Open pganssle opened 7 years ago
After PEP-495, the default value for non-fold-aware datetimes is that they return the DST side, not the STD side (as was the assumption before PEP-495). This invalidates an assumption made in tz.fromutc()
. See lines 991-1000 of datetime.py:
dtdst = dt.dst()
if dtdst is None:
raise ValueError("fromutc() requires a non-None dst() result")
delta = dtoff - dtdst
if delta:
dt += delta
dtdst = dt.dst()
if dtdst is None:
raise ValueError("fromutc(): dt.dst gave inconsistent "
"results; cannot convert")
Line 997 (https://github.com/python/cpython/blob/be8de928e5d2f1cd4d4c9c3e6545b170f2b02f1b/Lib/datetime.py#L997) assumes that an ambiguous datetime will return the STD side, not the DST side, and as a result, if you feed it a date in UTC that should resolve to the STD side, it will actually return 1 hour (or whatever the DST offset is) AFTER the ambiguous date that should be returned.
If 997 is changed to:
dtdst = dt.replace(fold=1).dst()
That will not affect fold-naive zones (which are instructed to ignore the fold
parameter) and restore the original behavior. This will allow fold-aware timezones to be implemented as a wrapper around fromutc()
rather than a complete re-implementation, e.g.:
class FoldAwareTzInfo(datetime.tzinfo):
def fromutc(self, dt):
dt_wall = super(FoldAwareTzInfo, self).fromutc(dt)
is_fold = self._get_fold_status(dt, dt_wall)
return dt_wall.replace(fold=is_fold)
I don't think timezones that satisfy the invariant expected by the default fromutc() is common enough that we need to provide special support for them. Note that in most cases it is the UTC to local conversion that is straightforward while Local to UTC is tricky, so the code that reduces a simple task to a harder one has questionable utility.
Of the tzinfo
implementations provided by python-dateutil
, tzrange
, tzstr
(GNU TZ strings), tzwin
(Windows style time zones) and tzlocal
all satisfy this condition. These are basically all implementations of default system time zone information.
With current implementations tzfile
and tzical
also use the invariant algorithm, though theoretically there are edge cases where this will cause problems, and those should have their fromutc()
adjusted.
In any case, I can't think of a single actual downside to this change - all it does is preserve the original behavior of fromutc()
. As currently implemented, the algorithm is simply wrong when dst()
is affected by fold
, and this change would have no effect on zones where dst()
is not affected by fold.
Paul G at Github:
""" To be clear, I'm just saying that fromutc() goes from returning something meaningful (the correct date and time, with no indication of what side of the fold it's on) to something useless (an incorrect date and time) in the case where you're on the STD side of the divide. That change would restore the original behavior.
For most of the tzinfo implementations I'm providing (tzrange, tzwin, etc), there's no problem with an invariant standard time offset, so I'd prefer to fall back on the default algorithm in those cases.
Another advantage with using the standard algorithm as a starting point is that it all the type checking and such that's done in fromutc is done at that level, and I don't have to keep track of handling that.
All that said, it's not a huge deal either way. """
Since it is not a big issue for you, I would rather not reopen this can of worms. It may be better to return a clearly erroneous result on fold-aware tzinfos to push the developers like you in the right direction. :-)
After all, how much effort would it save for you in dateutil if you could reuse the base class fromutc?
After all, how much effort would it save for you in dateutil if you could reuse the base class fromutc?
Realistically, this saves me nothing since I have to re-implement it anyway in in all versions <= Python 3.6 (basically just the exact same algorithm with line 997 replaced with enfold(dt, fold=1) rather than dt.replace(fold=1), but I'd rather it fall back to the standard fromutc()
in fold-aware versions of Python 3.6.
That said, I don't see how it's a big can of worms to open. If you're going to provide fromutc()
functionality, it should not be deliberately broken. As I mentioned above, I see no actual downside in having fromutc()
actually work as advertised and as intended.
I can't think of a single actual downside to this change - all it does is preserve the original behavior of
fromutc()
.
You've got me on the fence here. If what you are saying is correct, it would make sense to make this change and better do it before 3.6 is out, but it would take me some effort to convince myself that an implementation that reuses patched fromutc() is indeed correct.
Why don't you implement tzrange.fromutc() in terms of say tzrange.simple_fromutc() which is your own patched version of tzinfo.fromutc(). If this passes your tests and is simpler than a straightforward fromutc() that does not have to look at tzinfo through the needle hole of utcoffset()/dst() pair but knows the internals of your timezone object, we can consider promoting your simple_fromutc() to default stdlib implementation.
