search

ramapcsx2 / gbs-control

GNU General Public License v3.0
784 stars 110 forks source link

Missing Green through SCART RGB #343

Closed Ged91 closed 2 years ago

Ged91 commented 2 years ago

Hi, I did the mods but it seems that green colour is not coming out. I'm using a pal snes through rgb scart cable, that is plugged into P11. Going to the TV is a VGA to HDMI adapter. I checked multiple times my wiring on the female SCART and everything seems ok to me. I'm afraid I may have damaged the GBS PCB while removing the pots. Can anyone suggest some good testing points to find out where green is interrupted? Also, I'm not getting continuity between RP2 and R56, is that normal?

https://imgur.com/a/U0jQ0A4 https://imgur.com/a/1xmX8Mn

JAOT commented 2 years ago

It's dangerous to go alone. Try this: https://github.com/ramapcsx2/gbs-control/issues/342

Ged91 commented 2 years ago

It's dangerous to go alone. Try this: #342

Thank you. That's I was planning to do but I figured I should check with you guys before. I ended just bridging RP2 and R56 and it's working now.

https://imgur.com/a/uzReAEo

JAOT commented 2 years ago

You can close this one, no?