search

ramdor / Thetis

The main working repo for changes to Thetis for the Apache Labs line of radios
47 stars 13 forks source link

[BUG] CW split operations. Sidetone only with subrx on. #406

Closed IU4JNR closed 3 weeks ago

IU4JNR commented 5 months ago

FW 2.2.2 on ANAN7000 DLEMK2; Database created from scratch;

I found that in CW/split the TX monitor is audible only when the subrx is on. In SSB though there is a slight echo, TX monitor works when in split without the need of enabling SubRX.

To Reproduce

  1. Select cw
  2. Select Qsplit
  3. Disable subrx
  4. Sidetone is not reproduced

Desktop (please complete the following information):

Additional context Headphones connected to the front plug

W2PA commented 5 months ago

I can not reproduce this. In the main console, is the sidetone box checked? Are you operating in SEMI or QSK break-in?

With the sidetone box checked you should always hear a sidetone when keying in CW, no matter which break-in mode is selected.

If in QSK mode you will hear both the sidetone and your transmitted tone. If you un-check sidetone in QSK you will only hear your transmitted tone in the main receiver (unless RIT or XIT is on and causing rx and tx frequencies to be different).

If in QSK mode and split, you will hear the sidetone if the sidetone box is checked, plus you will hear your transmitted tone from the subreceiver only if the subreceiver is active.

73, Chris, W2PA

IU4JNR commented 5 months ago

Chris thanks for reply. I didn't mention the bk-in since I can only work semi with my pa. The issue is when I use split and I turn the subrx off ( or even lower the subrx volume). This issue is only in CW and with any combination of sidetone and monitor. This issue arose after prot2/fw 2.2.2 installation. Max Iu4jnr

Inviato da Outlook per Androidhttps://aka.ms/AAb9ysg

From: Chris Codella @.> Sent: Sunday, February 18, 2024 8:39:27 PM To: ramdor/Thetis @.> Cc: IU4JNR @.>; Author @.> Subject: Re: [ramdor/Thetis] [BUG] CW split operations. Sidetone only with subrx on. (Issue #406)

I can not reproduce this. In the main console, is the sidetone box checked? Are you operating in SEMI or QSK break-in?

With the sidetone box checked you should always hear a sidetone when keying in CW, no matter which break-in mode is selected.

If in QSK mode you will hear both the sidetone and your transmitted tone. If you un-check sidetone in QSK you will only hear your transmitted tone in the main receiver (unless RIT or XIT is on and causing rx and tx frequencies to be different).

If in QSK mode and split, you will hear the sidetone if the sidetone box is checked, plus you will hear your transmitted tone from the subreceiver only if the subreceiver is active.

73, Chris, W2PA

— Reply to this email directly, view it on GitHubhttps://github.com/ramdor/Thetis/issues/406#issuecomment-1951425304, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AWO47FZM4RJMW5T5HA2WIHTYUJKG7AVCNFSM6AAAAABDNJWLBOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJRGQZDKMZQGQ. You are receiving this because you authored the thread.Message ID: @.***>

ramdor commented 3 weeks ago

closing as no further update since 18Feb, and @W2PA is unable to replicate.