DasBasti
commented
1 year ago Sometimes boot goes further but also stops responding:
Closed DasBasti closed 1 year ago
DasBasti
commented
1 year ago Sometimes boot goes further but also stops responding:
DasBasti
commented
1 year ago I changed the monitor that is connected to HDMI. This now leads to a booting system. Once I start chromium it crashes again. Screen turns green.
RadxaStephen
commented
1 year ago So far HDMI doesn't support hot plug. Please plug in HDMI cable before powering on 5B.
Also I have updated meta-rockchip (https://github.com/radxa/meta-rockchip/commit/ce4df95929be710e0c6f6aa2e71e5262fab03bcb) to get newer kernel for better monitor compatibility.
I have built one core-image-sato, there is desktop showing on my aoc monitor.
For Chromium issue, I don't test it yet. I will continue to test chromium.
RadxaStephen
commented
1 year ago Sometimes boot goes further but also stops responding: Console log of booting Kernel
[ 0.962541] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.962567] Linux version 5.10.110-rockchip-standard (oe-user@oe-host) (aarch64-poky-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP Fri Jan 6 12:17:55 UTC 2023 [ 0.977412] Machine model: Radxa ROCK 5B [ 0.977497] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '') [ 0.980517] printk: bootconsole [uart8250] enabled [ 0.983978] efi: UEFI not found. [ 0.991724] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB [ 0.992798] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB [ 0.993980] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB [ 0.994723] OF: reserved mem: initialized node cma, compatible id shared-dma-pool [ 1.147561] Zone ranges: [ 1.147812] DMA [mem 0x0000000000200000-0x00000000ffffffff] [ 1.148387] DMA32 empty [ 1.148656] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 1.149227] Movable zone start for each node [ 1.149620] Early memory node ranges [ 1.149951] node 0: [mem 0x0000000000200000-0x00000000083fffff] [ 1.150528] node 0: [mem 0x0000000009400000-0x00000000efffffff] [ 1.151106] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 1.151685] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff] [ 1.195430] psci: probing for conduit method from DT. [ 1.195906] psci: PSCIv1.1 detected in firmware. [ 1.196332] psci: Using standard PSCI v0.2 function IDs [ 1.196816] psci: Trusted OS migration not required [ 1.197268] psci: SMC Calling Convention v1.2 [ 1.198102] percpu: Embedded 32 pages/cpu s93032 r8192 d29848 u131072 [ 1.198923] Detected VIPT I-cache on CPU0 [ 1.199341] CPU features: detected: GIC system register CPU interface [ 1.199935] CPU features: detected: Virtualization Host Extensions [ 1.200508] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 1.201157] alternatives: patching kernel code [ 1.201964] Built 1 zonelists, mobility grouping on. Total pages: 1995336 [ 1.202601] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.verifiedbootstate=orange androidboot.serialno=a95ea83140e3f0dd rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000 [ 1.206312] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 1.207503] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 1.208226] mem auto-init: stack:off, heap alloc:off, heap free:off [ 1.216141] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB) [ 1.295422] Memory: 7591464K/8108032K available (14784K kernel code, 3240K rwdata, 5836K rodata, 6336K init, 542K bss, 254424K reserved, 262144K cma-reserved) [ 1.296881] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 1.297519] ftrace: allocating 57327 entries in 224 pages [ 1.400524] ftrace: allocated 224 pages with 3 groups [ 1.401322] rcu: Hierarchical RCU implementation. [ 1.401760] rcu: RCU event tracing is enabled. [ 1.402179] Rude variant of Tasks RCU enabled. [ 1.402596] Tracing variant of Tasks RCU enabled. [ 1.403038] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 1.408945] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 1.412504] GICv3: GIC: Using split EOI/Deactivate mode [ 1.412990] GICv3: 480 SPIs implemented [ 1.413344] GICv3: 0 Extended SPIs implemented [ 1.413784] GICv3: Distributor has no Range Selector support [ 1.414312] GICv3: 16 PPIs implemented [ 1.414702] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000 [ 1.415468] ITS [mem 0xfe640000-0xfe65ffff] [ 1.415909] ITS@0x00000000fe640000: allocated 8192 Devices @1001e0000 (indirect, esz 8, psz 64K, shr 0) [ 1.416796] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001f0000 (flat, esz 2, psz 64K, shr 0) [ 1.417749] ITS: using cache flushing for cmd queue [ 1.418232] ITS [mem 0xfe660000-0xfe67ffff] [ 1.418665] ITS@0x00000000fe660000: allocated 8192 Devices @100210000 (indirect, esz 8, psz 64K, shr 0) [ 1.419550] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100220000 (flat, esz 2, psz 64K, shr 0) [ 1.420502] ITS: using cache flushing for cmd queue [ 1.421235] GICv3: using LPI property table @0x0000000100230000 [ 1.421924] GIC: using cache flushing for LPI property table [ 1.422450] GICv3: CPU0: using allocated LPI pending table @0x0000000100240000 [ 1.423298] random: get_random_bytes called from start_kernel+0x3dc/0x5d4 with crng_init=0 [ 1.571647] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 1.572973] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 1.573970] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 1.576206] Console: colour dummy device 80x25 [ 1.576650] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 1.577600] pid_max: default: 32768 minimum: 301 [ 1.578134] LSM: Security Framework initializing [ 1.578631] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.579347] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.582125] rcu: Hierarchical SRCU implementation. [ 1.583410] Platform MSI: msi-controller@fe640000 domain created [ 1.584011] Platform MSI: msi-controller@fe660000 domain created [ 1.584991] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created [ 1.585770] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created [ 1.586762] EFI services will not be available. [ 1.587588] smp: Bringing up secondary CPUs ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot [ 1.589319] Detected VIPT I-cache on CPU1 [ 1.589359] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000 [ 1.589379] GICv3: CPU1: using allocated LPI pending table @0x0000000100250000 [ 1.589430] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 1.590811] Detected VIPT I-cache on CPU2 [ 1.590843] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000 [ 1.590861] GICv3: CPU2: using allocated LPI pending table @0x0000000100260000 [ 1.590908] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 1.592255] Detected VIPT I-cache on CPU3 [ 1.592284] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000 [ 1.592301] GICv3: CPU3: using allocated LPI pending table @0x0000000100270000 [ 1.592343] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 1.593690] CPU features: detected: Spectre-v4 [ 1.593693] CPU features: detected: Spectre-BHB [ 1.593696] Detected PIPT I-cache on CPU4 [ 1.593712] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000 [ 1.593723] GICv3: CPU4: using allocated LPI pending table @0x0000000100280000 [ 1.593751] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0] [ 1.595072] Detected PIPT I-cache on CPU5 [ 1.595090] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000 [ 1.595101] GICv3: CPU5: using allocated LPI pending table @0x0000000100290000 [ 1.595132] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0] [ 1.596430] Detected PIPT I-cache on CPU6 [ 1.596447] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000 [ 1.596457] GICv3: CPU6: using allocated LPI pending table @0x00000001002a0000 [ 1.596486] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0] [ 1.597779] Detected PIPT I-cache on CPU7 [ 1.597797] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000 [ 1.597807] GICv3: CPU7: using allocated LPI pending table @0x00000001002b0000 [ 1.597837] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0] [ 1.597917] smp: Brought up 1 node, 8 CPUs [ 1.615054] SMP: Total of 8 processors activated. [ 1.615498] CPU features: detected: Privileged Access Never [ 1.616012] CPU features: detected: User Access Override [ 1.616503] CPU features: detected: 32-bit EL0 Support [ 1.616978] CPU features: detected: Common not Private translations [ 1.617556] CPU features: detected: RAS Extension Support [ 1.618055] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 1.618856] CPU features: detected: CRC32 instructions [ 1.619331] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 1.619972] CPU features: detected: RCpc load-acquire (LDAPR) [ 1.620582] CPU: All CPU(s) started at EL2 [ 1.622629] devtmpfs: initialized [ 1.638425] Registered cp15_barrier emulation handler [ 1.638908] Registered setend emulation handler [ 1.639415] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 1.640326] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 1.643731] pinctrl core: initialized pinctrl subsystem [ 1.644525] DMI not present or invalid. [ 1.645117] NET: Registered protocol family 16 [ 1.646461] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.647235] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.648614] thermal_sys: Registered thermal governor 'fair_share' [ 1.648617] thermal_sys: Registered thermal governor 'step_wise' [ 1.649184] thermal_sys: Registered thermal governor 'user_space' [ 1.649743] thermal_sys: Registered thermal governor 'power_allocator' [ 1.650452] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ 1.651847] thermal thermal_zone2: power_allocator: sustainable_power will be estimated [ 1.652621] thermal thermal_zone3: power_allocator: sustainable_power will be estimated [ 1.653395] thermal thermal_zone4: power_allocator: sustainable_power will be estimated [ 1.654169] thermal thermal_zone5: power_allocator: sustainable_power will be estimated [ 1.654943] thermal thermal_zone6: power_allocator: sustainable_power will be estimated [ 1.655712] cpuidle: using governor menu [ 1.656085] Registered FIQ tty driver [ 1.656604] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 1.657367] ASID allocator initialised with 65536 entries [ 1.659514] ramoops: dmesg-0 0x20000@0x0000000000110000 [ 1.660014] ramoops: console 0x80000@0x0000000000130000 [ 1.660508] ramoops: pmsg 0x50000@0x00000000001b0000 [ 1.661289] printk: console [ramoops-1] enabled [ 1.661712] pstore: Registered ramoops as persistent store backend [ 1.662287] ramoops: using 0xf0000@0x110000, ecc: 0 [ 1.712741] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000 [ 1.713583] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000 [ 1.714392] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000 [ 1.715245] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000 [ 1.716075] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000 [ 1.716737] rockchip-pinctrl pinctrl: probed pinctrl [ 1.731735] fiq_debugger fiq_debugger.0: IRQ fiq not found [ 1.732254] fiq_debugger fiq_debugger.0: IRQ wakeup not found [ 1.732792] fiq_debugger_probe: could not install nmi irq handler [[ 1.733419] printk: console [ttyFIQ0] enabled 1.733419] printk: console [ttyFIQ0] enabled [ 1.734206] printk: bootconsole [uart8250] disabled [ 1.734206] printk: bootconsole [uart8250] disabled [ 1.734734] Registered fiq debugger ttyFIQ0 [ 1.735201] vcc5v0_sys: supplied by vcc12v_dcin [ 1.735601] vcc_1v1_nldo_s3: supplied by vcc5v0_sys [ 1.735846] vcc5v0_host: supplied by vcc5v0_sys [ 1.736009] vcc3v3_pcie2x1l0: supplied by vcc5v0_sys [ 1.793625] vcc3v3_pcie30: supplied by vcc5v0_sys [ 1.793953] iommu: Default domain type: Translated [ 1.794045] rk_iommu fdab9000.iommu: version = 2 [ 1.794446] rk_iommu fdb50800.iommu: version = 2 [ 1.794686] rk_iommu fdb60f00.iommu: version = 2 [ 1.794885] rk_iommu fdb70f00.iommu: version = 2 [ 1.795050] rk_iommu fdb90480.iommu: version = 2 [ 1.795229] rk_iommu fdba0800.iommu: version = 2 [ 1.795414] rk_iommu fdba4800.iommu: version = 2 [ 1.795598] rk_iommu fdba8800.iommu: version = 2 [ 1.795778] rk_iommu fdbac800.iommu: version = 2 [ 1.795959] rk_iommu fdbb0800.iommu: version = 2 [ 1.796137] rk_iommu fdbdf000.iommu: version = 2 [ 1.796372] rk_iommu fdbef000.iommu: version = 2 [ 1.796626] rk_iommu fdc38700.iommu: version = 2 [ 1.796900] rk_iommu fdc48700.iommu: version = 2 [ 1.797051] rk_iommu fdd97e00.iommu: version = 2 [ 1.797415] SCSI subsystem initialized [ 1.797505] usbcore: registered new interface driver usbfs [ 1.797522] usbcore: registered new interface driver hub [ 1.797540] usbcore: registered new device driver usb [ 1.797580] mc: Linux media interface: v0.10 [ 1.797592] videodev: Linux video capture interface: v2.00 [ 1.797620] pps_core: LinuxPPS API ver. 1 registered [ 1.797625] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [giometti@linux.it](mailto:giometti@linux.it) [ 1.797632] PTP clock support registered [ 1.797920] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 1.797962] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 1.799177] Advanced Linux Sound Architecture Driver Initialized. [ 1.800696] rockchip-cpuinfo cpuinfo: SoC : 35880000 [ 1.800703] rockchip-cpuinfo cpuinfo: Serial : 33697e094be3670b [ 1.801066] clocksource: Switched to clocksource arch_sys_counter [ 2.241625] VFS: Disk quotas dquot_6.6.0 [ 2.241665] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.245136] NET: Registered protocol family 2 [ 2.245306] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 2.247324] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear) [ 2.247430] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 2.247788] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 2.248596] TCP: Hash tables configured (established 65536 bind 65536) [ 2.248752] MPTCP token hash table entries: 8192 (order: 6, 393216 bytes, linear) [ 2.248867] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear) [ 2.249032] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear) [ 2.249253] NET: Registered protocol family 1 [ 2.249610] RPC: Registered named UNIX socket transport module. [ 2.249617] RPC: Registered udp transport module. [ 2.249621] RPC: Registered tcp transport module. [ 2.249625] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.250033] PCI: CLS 0 bytes, default 64 [ 2.251047] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.251483] kvm [1]: IPA Size Limit: 40 bits [ 2.251499] kvm [1]: GICv3: no GICV resource entry [ 2.251503] kvm [1]: disabling GICv2 emulation [ 2.251508] kvm [1]: GIC system register CPU interface enabled [ 2.251662] kvm [1]: vgic interrupt IRQ9 [ 2.251847] kvm [1]: VHE mode initialized successfully [ 2.254590] Initialise system trusted keyrings [ 2.254704] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 2.257590] NFS: Registering the id_resolver key type [ 2.257605] Key type id_resolver registered [ 2.257609] Key type id_legacy registered [ 2.257647] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.257652] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.257666] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.258132] NET: Registered protocol family 38 [ 2.258140] Key type asymmetric registered [ 2.258144] Asymmetric key parser 'x509' registered [ 2.258160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 2.258166] io scheduler mq-deadline registered [ 2.258173] io scheduler kyber registered [ 2.267398] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success [ 2.268331] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success [ 2.271087] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node [ 2.271244] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node [ 2.271370] mpp_service mpp-srv: unknown mpp version for missing VCS info [ 2.271379] mpp_service mpp-srv: probe start [ 2.273292] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1 [ 2.273525] mpp_vdpu2 fdb50400.vdpu: probe device [ 2.273643] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0 [ 2.273652] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0 [ 2.273787] mpp_vdpu2 fdb50400.vdpu: probing finish [ 2.274022] mpp_vepu2 jpege-ccu: probing start [ 2.274029] mpp_vepu2 jpege-ccu: probing finish [ 2.274151] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5 [ 2.274325] mpp_vepu2 fdba0000.jpege-core: probing start [ 2.274466] mpp_vepu2 fdba0000.jpege-core: attach ccu success [ 2.274591] mpp_vepu2 fdba0000.jpege-core: probing finish [ 2.274710] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6 [ 2.274857] mpp_vepu2 fdba4000.jpege-core: probing start [ 2.274965] mpp_vepu2 fdba4000.jpege-core: attach ccu success [ 2.275107] mpp_vepu2 fdba4000.jpege-core: probing finish [ 2.275222] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7 [ 2.275367] mpp_vepu2 fdba8000.jpege-core: probing start [ 2.275481] mpp_vepu2 fdba8000.jpege-core: attach ccu success [ 2.275629] mpp_vepu2 fdba8000.jpege-core: probing finish [ 2.275746] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8 [ 2.275891] mpp_vepu2 fdbac000.jpege-core: probing start [ 2.276000] mpp_vepu2 fdbac000.jpege-core: attach ccu success [ 2.276134] mpp_vepu2 fdbac000.jpege-core: probing finish [ 2.276523] mpp-iep2 fdbb0000.iep: Adding to iommu group 9 [ 2.276545] rk-pcie fe170000.pcie: missing legacy IRQ resource [ 2.276559] rk-pcie fe170000.pcie: IRQ msi not found [ 2.276563] rk-pcie fe170000.pcie: use outband MSI support [ 2.276568] rk-pcie fe170000.pcie: Missing _config_ reg space [ 2.276577] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges: [ 2.276591] rk-pcie fe170000.pcie: err 0x00f2000000..0x00f20fffff -> 0x00f2000000 [ 2.276601] rk-pcie fe170000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000 [ 2.276610] rk-pcie fe170000.pcie: MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000 [ 2.276617] rk-pcie fe170000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0980000000 [ 2.276644] rk-pcie fe170000.pcie: Missing _config_ reg space [ 2.276671] rk-pcie fe170000.pcie: invalid resource [ 2.287467] rk-pcie fe150000.pcie: missing legacy IRQ resource [ 2.287483] rk-pcie fe150000.pcie: IRQ msi not found [ 2.287487] rk-pcie fe150000.pcie: use outband MSI support [ 2.287492] rk-pcie fe150000.pcie: Missing _config_ reg space [ 2.287501] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges: [ 2.287516] rk-pcie fe150000.pcie: err 0x00f0000000..0x00f00fffff -> 0x00f0000000 [ 2.287526] rk-pcie fe150000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000 [ 2.287536] rk-pcie fe150000.pcie: MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000 [ 2.287543] rk-pcie fe150000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000 [ 2.287573] rk-pcie fe150000.pcie: Missing _config_ reg space [ 2.287581] mpp-iep2 fdbb0000.iep: probe device [ 2.287601] rk-pcie fe150000.pcie: invalid resource [ 2.287720] mpp-iep2 fdbb0000.iep: allocate roi buffer failed [ 2.287854] mpp-iep2 fdbb0000.iep: probing finish [ 2.288089] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4 [ 2.288303] mpp_jpgdec fdb90000.jpegd: probe device [ 2.288560] mpp_jpgdec fdb90000.jpegd: probing finish [ 2.288915] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start [ 2.288983] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish [ 2.289082] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12 [ 2.289330] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start [ 2.289456] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found! [ 2.289462] rkvdec2_init:1008: No niu aclk reset resource define [ 2.289467] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found! [ 2.289471] rkvdec2_init:1011: No niu hclk reset resource define [ 2.289503] mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled [ 2.289562] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001 [ 2.289567] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0 [ 2.289787] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000 [ 2.289792] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000 [ 2.289796] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520 [ 2.289801] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576 [ 2.289806] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512 [ 2.289842] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish [ 2.289922] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13 [ 2.290140] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start [ 2.290263] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found! [ 2.290268] rkvdec2_init:1008: No niu aclk reset resource define [ 2.290273] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found! [ 2.290277] rkvdec2_init:1011: No niu hclk reset resource define [ 2.290304] mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled [ 2.290347] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002 [ 2.290367] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1 [ 2.290629] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000 [ 2.290633] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000 [ 2.290638] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424 [ 2.290643] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576 [ 2.290648] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512 [ 2.290679] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish [ 2.290883] mpp_rkvenc2 rkvenc-ccu: probing start [ 2.290889] mpp_rkvenc2 rkvenc-ccu: probing finish [ 2.291023] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10 [ 2.291218] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start [ 2.291237] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8 [ 2.291407] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0 [ 2.291546] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish [ 2.291626] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11 [ 2.291828] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start [ 2.291847] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8 [ 2.292030] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1 [ 2.292167] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish [ 2.292499] mpp_av1dec: Adding child /av1d@fdc70000 [ 2.292729] mpp_av1dec: register device av1d-master [ 2.292911] mpp_av1dec av1d-master: probing start [ 2.292981] mpp_iommu_probe:405: failed to get device node [ 2.292988] mpp_av1dec av1d-master: failed to attach iommu [ 2.293161] mpp_av1dec av1d-master: probing finish [ 2.293200] mpp_service mpp-srv: probe success [ 2.301276] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.301284] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 2.302031] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.302038] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 2.302763] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.302770] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 2.303134] rockchip-pvtm fda40000.pvtm: pvtm@0 probed [ 2.303182] rockchip-pvtm fda50000.pvtm: pvtm@1 probed [ 2.303231] rockchip-pvtm fda60000.pvtm: pvtm@2 probed [ 2.303277] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed [ 2.303320] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed [ 2.303806] rockchip-system-monitor rockchip-system-monitor: system monitor probe [ 2.304490] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 2.304934] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 84, base_baud = 1500000) is a 16550A [ 2.305940] random: fast init done [ 2.305989] random: crng init done [ 2.306741] rockchip-vop2 fdd90000.vop: Adding to iommu group 14 [ 2.313133] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2 [ 2.313144] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3 [ 2.313158] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8 [ 2.313166] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9 [ 2.313172] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2 [ 2.313177] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2 [ 2.313248] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Cluster0-win0 as cursor plane for vp0 [ 2.313316] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Cluster1-win0 as cursor plane for vp1 [ 2.313386] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Cluster2-win0 as cursor plane for vp2 [ 2.313447] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Cluster3-win0 as cursor plane for vp3 [ 2.313462] [drm] failed to init overlay plane Cluster0-win1 [ 2.313466] [drm] failed to init overlay plane Cluster1-win1 [ 2.313470] [drm] failed to init overlay plane Cluster2-win1 [ 2.313473] [drm] failed to init overlay plane Cluster3-win1 [ 2.321642] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010f89790) [ 2.322449] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver [ 2.322621] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010f91628) [ 2.323393] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver [ 2.323544] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc010f91628) [ 2.323603] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc010f93c60) [ 2.324168] rockchip-drm display-subsystem: failed to parse loader memory [ 2.436487] dwhdmi-rockchip fdea0000.hdmi: use tmds mode [ 2.436523] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:1000) for vp1 dclk: 148500000 [ 2.436668] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out1 div: 0 dclk_core1 div: 2 [ 2.436677] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop1 to 148500000, get 148500000 [ 2.436704] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000 [ 2.436976] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy pll locked! [ 2.436979] dwhdmi-rockchip fdea0000.hdmi: final tmdsclk = 148500000 [ 2.436987] dwhdmi-rockchip fdea0000.hdmi: dw_hdmi_qp_setup DVI mode [ 2.453437] dwhdmi-rockchip fdea0000.hdmi: use tmds mode [ 2.482181] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 [ 2.492177] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0 [ 2.507733] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 [ 2.517734] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0 [ 2.523245] dwhdmi-rockchip fdea0000.hdmi: use tmds mode [ 2.534399] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 [ 2.536739] dwhdmi-rockchip fdea0000.hdmi: use tmds mode [ 2.544400] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0 [ 2.560974] Console: switching to colour frame buffer device 240x67 [ 2.560997] dwhdmi-rockchip fdea0000.hdmi: use tmds mode [ 2.561066] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 [ 2.571066] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0 [ 2.577687] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device [ 2.578113] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0 [ 2.578313] rockchip_sip_config_dram_init error:fffffffffffffffe [ 2.584040] brd: module loaded [ 2.586665] loop: module loaded [ 2.586816] zram: Added device: zram0 [ 2.586937] lkdtm: No crash points registered, enable through debugfs [ 2.587089] system_heap: orders[0] = 6 [ 2.587093] system_heap: orders[1] = 4 [ 2.587096] system_heap: orders[2] = 0 [ 2.587277] rockchip_sip_config_dram_init error:fffffffffffffffe [ 2.587737] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 [ 2.589034] rockchip-spi feb20000.spi: no high_speed pinctrl state [ 2.590375] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1 [ 2.590507] rk806 spi2.0: ON: 0x40 OFF:0x0 [ 2.592870] vdd_gpu_s0: supplied by vcc5v0_sys [ 2.593910] vdd_cpu_lit_s0: supplied by vcc5v0_sys [ 2.594486] vdd_log_s0: supplied by vcc5v0_sys [ 2.595087] vdd_vdenc_s0: supplied by vcc5v0_sys [ 2.595737] vdd_ddr_s0: supplied by vcc5v0_sys [ 2.596151] vdd2_ddr_s3: supplied by vcc5v0_sys [ 2.596674] vdd_2v0_pldo_s3: Bringing 2025000uV into 2000000-2000000uV [ 2.596897] vdd_2v0_pldo_s3: supplied by vcc5v0_sys [ 2.597371] vcc_3v3_s3: Bringing 3325000uV into 3300000-3300000uV [ 2.597591] vcc_3v3_s3: supplied by vcc5v0_sys [ 2.597733] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0 [ 2.598078] vddq_ddr_s0: supplied by vcc5v0_sys [ 2.598551] vcc_1v8_s3: Bringing 1825000uV into 1800000-1800000uV [ 2.598750] vcc_1v8_s3: supplied by vcc5v0_sys [ 2.599315] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3 [ 2.599885] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3 [ 2.600376] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3 [ 2.600865] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3 [ 2.601367] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3 [ 2.601947] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3 [ 2.602557] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3 [ 2.603110] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3 [ 2.603659] vcc_3v3_s0: supplied by vcc5v0_sys [ 2.604153] vccio_sd_s0: supplied by vcc5v0_sys [ 2.604668] pldo6_s3: supplied by vcc5v0_sys [ 2.605133] rk806 spi2.0: no sleep-setting state [ 2.605139] rk806 spi2.0: no reset-setting pinctrl state [ 2.605143] rk806 spi2.0: no dvs-setting pinctrl state [ 2.607508] spi-nor spi5.0: mx25u12835f (16384 Kbytes) read_data x4 [ 2.607524] 1 fixed-partitions partitions found on MTD device sfc_nor [ 2.607528] Creating 1 MTD partitions on "sfc_nor": [ 2.607532] 0x000000000000-0x000001000000 : "loader" [ 2.609152] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). [ 2.609244] usbcore: registered new interface driver rndis_wlan [ 2.609260] usbcore: registered new interface driver asix [ 2.609277] usbcore: registered new interface driver cdc_ether [ 2.609289] usbcore: registered new interface driver rndis_host [ 2.609309] usbcore: registered new interface driver cdc_ncm [ 2.622575] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.622590] ehci-pci: EHCI PCI platform driver [ 2.622619] ehci-platform: EHCI generic platform driver [ 2.624788] ehci-platform fc800000.usb: EHCI Host Controller [ 2.624803] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1 [ 2.624859] ehci-platform fc800000.usb: irq 20, io mem 0xfc800000 [ 2.637740] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00 [ 2.637822] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.637828] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.637832] usb usb1: Product: EHCI Host Controller [ 2.637837] usb usb1: Manufacturer: Linux 5.10.110-rockchip-standard ehci_hcd [ 2.637841] usb usb1: SerialNumber: fc800000.usb [ 2.638027] hub 1-0:1.0: USB hub found [ 2.638042] hub 1-0:1.0: 1 port detected [ 2.640377] ehci-platform fc880000.usb: EHCI Host Controller [ 2.640392] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2 [ 2.640442] ehci-platform fc880000.usb: irq 22, io mem 0xfc880000 [ 2.651073] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00 [ 2.651151] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.651157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.651161] usb usb2: Product: EHCI Host Controller [ 2.651166] usb usb2: Manufacturer: Linux 5.10.110-rockchip-standard ehci_hcd [ 2.651170] usb usb2: SerialNumber: fc880000.usb [ 2.651330] hub 2-0:1.0: USB hub found [ 2.651344] hub 2-0:1.0: 1 port detected [ 2.651660] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.651671] ohci-platform: OHCI generic platform driver [ 2.651806] ohci-platform fc840000.usb: Generic Platform OHCI controller [ 2.651815] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3 [ 2.651857] ohci-platform fc840000.usb: irq 21, io mem 0xfc840000 [ 2.711810] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.711818] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.711823] usb usb3: Product: Generic Platform OHCI controller [ 2.711827] usb usb3: Manufacturer: Linux 5.10.110-rockchip-standard ohci_hcd [ 2.711831] usb usb3: SerialNumber: fc840000.usb [ 2.711999] hub 3-0:1.0: USB hub found [ 2.712013] hub 3-0:1.0: 1 port detected [ 2.712272] ohci-platform fc8c0000.usb: Generic Platform OHCI controller [ 2.712282] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4 [ 2.712322] ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000 [ 2.771812] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.771821] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.771825] usb usb4: Product: Generic Platform OHCI controller [ 2.771829] usb usb4: Manufacturer: Linux 5.10.110-rockchip-standard ohci_hcd [ 2.771834] usb usb4: SerialNumber: fc8c0000.usb [ 2.771993] hub 4-0:1.0: USB hub found [ 2.772007] hub 4-0:1.0: 1 port detected [ 2.772475] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller [ 2.772486] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 5 [ 2.772556] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000080002010010 [ 2.772578] xhci-hcd xhci-hcd.10.auto: irq 127, io mem 0xfcd00000 [ 2.772693] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.772698] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.772703] usb usb5: Product: xHCI Host Controller [ 2.772707] usb usb5: Manufacturer: Linux 5.10.110-rockchip-standard xhci-hcd [ 2.772711] usb usb5: SerialNumber: xhci-hcd.10.auto [ 2.772868] hub 5-0:1.0: USB hub found [ 2.772883] hub 5-0:1.0: 1 port detected [ 2.773002] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller [ 2.773009] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 6 [ 2.773016] xhci-hcd xhci-hcd.10.auto: Host supports USB 3.0 SuperSpeed [ 2.773041] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.773081] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 2.773086] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.773090] usb usb6: Product: xHCI Host Controller [ 2.773094] usb usb6: Manufacturer: Linux 5.10.110-rockchip-standard xhci-hcd [ 2.773099] usb usb6: SerialNumber: xhci-hcd.10.auto [ 2.773248] hub 6-0:1.0: USB hub found [ 2.773261] hub 6-0:1.0: 1 port detected [ 2.773443] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode [ 2.773449] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller [ 2.773458] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 7 [ 2.773538] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000080002010010 [ 2.773558] xhci-hcd xhci-hcd.11.auto: irq 128, io mem 0xfc400000 [ 2.773674] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.773679] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.773683] usb usb7: Product: xHCI Host Controller [ 2.773687] usb usb7: Manufacturer: Linux 5.10.110-rockchip-standard xhci-hcd [ 2.773692] usb usb7: SerialNumber: xhci-hcd.11.auto [ 2.773846] hub 7-0:1.0: USB hub found [ 2.773860] hub 7-0:1.0: 1 port detected [ 2.773970] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller [ 2.773977] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 8 [ 2.773984] xhci-hcd xhci-hcd.11.auto: Host supports USB 3.0 SuperSpeed [ 2.774011] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.774051] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 2.774056] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.774061] usb usb8: Product: xHCI Host Controller [ 2.774065] usb usb8: Manufacturer: Linux 5.10.110-rockchip-standard xhci-hcd [ 2.774069] usb usb8: SerialNumber: xhci-hcd.11.auto [ 2.774216] hub 8-0:1.0: USB hub found [ 2.774229] hub 8-0:1.0: 1 port detected [ 2.774406] usbcore: registered new interface driver cdc_acm [ 2.774411] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.774503] usbcore: registered new interface driver uas [ 2.774560] usbcore: registered new interface driver usb-storage [ 2.774986] usbcore: registered new interface driver usbtouchscreen [ 2.775911] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.8.auto/input/input0 [ 2.776126] i2c /dev entries driver [ 2.779646] vdd_cpu_big0_s0: supplied by vcc5v0_sys [ 2.788164] vdd_cpu_big1_s0: supplied by vcc5v0_sys [ 2.797098] vdd_npu_s0: supplied by vcc5v0_sys [ 2.814778] rtc-hym8563 6-0051: rtc information is valid [ 2.816251] rtc-hym8563 6-0051: registered as rtc0 [ 2.816531] rtc-hym8563 6-0051: setting system clock to 2021-01-01T12:10:55 UTC (1609503055) [ 2.820452] rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA [ 2.820481] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x400, Bound_cpu:4, wdt_cfg_bound_cpu:5 [ 2.820969] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 0 [ 2.831870] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_controller_init wait timer base lock failed! [ 2.832140] rk_hdmirx fdee0000.hdmirx-controller: rk_hdmirx_hdcp_register success [ 2.832162] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok! [ 2.832255] usbcore: registered new interface driver uvcvideo [ 2.832259] USB Video Class driver (1.1.1) [ 2.833233] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property [ 2.833696] rockchip-thermal fec00000.tsadc: tsadc is probed successfully! [ 2.834487] cpu cpu0: bin=0 [ 2.834662] cpu cpu0: leakage=14 [ 2.836102] cpu cpu0: pvtm=3 [ 2.836184] cpu cpu0: pvtm-volt-sel=0 [ 2.838120] cpu cpu4: bin=0 [ 2.838293] cpu cpu4: leakage=12 [ 2.844786] cpu cpu4: pvtm=1785 [ 2.848736] cpu cpu4: pvtm-volt-sel=7 [ 2.851421] cpu cpu6: bin=0 [ 2.851593] cpu cpu6: leakage=13 [ 2.858099] cpu cpu6: pvtm=1793 [ 2.862058] cpu cpu6: pvtm-volt-sel=7 [ 2.863577] cpu cpu0: avs=0 [ 2.864166] cpu cpu4: avs=0 [ 2.864753] cpu cpu6: avs=0 [ 2.864955] cpu cpu0: EM: created perf domain [ 2.864987] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0 [ 2.865493] cpu cpu4: EM: created perf domain [ 2.865520] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0 [ 2.873748] cpu cpu6: EM: created perf domain [ 2.874103] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0 [ 2.887828] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 2.894173] sdhci: Secure Digital Host Controller Interface driver [ 2.894191] sdhci: Copyright(c) Pierre Ossman [ 2.894197] Synopsys Designware Multimedia Card Interface Driver [ 2.894759] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.895774] dwmmc_rockchip fe2d0000.mmc: IDMAC supports 32-bit address mode. [ 2.895808] dwmmc_rockchip fe2d0000.mmc: Using internal DMA controller. [ 