search

qba667 / FlySkyI6

14 channels FW modifications for FlySky I6
GNU General Public License v3.0
287 stars 72 forks source link

Random values on model 13,14,15 from ch5 to the rest #87

Closed Gonnir closed 4 years ago

Gonnir commented 4 years ago

I use an Eachine i6 (rebranded Flysky i6) with Flyplus 1.7.5. I cant use those model memories just for 4 ch models because the values of the other channels are random values and barely effected by the switches i assign to them.

1074748905 commented 4 years ago

i have the same problem on fs-i6

1074748905 commented 4 years ago

and endpoint can not be saved in model 13 14 15

1074748905 commented 4 years ago

in model 13,if you change endpoints values, it will cause wrong ch1~ch8 values in other model.And then TX will not start (power on check) .

1074748905 commented 4 years ago

@qba667 can you fix the bug above i said？

qba667 commented 4 years ago

@1074748905 I just found what causing bug with models 13-15, in next build it will be fixed.

qba667 commented 4 years ago

@1074748905 can you verify change with attached file fs-i6_updater_05_02_15_23.zip

1074748905 commented 4 years ago

@1074748905 can you verify change with attached file fs-i6_updater_05_02_15_23.zip

@qba667 you deleate model 15,, only 1~14? after testing model 13and 14 ，i find there is no error。thank you！

1074748905 commented 4 years ago

qba667 i find a bigger bug，that bug cause great lag in pwm mode，do you see it？ https://github.com/qba667/FlySkyI6/issues/94

Yenya commented 4 years ago

@1074748905: see the discussion at #94.

As for model 13 to 15 data overwriting, I consider it fixed in 1.7.6. Should the problem persist, please reopen this issue.