search

raspberrypi / linux

Kernel source tree for Raspberry Pi-provided kernel builds. Issues unrelated to the linux kernel should be posted on the community forum at https://forums.raspberrypi.com/
Other
11.08k stars 4.96k forks source link

crash cfg80211 #3670

Open BuMRK opened 4 years ago

BuMRK commented 4 years ago

System Information

Raspberry Pi 2 Model B Rev 1.1 PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)"

Raspberry Pi reference 2016-03-18 Generated using Pi-gen, https://github.com/RPi-Distro/Pi-gen, stage4

Linux raspberrypi3b 5.4.45-v7+ #1321 SMP Wed Jun 10 17:33:27 BST 2020 armv7l GNU/Linux Revision : a21041 Serial : 000000001751ab75 Model : Raspberry Pi 2 Model B Rev 1.1 Throttled flag : throttled=0x0 Camera : supported=1 detected=0

Videocore information

Jun 10 2020 17:53:29 Copyright (c) 2012 Broadcom version e46bba1638cca2708b31b9daf4636770ef981735 (clean) (release) (start_x)

alloc failures: 0 compactions: 0 legacy block fails: 0

Filesystem information

Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 16104372 11959200 3304060 79% / devtmpfs 341672 0 341672 0% /dev tmpfs 374952 280 374672 1% /dev/shm tmpfs 374952 14896 360056 4% /run tmpfs 5120 4 5116 1% /run/lock tmpfs 374952 0 374952 0% /sys/fs/cgroup /dev/mmcblk0p6 64366 23920 40446 38% /boot tmpfs 74988 0 74988 0% /run/user/999 tmpfs 74988 0 74988 0% /run/user/1001

Filename Type Size Used Priority /var/swap file 102396 512 -2

Package version information

raspberrypi-ui-mods: Installed: (none) raspberrypi-sys-mods: Installed: (none) openbox: Installed: (none) lxpanel: Installed: (none) pcmanfm: Installed: (none) rpd-plym-splash: Installed: (none)

Networking Information

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0 inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0 inet6 y::y.y.y.y prefixlen 64 scopeid 0x20 ether m.m.m.m txqueuelen 1000 (Ethernet) RX packets 241314 bytes 115425110 (110.0 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 53202 bytes 6140619 (5.8 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet x.x.x.x netmask x.x.x.x inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 218 bytes 19642 (19.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 218 bytes 19642 (19.1 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet x.x.x.x netmask x.x.x.x destination x.x.x.x inet6 y::y.y.y.y prefixlen 64 scopeid 0x20 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 34 bytes 1632 (1.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether m.m.m.m txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 1805 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

USB Information

/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M | Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M | Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M |__ Port 2: Dev 4, If 0, Class=Vendor Specific Class, Driver=rtl8192cu, 480M

Display Information

Running Legacy framebuffer

Display: 2 state 0xa [HDMI CEA (31) RGB lim 16:9], 1920x1080 @ 50.00Hz, progressive [E] No device present

config.txt

aphy_params_current=819 arm_freq=900 audio_pwm_mode=514 config_hdmi_boost=5 disable_auto_turbo=1 disable_commandline_tags=2 disable_l2cache=1 disable_overscan=1 disable_splash=1 display_hdmi_rotate=-1 display_lcd_rotate=-1 dphy_params_current=547 enable_tvout=1 enable_uart=1 force_eeprom_read=1 force_pwm_open=1 framebuffer_ignore_alpha=1 framebuffer_swap=1 init_uart_clock=0x2dc6c00 lcd_framerate=60 lcd_rotate=1 over_voltage_avs=0x1b774 pause_burst_frames=1 program_serial_random=1 sdram_freq=450 second_boot=1 total_mem=1024 hdmi_force_cec_address:0=65535 hdmi_force_cec_address:1=65535 hdmi_force_hotplug:0=1 hdmi_group:0=1 hdmi_mode:0=31 hdmi_pixel_freq_limit:0=0x9a7ec80 device_tree=- overlay_prefix=overlays/ hdmi_cvt:0= hdmi_cvt:1= hdmi_edid_filename:0= hdmi_edid_filename:1= hdmi_timings:0= hdmi_timings:1=

