Open mlcivilengineer opened 1 year ago
reading through the issues, I think it is the same problem happening on the issue #18531. Maybe this #17569 is related as well
This is most likely 17569
I can confirm that this is still an issue on Ubuntu 22.04. And on Windows 10 there is no problem. Any updates if this will get fixed soon? As it a very annoying bug.
I can confirm that this is still an issue on Ubuntu 22.04. And on Windows 10 there is no problem. Any updates if this will get fixed soon? As it a very annoying bug.
With my experiments, the problem was OS agnostic. You may not be experiencing the issue on Windows because the repeat delay of the keyboard presses are set to a high value. Try setting the repeat delay to a much lower value and the issue may appear, at least that is what I found.
With my experiments, the problem was OS agnostic. You may not be experiencing the issue on Windows because the repeat delay of the keyboard presses are set to a high value. Try setting the repeat delay to a much lower value and the issue may appear, at least that is what I found.
I tried adjusting all the setting related to keyboard on Ubuntu but it did not work. Any other way to fix this?
Not 100% sure we had the same issue but I solved my problem by changing my layer key from TT(1)
to MO(1)
.
Describe the Bug
I have 2 layers, one 0 layer that outputs "d" and "f", and if I hold the modifier it goes to layer 1 and outputs "(" and ")".
The problem is if I hold the modifier and start typing really fast ()()()()()()()(). The output that I get is: ()()()(09)()()()()()90909090909)()()()90()()90() instead of ()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()(). It seems I get the unshifted version of the braces out of nowhere and I don't understand why this is happening. This also happen with other keys such as _ outputting - instead. This problem is occurring on Ubuntu 22.04 and windows 11 and the bug does not appear in another keyboard (corsair k68) so I know the problem is not in the computer itself. I found that if I set the repeat delay for a keypress to be very low the issue is easier to see and happens way more. If I set the repeat delay to be very high, the issue almost disappears.
The following link shows my current layout: https://configure.zsa.io/moonlander/layouts/0LOEP/QEYlV/0
Keyboard Used
Moonlander
Link to product page (if applicable)
https://www.zsa.io/moonlander/
Operating System
Ubuntu 22.04 and Windows 11
qmk doctor Output
No response
Is AutoHotKey / Karabiner installed
Other keyboard-related software installed
No response
Additional Context
my keymap.c file: