URL's not working correctly

keesse commented 3 months ago

Hi ralsina,

I just build markterm and it works fine, so thanks! However when clicking on the shown URL's in the terminal, I get a 404, this is because there is a ">" added, when I remove this, I get the correct page. E.g. https://github.com/charmbracelet/glow%3E

Regards,

kees

ralsina commented 2 months ago

Thanksfor the report, I'll take a look!

ralsina commented 2 months ago

They seem to be working for me right now, maybe I fixed it at some point :-D

Could you check with the latest code from main? If that works I will make another release.

keesse commented 2 months ago

I did a git pull origin main to update the source directory, but make gave an error, so I tried a new clone after removing the old directory, but with the same result:

markterm on  main is 📦 v0.3.0 via 🔮 v1.13.1 ❯ make shards build -Dstrict_multi_assign -Dno_number_autocast Resolving dependencies Fetching https://github.com/ralsina/tartrazine.git Fetching https://github.com/ralsina/sixteen.git Fetching https://github.com/icyleaf/markd.git Fetching https://github.com/chenkovsky/docopt.cr.git Fetching https://github.com/schovi/baked_file_system.git Fetching https://github.com/crystal-china/base58.cr.git Installing markd (0.5.0) Installing baked_file_system (0.10.0) Installing base58 (0.1.0 at 2b0564a) Installing sixteen (0.3.0) Installing docopt (0.2.0 at 620fce4) Installing tartrazine (0.6.1) Writing shard.lock Building: markterm Error target markterm failed to compile: Showing last frame. Use --error-trace for full trace.

In src/terminal.cr:100:30

100 | formatter.format(source, lexer) ^---- Error: expected argument #2 to 'Tartrazine::Ansi#format' to be Tartrazine::Lexer, not Tartrazine::BaseLexer

Overloads are:

Tartrazine::Ansi#format(text : String, lexer : BaseLexer, outp : IO)
Tartrazine::Ansi#format(text : String, lexer : Lexer)
Tartrazine::Formatter#format(text : String, lexer : Lexer)

make: *** [Makefile:2: build] Error 1

Op ma 26 aug 2024 om 17:34 schreef Roberto Alsina @.***

:

They seem to be working for me right now, maybe I fixed it at some point :-D

Could you check with the latest code from main? If that works I will make another release.

— Reply to this email directly, view it on GitHub https://github.com/ralsina/markterm/issues/1#issuecomment-2310498273, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEKTDLORFUPRKHQMMEZR2DTZTNDHXAVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMJQGQ4TQMRXGM . You are receiving this because you authored the thread.Message ID: @.***>

ralsina commented 2 months ago

Ok, pushed a new release of tartrazine and a new commit in markterm, this combination should work :-)

keesse commented 2 months ago

Unfortunately not

markterm on  main is 📦 v0.3.0 via 🔮 v1.13.2 took 2m31s ❯ git pull origin main remote: Enumerating objects: 5, done. remote: Counting objects: 100% (5/5), done. remote: Compressing objects: 100% (1/1), done. remote: Total 3 (delta 2), reused 3 (delta 2), pack-reused 0 (from 0) Unpacking objects: 100% (3/3), 333 bytes | 333.00 KiB/s, done. From https://github.com/ralsina/markterm

branch main -> FETCH_HEAD f69a123..7d5a142 main -> origin/main Updating f69a123..7d5a142 Fast-forward shard.yml | 1 + 1 file changed, 1 insertion(+)

markterm on  main is 📦 v0.3.0 via 🔮 v1.13.2 ❯ make shards build -Dstrict_multi_assign -Dno_number_autocast Resolving dependencies Fetching https://github.com/icyleaf/markd.git Fetching https://github.com/chenkovsky/docopt.cr.git Fetching https://github.com/ralsina/tartrazine.git Fetching https://github.com/ralsina/sixteen.git Fetching https://github.com/schovi/baked_file_system.git Fetching https://github.com/crystal-china/base58.cr.git Unable to satisfy the following requirements:

sixteen (branch main) required by shard.yml
sixteen (0.3.0) required by shard.lock
sixteen (*) required by tartrazine 0.6.1 Failed to resolve dependencies make: *** [Makefile:2: build] Error 1

ralsina commented 2 months ago

remove your lib/ and shard.lock first

ralsina commented 2 months ago

And sorry about all the complications, but hey, you are AFAIK the second person to try this :-D

keesse commented 2 months ago

Removing the shard.lock did it, I could build. However from the terminal I am using Hyper gave the same problem, I then tried Warp, that worked! Tried the standard Linux Mint Terminal, that gave errors, also Terminator, appearingly they do not support links

markterm on  main is 📦 v0.3.0 via 🔮 v1.13.2 ❯ bin/markterm README.md Unhandled exception: Missing ENV key: "TERM_PROGRAM" (KeyError) from /home/kees/.asdf/installs/crystal/1.13.2/share/crystal/src/env.cr:57:7 in 'fetch' from /home/kees/.asdf/installs/crystal/1.13.2/share/crystal/src/env.cr:22:5 in '[]' from src/terminal.cr:8:8 in 'supports_links?' from src/markterm.cr:183:14 in 'text' from lib/markd/src/markd/renderer.cr:92:13 in 'render' from src/markterm.cr:203:7 in 'render' from src/markterm.cr:212:5 in 'to_term:theme:code_theme' from src/main.cr:21:8 in 'main' from src/main.cr:32:1 in '__crystal_main' from /home/kees/.asdf/installs/crystal/1.13.2/share/crystal/src/crystal/main.cr:118:5 in 'main_user_code' from /home/kees/.asdf/installs/crystal/1.13.2/share/crystal/src/crystal/main.cr:104:7 in 'main' from /home/kees/.asdf/installs/crystal/1.13.2/share/crystal/src/crystal/main.cr:130:3 in 'main' from /lib/x86_64-linux-gnu/libc.so.6 in '??' from /lib/x86_64-linux-gnu/libc.so.6 in '__libc_start_main' from bin/markterm in '_start' from ???

ralsina commented 2 months ago

Ok, the support for html-style links in different terminals is ... spotty?

I tried it in kitty and alacritty, will check on a few of the ones you mentioned.

ralsina commented 2 months ago

I tried hyper. Markterm is not even trying to do links in it!

What hyper does is recognize URL patterns but it reads <https://foo.com> as a link to https://foo.com> which is different from any other terminal.

For terminator (and probably other VTE based terminals) it´s a bug in markterm I can fix tonight

You have been really helpful dude!

ralsina commented 2 months ago

Fixed in master for terminator (and probbaly for mint too)

For hyper I created an issue because it looks like a bug: https://github.com/vercel/hyper/issues/8031

If you find any other weird behaviour just open another issue.

keesse commented 2 months ago

A shard version issue with tartrazine (I did remove shard.lock)

markterm on  main is 📦 v0.3.0 via 🔮 v1.13.2 ❯ git pull origin main
remote: Enumerating objects: 27, done. remote: Counting objects: 100% (27/27), done. remote: Compressing objects: 100% (10/10), done. remote: Total 21 (delta 12), reused 20 (delta 11), pack-reused 0 (from 0) Unpacking objects: 100% (21/21), 3.56 KiB | 145.00 KiB/s, done. From https://github.com/ralsina/markterm

branch main -> FETCH_HEAD 7d5a142..c4617e3 main -> origin/main Updating 7d5a142..c4617e3 Fast-forward .pre-commit-config.yaml | 35 +++++++++++++++++++++++++++++++++++ CHANGELOG.md | 5 +++++ Makefile | 16 ++++++++++++++++ README.md | 9 ++++----- cliff.toml | 79 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ shard.yml | 2 +- src/terminal.cr | 2 +- 7 files changed, 141 insertions(+), 7 deletions(-) create mode 100644 .pre-commit-config.yaml create mode 100644 CHANGELOG.md create mode 100644 cliff.toml

markterm on  main is 📦 v0.3.1 via 🔮 v1.13.2 ❯ make shards build -Dstrict_multi_assign -Dno_number_autocast Resolving dependencies Fetching https://github.com/chenkovsky/docopt.cr.git Fetching https://github.com/ralsina/tartrazine.git Fetching https://github.com/ralsina/sixteen.git Fetching https://github.com/icyleaf/markd.git Fetching https://github.com/ralsina/baked_file_system.git Fetching https://github.com/crystal-china/base58.cr.git Shard "tartrazine" version (0.6.1) doesn't match tag version (0.6.3) Using markd (0.5.0) Using baked_file_system (0.10.0 at beb3731) Using base58 (0.1.0 at 2b0564a) Installing sixteen (0.3.0 at b133e02) Using docopt (0.2.0 at 620fce4) Using tartrazine (0.6.3) Writing shard.lock Building: markterm

markterm on  main is 📦 v0.3.1 via 🔮 v1.13.2 took 12s ❯ ll bin totaal 8128 drwxrwxr-x 2 kees kees 0 aug 27 16:39 . drwxrwxr-x 7 kees kees 0 aug 27 16:38 .. -rwxrwxr-x 1 kees kees 6420160 aug 27 16:39 markterm

markterm on  main is 📦 v0.3.1 via 🔮 v1.13.2 ❯ bin/markterm README.md Unhandled exception: Unknown lexer: docopt (Exception) from lib/tartrazine/src/lexer.cr:30:5 in 'lexer_by_name' from lib/tartrazine/src/lexer.cr:13:12 in 'lexer' from src/terminal.cr:99:13 in 'highlight' from src/markterm.cr:63:16 in 'code_block' from lib/markd/src/markd/renderer.cr:70:13 in 'render' from src/markterm.cr:203:7 in 'render' from src/markterm.cr:212:5 in 'to_term:theme:code_theme' from src/main.cr:21:8 in 'main' from src/main.cr:32:1 in '__crystal_main' from /home/kees/.asdf/installs/crystal/1.13.2/share/crystal/src/crystal/main.cr:118:5 in 'main_user_code' from /home/kees/.asdf/installs/crystal/1.13.2/share/crystal/src/crystal/main.cr:104:7 in 'main' from /home/kees/.asdf/installs/crystal/1.13.2/share/crystal/src/crystal/main.cr:130:3 in 'main' from /lib/x86_64-linux-gnu/libc.so.6 in '??' from /lib/x86_64-linux-gnu/libc.so.6 in '__libc_start_main' from bin/markterm in '_start' from ???

ralsina commented 2 months ago

The warning is harmless.

I'll do a fix for the error tonight.

ralsina commented 2 months ago

Version 0.3.2 with the fix is now out.

keesse commented 2 months ago

I did a pull and the Makefile disappeared! Copied it from an old directory and could build. The build indeed worked in the Mint Terminal and Terminator with Ctrl+Left mouse button, like you wrote not in Hyper

markterm on  main is 📦 v0.3.1 via 🔮 v1.13.2 ❯ git pull origin main remote: Enumerating objects: 36, done. remote: Counting objects: 100% (36/36), done. remote: Compressing objects: 100% (12/12), done. remote: Total 28 (delta 17), reused 27 (delta 16), pack-reused 0 (from 0) Unpacking objects: 100% (28/28), 3.56 KiB | 113.00 KiB/s, done. From https://github.com/ralsina/markterm

branch main -> FETCH_HEAD c4617e3..8b88a5c main -> origin/main Updating c4617e3..8b88a5c Fast-forward .gitignore | 1 + CHANGELOG.md | 22 ++++++++++++++++++++++ Hacefile.yml | 91 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Makefile | 23 ----------------------- README.md | 1 + build_static.sh | 4 ++-- do_release.sh | 15 +++++++++++++++ shard.yml | 6 +++++- src/terminal.cr | 6 +++++- 9 files changed, 142 insertions(+), 27 deletions(-) create mode 100644 Hacefile.yml delete mode 100644 Makefile create mode 100755 do_release.sh

ralsina commented 2 months ago

I am migrating from Makefiles to a different tool. You can always build using "shards build" anyway. I just updated the build instructions to say that.

On Tue, Aug 27, 2024 at 6:37 PM Kees @.***> wrote:

I did a pull and the Makefile disappeared! Copied it from an old directory and could build. The build indeed worked in the Mint Terminal and Terminator with Ctrl+Left mouse button, like you wrote not in Hyper

markterm on  main is 📦 v0.3.1 via 🔮 v1.13.2 ❯ git pull origin main remote: Enumerating objects: 36, done. remote: Counting objects: 100% (36/36), done. remote: Compressing objects: 100% (12/12), done. remote: Total 28 (delta 17), reused 27 (delta 16), pack-reused 0 (from 0) Unpacking objects: 100% (28/28), 3.56 KiB | 113.00 KiB/s, done. From https://github.com/ralsina/markterm

branch main -> FETCH_HEAD c4617e3 https://github.com/ralsina/markterm/commit/c4617e39859d3f349674a7d80a71f51f5d3e661e ..8b88a5c https://github.com/ralsina/markterm/commit/8b88a5c765487f88927b6068799cbe3183047512 main -> origin/main Updating c4617e3 https://github.com/ralsina/markterm/commit/c4617e39859d3f349674a7d80a71f51f5d3e661e ..8b88a5c https://github.com/ralsina/markterm/commit/8b88a5c765487f88927b6068799cbe3183047512 Fast-forward .gitignore | 1 + CHANGELOG.md | 22 ++++++++++++++++++++++ Hacefile.yml | 91 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Makefile | 23 ----------------------- README.md | 1 + build_static.sh | 4 ++-- do_release.sh | 15 +++++++++++++++ shard.yml | 6 +++++- src/terminal.cr | 6 +++++- 9 files changed, 142 insertions(+), 27 deletions(-) create mode 100644 Hacefile.yml delete mode 100644 Makefile create mode 100755 do_release.sh

— Reply to this email directly, view it on GitHub https://github.com/ralsina/markterm/issues/1#issuecomment-2313623857, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAAAMKZ2KRBCJ6QUH5CURF3ZTTWR3AVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMJTGYZDGOBVG4 . You are receiving this because you modified the open/close state.Message ID: @.***>

keesse commented 2 months ago

Hi Robert,

I did a new git clone and a shards build, that worked fine, only I still got: Shard "tartrazine" version (0.6.1) doesn't match tag version (0.6.3)

Should you change the version number in lib/tartrzine/shards.yml from 0.6.1 to 0.6.3?

P.s. I have a feature request: paging When I page the output throught less, I lose the colors, so if you can build in some form of paging, that would be great!

Regards,

Kees

Op di 27 aug 2024 om 23:40 schreef Roberto Alsina @.***

:

I am migrating from Makefiles to a different tool. You can always build using "shards build" anyway. I just updated the build instructions to say that.

On Tue, Aug 27, 2024 at 6:37 PM Kees @.***> wrote:

I did a pull and the Makefile disappeared! Copied it from an old directory and could build. The build indeed worked in the Mint Terminal and Terminator with Ctrl+Left mouse button, like you wrote not in Hyper

markterm on  main is 📦 v0.3.1 via 🔮 v1.13.2 ❯ git pull origin main remote: Enumerating objects: 36, done. remote: Counting objects: 100% (36/36), done. remote: Compressing objects: 100% (12/12), done. remote: Total 28 (delta 17), reused 27 (delta 16), pack-reused 0 (from 0) Unpacking objects: 100% (28/28), 3.56 KiB | 113.00 KiB/s, done. From https://github.com/ralsina/markterm

branch main -> FETCH_HEAD c4617e3 < https://github.com/ralsina/markterm/commit/c4617e39859d3f349674a7d80a71f51f5d3e661e>

..8b88a5c < https://github.com/ralsina/markterm/commit/8b88a5c765487f88927b6068799cbe3183047512>

main -> origin/main Updating c4617e3 < https://github.com/ralsina/markterm/commit/c4617e39859d3f349674a7d80a71f51f5d3e661e>

..8b88a5c < https://github.com/ralsina/markterm/commit/8b88a5c765487f88927b6068799cbe3183047512>

Fast-forward .gitignore | 1 + CHANGELOG.md | 22 ++++++++++++++++++++++ Hacefile.yml | 91

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Makefile | 23 ----------------------- README.md | 1 + build_static.sh | 4 ++-- do_release.sh | 15 +++++++++++++++ shard.yml | 6 +++++- src/terminal.cr | 6 +++++- 9 files changed, 142 insertions(+), 27 deletions(-) create mode 100644 Hacefile.yml delete mode 100644 Makefile create mode 100755 do_release.sh

— Reply to this email directly, view it on GitHub https://github.com/ralsina/markterm/issues/1#issuecomment-2313623857, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAAAMKZ2KRBCJ6QUH5CURF3ZTTWR3AVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMJTGYZDGOBVG4>

. You are receiving this because you modified the open/close state.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/ralsina/markterm/issues/1#issuecomment-2313627566, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEKTDLIFBZJFSEN2GAIWVVTZTTW3PAVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMJTGYZDONJWGY . You are receiving this because you authored the thread.Message ID: @.***>

ralsina commented 2 months ago

On Wed, Aug 28, 2024 at 4:21 PM Kees @.***> wrote:

Hi Robert,

I did a new git clone and a shards build, that worked fine, only I still got: Shard "tartrazine" version (0.6.1) doesn't match tag version (0.6.3)

Should you change the version number in lib/tartrzine/shards.yml from 0.6.1 to 0.6.3?

It's already changed, no worries, it will settle on a future release.

P.s. I have a feature request: paging When I page the output throught less, I lose the colors, so if you can build in some form of paging, that would be great!

Using less -R should work but doesn't because of something I can fix. Next version will work.

Regards,

Kees

Op di 27 aug 2024 om 23:40 schreef Roberto Alsina @.***

:

I am migrating from Makefiles to a different tool. You can always build using "shards build" anyway. I just updated the build instructions to say that.

On Tue, Aug 27, 2024 at 6:37 PM Kees @.***> wrote:

I did a pull and the Makefile disappeared! Copied it from an old directory and could build. The build indeed worked in the Mint Terminal and Terminator with Ctrl+Left mouse button, like you wrote not in Hyper

markterm on  main is 📦 v0.3.1 via 🔮 v1.13.2 ❯ git pull origin main remote: Enumerating objects: 36, done. remote: Counting objects: 100% (36/36), done. remote: Compressing objects: 100% (12/12), done. remote: Total 28 (delta 17), reused 27 (delta 16), pack-reused 0 (from 0) Unpacking objects: 100% (28/28), 3.56 KiB | 113.00 KiB/s, done. From https://github.com/ralsina/markterm

branch main -> FETCH_HEAD c4617e3 <

https://github.com/ralsina/markterm/commit/c4617e39859d3f349674a7d80a71f51f5d3e661e>

..8b88a5c <

https://github.com/ralsina/markterm/commit/8b88a5c765487f88927b6068799cbe3183047512>

main -> origin/main Updating c4617e3 <

https://github.com/ralsina/markterm/commit/c4617e39859d3f349674a7d80a71f51f5d3e661e>

..8b88a5c <

https://github.com/ralsina/markterm/commit/8b88a5c765487f88927b6068799cbe3183047512>

Fast-forward .gitignore | 1 + CHANGELOG.md | 22 ++++++++++++++++++++++ Hacefile.yml | 91

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Makefile | 23 ----------------------- README.md | 1 + build_static.sh | 4 ++-- do_release.sh | 15 +++++++++++++++ shard.yml | 6 +++++- src/terminal.cr | 6 +++++- 9 files changed, 142 insertions(+), 27 deletions(-) create mode 100644 Hacefile.yml delete mode 100644 Makefile create mode 100755 do_release.sh

