noob502
commented
4 months ago I am using Jetson Orin Nano Devkit 4GB version.
Closed noob502 closed 4 months ago
noob502
commented
4 months ago I am using Jetson Orin Nano Devkit 4GB version.
pythops
commented
4 months ago noob502
commented
4 months ago I observed this log in UART terminal. I did not do any modification. Yes, I can build the image without any error.
Initially I used (a I have jetson orin nano devkit) sudo just build-jetson-image -b jetson-orin-nano-devkit -d SD but then I got these error The supported boards are:
then I used only 'sudo just build-jetson-image -b jetson-orin-nano -d SD' and it created the image without any error.
noob502
commented
4 months ago I have added display , keyboard, mouse with the board but display was all black ()though as I understand the image does not have any UI ) and typed the password but did not work either.
pythops
commented
4 months ago Strange !
you're using jetson as username and jetson as password right ?
I have tried both your per-build image and step-wise build image, it stucked at password login. I used 'jetson' but not working. Here is partial build log details
[ 6.974451] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized) [ 6.985822] pva 16000000.pva0: Adding to iommu group 48.
[ 6.991598] nvdla 15880000.nvdla0: Adding to iommu group 49
[ 6.997665] nvdla 158c0000.nvdla1: Adding to iommu group 50
[ 7.003828] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2
[ 7.010997] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 7.018530] tegra-fuse-burn efuse-burn: shutdown limit check disabled
[ 7.025149] tegra-fuse-burn efuse-burn: Fuse burn driver initialized
[ 7.031883] serial-tegra 3100000.serial: Adding to iommu group 2
[ 7.038481] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 17, base_baud =T [ 7.048285] serial-tegra 3130000.serial: Adding to iommu group 2
[ 7.054793] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 63, base_baud =T [ 7.064560] serial-tegra 3140000.serial: Adding to iommu group 2
[ 7.071124] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 64, base_baud =T [ 7.097718] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10e [ 7.107463] tegra-xusb 3610000.xhci: xHCI Host Controller
[ 7.113036] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus nu1 [ 7.121716] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x1200 [ 7.131334] tegra-xusb 3610000.xhci: irq 230, io mem 0x03610000
[ 7.137789] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b0 [ 7.146284] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1 [ 7.153696] usb usb1: Product: xHCI Host Controller
[ 7.158702] usb usb1: Manufacturer: Linux 5.10.120-tegra xhci-hcd
[ 7.164962] usb usb1: SerialNumber: 3610000.xhci
[ 7.170493] hub 1-0:1.0: USB hub found
[ 7.174375] hub 1-0:1.0: 4 ports detected
[ 7.178747] tegra-xusb 3610000.xhci: xHCI Host Controller
[ 7.184300] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus nu2 [ 7.192081] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSped [ 7.199587] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, b0 [ 7.208093] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1 [ 7.215520] usb usb2: Product: xHCI Host Controller
[ 7.220522] usb usb2: Manufacturer: Linux 5.10.120-tegra xhci-hcd
[ 7.226777] usb usb2: SerialNumber: 3610000.xhci
[ 7.232133] hub 2-0:1.0: USB hub found
[ 7.236001] hub 2-0:1.0: 4 ports detected
[ 7.263299] i2c i2c-2: Added multiplexed i2c bus 9
[ 7.269007] i2c i2c-2: Added multiplexed i2c bus 10
[ 7.274023] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter
[ 7.281010] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurreg [ 7.302858] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequz [ 7.315538] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequz [ 7.327442] tegra194-cpufreq e000000.ccplex: probed with ICC, cl:3
[ 7.335377] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator
[ 7.336776] sdhci-tegra 3400000.sdhci: Got CD GPIO
[ 7.342890] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges:
[ 7.353943] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff0 [ 7.356053] irq: IRQ294: trimming hierarchy from :interrupt-controller@f40001 [ 7.362630] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff0 [ 7.370299] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 294
[ 7.378930] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff0 [ 7.453560] usb 1-2: new high-speed USB device number 2 using tegra-xusb
[ 7.485745] tegra194-pcie 14100000.pcie: Link up
[ 7.492180] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00
