search

pvvx / ZigbeeTLc

Custom firmware for Zigbee 3.0 IoT devices on the TLSR825x chip
Other
404 stars 23 forks source link

TS0201 by _TZ3000_0s1izerx - No OTA image is available in ZHA #94

Open hippich opened 6 months ago

hippich commented 6 months ago

I have TS0201 temperature/humidity sensor, but it is round one, not rectangular. It reports:

TS0201 by _TZ3000_0s1izerx IEEE: a4:c1:38:b4:55:3f:82:f9 manufacturer_code: 4417 image_type: 54179 current_file_version: 70

While TS0201 firmware in this repo has "imageType": 529,, which is, i guess, the reason ZHA refuses to upload firmware.

Question - are these actually different sensors and forcing ZHA to upload it will brick it, or it is just all the same with just different image_type?

For the reference - this is the type of sensor I have :

image

pvvx commented 6 months ago

manufacturer_code: 4417 -> 0x1141 image_type: 54179 -> 0xDAD3 current_file_version: 70 -> 0x0046

OTA file: 1141-d3a3-01983001-TS0201z_v0121.zigbee

https://github.com/pvvx/ZigbeeTLc/tree/master/bin

hippich commented 6 months ago

Thanks! ZHA picked it up!

ps: just small correction for someone else looking for it later

instead of 

image_type: 54179 -> 0xDAD3

meant to be:

image_type: 54179 -> 0xD3A3
hippich commented 6 months ago

And I think it semi-bricked itself after the update, so just FYI if anyone will be looking into doing it. Will keep tinkering with it.

symptoms:

when pressing button, red led lights up, but very dim. when holding for 7 seconds to re-pair, red led lights up solid, but again dim, and after a few seconds turns off. ZHA can't find it so far.

It does (dimly) blinks every few seconds. So I guess it does something.

hippich commented 6 months ago

Opened it up. Looks like there is no ISP header. I wonder if I can connect directly to ZTU board instead to flash it with USB-TTL programmer?

image

pvvx commented 6 months ago

when pressing button, red led lights up, but very dim. when holding for 7 seconds to re-pair, red led lights up solid, but again dim, and after a few seconds turns off. ZHA can't find it so far.

This is a normal reaction: reset the settings and pairing.

It does (dimly) blinks every few seconds. So I guess it does something.

Indication that there is no pairing.

After pairing, it flashes quickly several times.

pvvx commented 6 months ago

Opened it up. Looks like there is no ISP header. I wonder if I can connect directly to ZTU board instead to flash it with USB-TTL programmer?

https://pvvx.github.io/TH03Z/