Open dandancheeseandham opened 5 years ago
Should likely just upload the printable ones I've been using and add them to the parts list.
On Tue, Jun 4, 2019 at 4:05 PM Dan White notifications@github.com wrote:
As title. Self-sourcers can get stuck on that bit if they don't have standoffs "in stock"
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/railcore/parts/issues/13?email_source=notifications&email_token=ABYQQ4YUOEVQ327M6KHQZU3PY3DJLA5CNFSM4HTA73WKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4GXTYN6A, or mute the thread https://github.com/notifications/unsubscribe-auth/ABYQQ45VMAZUANBS2UXYDMTPY3DJLANCNFSM4HTA73WA .
I made some brackets with heat-set inserts on both sides so that you can screw the brackets through the side panel and then screw the duet/duex into the bracket. Makes assembly a lot easier than spacers and nuts - might be something we should entertain "upstream" as well?
I've considered modeling a duet + duex5 "holder" that has integrated wire minders, so it tidies it all up nicely. But it's been "on the list" for over a year now.
On Tue, Jun 4, 2019 at 4:27 PM Joe Francis notifications@github.com wrote:
I made some brackets with heat-set inserts on both sides so that you can screw the brackets through the side panel and then screw the duet/duex into the bracket. Makes assembly a lot easier than spacers and nuts - might be something we should entertain "upstream" as well?
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/railcore/parts/issues/13?email_source=notifications&email_token=ABYQQ47CT2ADQQES2O3RN7LPY3F4ZA5CNFSM4HTA73WKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODW5YZJQ#issuecomment-498830502, or mute the thread https://github.com/notifications/unsubscribe-auth/ABYQQ4Y3XUNMQD4FQ7VMGFTPY3F4ZANCNFSM4HTA73WA .
@kraegar printable ones will be a reasonable step to start with. Do you have a link to the ones you used to save me digging through Thingiverse? They can then be added to the parts repo and to the docs
Added to thingiverse and the BOM parts list
On Wed, Jun 5, 2019 at 4:16 AM Dan White notifications@github.com wrote:
@kraegar https://github.com/kraegar printable ones will be a reasonable step to start with. Do you have a link to the ones you used to save me digging through Thingiverse? They can then be added to the parts repo and to the docs
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/railcore/parts/issues/13?email_source=notifications&email_token=ABYQQ45QDYNVBMSUJQVWDIDPY5Y6TA5CNFSM4HTA73WKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODW66SMI#issuecomment-498985265, or mute the thread https://github.com/notifications/unsubscribe-auth/ABYQQ45JKEVAKWUDTZ53NNLPY5Y6TANCNFSM4HTA73WA .
Nice one. I've added that to the parts repo too.
As title. Self-sourcers can get stuck on that bit if they don't have standoffs "in stock"