— Reply to this email directly, view it on GitHub https://github.com/ralsina/markterm/issues/1#issuecomment-2313623857,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAAAMKZ2KRBCJ6QUH5CURF3ZTTWR3AVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMJTGYZDGOBVG4>

. You are receiving this because you modified the open/close state.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/ralsina/markterm/issues/1#issuecomment-2313627566, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AEKTDLIFBZJFSEN2GAIWVVTZTTW3PAVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMJTGYZDONJWGY>

. You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/ralsina/markterm/issues/1#issuecomment-2316087415, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAAAMK353SLXWJKW7F6ZPCDZTYPKJAVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMJWGA4DONBRGU . You are receiving this because you modified the open/close state.Message ID: @.***>

ralsina commented 2 months ago

It was a one-liner and I have automated releases, so just did a quick one now, remember to use less -R so it shows color.

keesse commented 2 months ago

less -R does not show any colors, except the tick-boxes, at my system on all different terminals

Op wo 28 aug 2024 om 22:35 schreef Roberto Alsina @.***

:

It was a one-liner and I have automated releases, so just did a quick one now, remember to use less -R so it shows color.

— Reply to this email directly, view it on GitHub https://github.com/ralsina/markterm/issues/1#issuecomment-2316204351, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEKTDLOLS7EBD2K33DOP77LZTYX7XAVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMJWGIYDIMZVGE . You are receiving this because you authored the thread.Message ID: @.***>

ralsina commented 2 months ago

It does with the latest version :-)

[image: image.png]

On Fri, Aug 30, 2024 at 6:13 AM Kees @.***> wrote:

less -R does not show any colors, except the tick-boxes, at my system on all different terminals

Op wo 28 aug 2024 om 22:35 schreef Roberto Alsina @.***

:

It was a one-liner and I have automated releases, so just did a quick one now, remember to use less -R so it shows color.

— Reply to this email directly, view it on GitHub https://github.com/ralsina/markterm/issues/1#issuecomment-2316204351, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AEKTDLOLS7EBD2K33DOP77LZTYX7XAVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMJWGIYDIMZVGE>

. You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/ralsina/markterm/issues/1#issuecomment-2320600361, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAAAMK3TQXO3SMO2EI76KZ3ZUAZTHAVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMRQGYYDAMZWGE . You are receiving this because you modified the open/close state.Message ID: @.***>

keesse commented 2 months ago

Yes, see my reply on the Forum. Thanks! Met vriendelijke groeten,

Kees Serier

30 aug. 2024 13:07:38 Roberto Alsina @.***>:

It does with the latest version :-)

[image: image.png]

On Fri, Aug 30, 2024 at 6:13 AM Kees @.***> wrote:

less -R does not show any colors, except the tick-boxes, at my system on all different terminals

Op wo 28 aug 2024 om 22:35 schreef Roberto Alsina @.***

:

It was a one-liner and I have automated releases, so just did a quick one now, remember to use less -R so it shows color.

— Reply to this email directly, view it on GitHub https://github.com/ralsina/markterm/issues/1#issuecomment-2316204351, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AEKTDLOLS7EBD2K33DOP77LZTYX7XAVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMJWGIYDIMZVGE>

. You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/ralsina/markterm/issues/1#issuecomment-2320600361, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAAAMK3TQXO3SMO2EI76KZ3ZUAZTHAVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMRQGYYDAMZWGE . You are receiving this because you modified the open/close state.Message ID: @.***>

— Reply to this email directly, view it on GitHub[https://github.com/ralsina/markterm/issues/1#issuecomment-2320871094], or unsubscribe[https://github.com/notifications/unsubscribe-auth/AEKTDLN2CAZGBCA5F5BASG3ZUBG7VAVCNFSM6AAAAABL5ZWKHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMRQHA3TCMBZGQ]. You are receiving this because you authored the thread. [Tracking afbeelding][https://github.com/notifications/beacon/AEKTDLOLDB5DGEJXRWLZKV3ZUBG7VA5CNFSM6AAAAABL5ZWKHGWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTUKKWXLM.gif]

ralsina / markterm

URL's not working correctly #1