2.895825] dwmmc_rockchip fe2d0000.mmc: Version ID is 270a [ 2.895880] dwmmc_rockchip fe2d0000.mmc: DW MMC controller at irq 73,32 bit host data width,256 deep fifo [ 2.896107] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode. [ 2.896158] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller. [ 2.896177] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a [ 2.896235] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 72,32 bit host data width,256 deep fifo [ 2.897432] ledtrig-cpu: registered to indicate activity on CPUs [ 2.897482] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. [ 2.897540] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 2.899028] dwmmc_rockchip fe2d0000.mmc: allocated mmc-pwrseq [ 2.899059] mmc_host mmc2: card is non-removable. [ 2.899544] cryptodev: driver 1.12 loaded. [ 2.899618] hid: raw HID events driver (C) Jiri Kosina [ 2.900120] usbcore: registered new interface driver usbhid [ 2.900132] usbhid: USB HID core driver [ 2.904381] optee: probing for conduit method. [ 2.904415] optee: revision 3.13 (48b7c13e) [ 2.904736] optee: initialized driver [ 2.904925] rksfc_base v1.1 2016-01-08 [ 2.905303] usbcore: registered new interface driver snd-usb-audio [ 2.911197] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 2.913179] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1 [ 2.914536] input: rockchip-hdmi1 rockchip-hdmi1 as /devices/platform/hdmi1-sound/sound/card1/input2 [ 2.914791] debugfs: File 'Capture' in directory 'dapm' already present! [ 2.915436] input: rockchip,dp0 rockchip,dp0 as /devices/platform/dp0-sound/sound/card2/input3 [ 2.916056] Initializing XFRM netlink socket [ 2.916072] NET: Registered protocol family 17 [ 2.916363] [BT_RFKILL]: Enter rfkill_rk_init [ 2.916367] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 2.916539] [WLAN_RFKILL]: Enter rfkill_wlan_probe [ 2.916559] [WLAN_RFKILL]: can't find rockchip,grf property [ 2.916564] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6256 [ 2.916567] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. [ 2.916571] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. [ 2.916594] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 10, flags = 0. [ 2.916600] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found ! [ 2.916604] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio [ 2.916608] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1 [ 2.916612] [WLAN_RFKILL]: Exit rfkill_wlan_probe [ 2.916866] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 34. [ 2.916880] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 102. [ 2.916890] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 21. [ 2.916944] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 2.917010] [BT_RFKILL]: Request irq for bt wakeup host [ 2.917072] [BT_RFKILL]: ** disable irq [ 2.917148] [BT_RFKILL]: bt_default device registered. [ 2.917199] Key type dns_resolver registered [ 2.917459] flash vendor_init_thread! [ 2.917463] flash vendor storage:20170308 ret = -1 [ 2.917817] registered taskstats version 1 [ 2.917823] Loading compiled-in X.509 certificates [ 2.917917] pstore: Using crash dump compression: deflate [ 2.918019] rga3_core0 fdb60000.rga: Adding to iommu group 2 [ 2.918128] rga: rga3_core0_irq, irq = 33, match scheduler [ 2.918380] rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831. [ 2.918401] rga: rga3_core0 probe successfully [ 2.918520] rga3_core1 fdb70000.rga: Adding to iommu group 3 [ 2.918613] rga: rga3_core1_irq, irq = 34, match scheduler [ 2.918854] rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831. [ 2.918877] rga: rga3_core1 probe successfully [ 2.919003] rga: rga2_irq, irq = 35, match scheduler [ 2.919236] rga: rga2 hardware loaded successfully, hw_version:3.2.63318. [ 2.919241] rga: rga2 probe successfully [ 2.919318] rga2_mmu: IOMMU binding successfully, default mapping core[0x1] [ 2.919367] rga: Module initialized. v1.2.20 [ 2.919370] [ 2.919372] ******************************************************************** [ 2.919374] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 2.919376] ** ** [ 2.919379] ** WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL ** [ 2.919381] ** ** [ 2.919383] ** This means that this kernel is built to expose clk operations ** [ 2.919385] ** such as parent or rate setting, enabling, disabling, etc. ** [ 2.919387] ** to userspace, which may compromise security on your system. ** [ 2.919390] ** ** [ 2.919392] ** If you see this message and you are not debugging the ** [ 2.919394] ** kernel, report this immediately to your vendor! ** [ 2.919395] ** ** [ 2.919398] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 2.919400] ******************************************************************** [ 2.929045] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA [ 2.933559] vcc3v3_pcie2x1l2: supplied by vcc_3v3_s3 [ 2.933712] mali fb000000.gpu: Kernel DDK version g13p0-01eac0 [ 2.936256] mali fb000000.gpu: leakage=20 [ 2.936278] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present! [ 2.937129] rockchip-dmc dmc: leakage=50 [ 2.937135] rockchip-dmc dmc: leakage-volt-sel=2 [ 2.937271] rockchip-dmc dmc: avs=0 [ 2.937277] rockchip-dmc dmc: current ATF version 0x100 [ 2.937326] rockchip-dmc dmc: normal_rate = 1560000000 [ 2.937329] rockchip-dmc dmc: reboot_rate = 2112000000 [ 2.937332] rockchip-dmc dmc: suspend_rate = 528000000 [ 2.937334] rockchip-dmc dmc: video_4k_rate = 1560000000 [ 2.937337] rockchip-dmc dmc: video_4k_10b_rate = 1560000000 [ 2.937340] rockchip-dmc dmc: video_svep_rate = 1560000000 [ 2.937342] rockchip-dmc dmc: boost_rate = 2112000000 [ 2.937345] rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000 [ 2.937348] rockchip-dmc dmc: performance_rate = 2112000000 [ 2.937350] rockchip-dmc dmc: hdmirx_rate = 2112000000 [ 2.937355] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate [ 2.937357] rockchip-dmc dmc: failed to get vop pn to msch rl [ 2.937409] rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0 [ 2.937733] mali fb000000.gpu: pvtm=841 [ 2.939350] mali fb000000.gpu: pvtm-volt-sel=2 [ 2.939595] mali fb000000.gpu: avs=0 [ 2.940393] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available. [ 2.940681] rockchip-dmc dmc: could not find power_model node [ 2.940901] mali fb000000.gpu: GPU hardware issue table may need updating: [ 2.940901] r0p0 status 5 is unknown; treating as r0p0 status 0 [ 2.940906] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0 [ 2.940931] mali fb000000.gpu: No priority control manager is configured [ 2.940935] mali fb000000.gpu: No memory group manager is configured [ 2.940945] mali fb000000.gpu: Protected memory allocator not available [ 2.941165] mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT [ 2.941627] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model' [ 2.941632] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0] [ 2.941748] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0] [ 2.941838] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0] [ 2.941910] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = '' [ 2.942935] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model [ 2.943005] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0 [ 2.945576] mali fb000000.gpu: Probed as mali0 [ 2.951087] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) [ 2.966577] mmc0: mmc_select_hs400 failed, error -84 [ 2.966601] mmc0: error -84 whilst initialising MMC card [ 2.997219] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
Try: reduce emmc clock frequency?
