 13:22:59] pid=1 ppid=0 RscpMqttMain.cpp(1622) Connecting to broker localhost:1883 [2023-12-10 13:22:59] pid=1 ppid=0 RscpMqttMain.cpp(1631) Success: MQTT broker connected. MQTT publish topic >e3dcrscp /battery/state< payload >EMPTY< unit >< [2023-12-10 13:22:59] pid=1 ppid=0 RscpMqttMain.cpp(266) MQTT: starting listener loop MQTT publish topic >e3dcrscp /grid/state< payload >IN< unit >< [2023-12-10 13:23:09] pid=1 ppid=0 RscpMqttMain.cpp(725) Request authentication (1702210989) [2023-12-10 13:23:12] pid=1 ppid=0 RscpMqttMain.cpp(1511) Error: Response receive timeout (retry) [2023-12-10 13:23:22] pid=1 ppid=0 RscpMqttMain.cpp(725) Request authentication (1702211002) [2023-12-10 13:23:22] pid=1 ppid=0 RscpMqttMain.cpp(1143) RSCP authentitication level 0 [2023-12-10 13:23:32] pid=1 ppid=0 RscpMqttMain.cpp(725) Request authentication (1702211012) [2023-12-10 13:23:32] pid=1 ppid=0 RscpMqttMain.cpp(1143) RSCP authentitication level 0 [2023-12-10 13:23:42] pid=1 ppid=0 RscpMqttMain.cpp(725) Request authentication (1702211022) [2023-12-10 13:23:42] pid=1 ppid=0 RscpMqttMain.cpp(1143) RSCP authentitication level 0 [2023-12-10 13:23:52] pid=1 ppid=0 RscpMqttMain.cpp(725) Request authentication (1702211032) [2023-12-10 13:23:52] pid=1 ppid=0 RscpMqttMain.cpp(1143) RSCP authentitication level 0 [2023-12-10 13:24:02] pid=1 ppid=0 RscpMqttMain.cpp(725) Request authentication (1702211042) [2023-12-10 13:24:02] pid=1 ppid=0 RscpMqttMain.cpp(1143) RSCP authentitication level 0 [2023-12-10 13:24:12] pid=1 ppid=0 RscpMqttMain.cpp(725) Request authentication (1702211052) [2023-12-10 13:24:12] pid=1 ppid=0 RscpMqttMain.cpp(1143) RSCP authentitication level 0 [2023-12-10 13:24:22] pid=1 ppid=0 RscpMqttMain.cpp(725) Request authentication (1702211062) [2023-12-10 13:24:22] pid=1 ppid=0 RscpMqttMain.cpp(1143) RSCP authentitication level 0
(etc.)
.config File:
// IP address of the E3/DC S10 device E3DC_IP=192.168.178.58 // Port of the E3/DC S10 device, default is 5033 E3DC_PORT=5033 // E3/DC account E3DC_USER=my.name E3DC_PASSWORD=my.PW // AES password E3DC_AES_PASSWORD=my.AESPW // Target MQTT broker MQTT_HOST=localhost // Default port is 1883 MQTT_PORT=1883 // MQTT user / password authentication necessary? Depends on the MQTT broker configuration. MQTT_AUTH=false // if true, then enter here MQTT_USER= MQTT_PASSWORD= // MQTT parameters MQTT_QOS=0 MQTT_RETAIN=false // Topic prefix (max 24 characters), default is e3dc PREFIX=e3dcrscp // log file LOGFILE=/tmp/rscp2mqtt.log // history start year (installation of the E3/DC device) HISTORY_START_YEAR=2017 // log file for selected topics TOPIC_LOG_FILE=/tmp/rscp2mqtt.history // selected topics for logging (regular expressions) TOPIC_LOG=e3dc/history/.* TOPIC_LOG=e3dc/system/software // Interval requesting the E3/DC S10 device in seconds (1..10) INTERVAL=10 // enable PVI requests, default is true PVI_REQUESTS=true // number of available PV strings(trackers), default is 2 PVI_TRACKER=2 // enable PM requests, default is true PM_REQUESTS=true // use external PM (S10 Mini), default is false PM_EXTERN=false // enable DCB (details for battery modules) requests, default is true DCB_REQUESTS=true // enable battery SOC limiter, default is false SOC_LIMITER=false // Auto refresh, default is false AUTO_REFRESH=false // Disable MQTT publish support (dryrun mode) DISABLE_MQTT_PUBLISH=false // Wallbox, default is false WALLBOX=true // topics to be published in each cycle (regular expressions) FORCE_PUB=e3dc/[a-z]+/power FORCE_PUB=e3dc/battery/soc
Docker Compose
rscp2mqtt: container_name: "rscp2mqtt" image: pvtom/rscp2mqtt:latest-with-influxdb restart: unless-stopped environment: