Windows 10: panic during OpenGL initialization

[zhangyixing3]

Hi, dear sir.

I am looking forward to trying this tool. However, when I use strangepg, I encounter an error:

## example 1
$ strangepg -l pfr -t 8 03.232.gfa 
[sapp][panic][id:48][line:11280] 
ABORTING because of [panic]
Aborted (core dumped)

## example 2
$ strangepg  00.gfa 
collectgfanodes: done
[sapp][panic][id:48][line:11280] 
ABORTING because of [panic]
Aborted (core dumped)

I installed strangepg using conda. strangepg version

$ strangepg -v
0.8.6

Linux system info

$ uname -a
Linux mn01 3.10.0-1062.el7.x86_64 #1 SMP Wed Aug 7 18:08:02 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

I am not familiar with C language. Could you please give me some advice on how to resolve this issue?

Thank you!

[qwx9]

Hi, could you give a few more details about your setup?

• Which linux distribution are you using?
• Is this under WSL on Windows?
• What kind of CPU and graphics chip does the machine you are running it on have?

The only such issue I know of is trying to run this on Ubuntu under WSL, with the exact same error. OpenGL initialization fails but the logger doesn't provide more details. It might have to do with sokol_gfx's minimum supported GL version (IIRC 4.1), or maybe the use of OpenGL itself. Unfortunately I don't currently have access to a Windows machine to debug this. Perhaps if it's the same issue it could give us some hints.

[zhangyixing3]

I'm not on a WSL system and on a small server. I want to use a graphical interface tool to access the graphical interface of the remote server. linux distribution information

Wed Oct 09 09:08:09 stu_zhangyixing mn01~
$ cat /etc/os-release
NAME="CentOS Linux"
VERSION="7 (Core)"
ID="centos"
ID_LIKE="rhel fedora"
VERSION_ID="7"
PRETTY_NAME="CentOS Linux 7 (Core)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:centos:centos:7"
HOME_URL="https://www.centos.org/"
BUG_REPORT_URL="https://bugs.centos.org/"
CENTOS_MANTISBT_PROJECT="CentOS-7"
CENTOS_MANTISBT_PROJECT_VERSION="7"
REDHAT_SUPPORT_PRODUCT="centos"
REDHAT_SUPPORT_PRODUCT_VERSION="7"

CPU information

Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                64
On-line CPU(s) list:   0-63
Thread(s) per core:    2
Core(s) per socket:    16
Socket(s):             2
NUMA node(s):          2
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 85
Model name:            Intel(R) Xeon(R) Gold 5218 CPU @ 2.30GHz
Stepping:              7
CPU MHz:               2300.000
BogoMIPS:              4600.00
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              1024K
L3 cache:              22528K
NUMA node0 CPU(s):     0-15,32-47
NUMA node1 CPU(s):     16-31,48-63
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb cat_l3 cdp_l3 intel_ppin intel_pt ssbd mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a avx512f avx512dq rdseed adx smap clflushopt clwb avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1 cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts hwp_epp pku ospke avx512_vnni md_clear spec_ctrl intel_stibp flush_l1d arch_capabilities

graphics information

$ lspci | grep -i vga
02:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200e [Pilot] ServerEngines (SEP1) (rev 42)

[qwx9]

Thanks, though am I correct in assuming that these are the remote machine's specs and that you are sitting in front of a second machine connected to that remote server, and using something like X11 forwarding? If so, please post the specs of your local machine. From what I understand, the GPU of the machine above is only a basic card capable of driving a small resolution display for diagnostics only, used in rack servers and similar, and the Xeon does not have an integrated graphics chip either, so I'd be surprised if this is the only machine in the setup.

[zhangyixing3]

I correct in assuming that these are the remote machine's specs and that you are sitting in front of a second machine connected to that remote server, and using something like X11 forwarding?

Yes, I use tools like Xshell, SFTP, and X11 to access the remote server. This server is rack servers and does not have GPU computing capabilities. I checked both the compute nodes and the login node of this server using lspci | grep -E "VGA|NVIDIA", and the result both were : 02:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200e [Pilot] ServerEngines (SEP1) (rev 42). Matrox MGA G200e is the only GPU of the machine.

If so, please post the specs of your local machine.

Win 10 CPU : 11th Gen lntel Core i5-11400 @ 2.60GHz GPU : intel UHD Graphics 730 ABORTING is likely not related to my local computer.

[qwx9]

Ah! So you are indeed on a Windows computer, even though you are not using WSL on it? If that is the case, it would seem that strangepg is broken on Windows as a whole. I don't have access to a Windows computer to debug this right now, but I'll get one soon.

[zhangyixing3]

I ran strangepg on a remote server, but it returned an error In a few seconds. After checking the GPU, We found that it is too poor or outdated, I believe that error with strangepg should not be related to my personal computer (win 10). My computer is just used to connect to the server. I apologize for my poor English; I may have caused you some trouble.

[qwx9]

No worries, I think I understand. strangepg uses hardware acceleration and requires at least OpenGL 4.1, ideally 4.3, which date back from 2011-2012, so it makes sense that it wouldn't work on the server if it only has the Matrox card. On Windows, the problem is indeed not the machine, but some assumption that isn't met. I'm not sure anyone has really tried to run something built with that particular graphics framework in that way since it's mostly used for rendering in 3D games, there's no reason to do anything like X forwarding there. I'll investigate once I have some time with a Windows machine on hand. Thanks for testing! I'll update the issue's title.

[zhangyixing3]

I look forward to your good news ！