[ 7.499001] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 7.504635] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus add) [ 7.514471] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20affffff) [ 7.525298] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7fffff] [ 7.533232] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400
[ 7.539575] pci 0001:00:00.0: PME# supported from D0 D3hot
[ 7.550854] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000
[ 7.557190] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 7.563123] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit] [ 7.571591] pci 0001:01:00.0: supports D1 D2
[ 7.575979] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 7.588107] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80ffff] [ 7.595530] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 7.601880] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff] [ 7.609869] pci 0001:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 7.616166] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 7.621533] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff]
[ 7.627794] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 7.632222] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bc0 [ 7.635155] pci 0001:00:00.0: Max Payload Size set to 128/ 256 (was 256), 2 [ 7.643589] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.652340] pci 0001:01:00.0: Max Payload Size set to 128/ 128 (was 128), 2 [ 7.659616] usb 1-2: Product: 4-Port USB 2.0 Hub
[ 7.668663] pcieport 0001:00:00.0: Adding to iommu group 8
[ 7.673045] usb 1-2: Manufacturer: Generic
[ 7.675866] hub 1-2:1.0: USB hub found
[ 7.678976] pcieport 0001:00:00.0: PME: Signaling with IRQ 55
[ 7.684279] hub 1-2:1.0: 4 ports detected
[ 7.687655] pcieport 0001:00:00.0: AER: enabled with IRQ 55
[ 7.703682] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator
[ 7.711966] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges:
[ 7.719126] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff0 [ 7.727808] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff0 [ 7.736486] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff0 [ 7.750293] usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using tegrb [ 7.796492] usb 2-1: New USB device found, idVendor=0bda, idProduct=0489, bc0 [ 7.804908] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.812251] usb 2-1: Product: 4-Port USB 3.0 Hub
[ 7.816993] usb 2-1: Manufacturer: Generic
[ 7.831948] hub 2-1:1.0: USB hub found
[ 7.838263] hub 2-1:1.0: 4 ports detected
[ 7.913749] usb 1-3: new full-speed USB device number 3 using tegra-xusb
[ 8.073960] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bc0 [ 8.082392] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.089752] usb 1-3: Product: Bluetooth Radio
[ 8.094232] usb 1-3: Manufacturer: Realtek
[ 8.098451] usb 1-3: SerialNumber: 00e04c000001
[ 8.837981] tegra194-pcie 14160000.pcie: Phy link never came up
[ 8.844145] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00
[ 8.850953] pci_bus 0004:00: root bus resource [bus 00-ff]
[ 8.856588] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus ) [ 8.866685] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242ffffff) [ 8.877510] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427fffff] [ 8.885428] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400
[ 8.891768] pci 0004:00:00.0: PME# supported from D0 D3hot
[ 8.907136] pci 0004:00:00.0: PCI bridge to [bus 01-ff]
[ 8.912527] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), 2 [ 8.921576] pcieport 0004:00:00.0: Adding to iommu group 9
[ 8.927474] pcieport 0004:00:00.0: PME: Signaling with IRQ 57
[ 8.934347] pcieport 0004:00:00.0: AER: enabled with IRQ 57
[ 8.940357] pci_bus 0004:01: busn_res: [bus 01-ff] is released
[ 8.946466] pci 0004:00:00.0: Removing from iommu group 9
[ 8.952020] pci_bus 0004:00: busn_res: [bus 00-ff] is released
[ 8.959765] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator
[ 8.967959] tegra194-pcie 141e0000.pcie: host bridge /pcie@141e0000 ranges:
[ 8.975138] tegra194-pcie 141e0000.pcie: IO 0x003e100000..0x003e1fffff0 [ 8.983824] tegra194-pcie 141e0000.pcie: MEM 0x3228000000..0x322fffffff0 [ 8.992501] tegra194-pcie 141e0000.pcie: MEM 0x2e40000000..0x3227ffffff0 [ 10.093979] tegra194-pcie 141e0000.pcie: Phy link never came up
[ 10.100130] tegra194-pcie 141e0000.pcie: PCI host bridge to bus 0007:00
[ 10.106939] pci_bus 0007:00: root bus resource [bus 00-ff]
[ 10.112573] pci_bus 0007:00: root bus resource [io 0x200000-0x2fffff] (bus ) [ 10.122669] pci_bus 0007:00: root bus resource [mem 0x3228000000-0x322ffffff) [ 10.133489] pci_bus 0007:00: root bus resource [mem 0x2e40000000-0x3227fffff] [ 10.141403] pci 0007:00:00.0: [10de:229a] type 01 class 0x060400
