Open riverbasin opened 4 years ago
Oups no I don’t !
I if doesn’t come back up I’ll ask around . I never actually had the panel made. So I never flashed the firmware on my build
Le 29 oct. 2019 à 20:22, riverbasin notifications@github.com a écrit :
Hello raphschwarz. It looks like the Circuit Abbey website is down - hence all of the supporting material for this module, including firmware, are not available. Do you know of an alternate source for supporting documentation and firmware? Best, riverbasin
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/raphschwarz/Circuit-Abbey-G8-DIY-EDIT/issues/1?email_source=notifications&email_token=AEBS2C2FM6G7U3XGZ23TVBTQRCEPRA5CNFSM4JGOGCRKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HVFQUXA, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEBS2C3XTPK4YCWWMDHBFNLQRCEPRANCNFSM4JGOGCRA.
Okay, good to know.
You must be aware that Pusherman productions is producing this panel and PCB as a DIY project? Here’s the link:
https://pushermanproductions.com/product/g8-clock-divider-pcb-aluminium-panel/
Best, Byron
On Tue, Oct 29, 2019 at 1:05 PM MIDORI notifications@github.com wrote:
Oups no I don’t !
I if doesn’t come back up I’ll ask around . I never actually had the panel made. So I never flashed the firmware on my build
Le 29 oct. 2019 à 20:22, riverbasin notifications@github.com a écrit :
Hello raphschwarz. It looks like the Circuit Abbey website is down - hence all of the supporting material for this module, including firmware, are not available. Do you know of an alternate source for supporting documentation and firmware? Best, riverbasin
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub < https://github.com/raphschwarz/Circuit-Abbey-G8-DIY-EDIT/issues/1?email_source=notifications&email_token=AEBS2C2FM6G7U3XGZ23TVBTQRCEPRA5CNFSM4JGOGCRKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HVFQUXA>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AEBS2C3XTPK4YCWWMDHBFNLQRCEPRANCNFSM4JGOGCRA .
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/raphschwarz/Circuit-Abbey-G8-DIY-EDIT/issues/1?email_source=notifications&email_token=AAIGUAJ472EHKQ4KNC4KZ7DQRCJSJA5CNFSM4JGOGCRKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECR42YI#issuecomment-547605857, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAIGUAKX3BM4RC5FX4YRUXTQRCJSJANCNFSM4JGOGCRA .
Yes I know ! someone in pusherman groups must have it. If you find it don’t hesitate to send it to me I’ll host it with the board files so it is safely hosted for future generations ahaha
Le 29 oct. 2019 à 21:34, riverbasin notifications@github.com a écrit :
Okay, good to know.
You must be aware that Pusherman productions is producing this panel and PCB as a DIY project? Here’s the link:
https://pushermanproductions.com/product/g8-clock-divider-pcb-aluminium-panel/
Best, Byron
On Tue, Oct 29, 2019 at 1:05 PM MIDORI notifications@github.com wrote:
Oups no I don’t !
I if doesn’t come back up I’ll ask around . I never actually had the panel made. So I never flashed the firmware on my build
Le 29 oct. 2019 à 20:22, riverbasin notifications@github.com a écrit :
Hello raphschwarz. It looks like the Circuit Abbey website is down - hence all of the supporting material for this module, including firmware, are not available. Do you know of an alternate source for supporting documentation and firmware? Best, riverbasin
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub < https://github.com/raphschwarz/Circuit-Abbey-G8-DIY-EDIT/issues/1?email_source=notifications&email_token=AEBS2C2FM6G7U3XGZ23TVBTQRCEPRA5CNFSM4JGOGCRKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HVFQUXA>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AEBS2C3XTPK4YCWWMDHBFNLQRCEPRANCNFSM4JGOGCRA .
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/raphschwarz/Circuit-Abbey-G8-DIY-EDIT/issues/1?email_source=notifications&email_token=AAIGUAJ472EHKQ4KNC4KZ7DQRCJSJA5CNFSM4JGOGCRKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECR42YI#issuecomment-547605857, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAIGUAKX3BM4RC5FX4YRUXTQRCJSJANCNFSM4JGOGCRA .
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/raphschwarz/Circuit-Abbey-G8-DIY-EDIT/issues/1?email_source=notifications&email_token=AEBS2C7GI7YUAWX7GRCJ433QRCM6DA5CNFSM4JGOGCRKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECR7SYA#issuecomment-547617120, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEBS2C6REPG3BRLO22MHG23QRCM6DANCNFSM4JGOGCRA.
Sounds great. I have contacted Phil at Pusherman as well as posted on the Pusherman Facebook page. We’ll see what comes of it. I will keep you posted.
Also I did some more searching, and I found out that Circuit Abby is having some medical issues. Check out their Facebook page. They seem in good spirits, but their webpage will be down for a while.
Best, Byron
On Tue, Oct 29, 2019 at 1:38 PM MIDORI notifications@github.com wrote:
Yes I know ! someone in pusherman groups must have it. If you find it don’t hesitate to send it to me I’ll host it with the board files so it is safely hosted for future generations ahaha
Le 29 oct. 2019 à 21:34, riverbasin notifications@github.com a écrit :
Okay, good to know.
