Closed Guest007 closed 10 years ago
I am using USA hosting for my site. It is only the co.za extention that makes it seem south-african...
I will include the assembly instruction on Github or Instructables when done.
Also try using http://www.downforeveryoneorjustme.com/reprap.harleystudio.co.za
According to this my site is up... It may be that your internet service provider is blocking the co.za extention.
Everybody knows that South-Africa only has criminals, and no real innovators, or any good content to share with the word, right? Perhaps you need to check with them first.
I have registered the domain reprapmorgan.com.
Who is your hosting through? I have had intermittent problems with your site but not in the last month.
It was recently moved to a large data-center. It may be why there is less hickups now.
On Wed, Jul 17, 2013 at 10:54 PM, NicholasSeward notifications@github.comwrote:
Who is your hosting through? I have had intermittent problems with your site but not in the last month.
— Reply to this email directly or view it on GitHubhttps://github.com/qharley/Morgan/issues/2#issuecomment-21144080 .
I'm also very interested in looking at your blog. :)
No such luck.
I can't even ping reprap.harleystudio.co.za steadily. Tried from Sweden (home ADSL) and Germany (Hetzner data center.) I succeeded once from Germany, but since then it keeps failing.
I also tried http://www.downforeveryoneorjustme.com/reprap.harleystudio.co.za. Most of the times it says OK, but it fails once in a while.
Maybe it's some firewall DoS protection being picky. Including traceroutes if you want to pass on to your hosting supplier. Both of them end with a series of no replies. (The last hop seems to change from trace to trace.)
Traceroute from Sweden:
4: cogent-tdc.se.ip.tdc.net 37.762ms asymm 6
5: te0-0-0-2.ccr22.sto03.atlas.cogentco.com 56.548ms asymm 8
6: te0-7-1-1.ccr42.ham01.atlas.cogentco.com 56.579ms asymm 7
7: te0-0-0-3.mpd22.ams03.atlas.cogentco.com 73.269ms asymm 8
8: te0-1-0-2.ccr22.lpl01.atlas.cogentco.com 79.227ms
9: te0-1-0-4.ccr22.ymq02.atlas.cogentco.com 162.743ms asymm 10
10: te0-6-0-5.ccr22.yyz02.atlas.cogentco.com 180.290ms
11: te0-7-0-2.ccr21.ord01.atlas.cogentco.com 177.158ms asymm 9
12: no reply
13: 38.104.184.50 194.139ms asymm 11
14: bfr.n-connect.net 193.160ms asymm 12
Traceroute from Germany:
4: ae55.edge7.Frankfurt1.Level3.net 7.503ms
5: ae-0-11.bar1.Munich1.Level3.net 15.396ms
6: te0-0-0-12.ccr21.fra06.atlas.cogentco.com 9.881ms asymm 8
7: te0-4-0-5.ccr21.fra03.atlas.cogentco.com 9.764ms
8: te0-1-0-2.mpd21.ams03.atlas.cogentco.com 16.357ms
9: te0-4-0-7.ccr22.lpl01.atlas.cogentco.com 26.412ms
10: te0-1-0-4.ccr22.ymq02.atlas.cogentco.com 96.200ms
11: te0-1-0-2.ccr21.ams03.atlas.cogentco.com 18.564ms asymm 8
12: te0-7-0-2.ccr21.ord01.atlas.cogentco.com 117.807ms
13: te0-3-0-1.ccr22.ymq02.atlas.cogentco.com 98.534ms asymm 10
14: 38.104.184.50 129.917ms
15: te0-0-0-2.ccr21.ord01.atlas.cogentco.com 118.271ms asymm 11
16: no reply
17: 38.104.184.50 132.209ms asymm 14
18: bfr.n-connect.net 130.495ms asymm 14
It has worked from Norway every time I've tried.
It has worked from Norway every time I've tried.
What's your ISP?
http://www.itistimed.com/?CentralForm=1&ACTION_TYPE=Whois&DATA=199.83.213.180
On Thu, Jul 25, 2013 at 8:29 PM, tommie notifications@github.com wrote:
It has worked from Norway every time I've tried.
What's your ISP?
— Reply to this email directly or view it on GitHubhttps://github.com/qharley/Morgan/issues/2#issuecomment-21574548 .
Doing some ad-hoc testing shows d1l.com (don't know what it is, but has an IP-address close to yours and traceroute seems the same) worked the first time I tried, but now it's just stalling.
Well...
I am definitely going to post the completed build instructions to both my site and the RepRap wiki
On Thu, Jul 25, 2013 at 8:41 PM, tommie notifications@github.com wrote:
Doing some ad-hoc testing shows d1l.com (don't know what it is, but has an IP-address close to yours and traceroute seems the same) worked the first time I tried, but now it's just stalling.
— Reply to this email directly or view it on GitHubhttps://github.com/qharley/Morgan/issues/2#issuecomment-21575339 .
I am definitely going to post the completed build instructions to both my site and the RepRap wiki
I was hoping to read the blog. I've sort-of fallen in love with SCARA and delta robots, and I'm trying to find all videos and images I can. ;)
Anyways. Now you know more than one cannot access (and that kefir- can access) it. Posting to the Wiki is probably enough on a bigger scale.
Is there no way to use a proxy to get to the blog?
On Thu, Jul 25, 2013 at 8:50 PM, tommie notifications@github.com wrote:
I am definitely going to post the completed build instructions to both my site and the RepRap wiki
I was hoping to read the blog. I've sort-of fallen in love with SCARA and delta robots, and I'm trying to find all videos and images I can. ;)
Anyways. Now you know more than one cannot access (and that kefir- can access) it. Posting to the Wiki is probably enough on a bigger scale.
— Reply to this email directly or view it on GitHubhttps://github.com/qharley/Morgan/issues/2#issuecomment-21575934 .
Is there no way to use a proxy to get to the blog?
There is. E.g. http://hidemyass.com/ works.
I've tried several. Home, mobile, and probably others.
Seems problems have gone away...
Hello.
Your site is completely unavailable. Can you place assembly instruction here (github) or on another international (not co.za) hosting?
Thank you for your great work!