search

ramdor / Thetis

The main working repo for changes to Thetis for the Apache Labs line of radios
47 stars 13 forks source link

Activate / Deactivate cmASIO from within Thetis #401

Open DH1KLM opened 5 months ago

DH1KLM commented 5 months ago

Richie, Would it be possible to add a cmASIO enable/disable button in the main window? Or cmASIO (reg key) is disabled when VAC is enabled (2nd sound card Windows Direct Sound) or something like that.

Roturbo commented 5 months ago

Hi,

i have test the cmASIO, change the registry with the correct ASIO name and it starts to work without the VAC activated, RX ok and on TX i have to reduce a lot on the MIC input, after the adjustment MIC level was ok and all was working.

Than i notice some noise that maybe is from my PC or other source,, i decided to remove the REG entry and go back to normal,, this without change back the MIC gain that i have reduced about 20dB,, after that i never get the audio from LINE input or VAC input.

I made several test and nothing, restart Thetis, Anan and restart the PC, and the audio input was so low that i only see very small input, i also reinstall/repair the software, load the previous database with no change in low audio input.

The only way to get the audio levels back to normal was re-upload the firmware again, after this the levels were all normal again.

Maybe the change of the codecs leave some setting in the radio that didn´t come back to normal after reverting the cmASIO.

Radio is Anan 100D with Thetis v2.10.3.6 01/28/24, if necessary any test please tell me.

Regards