Can't hear other person

[GoogleCodeExporter]

What steps will reproduce the problem?
1. dial other person
2. listen

What is the expected output? What do you see instead?
The other person can hear me and the audio quality seems to be very good
(woohoo!). I can't hear the other person talking at all

What version of the product are you using? On what operating system?
Sipdroid 0.9 + the official ADP 1.5 Image with current radio fw

Please provide any additional information below.
Tried using sipgate.de directly and pbxes.com (with sipgate)

Original issue reported on code.google.com by marc.see...@gmail.com on 28 Apr 2009 at 8:53

[GoogleCodeExporter]

I'm another with the google voice/gizmo5 problem. Sipdroid registers fine, green
button on n1 shows I'm registered, but am unable to add gizmo number to google 
voice.
When I activate link on the 'add phone' page, GV calls, but N1 never rings to 
allow
me to input two number activation code. frustrating!!

Original comment by rayn...@gmail.com on 24 Feb 2010 at 3:13

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

The last few versions of  Sipdroid mute my Galaxy (Android 1.5). Microphone 
works,
but I can't hear the person on the other end of the line. Then no sound works 
on the
phone. Only reboot solves the problem.

Funny thing: just tested version 1.2.4 and it works perfect. The newest version
(1.4.5) has the same issue described above.

Original comment by atanas.pavlov@gmail.com on 9 Apr 2010 at 1:33

[GoogleCodeExporter]

The problem with Samsung Galaxy is being discussed in issue 173.

Original comment by pmerl...@googlemail.com on 9 Apr 2010 at 7:30

[GoogleCodeExporter]

Issue 355 has been merged into this issue.

Original comment by pmerl...@googlemail.com on 30 Apr 2010 at 6:27

[GoogleCodeExporter]

Issue 499 has been merged into this issue.

Original comment by pmerl...@googlemail.com on 15 Jun 2010 at 8:03

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Same thing happened today.

To verify I also tried my connection (Wifi+Gizmo5) over Fring, still no 
incoming sound. This is is probably a gizmo issue.

Original comment by sukrutik...@gmail.com on 23 Jun 2010 at 3:17

[GoogleCodeExporter]

I am using Samsung Galaxy S, and problem with calling out the other party no 
audio after connected. I have solved it by changing the Audio Codecs to ONLY 
set PCMA (64kbit), PCMU(64kbit)to Always try and GSM(13kbit)to Only over WLAN. 
For infor I am using my home Wifi. these setting works well for both outgoing 
and incoming calls. Hope these helps...

Original comment by aikido2...@gmail.com on 6 Jul 2010 at 6:46

[GoogleCodeExporter]

I'm using Samsung Galaxy S too in Korea. 
I have the same problem that the other end can't hear my voice. This only 
happens when I get a call, doesn't happen if I call first(either end hears fine)

I tried what aikido2man said, but it didn't work for me. 
I set 'never' to other codecs and PCMA, PCMU to 'Always try' and GSM to 'Only 
over WLAN'

Original comment by nohkwangmin on 6 Jul 2010 at 11:38

[GoogleCodeExporter]

I probably have the same issue as # 60 above. On Samsung Galaxy S, calling 
using Google Voice -> IpKall -> Gizmo5 -> pbxes -> Sipdroid. Worked fine on HTC 
Hero, however on Galaxy S the other party is unable to hear me (sound cutting 
out so much that it makes my voice completely indecipherable). Tried several 
versions of Sipdroid, including ones confirmed working with exact same settings 
on Hero.

However, calling to Skype using Sipdroid with username@skype does in fact work.

Original comment by per.andr...@gmail.com on 7 Jul 2010 at 10:10

[GoogleCodeExporter]

I'm having the same issue with my Google Voice and Gizmo5 settings. I have set 
my Gizmo5 inbound calls to be forwarded to my GV# so I can answer my calls via 
Sipdroid...I can hear the other party in a very LOW audio. The other party 
can't hear me. 

Original comment by mamib...@gmail.com on 13 Jul 2010 at 8:17

[GoogleCodeExporter]

Issue 554 has been merged into this issue.