[ 10.147714] pci 0007:00:00.0: PME# supported from D0 D3hot
[ 10.162835] pci 0007:00:00.0: PCI bridge to [bus 01-ff]
[ 10.168222] pci 0007:00:00.0: Max Payload Size set to 256/ 256 (was 256), 2 [ 10.177254] pcieport 0007:00:00.0: Adding to iommu group 10
[ 10.183234] pcieport 0007:00:00.0: PME: Signaling with IRQ 59
[ 10.190105] pcieport 0007:00:00.0: AER: enabled with IRQ 59
[ 10.196608] pci_bus 0007:01: busn_res: [bus 01-ff] is released
[ 10.202733] pci 0007:00:00.0: Removing from iommu group 10
[ 10.208376] pci_bus 0007:00: busn_res: [bus 00-ff] is released
[ 10.216156] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator
[ 10.222943] vdd-3v3-sd: supplied by vdd-3v3
[ 10.229560] tegra194-isp5 14800000.isp: initialized
[ 10.246870] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized
[ 10.253344] (NULL device *): fops function table already registered
[ 10.260809] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized
[ 10.268180] sdhci-tegra 3400000.sdhci: Got CD GPIO
[ 10.273168] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator
[ 10.279964] irq: IRQ295: trimming hierarchy from :interrupt-controller@f40001 [ 10.287649] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 294
[ 10.402731] tegra194-pcie 140a0000.pcie: host bridge /pcie@140a0000 ranges:
[ 10.409899] tegra194-pcie 140a0000.pcie: IO 0x002a100000..0x002a1fffff0 [ 10.418580] tegra194-pcie 140a0000.pcie: MEM 0x3528000000..0x352fffffff0 [ 10.427253] tegra194-pcie 140a0000.pcie: MEM 0x3240000000..0x3527ffffff0 [ 10.541748] tegra194-pcie 140a0000.pcie: Link up
[ 10.550406] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00
[ 10.557209] pci_bus 0008:00: root bus resource [bus 00-ff]
[ 10.562846] pci_bus 0008:00: root bus resource [io 0x300000-0x3fffff] (bus ) [ 10.572940] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352ffffff) [ 10.583760] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527fffff] [ 10.591675] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400
[ 10.597998] pci 0008:00:00.0: PME# supported from D0 D3hot
[ 10.609174] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000
[ 10.615495] pci 0008:01:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 10.621408] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[ 10.628507] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 10.636533] pci 0008:01:00.0: supports D1 D2
[ 10.640927] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 10.653085] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280ffff] [ 10.660513] pci 0008:00:00.0: BAR 13: assigned [io 0x300000-0x300fff]
[ 10.667230] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff] [ 10.675201] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff] [ 10.683161] pci 0008:01:00.0: BAR 0: assigned [io 0x300000-0x3000ff]
[ 10.689800] pci 0008:00:00.0: PCI bridge to [bus 01-ff]
[ 10.695168] pci 0008:00:00.0: bridge window [io 0x300000-0x300fff]
[ 10.701785] pci 0008:00:00.0: bridge window [mem 0x3528000000-0x35280fffff] [ 10.709136] pci 0008:00:00.0: Max Payload Size set to 128/ 256 (was 256), 2 [ 10.717875] pci 0008:01:00.0: Max Payload Size set to 128/ 128 (was 128), 2 [ 10.726927] pcieport 0008:00:00.0: Adding to iommu group 11
[ 10.732932] pcieport 0008:00:00.0: PME: Signaling with IRQ 61
[ 10.739808] pcieport 0008:00:00.0: AER: enabled with IRQ 61
[ 10.746636] pva 16000000.pva0: deferred probe timeout, ignoring dependency
[ 10.753728] pva: probe of 16000000.pva0 failed with error -110
[ 10.759818] nvdla 15880000.nvdla0: deferred probe timeout, ignoring dependeny [ 10.767249] nvdla: probe of 15880000.nvdla0 failed with error -110
[ 10.773681] nvdla 158c0000.nvdla1: deferred probe timeout, ignoring dependeny [ 10.781106] nvdla: probe of 158c0000.nvdla1 failed with error -110
[ 10.788846] irq: IRQ297: trimming hierarchy from :pmc@c360000
[ 10.794834] irq: IRQ298: trimming hierarchy from :interrupt-controller@f40001 [ 10.802571] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 10.810478] tegra-se-nvhost 15810000.se: Adding to iommu group 51
[ 10.817192] tegra-se-nvhost 15810000.se: initialized
[ 10.832393] tegra-se-nvhost 15810000.se: tegra_se_probe: complete
[ 10.838821] tegra-se-nvhost 15820000.se: Adding to iommu group 52
[ 10.845399] tegra-se-nvhost 15820000.se: initialized
[ 10.853486] tegra-se-nvhost 15820000.se: tegra_se_probe: complete
[ 10.859901] tegra-se-nvhost 15840000.se: Adding to iommu group 53
[ 10.866498] tegra-se-nvhost 15840000.se: initialized
[ 10.876400] tegra-se-nvhost 15840000.se: tegra_se_probe: complete
[ 10.883419] tegra_actmon d230000.actmon: in actmon_register()...
