3D Side-by-Side Support

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Connect a 3D camera that uses side-by-side technology.
2. Configure min. Battery Voltage (V) in the Config Tool.
3. Use FPV glasses that support 3D (SBS) to view the OSD information.

What is the expected output? What do you see instead?
To clearly be able to read the Battery Voltage displayed when using FPV glasses 
in 3D mode.
Information should be nicely overlay similar to when not using 3D.

What version of the product are you using? On what operating system?
I cant find any information that this is even supported today, but maybe it 
could be a future feature.
Don't hate me, but, I have not even tested this.  :|  (but, I will)
But, I'm pretty sure it will not work as the OSD will be placed over both side 
of the 3D picture (left and right), see attacment (side-by-side_osd_normal.jpg.
I mean the correct OSD overlay would be placed as attachment 
side-by-side_osd_duplicated.jpg.

Please provide any additional information below.
Maybe 3D in Field Sequential works today, I don't know, have no equipment to 
test.
Can't find any separate OSD module that seem to support 3D today. 
The only thing I have found is that NerdCam3D has it's own limited OSD included 
in the camera, only providing battery Volt+Amp and Time.

I have started a thread hoping for people to provide some info/ideas.. 
http://fpvlab.com/forums/showthread.php?35585-OSD-with-3D-support

Original issue reported on code.google.com by andersca...@hotmail.com on 30 Nov 2014 at 12:16

Attachments:

• side-by-side_osd_normal.JPG
• side-by-side_osd_duplicated.jpg

[GoogleCodeExporter]

Hello,

This is not a 3D OSD.

If you can connect OSD only to one side, then it is possible that your problem 
can be solved that way. You might need 2 osd modul also.

Gábor

Original comment by gabek...@gmail.com on 30 Nov 2014 at 10:24

• Added labels: Priority-Low, Type-Other
• Removed labels: Priority-Medium, Type-Defect

[GoogleCodeExporter]

I know that minimosd is not a 3D OSD, but maybe it could be?

NerdCam3D (only SBS camera I have found) does not allows user to hook into one 
of the right or left original camera video signals. 
The 3D side-by-side processing is done by the camera electronics itself and 
only the 3D side-by-side video signal is sent out.

Original comment by andersca...@hotmail.com on 30 Nov 2014 at 5:01

[GoogleCodeExporter]

Well then no chence. no real way.

we could display all panels twice, but we would have half of the resolution we 
have now. Also lot of coding we need.

So at this point i would say, not possible.

The best way would be to add a 2D to 3D converter that work on the fly, but 
will have a delay.

Gábor

Original comment by gabek...@gmail.com on 30 Nov 2014 at 9:18

[GoogleCodeExporter]

I use blackbird 3d camera with headplay goggles and it works well with this 
setup.
http://www.rangevideo.com/blackbird-3d-camera/316-3d-fpv-camera-the-blackbird-sh
op-with-rangevideo-fpv-fpv-3dcam-russia-cam-blackbird.html

Original comment by sha...@onmyblock.com on 11 Dec 2014 at 6:56

[GoogleCodeExporter]

The Headplay googles uses 3D frame sequential and not side-by-side, that's the 
reason why it works. My Fatshark Dominators googles only have support for 
side-by-side.

Original comment by andersca...@hotmail.com on 11 Dec 2014 at 8:01

[GoogleCodeExporter]

I am using skyzone 3D FPV camera and goggle. Installed 2 MinimOSD-extra and my 
"3D OSD" is working good.

Skyzone 3D FPV is actually a 2 camera + 2 videoTx setup. So doing the 
soldiering twice, one for left eye and one for right eye, is all I need to do.

Original comment by wilsonthongwk on 1 Jun 2015 at 7:16

[GoogleCodeExporter]

but still the "OSD depth" is difficult to adjust. I need to move the 
left-eye-OSD-panel leftward and move the right-eye-OSD-panel rightward. and the 
process is painful

download left OSD config -> 
download right OSD config -> 
reconnect pixhawk cable -> 
power-on -> check no good -> power-off -> 
reconnect FTDI cable -> 
change left minimOSD config -> 
change right minimOSD config -> 
download left OSD config ->
download right OSD config ->
.... and cycle again and again until I see a good OSD depth in the goggle.

it will be nice if this little "left/right" shift can be done live after 
power-on.

Original comment by wilsonthongwk on 1 Jun 2015 at 7:28