search

rafaelmaeuer / Asus-P8P67Pro-Hackintosh

Install macOS Monterey on Asus P8P67 Pro/Evo Mainboard (+ Dual-Boot Win 11)
46 stars 14 forks source link

Kernel cache crash #5

Closed graysham closed 5 years ago

graysham commented 5 years ago

Have seen this mentioned in the troubleshooting section of the readme but with no further info. I have followed the guide letter for letter, but install crashes on boot with this eroor or occasionally seed related error. Have tried various versions of Aptio fix with no joy, have also tried unibeaat Uefi or legacy boot version as well all have crashed out the same way. Any further info anyone can offer..

rafaelmaeuer commented 5 years ago

Hey @graysham, I also face this error from time to time, I lately switched from OsxAptioFixDrv to OsxAptioFix2Drv I had the impression the error occurs less frequently then. To pass this error I need to restart multiple times - so my advice is to keep trying restart until it passes with showing a uuid. Also try restarts with power off. I don't know what causes the kernel cache to crash, I noticed little system changes like hardware or Bios-settings can cause this error, but it also occurs from cold-boot too.

graysham commented 5 years ago

Hi thanks for the response, does this continue to be an issue after install or is it just leading up to install?

graysham commented 5 years ago

sorry didn’t mean to close the issue!

rafaelmaeuer commented 5 years ago

This continue to be an issue after install too, but it doesn't occur often and if it most passes after the first or second restart. But finding a permanent solution would be nice! With OsxAptioFixDrv more restarts were required if I remember correctly. But I guess you tried all OsxAptioFixDrv versions? What is your clover version?

graysham commented 5 years ago

Clover I have tried the newest one and whatever version is currently bundled with unibeast. I have tried every version of aptiofix I can find and have either hit kernel Cache error or seed related error thus far with no successful boots into install. Have removed ram apart from two in slots 1 and 3. Removed all drives except target and made sure it’s only in the gray sata slot.

rafaelmaeuer commented 5 years ago

Do you have exactly the same mainboard? Which version is your Bios? I will update working bios settings soon, maybe you can check out yours?

graysham commented 5 years ago

I have the normal p8p67 as opposed to the pro, bios version 3602, however have seen people who have successfully set up with this motherboard following your guide. Bios settings I have looked at yours and other guides; disabling Bluetooth, usb 3.0

graysham commented 5 years ago

Have just tried 10 reboots in a row, stuck at load prelinked kernel with status 0x800000000009 Error loading kernel cache (0x9)

That’s with Aptiofix2

graysham commented 5 years ago

Using aptiofix3 I get past kernelcache 90% of the time and hit randomseed error, any tips on that one? I have tried mapping my ram through smbios, does not seemed to have helped.

rafaelmaeuer commented 5 years ago

Do you use the config.plist from the repo? What SMBios do you use? iMac17,1 Intel Core i7 6700K @ 4GHz is working good for me.

graysham commented 5 years ago

I have yes used the config.plist, also using 17.1 smbios, May have to look at swapping for another motherboard