cmdline.txt

coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait plymouth.enable=0

raspi-gpio settings

BANK0 (GPIO 0 to 27): GPIO 00: level=1 fsel=0 alt= func=INPUT GPIO 01: level=1 fsel=0 alt= func=INPUT GPIO 02: level=1 fsel=4 alt=0 func=SDA1 GPIO 03: level=1 fsel=4 alt=0 func=SCL1 GPIO 04: level=1 fsel=0 alt= func=INPUT GPIO 05: level=1 fsel=0 alt= func=INPUT GPIO 06: level=1 fsel=0 alt= func=INPUT GPIO 07: level=1 fsel=1 alt= func=OUTPUT GPIO 08: level=1 fsel=1 alt= func=OUTPUT GPIO 09: level=0 fsel=4 alt=0 func=SPI0_MISO GPIO 10: level=0 fsel=4 alt=0 func=SPI0_MOSI GPIO 11: level=0 fsel=4 alt=0 func=SPI0_SCLK GPIO 12: level=0 fsel=0 alt= func=INPUT GPIO 13: level=0 fsel=0 alt= func=INPUT GPIO 14: level=1 fsel=4 alt=0 func=TXD0 GPIO 15: level=1 fsel=4 alt=0 func=RXD0 GPIO 16: level=0 fsel=0 alt= func=INPUT GPIO 17: level=0 fsel=0 alt= func=INPUT GPIO 18: level=0 fsel=0 alt= func=INPUT GPIO 19: level=0 fsel=0 alt= func=INPUT GPIO 20: level=0 fsel=0 alt= func=INPUT GPIO 21: level=0 fsel=0 alt= func=INPUT GPIO 22: level=0 fsel=0 alt= func=INPUT GPIO 23: level=0 fsel=0 alt= func=INPUT GPIO 24: level=0 fsel=0 alt= func=INPUT GPIO 25: level=0 fsel=0 alt= func=INPUT GPIO 26: level=0 fsel=0 alt= func=INPUT GPIO 27: level=0 fsel=0 alt= func=INPUT BANK1 (GPIO 28 to 45): GPIO 28: level=1 fsel=4 alt=0 func=SDA0 GPIO 29: level=1 fsel=4 alt=0 func=SCL0 GPIO 30: level=0 fsel=0 alt= func=INPUT GPIO 31: level=1 fsel=1 alt= func=OUTPUT GPIO 32: level=0 fsel=1 alt= func=OUTPUT GPIO 33: level=0 fsel=0 alt= func=INPUT GPIO 34: level=1 fsel=0 alt= func=INPUT GPIO 35: level=1 fsel=0 alt= func=INPUT GPIO 36: level=1 fsel=0 alt= func=INPUT GPIO 37: level=0 fsel=0 alt= func=INPUT GPIO 38: level=1 fsel=1 alt= func=OUTPUT GPIO 39: level=0 fsel=0 alt= func=INPUT GPIO 40: level=0 fsel=4 alt=0 func=PWM0 GPIO 41: level=0 fsel=1 alt= func=OUTPUT GPIO 42: level=1 fsel=1 alt= func=OUTPUT GPIO 43: level=1 fsel=0 alt= func=INPUT GPIO 44: level=1 fsel=4 alt=0 func=GPCLK1 GPIO 45: level=0 fsel=4 alt=0 func=PWM1 BANK2 (GPIO 46 to 53): GPIO 46: level=1 fsel=0 alt= func=INPUT GPIO 47: level=0 fsel=1 alt= func=OUTPUT GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0 GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1 GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2 GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3

