search

radhoo / uradmonitor_kit1

A hackable open source sensor IoT board with network interface. A DIY Geiger counter KIT to contribute readings to the uRADMonitor network.
http://www.uradmonitor.com/open-source-uradmonitor-kit1/
GNU General Public License v3.0
78 stars 26 forks source link

Tube connectors missing in BOM #1

Closed berezovskyi closed 7 years ago

berezovskyi commented 8 years ago

Hi, I looked at the https://github.com/radhoo/uradmonitor_kit1/blob/master/pcb-1.1/res/uRADMonitor_KIT1.1_bom.txt#L7 but found no connectors (slots) in BOM for the SBM-20 tube.

Do you have any hints on how to find them?

radhoo commented 8 years ago

Hello, please use fuse holders, 6mm diameter as connectors.

berezovskyi commented 8 years ago

Brilliant, @radhoo! I think the best way for others to find them would be to search for 6.3mm (1/4") fuse clip

berezovskyi commented 8 years ago

Littelfuse 01020071Z seems to be a good generic part

radhoo commented 8 years ago

Yes, and there are very affordable ones on Ebay as well. I got a bag of 100pcs for just a few dollars.

On Sun, Dec 20, 2015 at 11:58 PM, Andrew Berezovskyi < notifications@github.com> wrote:

Littelfuse 01020071Z seems to be a good generic part

— Reply to this email directly or view it on GitHub https://github.com/radhoo/uradmonitor_kit1/issues/1#issuecomment-166157784 .