search

randyzhong / HP-EliteDesk-800-G2-DM-Hackintosh

OpenCore version of HP EliteDesk 800 G2 Desktop Mini Business PC (35W/65W) Hackintosh Support.
55 stars 17 forks source link

USB and internal Airport card #1

Closed anthonyuk closed 3 years ago

anthonyuk commented 3 years ago

I think the internal Airport card is somehow linked to USB power as the wifi part works but not Bluetooth with your USB config. I disabled the USBports.kext and it works fine. A device BRCM20702 is detected on HS07 for me.

ningye2012 commented 3 years ago

I think the internal Airport card is somehow linked to USB power as the wifi part works but not Bluetooth with your USB config. I disabled the USBports.kext and it works fine. A device BRCM20702 is detected on HS07 for me.

me too,and cannot shutdown

anthonyuk commented 3 years ago

I re-did the USB config. My BT card is on HS07 and working now along with all others.

Still have a wake from sleep issue though.

randyzhong commented 3 years ago

@anthonyuk @ningye2012 Thanks for providing updates. Mine disabled built-in M2/BT so I may missed HS07. You can modify your USB Mapping file, remove USR1/2 and add HS07.

In terms of sleeping issue, HD 530 has a known sleep issue, a possible workaround is to disable HDMI audio by replacing the "hda-gfx" property with "no-hda-gfx" in your config.plist, but you will lost monitor audio.

ningye2012 commented 3 years ago

@randyzhong Thanks for your share.

ningye2012 commented 3 years ago

@randyzhong But again, I'm on another HP 600g2 DM（ CPU:6400T ）Using my original self configured oc0.6.2, the sleep is basically normal and there is no black screen phenomenon. It can wake up. Except for the Automatic wake-up after the nap is enabled, if you don't open the nap, you can basically wake up normally. This seems to indicate that it is not necessarily the problem of hd530.

anthonyuk commented 3 years ago

@randyzhong Thanks. That is exactly what I did to resolve the USB issue. I use the no-hda-gfx as I have had issues in the past getting dual displays to work.

I'll keep working on it but so far this is the most compatible build I have had so thanks again.

randyzhong commented 3 years ago

No new updates, hence closing this issue.