vcdbg log messages

001050.483: brfs: File read: /mfs/sd/config.txt 001051.699: brfs: File read: 1864 bytes 001076.733: HDMI:EDID error reading EDID block 0 attempt 0 001078.037: HDMI:EDID error reading EDID block 0 attempt 1 001079.330: HDMI:EDID error reading EDID block 0 attempt 2 001080.625: HDMI:EDID error reading EDID block 0 attempt 3 001081.918: HDMI:EDID error reading EDID block 0 attempt 4 001083.213: HDMI:EDID error reading EDID block 0 attempt 5 001084.506: HDMI:EDID error reading EDID block 0 attempt 6 001085.802: HDMI:EDID error reading EDID block 0 attempt 7 001087.094: HDMI:EDID error reading EDID block 0 attempt 8 001088.390: HDMI:EDID error reading EDID block 0 attempt 9 001089.446: HDMI:EDID giving up on reading EDID block 0 001095.054: brfs: File read: /mfs/sd/config.txt 001096.197: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined 001722.911: gpioman: gpioman_get_pin_num: pin WL_LPO_CLK not defined 001722.984: gpioman: gpioman_get_pin_num: pin BT_ON not defined 001723.048: gpioman: gpioman_get_pin_num: pin WL_ON not defined 001897.708: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined 001898.995: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined 001899.095: *** Restart logging 001899.157: brfs: File read: 1864 bytes 001899.972: hdmi: HDMI:EDID error reading EDID block 0 attempt 0 001901.275: hdmi: HDMI:EDID error reading EDID block 0 attempt 1 001902.572: hdmi: HDMI:EDID error reading EDID block 0 attempt 2 001903.869: hdmi: HDMI:EDID error reading EDID block 0 attempt 3 001905.166: hdmi: HDMI:EDID error reading EDID block 0 attempt 4 001906.463: hdmi: HDMI:EDID error reading EDID block 0 attempt 5 001907.760: hdmi: HDMI:EDID error reading EDID block 0 attempt 6 001909.057: hdmi: HDMI:EDID error reading EDID block 0 attempt 7 001910.354: hdmi: HDMI:EDID error reading EDID block 0 attempt 8 001911.650: hdmi: HDMI:EDID error reading EDID block 0 attempt 9 001912.710: hdmi: HDMI:EDID giving up on reading EDID block 0 001913.076: hdmi: HDMI:EDID error reading EDID block 0 attempt 0 001914.380: hdmi: HDMI:EDID error reading EDID block 0 attempt 1 001915.683: hdmi: HDMI:EDID error reading EDID block 0 attempt 2 001916.986: hdmi: HDMI:EDID error reading EDID block 0 attempt 3 001918.291: hdmi: HDMI:EDID error reading EDID block 0 attempt 4 001919.594: hdmi: HDMI:EDID error reading EDID block 0 attempt 5 001920.897: hdmi: HDMI:EDID error reading EDID block 0 attempt 6 001922.200: hdmi: HDMI:EDID error reading EDID block 0 attempt 7 001923.503: hdmi: HDMI:EDID error reading EDID block 0 attempt 8 001924.806: hdmi: HDMI:EDID error reading EDID block 0 attempt 9 001925.872: hdmi: HDMI:EDID giving up on reading EDID block 0 001931.515: HDMI0: hdmi_pixel_encoding: 162000000

001936.742: dtb_file 'bcm2709-rpi-2-b.dtb' 001943.691: brfs: File read: /mfs/sd/bcm2709-rpi-2-b.dtb 001943.755: Loading 'bcm2709-rpi-2-b.dtb' to 0x100 size 0x66eb 001981.114: brfs: File read: 26347 bytes 001999.103: brfs: File read: /mfs/sd/overlays/overlay_map.dtb 002207.637: brfs: File read: 1371 bytes 002213.412: brfs: File read: /mfs/sd/config.txt 002213.994: dtparam: i2c_arm=on 002237.798: dtparam: spi=on 002258.926: dtparam: audio=on 002304.953: brfs: File read: 1864 bytes 002308.680: brfs: File read: /mfs/sd/cmdline.txt 002308.782: Read command line from file 'cmdline.txt': 002308.846: 'dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait plymouth.enable=0' 004429.402: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined 004569.230: gpioman: gpioman_get_pin_num: pin WL_ON not defined 004584.796: brfs: File read: 153 bytes 004934.238: brfs: File read: /mfs/sd/kernel7.img 004934.299: Loading 'kernel7.img' to 0x8000 size 0x555a38 004934.367: Device tree loaded to 0x2efe9500 (size 0x6af7) 004935.312: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined 008230.375: vchiq_core: vchiq_init_state: slot_zero = 0xead80000, is_master = 1 008235.180: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead 008241.310: TV service:host side not connected, dropping notification 0x00000002, 0x00000001, 0x0000001f 016337.702: camsubs: Looking for camera 0: i2c_port = 0, led gpio = 32, power enable gpio = 41 016638.485: camsubs: Camera not found 016638.564: camsubs: Looking for camera 0: i2c_port = 0, led gpio = 32, power enable gpio = 41 016939.332: camsubs: Camera not found 016939.410: camsubs: Looking for camera 0: i2c_port = 0, led gpio = 32, power enable gpio = 41 016940.170: camsubs: Camera not found 016940.249: camsubs: Looking for camera 0: i2c_port = 0, led gpio = 32, power enable gpio = 41 016941.000: camsubs: Camera not found 016941.076: camsubs: Looking for camera 0: i2c_port = 0, led gpio = 32, power enable gpio = 41 016941.841: camsubs: Camera not found 4272269.015: hdmi: HDMI:EDID error reading EDID block 0 attempt 0 4272270.326: hdmi: HDMI:EDID error reading EDID block 0 attempt 1 4272271.625: hdmi: HDMI:EDID error reading EDID block 0 attempt 2 4272272.924: hdmi: HDMI:EDID error reading EDID block 0 attempt 3 4272274.224: hdmi: HDMI:EDID error reading EDID block 0 attempt 4 4272275.526: hdmi: HDMI:EDID error reading EDID block 0 attempt 5 4272276.924: hdmi: HDMI:EDID error reading EDID block 0 attempt 6 4272278.223: hdmi: HDMI:EDID error reading EDID block 0 attempt 7 4272279.523: hdmi: HDMI:EDID error reading EDID block 0 attempt 8 4272280.830: hdmi: HDMI:EDID error reading EDID block 0 attempt 9 4272281.894: hdmi: HDMI:EDID giving up on reading EDID block 0

