duplicate beam tag finder doesn't work

[Nikos369]

🙏 PLease use the search in the issue section before filing a new issue

---

🐞 Describe the bug

Replace these lines with your description. Be as specific as possible and list steps to reproduce the issue. If you have any suggestions for the solution please list that as well.

If you have installed pyRevit, and the installation completed with no errors but pyRevit doesn't load, please run the command below in terminal / command line. This should fix the issue on your machine, however, please continue filing the issue with instructions below.

👉 pyrevit attach master 2711 --installed

If it does not work, try to disable your revit addins, all of them. Then, one at a time, reactivate them and restart Revit to figure out which one is interacting badly with pyRevit and Report.

♻️ To Reproduce

Steps to reproduce the behavior:

1. Go to '...'
2. Click on '....'
3. Scroll down to '....'
4. See error

⏲️ Expected behavior

A clear and concise description of what you expected to happen.

🖼 Screenshots of the issue

If applicable, add screenshots to help explain your problem.

🖥️ Hardware and Software Setup (please complete the following information):

• OS: [e.g. iOS]
• pyRevit Version [e.g. 22]
• pyRevit Environment: Open a command prompt 🖥 and run the command below. Replace these lines with the results. Take a look at this markdown guide and wrap the command results in ``` when pasting here for correct formatting.

👉 pyrevit env

Additional context

Add any other context about the problem here.

[jmcouffin]

Please give some context @Nikos369

[Nikos369]

Hi,

excuse me, you're right, this to i run the duplicate beam tag finder and hi had this error. iduplicate beam tag finder and hi had this error. i had duplicated type marks and i was trying to use the tool .

please let me know if you can help or you have any questions

thanks

Nicholas Tsagkos

[Nikos369]

It's an extension of pyrevit called pystructure that has this duplicate tag finder tool.

[jmcouffin]

ok, so this is not a pyrevit issue per se you need to fill your issue on the owner of the extension repository:

https://github.com/sampy23/pyStruct.extension/issues/new

[Nikos369]

Not per se, will do, thanks for providing the link.