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 1e30c7262464d..3207b606bb6fc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -488,7 +488,7 @@ &sdhci {
no-sdio;
no-sd;
non-removable;
- max-frequency = <200000000>;
+ max-frequency = <150000000>;
mmc-hs400-1_8v;
//mmc-hs400-enhanced-strobe;
status = "okay";I tried the new kernel version and reducing emmc speed but the error persists. I had one boot that went through. But since then only green HDMI screen and hung/crashed kernel.
very strange behaviour. I tried core-image-sato and got the same result: Kernel hung, screen turned green.
RadxaStephen
commented
1 year ago I uploaded my tested image, can you try it to see if it runs normally?
https://mega.nz/file/JBtm2LQD#asFWNOSs5_XBwtBBvlIsWsbxtvKx_C7YCZenU0rh00c
DasBasti
commented
1 year ago Thanks Stephen, I tried your Image on emmc and it also crashes. I tried another Rock5B board and that does not even boot. I tried flashing to SD card and on the board that does not boot from emmc it boots and crashes right after showing the matchbox screen. Is it plausible, that I have two defective hardware? I use rock-5b-spi-image-g3caf61a44c2-debug as SPI bootloader and used RKDevTool 2.96 to flash it.
DasBasti
commented
1 year ago Ok, so I did the following:
So sometimes I get a working system, sometimes I get a green screen. I have no Idea what I changed to get the different behaviour.
RadxaStephen
commented
1 year ago Please try it with eMMC. Bootimg from SD is not supported so far.
And we don't need to write the image to SPI Nor Flash. Can you erase SPI Nor Flash and test again?
RadxaStephen
commented
1 year ago Guide for erasing SPI Nor Flash is attached.
RadxaStephen
commented
1 year ago Can you double check your flash steps?
This is our guide. https://wiki.radxa.com/Rock5/install/usb-install-emmc
DasBasti
commented
1 year ago I erased SPINOR and it startet two times without issues, the third time it stuck on the green screen again. I moved the eMMC to the second board that would not start from, eMMC, erased SPINOR and boot is stuck at soft reset. Doing power on resets did work for at least 10 times in a row.
I validated flash steps and also validated the erase of SPINOR.
I did some more rebooting and it seams as if it works most of the time but not every time. some times it still crashes with a green screen.
RadxaStephen
commented
1 year ago To validate spi erase. Remove the eMMC module and power on 5B, 5B would get into maskrom mode.
RadxaStephen
commented
1 year ago Do you have Radxa PD 30W adapter or DC 12V power adapter? If yes, please try it.
DasBasti
commented
1 year ago Without eMMC there is no serial output and MASKROM was enabled, so I would say SPINOR is successfully erased
A tried 12V Power over the USB-C connector. It booted once in 10 tries. It stuck at different times of the boot process. Mostly during init, sometimes before.
RadxaStephen
commented
1 year ago What is your hardware version? Can you take a picture of your hardware connection?
DasBasti
commented
1 year ago
USB-C cable can be connected to hub with charging port or 12V DC
HDMI goes to Dell 1920x1200 Monitor
Dongle is wireless Keyboard/Mouse
UART is FTDI 3,3V level
RadxaStephen
commented
1 year ago This is what I did
rkdeveloptool db loader.bin
rkdeveloptool wl 0 core-image-sato-rockchip-rk3588-rock-5b.wic
rkdeveloptool rdOk, so basically the same setup. I ordered a new board and eMMC. Might be that one of those things is broken. Thanks for your help.
RadxaStephen
commented
1 year ago I have also provided yocto manifest repo to build ROCK 5B image with chromium. Maybe you can try it also.
https://github.com/radxa/yocto-manifests/blob/chromium-kirkstone-next-radxa/README.md
I built the system using the rockchip-rk3588-rock-5b configuration. I added #1 and flashed the image to eMMC using RKDevTool. When attaching a HDMI cable the kernel starts and stops responding after a few seconds (log below). Without HDMI connection the system starts and runs. Pluging in HDMI after system startup, the monitor stays black.