Original comment by pmerl...@googlemail.com on 14 Jul 2010 at 11:02

[GoogleCodeExporter]

Wow, seems like this is prettty common and has been there since day dot.
FWIW I get no voice in each diection on an outbound Sip call over wifi.
Using teh Xlite V2 softphone allows the call with perfect sound.

Sip provider: sipme.com.au
Hardware: Galaxy S
Android: 2.1

Using pbxes allows the voice to trickle through but its too badly distorted to 
be understood.

Could one of the developers comment on what other is needed to identify the 
issue and provide a generic solution?

Original comment by william....@gmail.com on 18 Jul 2010 at 5:18

[GoogleCodeExporter]

I am having same issue as #554:
Outgoing calls ok
Incoming calls: I can't hear other person - other person can't hear me.

Already tried the following:
1) Setup PC SIP-Client with Sipprovider behind router => ok
2) Setup PC SIP-Client with pbxes.org behind router => ok
3) Setup sipdroid with Sipprovider behind router => incoming no audio on both 
sides
4) Setup sipdroid with pbxes.org behind router => incoming no audio on both 
sides

I am using:
Samsung i5700 with eclair 2.1 Build XXJF2
Sipdroid 1.5.5 beta

Original comment by ticket...@gmail.com on 27 Jul 2010 at 8:34

[GoogleCodeExporter]

Hi I am having the same issue as all the above.  I can place calls on either 
wifi or 3g w/o any problem.  Inbound calls on either 3g or wifi ring but after 
answer there is no audio either  way. Neither party can hear. 

I am using
Motorola Droid X
Sipdroid 1.5.5
pbx service is nt.iscom.net(broadworks)

Verified same settings work on laptop softphone(both counterpath bria as well 
as nch express talk)

Please advise if there is more information that I can provide you

Original comment by dkmart...@gmail.com on 30 Jul 2010 at 7:13

[GoogleCodeExporter]

This issue is hardly connected to codecs. Ask your voip provider what codecs 
they accept and try to force Sipdroid use the same codec. I had the same 
problem but when I changed the provider the problem was solved by him self.

I'm in Brasil and using:
Motorola Milestone, Android 2.1, Sipdroid 1.5.5, provider BlasterPhone, Wifi 
and 3G Vivo.

Original comment by fmgu...@gmail.com on 30 Jul 2010 at 7:32

[GoogleCodeExporter]

In reviewing this thread there seems to be many cases of the exact issue that I 
am seeing which is that  outbound calling is fine, but inbound calling does not 
have audio either way. I tried to setup pbxs.org account but my provider 
requires username, password, authentication name. This does not appear to be 
supported by pbxs.org.  If this was only a personal account i would not worry 
about this, but I am trying to get a decent solution for my corporate hosted 
voip pbx.  Is there any hope of a resolution? An option for paid support to 
resolve the problem? Or maybe something else that I am missing?

Original comment by dkmart...@gmail.com on 4 Aug 2010 at 5:59

[GoogleCodeExporter]

hi, all, I have the same issues before, when call on different network, 
establish a call and hear the other person, but the other person can't hear me.
I resolve it like that: remove the video sdp,and then it works fine:)

Original comment by starhubp...@gmail.com on 25 Aug 2010 at 9:42

[GoogleCodeExporter]

OK, on Motorola i1 running Android 1.5, sipdroid 1.5.5, I get no audio(like 
phone is muted) originating from phone on any call, I can hear other party fine.
Fix (???) is hit menu as soon as call connects, hit speaker softbutton that 
pops up, and it is fixed. An additional speaker icon appears on top of 
screen(separate from speakerphone icon)  and audio works both ways now. Have to 
do this on every call.
That strange additional speaker icon does not appear on any other app and in 
not in phone manual??? weird.

Original comment by Oscar...@gmail.com on 3 Sep 2010 at 4:56

[GoogleCodeExporter]

I read through the thread. I am only able to get 2 way audio when on 
speakerphone on my motorola i1. I would guess that it has something to do 
specifically with this phone. A motorola droid connected to the same pbx does 
not have this problem. How can I help. People with one way audio make sure you 
router has alg turned off.

