search

ralfvd / com.everspring

Everspring support Homey
GNU General Public License v3.0
4 stars 13 forks source link

ST812 added but not functioning #42

Open wouters opened 4 years ago

wouters commented 4 years ago

He guys. i've added two ST812 flood sensors. (both sensors work correct with home assistant). Adding works fine and they are recognised, but don't seem to respond to actual floods. also the batteries always show 100% which they aren't so it seems something is wrong. anyone else had this behavious?

thanks!!

wouters commented 4 years ago

He hello,

No one has this problem? Or no one using the ST812?

carlsall commented 3 years ago

Tried to add ST812 to my Homey 5.0. Will only connect as Basic Z-Wave Device. No respond if alarm is triggered.

Device Information: Secure : x Battery : V Device ID: 94 Manufacturer ID: 309 Product Type ID: 11 Product ID : 1 Firmware Version : 1 Firmware Sub Version : 3 Device Class (Basic) : BASIC_TYPE_ROUTING_SLAVE Device Class (Generic) : GENERIC_TYPE_SENSOR_ALARM Device Class (Specific) : SPECIFIC_TYPE_ROUTING_ALARM_SENSOR

ralfvd commented 3 years ago

Hi,

Do you have a picture of the device? It shouldn't have Manufacturer ID '309' , this is not Everspring, but Zyxel . So that's why it is not recognized as the ST812.

carlsall commented 3 years ago

Sure Hope this can be any help

[image: 20210218_111655.jpg][image: 20210218_111632.jpg]

Den tors 18 feb. 2021 11:13ralfvd notifications@github.com skrev:

Hi,

Do you have a picture of the device? It shouldn't have Manufacturer ID '309' , this is not Everspring, but Zyxel . So that's why it is not recognized as the ST812.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ralfvd/com.everspring/issues/42#issuecomment-781235289, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARCHPXG2QUY3HCVS6ONYDQ3S7TR37ANCNFSM4IY2WHTQ .

ralfvd commented 3 years ago

Hi, unfortunately the picture is not visible, this is due to GitHub .

CAn you send the picture to ralfvd AT gmail.com ? Then we can discuss it per email as well. Thanks!

Elliott32224 commented 4 days ago

This thread is old, but I am having this same issue with my Everspring ST812's in HomeSeer with their new Z-Wave Plus. These worked great in the old version of HomeSeer's plugin. Has it been solved by anyone? Thanks.