Console log of booting Kernel
``` DDR Version V1.08 20220617 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:28.7%, TX Vref:20.8%,0.0% CH1 RX Vref:29.7%, TX Vref:21.8%,0.0% CH2 RX Vref:28.7%, TX Vref:22.8%,0.0% CH3 RX Vref:28.7%, TX Vref:21.8%,0.0% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL board init U-Boot SPL 2017.09-g3caf61a44c2-220414 #stephen (Sep 29 2022 - 18:14:19) Trying to boot from MMC2 MMC: no card present mmc_init: -123, time 0 spl: mmc init failed with error: -123 Trying to boot from MMC1 Trying fit image at 0x4000 sector ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(bdf7cdc2aa...) + OK ## Checking uboot 0x00200000 ... sha256(67cbc63a35...) + OK ## Checking fdt 0x00308f08 ... sha256(a5e6b35d32...) + OK ## Checking atf-2 0x000f0000 ... sha256(4be22b88b0...) + OK ## Checking atf-3 0xff100000 ... sha256(c6fa3a1ea0...) + OK ## Checking atf-4 0xff009000 ... sha256(d55aac40fb...) + OK ## Checking optee 0x08400000 ... sha256(a6641b3301...) + OK Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) Total: 516.610 ms INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-248-ga91da4072:derrick.huang NOTICE: BL31: Built : 14:38:57, Jan 7 2022 INFO: timer_hp_init no valid 32k timer source, use normal mode INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 WARNING: pmu_power_domain_ctr: 21, 0, error! WARNING: pmu_bus_idle_req: can't wait state 0 for bus 21 (0x23ffff) INFO: idle_st=0x221fff, pd_st=0x31fff9 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 I/TC: I/TC: OP-TEE version: 3.13.0-619-g48b7c13e2-dev #troy.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #77 Thu Jan 6 17:12:24 CST 2022 aarch64 I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09 (Jan 10 2022 - 01:38:43 +0000) Model: Rockchip RK3588 Evaluation Board PreSerial: 2, raw, 0xfeb50000 DRAM: 7.7 GiB Sysmem: init Relocation Offset: edb6e000 Relocation fdt: eb9fabf0 - eb9fece8 CR: M/C/I Using default environment mmc@fe2c0000: 1, mmc@fe2e0000: 0 Bootdev(atags): mmc 0 MMC0: HS400, 200Mhz PartType: EFI DM: v2 No misc partition boot mode: None FIT: No fdt blob Found DTB in boot part DTB: rk-kernel.dtb HASH(c): OK I2c0 speed: 100000Hz vsel-gpios- not found! Error: -2 en-gpios- not found! Error: -2 vdd_cpu_big0_s0 800000 uV vsel-gpios- not found! Error: -2 en-gpios- not found! Error: -2 vdd_cpu_big1_s0 800000 uV I2c1 speed: 100000Hz vsel-gpios- not found! Error: -2 en-gpios- not found! Error: -2 vdd_npu_s0 800000 uV spi2: RK806: 2 vdd_gpu_s0 675000 uV vdd_cpu_lit_s0 762500 uV vdd_log_s0 725000 uV vdd_vdenc_s0 init 750000 uV vdd_ddr_s0 837500 uV Warn: can't find connect driver Warn: can't find connect driver Warn: can't find connect driver Warn: can't find connect driver Warn: can't find connect driver Warn: can't find connect driver Model: Radxa ROCK 5B CLK: (uboot. arm: enter 1200000 KHz, init 1200000 KHz, kernel 0N/A) b0pll 1200000 KHz b1pll 1200000 KHz lpll 1200000 KHz v0pll 24000 KHz aupll 786215 KHz cpll 1500000 KHz gpll 1188000 KHz npll 850000 KHz ppll 1100000 KHz aclk_center_root 702000 KHz pclk_center_root 200000 KHz hclk_center_root 396000 KHz aclk_center_low_root 500000 KHz aclk_top_root 750000 KHz pclk_top_root 100000 KHz aclk_low_top_root 396000 KHz No misc partition Net: No ethernet found. Hit key to stop autoboot('CTRL+C'): 0 Could not find misc partition ANDROID: reboot reason: "(none)" optee api revision: 2.0 TEEC: Waring: Could not find security partition Not AVB images, AVB skip ANDROID: Hash OK Booting IMAGE kernel at 0x00400000 with fdt at 0x0a100000... Fdt Ramdisk skip relocation No misc partition ## Booting Android Image at 0x003ff800 ... Kernel: 0x00400000 - 0x0219a200 (30313 KiB) ## Flattened Device Tree blob at 0x0a100000 Booting using the fdt blob at 0x0a100000 XIP Kernel Image from 0x00400000 to 0x00400000 ... OK kernel loaded at 0x00400000, end = 0x0219a200 'reserved-memory' cma: addr=10000000 size=10000000 'reserved-memory' ramoops@110000: addr=110000 size=f0000 Using Device Tree in place at 000000000a100000, end 000000000a1419d7 Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000) Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000) Total: 842.290 ms Starting kernel ... [ 0.965836] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.965862] Linux version 5.10.110-rockchip-standard (oe-user@oe-host) (aarch64-poky-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP Fri Jan 6 12:17:55 UTC 2023 [ 0.980697] Machine model: Radxa ROCK 5B [ 0.980781] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '') [ 0.983800] printk: bootconsole [uart8250] enabled [ 0.987259] efi: UEFI not found. [ 0.995004] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB [ 0.996078] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB [ 0.997259] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB [ 0.998002] OF: reserved mem: initialized node cma, compatible id shared-dma-pool [ 1.150810] Zone ranges: [ 1.151061] DMA [mem 0x0000000000200000-0x00000000ffffffff] [ 1.151636] DMA32 empty [ 1.151905] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 1.152475] Movable zone start for each node [ 1.152868] Early memory node ranges [ 1.153199] node 0: [mem 0x0000000000200000-0x00000000083fffff] [ 1.153776] node 0: [mem 0x0000000009400000-0x00000000efffffff] [ 1.154353] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 1.154932] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff] [ 1.198680] psci: probing for conduit method from DT. [ 1.199154] psci: PSCIv1.1 detected in firmware. [ 1.199580] psci: Using standard PSCI v0.2 function IDs [ 1.200064] psci: Trusted OS migration not required [ 1.200515] psci: SMC Calling Convention v1.2 [ 1.201348] percpu: Embedded 32 pages/cpu s93032 r8192 d29848 u131072 [ 1.202168] Detected VIPT I-cache on CPU0 [ 1.202583] CPU features: detected: GIC system register CPU interface [ 1.203176] CPU features: detected: Virtualization Host Extensions [ 1.203750] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 1.204398] alternatives: patching kernel code [ 1.205206] Built 1 zonelists, mobility grouping on. Total pages: 1995336 [ 1.205843] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.verifiedbootstate=orange androidboot.serialno=d56bbca17c059fe8 rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000 [ 1.209555] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 1.210746] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 1.211469] mem auto-init: stack:off, heap alloc:off, heap free:off [ 1.219384] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB) [ 1.296783] Memory: 7591464K/8108032K available (14784K kernel code, 3240K rwdata, 5836K rodata, 6336K init, 542K bss, 254424K reserved, 262144K cma-reserved) [ 1.298240] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 1.298876] ftrace: allocating 57327 entries in 224 pages [ 1.401812] ftrace: allocated 224 pages with 3 groups [ 1.402604] rcu: Hierarchical RCU implementation. [ 1.403043] rcu: RCU event tracing is enabled. [ 1.403462] Rude variant of Tasks RCU enabled. [ 1.403878] Tracing variant of Tasks RCU enabled. [ 1.404321] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 1.410225] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 1.413739] GICv3: GIC: Using split EOI/Deactivate mode [ 1.414226] GICv3: 480 SPIs implemented [ 1.414581] GICv3: 0 Extended SPIs implemented [ 1.415019] GICv3: Distributor has no Range Selector support [ 1.415547] GICv3: 16 PPIs implemented [ 1.415938] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000 ```