Original comment by prahjist...@gmail.com on 10 Sep 2010 at 1:50

[GoogleCodeExporter]

I have a HTC Wildfire.
I installed sipdroid 1.5.7 beta. It works fine, but there is a Porblem with the 
audio. after a few seconds during the call when the Display go off i cant here 
anythink. When i turn it on the sound is back and i can here the other side. Is 
there any workaround or fix it in the next version?

Original comment by XaLo...@gmail.com on 20 Sep 2010 at 8:46

[GoogleCodeExporter]

Same issue in the Droid Incredible using Gizmo5 and GV

Original comment by laddmc on 21 Sep 2010 at 5:44

[GoogleCodeExporter]

Issue 663 has been merged into this issue.

Original comment by pmerl...@googlemail.com on 29 Sep 2010 at 8:16

[GoogleCodeExporter]

same problem/issue on htc magic 32b on tmobile 3g network as I can call person 
and they can hear me but i can't hear them, I tried all of the audio codecs and 
still the problem persist and I am on the lastest version of sipdroid.  It also 
on shows data being uploaded when you look at the task screen bar with 3g as 
only the triangle going up is lit up (white) and the triangle going down is 
blank (gray).  I thought it was the network but I am starting to think it might 
be a problem with sipdroid as I am not the only person with this problem. 

Original comment by ncassano...@gmail.com on 4 Oct 2010 at 9:26

[GoogleCodeExporter]

same problem here with an htc desire. problem is, that I am able to hear the 
other person if the phone is not on my ear thus the display is enabled. At the 
moment I put the phone on my ear, the display AND the sound turns off.

Original comment by mic.schu...@googlemail.com on 22 Oct 2010 at 6:51

[GoogleCodeExporter]

Sipdroid was working perfectly before updating to 1.6.1. I can make and receive 
calls and the other party can hear me perfectly but I cant hear 
anything....running on Droid X

Original comment by HeidyBlu...@gmail.com on 22 Oct 2010 at 10:01

[GoogleCodeExporter]

Like Previous comment with 1.6.1, each caller can't hear the other person (two 
Google Nexux One under Froyo 2.2)
But if I downgrade to 1.5.5 it works well.
Don't hesitate to contact me if you need more details (for example wireshark 
traces).

Original comment by florent....@gmail.com on 5 Nov 2010 at 3:55

[GoogleCodeExporter]

It does the same thing on my desire running froyo, but the problem is caused by 
the screen turning off when I place it near my ear.  The other person can still 
hear me clearly, but I hear nothing.  I can put the call on speaker phone and 
it works fine.

Original comment by michaelj...@gmail.com on 5 Nov 2010 at 6:33

[GoogleCodeExporter]

I use to have this problem of the person on the other end not hear me, when i 
placed a call through sipdroid, but now the problem has vanished as I use pbxes 
as my sip account, now when i call my calls are clear, the other person on the 
other end hears me clearly with no lag or echo.  I ran several test calls to 
cellphones, house phones and sip addresses and they all worked with no lag or 
echo, I even had cellphones, house phone and sip phones call my number and it 
worked perfectly.  I think the reason why I had problems with sipdroid b/4 was 
because in sipdroid I used to connect to my sip account at iptel and with that 
I used to could never get a good call through as the person on the other end 
would always not hear me but once i used pbxes to connect to my iptel account 
and have sipdroid just connect to my pbxes now my calls work most of the time 
about 90% of the time of course there are still problems with sipdroid but I 
think that is the network as I use sipdroid on tmobile HSPA data network (3G) 
and it might be due to the ammount of traffic on there network at that time 
that i am receiving calls and placing them through sipdroid.

Original comment by ncassano...@gmail.com on 6 Nov 2010 at 2:02

[GoogleCodeExporter]

I am using a LG Loop.  I am having the similar problem when I try to place 
calls, the other party can hear me well, but I cannot hear anything at all.   

I tried everything I can but nothing seems to be working. Any help?    

