search

pvvx / ZigbeeTLc

Custom firmware for Zigbee 3.0 IoT devices on the TLSR825x chip
Other
327 stars 15 forks source link

Lywsd03mmc stuck after flash firmware #20

Closed pingoo78 closed 7 months ago

pingoo78 commented 7 months ago

Hi and thanks for this good stuff.

I have flashed your fimware on a lywsd03mmc B1.4. After the flash, the lywsd03mmc restart and now I have the temp and humidity and bluetooth doesn't work. So for me the firmware is well installed.

But the bluetooth icon stay present all the time and I don't success to connect to my zigbee bridge... I try reset and grnd pin. After 2 second, the lywsd03mmc switch from C to F (it's OK) and after 7 seconds he restart (3 dots appears fastly). I try to remove the battery for few hours without success.

I never success to add on my zigbee bridge... I use Z2M.

So, I can't roll back to BLE.

Any idea ?

pingoo78 commented 7 months ago

Sorry, After restart near the zigbee bridge, it's connected now.

pvvx commented 7 months ago

Due to high consumption, limited transmit power of +2 dB is used. A moderately discharged CR2032 battery cannot withstand higher power.