Alternatively, you can just convince Tim. :-)
So I created a little patch for this, and when I was working on it I realized that it's actually possible to implement full fold
support in a generic way in fromutc
under the assumption that utcoffset - dst
holds at all points (which is the fundamental assumption of the builtin fromutc
function).
It adds a bit of overhead, but I think any current fold-aware operations need to be implemented in pure Python anyway (and involve even more overhead), so I think it would be a net gain.
The big downside I see here is that it cannot take advantage of any sort of "is_ambiguous" function and has to rely on the method of "change the fold and see if the answer is different" to determine ambiguity. I think this is a small cost to pay for a generic implementation, though. I'm pretty busy this week and next week will be hectic too, but towards the end of the month I can probably come up with a test suite for this and look at some actual performance numbers.
it's actually possible to implement full
fold
support in a generic way
I am aware of that. In fact, some of the draft versions of PEP-495 implementation did contain such code. The problem is that any such tz.fromutc() implementation would necessarily change the behavior of the old programs. Moreover, any implementation of tz.fromutc() in terms of tz.utcoffset() is more complicated and less efficient than code that he's direct access to a database of transition times.
I am aware of that. In fact, some of the draft versions of PEP-495 implementation did contain such code. The problem is that any such tz.fromutc() implementation would necessarily change the behavior of the old programs.
This I'm not sure about - the implementation I've provided gives the same answer for any program that pays no attention to fold
, because I'm relying on utcoffset
and dst
's reaction to a change in fold. Any code that's not explicitly handling fold will give the same answer as it always has.
Moreover, any implementation of tz.fromutc() in terms of tz.utcoffset() is more complicated and less efficient than code that he's direct access to a database of transition times.
While true, that does not argue in favor of having a version of fromutc
that doesn't respect fold
, because anyone looking for a more efficient implementation will have to reimplement fromutc
anyway if necessary.
Another argument in favor of having fromutc
respect fold by default is that it makes it very simple to support fold, particularly for people who aren't optimizing for speed. As it is now, you have to duplicate a lot of fold-handling and transition lookup logic in both fromutc
and utcoffset
/ dst
, because they are getting the same information but they are not implemented in terms of one another (and it's not even amazingly easy to write a function that factors out the common code). That's more code to write and maintain and test.
At the end of the day, almost everyone who cares about efficiency will use dateutil or pytz for their application, and dateutil and pytz can and do re-implement fromutc when appropriate - though there are still some dateutil
tzinfo subclasses where this would be more efficient than what's there now. I don't see why the perfect has to be the enemy of the good here, though; having fold support in fromutc
is a net benefit for anyone using fromutc
and for adoption of PEP-495 in a wider context.
Paul,
In your opening post to this issue you suggested to change one line 1 in Lib/datetime.py from
dtdst = dt.dst()
to
dtdst = dt.replace(fold=1).dst()
This looks like a rather innocuous change, but it does not by itself make fromutc() return properly "enfolded" instances. IIRC, the best algorithm that Tim and I were able to come up with to derive the fold value required something like six utcoffset() probes.
PR 7425 that you submitted looks somewhat involved. Can you submit an equivalent datetime.py patch?
Note: these values reflect the state of the issue at the time it was migrated and might not reflect the current state.
Show more details
GitHub fields: ```python assignee = 'https://github.com/abalkin' closed_at = None created_at =
labels = ['type-feature', '3.8']
title = '`tzinfo.fromutc()` fails when used for a fold-aware tzinfo implementation'
updated_at =
user = 'https://github.com/pganssle'
```
bugs.python.org fields:
```python
activity =
actor = 'belopolsky'
assignee = 'belopolsky'
closed = False
closed_date = None
closer = None
components = []
creation =
creator = 'p-ganssle'
dependencies = []
files = []
hgrepos = []
issue_num = 28602
keywords = ['patch']
message_count = 10.0
messages = ['280007', '280009', '280011', '280012', '280014', '280015', '318743', '318772', '318773', '318780']
nosy_count = 3.0
nosy_names = ['tim.peters', 'belopolsky', 'p-ganssle']
pr_nums = ['7425']
priority = 'normal'
resolution = None
stage = 'patch review'
status = 'open'
superseder = None
type = 'enhancement'
url = 'https://bugs.python.org/issue28602'
versions = ['Python 3.8']
```