Silkscreen PCB 1.2.105 - Transistors on HV part

radhoo / uradmonitor_kit1

A hackable open source sensor IoT board with network interface. A DIY Geiger counter KIT to contribute readings to the uRADMonitor network.

GNU General Public License v3.0

78 stars 26 forks source link

Closed MalteP closed 7 years ago

MalteP commented 7 years ago

On the PCB silkscreen the text for T1 is marked with the wrong type "2N2907" and T6 is marked with "MPSA42" which should be swapped.

radhoo commented 7 years ago

Yes, you are right. I will fix it soon. Thanks! (please see my other email, I just sent you).

andrew-xdn commented 7 years ago

Hello! Found the same issue on the image files (uradmonitor_kit1/pcb/1.2.105/circuit/kit1_105_pcb.png, http://www.uradmonitor.com/wordpress/wp-content/uploads/2016/10/pcb_opensource_kit_105_pcb.jpg). It's a little confusing if you use one of the images to mount components.

jetty840 commented 7 years ago

Only caught that one by accident when I was looking for the part in Eagle

radhoo commented 7 years ago

fixed in 1.2.106