Original comment by kevinbur...@gmail.com on 12 Nov 2010 at 3:58

[GoogleCodeExporter]

I tried many ways: 3G in differents providers, wifi in differents networks, 
android in differents versions and differents smartphones, differents CODECs, 
even differents sip clients. Some times they work fine, some times not. And 
funny: it starts and stops working randomly.
I guess the problem is in the way the operating system works with the 
requirements of VoIP / SIP applications at cell/smartphones.
I'm not sure but I heared that Sip application works fine in another plataforms.

Original comment by fmgu...@gmail.com on 12 Nov 2010 at 7:45

[GoogleCodeExporter]

For Kevinburgess4321, how did you connect sipdroid? are you connecting through 
pbxes.org? or another sip site?

Original comment by ncassano...@gmail.com on 13 Nov 2010 at 1:17

[GoogleCodeExporter]

Same problem with HTC hero. Is really random. It randomly effects certain phone 
numbers and not others and sometimes does effect them and sometimes doesn't.

Is anyone looking into this problem?

Original comment by shimon.i...@gmail.com on 16 Nov 2010 at 12:33

[GoogleCodeExporter]

Issue 762 has been merged into this issue.

Original comment by pmerl...@googlemail.com on 27 Nov 2010 at 12:26

[GoogleCodeExporter]

Issue 768 has been merged into this issue.

Original comment by pmerl...@googlemail.com on 30 Nov 2010 at 7:51

[GoogleCodeExporter]

Just got informed of the merge of my issue (768) in here8   I suspect very 
different issues though.  Clearly some of us have NAT problems which lead to 
asymetrical behavior.

Others, a.o. Me,  have CODEC compatibility or negociation problems  (no voice 
either way)
To be specific, my phone works fine with some VoIP providers, and not with a 
specific one. The network configuration is the same in all cases.
Also, I can't incriminate that specific provider since it works fine with other 
handsets on the same network here.  Both SIPdroid and the provider seem OK on 
their own, but they don't work together - sort of compatibility problem.
The provider supports G711a/u which are, as far as I know,  other words for 
PCMA/U .

Thx.

Original comment by souff1...@gmail.com on 30 Nov 2010 at 8:20

[GoogleCodeExporter]

Me again ...

Forcing GSM codec selection from the Sipdroid parameters produces the exact 
same problem.  (OK on BETAMAX (Nonoh, Voipwise, ... SIP services,  but no voice 
either way on VoipTraffic  provider.
Looks like the problem comes from the provider, but the same provider works 
fine with other client hardware !!

Original comment by souff1...@gmail.com on 3 Dec 2010 at 3:23

[GoogleCodeExporter]

No audio on incoming calls with EVO 4G over wifi or 4G with or without stun. 
Tried with sipgate and pbx (GV integration). Works "maybe" once or twice but 
ceases working randomly.

Original comment by justin.s...@gmail.com on 10 Dec 2010 at 6:57

[GoogleCodeExporter]

No audio when calling out via voipbuster. It says it connects but no audio. EVO 
4G over wimax and wifi.

Original comment by justin.s...@gmail.com on 10 Dec 2010 at 6:57

[GoogleCodeExporter]

I used to have the same issue with sipdroid and other sip apps: turned out to 
be a problem with my network. I managed to get the audio by using openvpn. 
Unfortunately openvpn is not well recognized by sipdroid (see defect 368). So 
I'm sticking to other apps until defect 368 is solved.

Original comment by mhamed.l...@gmail.com on 16 Dec 2010 at 8:08

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

I am having the same issue as comments 79 and 76 above.

Running sipdroid to pbxes on a Nexus S and Android 2.3

The Nexus detects when there is an obstruction in front of it
(face, hand etc) and turns off the screen, presumably to save
battery during a long call. 

At the very moment the screen goes off, the audio coming in is
muted. In my case, the microphone is still working and the other
side can still hear me. But the other side cannot hear me.

This is very easy to reproduce.

There is a setting in sipdroid that allows to keep the screen on,
if this is set, the screen will stay on (but will go to lower brightness)
and the audio will not be muted. 

So this is a reasonable workaround until the real problem is fixed which
should be pretty easy to do. It is clear that this is a bug and not 
intended behavior.

