Closed QUINRY closed 10 months ago
@pvvx
Without registration in the Zigbee network, the thermometer does not work. Registration of the thermometer in the Zigbee network is carried out by closing the “reset” contacts with “gnd” for 3 seconds or when turning on the power after flashing. To save power, the registration time is limited by turning off the thermometer after 45 seconds.
Without registration in the Zigbee network, the thermometer does not work. Registration of the thermometer in the Zigbee network is carried out by closing the “reset” contacts with “gnd” for 3 seconds or when turning on the power after flashing. To save power, the registration time is limited by turning off the thermometer after 45 seconds.
Can't I flash any other firmware anymore?
Use Zigbee OTA.
Zigbee OTA
Where can I find it and how can I do it?
You have flashed a program for the thermometer to work on the Zigbee network. The ZigBee standard has "ZigBee OTA" in its specification.
https://github.com/devbis/z03mmc/issues/32 https://github.com/devbis/z03mmc/issues/55
Your best bet is using this: https://www.zigbee2mqtt.io/guide/usage/ota_updates.html#local-ota-index-and-firmware-files
Hi,
İ'm flashed z03mmc.bin for zigbee support for my LYWSD03MMC.
After flash, device shows temp. and humidity but not BLE is not working.
After a few seconds, the screen stays like this and no ble appears again.
How can i fix this?