search

qba667 / FlySkyI6

14 channels FW modifications for FlySky I6
GNU General Public License v3.0
287 stars 72 forks source link

WIiki - Missing ASL text #99

Closed llcool closed 4 years ago

llcool commented 4 years ago

Altitude calculation with TGY-CAT01. System setup -> Extra -> ASL Long press OK - set default value Short press OK change cursor between temperature at see level and pressure at see level. If desired value is altitude relative to start position change values to trigger: -pressure equals actual pressure -temperature equals actual pressure Altitude should be re-calculated on every value change.

Yenya commented 4 years ago

@llcool, thanks for your input. I tried to reword the text a bit (yet my English is not perfect, so corrections are welcome). Is it OK now?

https://github.com/qba667/FlySkyI6/wiki/ASL

llcool commented 4 years ago

Hi Yenya,

Nice work. :)

I would word it like this:-

Above Sea Level (ASL) Sensor

The pressure sensor, such as TGY-CAT01, can be configured in the System ⭢ Extra ⭢ ASL menu:

The sensor cannot compute the altitude by itself, so the computation is done inside the Tx firmware. Setup

The default values can be set by long pressing the OK button.

A short press of the OK button is used to change the between the pressure at the sea level and temperature. The a Altitude is calculated as altitude above the sea level.

If the desired value is altitude relative to start position To set the relative altitude, set the pressure and temperature a current pressure and temperature at the start position.

The altitude should be Altitude is re-calculated on every value change.

All the best,

Lloyd

On Thu, 28 May 2020 at 11:13, Yenya notifications@github.com wrote:

@llcool https://github.com/llcool, thanks for your input. I tried to reword the text a bit (yet my English is not perfect, so corrections are welcome). Is it OK now?

https://github.com/qba667/FlySkyI6/wiki/ASL

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/qba667/FlySkyI6/issues/99#issuecomment-635249946, or unsubscribe https://github.com/notifications/unsubscribe-auth/AASQ6ZOLAEXUD2D672TR3DLRTY2MTANCNFSM4NC642QA .

Yenya commented 4 years ago

@llcool: another try. Is it correct now? I had a bit of trouble decoding which parts of text do you want me to modify. I hope I understood you well.