Original comment by david.an...@gmail.com on 4 Jan 2011 at 7:42

[GoogleCodeExporter]

Have the same problem as comment 60, though I'm using sipdroid from android 
emulator. The sipdroid version is 1.5.7. Does anyone have newer sipdroid 2.0 
source code or how can i get it? regards  

Original comment by hmusl...@gmail.com on 12 Jan 2011 at 3:36

[GoogleCodeExporter]

I have a htc hd2 running on andriod 2.3 sipdroid seems to be cool but people 
cant hear me when i call? what do i do?

Original comment by JonJon1...@gmail.com on 15 Jan 2011 at 6:14

[GoogleCodeExporter]

Thanks for david, his workaround with the screen not turning off works for me!

A note to the developers: I have a nexus one and a t-mobile G2, both run the 
latest version 2.0.1 beta but the error with not hearing the other person only 
happens with the G2, the nexus runs fine.

Original comment by Guido.Sc...@gmail.com on 17 Jan 2011 at 10:38

[GoogleCodeExporter]

recently i check latest sipdroid version 2.0.1 with HTC wildfire android os 
version 2.2.1,google nexus one os version 2.2.2, and HTC desire os version 
2.2.2 devices by using wifi network connection, i get one sided voice that was 
can not hear the other person problem by wifi connection on my devices.

but when i use EDGE/3g/gprs connectoin then i get the two sided voice.

another query that was when i build latest sipdroid 2.0.1 on android version 
2.3.1 then error occure after established a call and OSNetworkSystem.c file is 
the cause of the error. the error was 
"java/lang/ClassNotFoundException::org.apache.harmony.luni.net.GenericIPMreq 
can not load delvic machine"

how can i solve this problem.

i am using adt 9.0.0.v201 and android 2.3.2, eclipse 3.5.2 and latest sipdroid 
2.0.1
open souce.

Original comment by ocean.ra...@gmail.com on 3 Feb 2011 at 12:32

[GoogleCodeExporter]

recently i check latest sipdroid version 2.0.1 with HTC wildfire android os 
version 2.2.1,google nexus one os version 2.2.2, and HTC desire os version 
2.2.2 devices by using wifi network connection, i get one sided voice that was 
can not hear the other person problem by wifi connection on my devices.but get 
both side voice voice only em ulator.

but when i use EDGE/3g/gprs connectoin then i get the two sided voice.

another query that was when i build latest sipdroid 2.0.1 on android version 
2.3.1 then error occure after established a call and OSNetworkSystem.c file is 
the cause of the error. the error was 
"java/lang/ClassNotFoundException::org.apache.harmony.luni.net.GenericIPMreq 
can not load delvic machine"

how can i solve this problem.

i am using adt 9.0.0.v201 and android 2.3.2, eclipse 3.5.2 and latest sipdroid 
2.0.1
open souce.

Original comment by ocean.ra...@gmail.com on 5 Feb 2011 at 2:09

[GoogleCodeExporter]

recently i check latest sipdroid version 2.0.1 with HTC wildfire android os 
version 2.2.1,google nexus one os version 2.2.2, and HTC desire os version 
2.2.2 devices by using wifi network connection, i get one sided voice that was 
can not hear the other person problem by wifi connection on my devices.but get 
both side voice voice only em ulator.

but when i use EDGE/3g/gprs connectoin then i get the two sided voice.

another query that was when i build latest sipdroid 2.0.1 on android version 
2.3.1 then error occure after established a call and OSNetworkSystem.c file is 
the cause of the error. the error was 
"java/lang/ClassNotFoundException::org.apache.harmony.luni.net.GenericIPMreq 
can not load delvic machine"

how can i solve this problem.

i am using adt 9.0.0.v201 and android 2.3.1, eclipse 3.5.2 and latest sipdroid 
2.0.1
open souce.

Original comment by ocean.ra...@gmail.com on 8 Feb 2011 at 9:08

[GoogleCodeExporter]

i get both side voice by using wifi/wlan connection on android vs 2.1. but get 
one sided voice by using wifi/wlan on latest version 2.1updated, 2.2, and 
2.2.1, and 2.2.2 and face "can not hear the other person problem". 

Original comment by ocean.ra...@gmail.com on 9 Feb 2011 at 8:25