You must be aware that Pusherman productions is producing this panel and PCB as a DIY project? Here’s the link:
https://pushermanproductions.com/product/g8-clock-divider-pcb-aluminium-panel/
Best, Byron
On Tue, Oct 29, 2019 at 1:05 PM MIDORI notifications@github.com wrote:
Oups no I don’t !
I if doesn’t come back up I’ll ask around . I never actually had the panel made. So I never flashed the firmware on my build
Le 29 oct. 2019 à 20:22, riverbasin notifications@github.com a écrit :
Hello raphschwarz. It looks like the Circuit Abbey website is down - hence all of the supporting material for this module, including firmware, are not available. Do you know of an alternate source for supporting documentation and firmware? Best, riverbasin
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <
https://github.com/notifications/unsubscribe-auth/AEBS2C3XTPK4YCWWMDHBFNLQRCEPRANCNFSM4JGOGCRA
.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/raphschwarz/Circuit-Abbey-G8-DIY-EDIT/issues/1?email_source=notifications&email_token=AAIGUAJ472EHKQ4KNC4KZ7DQRCJSJA5CNFSM4JGOGCRKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECR42YI#issuecomment-547605857 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAIGUAKX3BM4RC5FX4YRUXTQRCJSJANCNFSM4JGOGCRA
.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/raphschwarz/Circuit-Abbey-G8-DIY-EDIT/issues/1?email_source=notifications&email_token=AEBS2C7GI7YUAWX7GRCJ433QRCM6DA5CNFSM4JGOGCRKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECR7SYA#issuecomment-547617120>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AEBS2C6REPG3BRLO22MHG23QRCM6DANCNFSM4JGOGCRA .
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/raphschwarz/Circuit-Abbey-G8-DIY-EDIT/issues/1?email_source=notifications&email_token=AAIGUAOO4WCQZNUFNC3DJFLQRCNMDA5CNFSM4JGOGCRKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECR76LQ#issuecomment-547618606, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAIGUAN7CZGKNMICC2DGDETQRCNMDANCNFSM4JGOGCRA .
All right. Some smart person over at Pusherman Facebook page suggested the obvious-in-hindsight web archive to go to a cached version of the Circuit Abbey webpage. The critical files are attached.
Best, Byron
On Tue, Oct 29, 2019 at 1:38 PM MIDORI notifications@github.com wrote:
Yes I know ! someone in pusherman groups must have it. If you find it don’t hesitate to send it to me I’ll host it with the board files so it is safely hosted for future generations ahaha
Le 29 oct. 2019 à 21:34, riverbasin notifications@github.com a écrit :
Okay, good to know.
You must be aware that Pusherman productions is producing this panel and PCB as a DIY project? Here’s the link:
https://pushermanproductions.com/product/g8-clock-divider-pcb-aluminium-panel/
Best, Byron
On Tue, Oct 29, 2019 at 1:05 PM MIDORI notifications@github.com wrote:
Oups no I don’t !
I if doesn’t come back up I’ll ask around . I never actually had the panel made. So I never flashed the firmware on my build
Le 29 oct. 2019 à 20:22, riverbasin notifications@github.com a écrit :
Hello raphschwarz. It looks like the Circuit Abbey website is down - hence all of the supporting material for this module, including firmware, are not available. Do you know of an alternate source for supporting documentation and firmware? Best, riverbasin
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <
https://github.com/notifications/unsubscribe-auth/AEBS2C3XTPK4YCWWMDHBFNLQRCEPRANCNFSM4JGOGCRA
.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/raphschwarz/Circuit-Abbey-G8-DIY-EDIT/issues/1?email_source=notifications&email_token=AAIGUAJ472EHKQ4KNC4KZ7DQRCJSJA5CNFSM4JGOGCRKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECR42YI#issuecomment-547605857 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAIGUAKX3BM4RC5FX4YRUXTQRCJSJANCNFSM4JGOGCRA
.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/raphschwarz/Circuit-Abbey-G8-DIY-EDIT/issues/1?email_source=notifications&email_token=AEBS2C7GI7YUAWX7GRCJ433QRCM6DA5CNFSM4JGOGCRKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECR7SYA#issuecomment-547617120>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AEBS2C6REPG3BRLO22MHG23QRCM6DANCNFSM4JGOGCRA .
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/raphschwarz/Circuit-Abbey-G8-DIY-EDIT/issues/1?email_source=notifications&email_token=AAIGUAOO4WCQZNUFNC3DJFLQRCNMDA5CNFSM4JGOGCRKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECR76LQ#issuecomment-547618606, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAIGUAN7CZGKNMICC2DGDETQRCNMDANCNFSM4JGOGCRA .
Hello raphschwarz. It looks like the Circuit Abbey website is down - hence all of the supporting material for this module, including firmware, are not available. Do you know of an alternate source for supporting documentation and firmware? Best, riverbasin