Open GoogleCodeExporter opened 9 years ago
Try an older DD-WRT build and see if it is successful. This will provide clues
as to whether this is a new development. There has been at least one change to
the DD-WRT web UI that will prevent it from being extracted. Other than that
change, perhaps no applicable changes were made to more recent versions of
DD-WRT. Nobody has gotten around to playing cat and mouse with their latest
attempt to make their 'free open source' software as difficult as possible to
change.
Original comment by jeremy.collake@gmail.com
on 29 Apr 2012 at 8:56
This particular firmware version is DD-WRT v24-sp2 (11/02/09) std-nokaid, and I
have tried other versions as well, some dating back to 2008 with no luck, same
results each time. Mainly I just want to insert a correct ssl certificate for
my usage and some packages for IPv6 related.
Original comment by pmcefx
on 29 Apr 2012 at 9:26
[deleted comment]
Replacing previous comment. I'll look at it when I get a chance. I don't know
what would cause the failure, especially when testing against older DD-WRT
builds. Perhaps some errata was introduced into the FMK itself, I haven't tried
extracting and rebuilding DD-WRT myself anytime recently. When I check up on
it, I'll update this issue.
Original comment by jeremy.collake@gmail.com
on 29 Apr 2012 at 9:34
pmcefx, you'll have to provide the exact DD-WRT firmware image you are working
with. I just successfully extracted and re-built a DD-WRT image for the WRT160N
router (v24-SP2, build 14896) with the latest FMK trunk.
Original comment by heffne...@gmail.com
on 8 Jul 2012 at 12:07
First in question. I get errors with either image as described above.
Original comment by pmcefx
on 12 Jul 2012 at 8:56
Attachments:
Second in question.
Original comment by pmcefx
on 12 Jul 2012 at 8:58
Attachments:
Since Craig tested with build 14896 and you are using 13064, is there a reason
you can't upgrade to 14896? Also, the issue may be your PC configuration or
pre-requisites, as those older images should have worked.. though now the new
images do too thanks to Craig.
Original comment by jeremy.collake@gmail.com
on 12 Jul 2012 at 8:58
Some features I use were lost in the newer builds. As far as testing with my
setup, I resorted to sticking with what works best for features, speed of
pass-thru, etc.
Original comment by pmcefx
on 12 Jul 2012 at 9:02
Also I tried with several downloads, all prerequisites were met for
dependencies, on a dual-core 2.8G Dell, like I stated before, I am always using
this unit for compiling.
Original comment by pmcefx
on 12 Jul 2012 at 9:04
Indeed, DD-WRT is prone to extreme ... variances .. between what works in any
particular build, in my opinion. So, question answered ;).
Original comment by jeremy.collake@gmail.com
on 12 Jul 2012 at 9:04
Original issue reported on code.google.com by
pmcefx
on 29 Apr 2012 at 7:41