[ 10.889797] tegra_actmon d230000.actmon: bwmgr_disable = 1
[ 10.896031] tegra_actmon d230000.actmon: initialization Completed for the del [ 10.904466] hvc_sysfs: hypervisor is not present
[ 10.944215] ALSA device list:
[ 10.947284] No soundcards found.
[ 10.951708] Freeing unused kernel memory: 3968K
[ 10.961590] Run /init as init process
[ 10.981591] Root device found: mmcblk1p1
[ 11.361648] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADt [ 11.621450] mmc1: new ultra high speed SDR104 SDHC card at address 59b4
[ 11.628839] mmcblk1: mmc1:59b4 SN32G 29.7 GiB
[ 11.772542] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15
[ 11.801561] Found dev node: /dev/mmcblk1p1
[ 12.312204] EXT4-fs (mmcblk1p1): 1 orphan inode deleted
[ 12.317626] EXT4-fs (mmcblk1p1): recovery complete
[ 12.474442] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. ) [ 12.485872] Rootfs mounted over mmcblk1p1
[ 12.500582] Switching from initrd to actual rootfs
[ 12.703014] systemd[1]: System time before build time, advancing clock.
[ 12.913541] systemd[1]: systemd 245.4-4ubuntu3.23 running in system mode. (+) [ 12.937312] systemd[1]: Detected architecture arm64.
[ 13.121614] systemd[1]: No hostname configured.
[ 13.126291] systemd[1]: Set hostname to
[ 13.512088] random: systemd: uninitialized urandom read (16 bytes read)
[ 13.519266] systemd[1]: local-fs.target: Found ordering cycle on local-fs-prt [ 13.527784] systemd[1]: local-fs.target: Found dependency on resizerootfs.set [ 13.536024] systemd[1]: local-fs.target: Found dependency on sysinit.target/t [ 13.543723] systemd[1]: local-fs.target: Found dependency on systemd-tmpfilet [ 13.552840] systemd[1]: local-fs.target: Found dependency on local-fs.targett [ 13.560630] systemd[1]: local-fs.target: Job local-fs-pre.target/start delett [ 13.726959] random: systemd: uninitialized urandom read (16 bytes read)
[ 13.733852] systemd[1]: system-getty.slice: unit configures an IP firewall, . [ 13.746599] systemd[1]: (This warning is only shown for the first unit using) [ 13.756402] systemd[1]: Created slice system-getty.slice.
[ 13.777592] random: systemd: uninitialized urandom read (16 bytes read)
[ 13.784737] systemd[1]: Created slice system-modprobe.slice.
[ 13.805897] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 13.825970] systemd[1]: Created slice User and Session Slice.
[ 13.845682] systemd[1]: Started Dispatch Password Requests to Console Direct. [ 13.869653] systemd[1]: Started Forward Password Requests to Wall Directory . [ 13.893883] systemd[1]: Set up automount Arbitrary Executable File Formats F. [ 13.917619] systemd[1]: Reached target Local Encrypted Volumes.
[ 13.937601] systemd[1]: Reached target Paths.
[ 13.953589] systemd[1]: Reached target Remote File Systems.
[ 13.973586] systemd[1]: Reached target Slices.
[ 13.989598] systemd[1]: Reached target Swap.
[ 14.005806] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 14.029672] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 14.192239] systemd[1]: Listening on Journal Audit Socket.
[ 14.213761] systemd[1]: Listening on Journal Socket (/dev/log).
[ 14.233747] systemd[1]: Listening on Journal Socket.
[ 14.253781] systemd[1]: Listening on udev Control Socket.
[ 14.273690] systemd[1]: Listening on udev Kernel Socket.
[ 14.295168] systemd[1]: Mounting Huge Pages File System...
[ 14.314991] systemd[1]: Mounting POSIX Message Queue File System...
[ 14.339097] systemd[1]: Mounting Kernel Debug File System...
[ 14.358972] systemd[1]: Mounting Kernel Trace File System...
[ 14.379433] systemd[1]: Starting Journal Service...
[ 14.399421] systemd[1]: Starting Create list of static device nodes for the . [ 14.427064] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[ 14.453770] systemd[1]: Condition check resulted in Load Kernel Module drm b. [ 14.464318] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 14.487303] systemd[1]: Starting Load Kernel Module pstore_blk...
[ 14.507230] systemd[1]: Starting Load Kernel Module pstore_zone...
[ 14.518578] urandom_read_iter: 28 callbacks suppressed
[ 14.518581] random: systemd-journal: uninitialized urandom read (16 bytes re) [ 14.532836] random: systemd-journal: uninitialized urandom read (16 bytes re) [ 14.541012] random: systemd-journal: uninitialized urandom read (16 bytes re) [ 14.551084] systemd[1]: Starting Load Kernel Module ramoops...
[ 14.569652] systemd[1]: Condition check resulted in OpenVSwitch configuratio. [ 14.580917] systemd[1]: Starting NVIDIA specific first-boot udev script...
[ 14.661887] systemd[1]: Condition check resulted in Set Up Additional Binary. [ 14.671309] systemd[1]: Condition check resulted in File System Check on Roo. [ 14.688874] systemd[1]: Starting Load Kernel Modules...
[ 14.707231] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 14.716763] nvmap_heap_init: nvmap_heap_init: created heap block cache
[ 14.721275] EXT4-fs (mmcblk1p1): re-mounted. Opts: (null)
[ 14.725555] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 02 [ 14.742450] tegra-carveouts tegra-carveouts: assigned reserved memory node vt [ 14.750691] nvmap_page_pool_init: Total RAM pages: 1659018
[ 14.756337] nvmap_page_pool_init: nvmap page pool size: 207377 pages (810 MB) [ 14.763774] nvmap_background_zero_thread: PP zeroing thread starting.
[ 14.763994] misc nvmap: created heap vpr base 0x0000000249800000 size (89292) [ 14.775521] systemd[1]: Starting udev Coldplug all Devices...
[ 14.799874] systemd[1]: Started Journal Service.
[ 15.011733] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [IN0 [ 15.011733]
[ 15.098682] random: crng init done
[ 15.102228] random: 18 urandom warning(s) missed due to ratelimiting
[ 15.197107] systemd-journald[247]: Received client request to flush runtime . [ 15.388822] systemd-journald[247]: File /var/log/journal/2c41f9ba60475501bc6. [ 16.157584] nvidia: loading out-of-tree module taints kernel.
[ 16.174898] imx219 9-0010: imx219_board_setup: error during i2c read probe () [ 16.187744] imx219 9-0010: board setup failed
[ 16.192333] imx219: probe of 9-0010 failed with error -121
[ 16.209307] imx219 10-0010: imx219_board_setup: error during i2c read probe ) [ 16.219466] fusb301 1-0025: toggle_time(0) is not updated
[ 16.228811] imx219 10-0010: board setup failed
[ 16.235104] imx219: probe of 10-0010 failed with error -121
[ 16.364887] platform regulatory.0: Direct firmware load for regulatory.db fa2 [ 16.373786] platform regulatory.0: Falling back to sysfs fallback for: regulb [ 16.824214] using random self ethernet address
[ 16.829395] using random host ethernet address
[ 17.481375] using random self ethernet address
[ 17.486307] using random host ethernet address
Ubuntu 20.04.6 LTS localhost ttyTCU0
localhost login:
It stucked in here nither accepting the password nor showing any error or any further output. What to do ?