Snapping options not saved on Windows - Githubissues

qgis / QGIS

QGIS is a free, open source, cross platform (lin/win/mac) geographical information system (GIS)

https://qgis.org

GNU General Public License v2.0

10.58k stars 3k forks source link

Snapping options not saved on Windows #21625

Closed qgib closed 5 years ago

qgib commented 9 years ago

Author Name: Roy Roge (Roy Roge) Original Redmine Issue: 13583 Affected QGIS version: 2.8.3 Redmine category:gui

In windows, even if you save a project with configured snapping options, snapping otions are not configured when you reopen the project

Create new project and load a shapefile configure some snapping options save the project and close. Reopen the project and check the snapping options, they are resetted.

snap_settings_project.png (Saber Razmjooei)

qgib commented 9 years ago

Author Name: Saber Razmjooei (@saberraz)

In my case, I saved it with the advanced mode. When I re-opened the project the snapping options showing Advanced mode but the dialog is for current layer (see attached).

9183 was configured as snap_settings_project.png

snap_settings_project.png (Saber Razmjooei)

qgib commented 9 years ago

Author Name: Nyall Dawson (@nyalldawson)

Saber - that issue was fixed as of ~48 hours ago. Can you retest with current master and report if this is still an issue?

status_id was changed from Open to Feedback

qgib commented 9 years ago

Author Name: Saber Razmjooei (@saberraz)

Confirmed. It works fine in master. Thanks Nyall.

status_id was changed from Feedback to Closed

qgib commented 9 years ago

Author Name: Roy Roge (Roy Roge)

Testing on Master 2.11.0 90 Snapping option for Current layer/All layers are still not saved;

Advanced settings are saved.

Thanks, Roy.

status_id was changed from Closed to Reopened

qgib commented 9 years ago

Author Name: Saber Razmjooei (@saberraz)

What code revision are you using? Works fine with all three modes in 5654eec.

status_id was changed from Reopened to Feedback

qgib commented 9 years ago

Author Name: Roy Roge (Roy Roge)

Testing on Master 2.11.0 90 code revision f50e1a7

qgib commented 9 years ago

Author Name: Saber Razmjooei (@saberraz)

It works fine on mine with the same code rev.

qgib commented 9 years ago

Author Name: Roy Roge (Roy Roge)

Saber are you using Windows platfom? if yes what ( windows 7, 8, 10) ?

I tested on Windows 10.

qgib commented 9 years ago

Author Name: Saber Razmjooei (@saberraz)

Windows 7, 64 bit - installed from OSGeo4W Debian jessie - compiled from source

Could you disable your plugins (renaming .qgis2 folder) and try again?

qgib commented 9 years ago

Author Name: Roy Roge (Roy Roge)

Removing the .qgis2 folder works;

Where are those config saved, in a sqlite db?

It also works on 2.8.3 now, very strange!

qgib commented 9 years ago

Author Name: Saber Razmjooei (@saberraz)

Must have been a user preference or a plugin issue.

status_id was changed from Feedback to Closed

qgib commented 9 years ago

Author Name: Roy Roge (Roy Roge)

Seems to be a plugin: Semi automatic classification pulgin