dmesg log

[ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 5.4.45-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1321 SMP Wed Jun 10 17:33:27 BST 2020 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x2ac00000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] On node 0 totalpages: 192512 [ 0.000000] Normal zone: 1504 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 192512 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s49792 r8192 d23936 u81920 [ 0.000000] pcpu-alloc: s49792 r8192 d23936 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 191008 [ 0.000000] Kernel command line: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait plymouth.enable=0 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 683344K/770048K available (8192K kernel code, 680K rwdata, 2532K rodata, 1024K init, 824K bss, 21168K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 27910 entries in 55 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x328/0x4e8 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000029] Switching to timer-based delay loop, resolution 52ns [ 0.000375] Console: colour dummy device 80x30 [ 0.001055] printk: console [tty1] enabled [ 0.001142] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001201] pid_max: default: 32768 minimum: 301 [ 0.001634] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001697] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003274] CPU: Testing write buffer coherency: ok [ 0.004105] CPU0: update cpu_capacity 1024 [ 0.004152] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.005528] Setting up static identity map for 0x100000 - 0x10003c [ 0.005851] rcu: Hierarchical SRCU implementation. [ 0.006836] smp: Bringing up secondary CPUs ... [ 0.008489] CPU1: update cpu_capacity 1024 [ 0.008500] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.010541] CPU2: update cpu_capacity 1024 [ 0.010552] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.012246] CPU3: update cpu_capacity 1024 [ 0.012258] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.012459] smp: Brought up 1 node, 4 CPUs [ 0.012579] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.012612] CPU: All CPU(s) started in HYP mode. [ 0.012641] CPU: Virtualization extensions available. [ 0.013874] devtmpfs: initialized [ 0.033602] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.034045] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.034126] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.037989] pinctrl core: initialized pinctrl subsystem [ 0.039644] NET: Registered protocol family 16 [ 0.044653] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.052577] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.052638] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.052954] Serial: AMBA PL011 UART driver [ 0.055500] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.080306] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-06-10 17:53, variant start_x [ 0.090326] raspberrypi-firmware soc:firmware: Firmware hash is e46bba1638cca2708b31b9daf4636770ef981735 [ 0.157898] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.160932] SCSI subsystem initialized [ 0.161370] usbcore: registered new interface driver usbfs [ 0.161484] usbcore: registered new interface driver hub [ 0.161693] usbcore: registered new device driver usb [ 0.164264] clocksource: Switched to clocksource arch_sys_counter [ 1.323972] VFS: Disk quotas dquot_6.6.0 [ 1.324173] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.324519] FS-Cache: Loaded [ 1.324949] CacheFiles: Loaded [ 1.340796] thermal_sys: Registered thermal governor 'step_wise' [ 1.341360] NET: Registered protocol family 2 [ 1.342873] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.342966] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.343138] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.343358] TCP: Hash tables configured (established 8192 bind 8192) [ 1.343607] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.343710] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.344165] NET: Registered protocol family 1 [ 1.345304] RPC: Registered named UNIX socket transport module. [ 1.345352] RPC: Registered udp transport module. [ 1.345383] RPC: Registered tcp transport module. [ 1.345414] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.347447] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.351843] Initialise system trusted keyrings [ 1.352270] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.366085] FS-Cache: Netfs 'nfs' registered for caching [ 1.367041] NFS: Registering the id_resolver key type [ 1.367149] Key type id_resolver registered [ 1.367183] Key type id_legacy registered [ 1.367228] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.368920] Key type asymmetric registered [ 1.368965] Asymmetric key parser 'x509' registered [ 1.369057] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.369104] io scheduler mq-deadline registered [ 1.369137] io scheduler kyber registered [ 1.372461] bcm2708_fb soc:fb: FB found 1 display(s) [ 1.453077] Console: switching to colour frame buffer device 240x67 [ 1.489705] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 [ 1.492076] raspberrypi-clk firmware-clocks: CPU frequency range: min 600000000, max 900000000 [ 1.497085] bcm2835-rng 3f104000.rng: hwrng registered [ 1.497874] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 1.499105] vc-sm: Videocore shared memory driver [ 1.499964] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 1.517942] brd: module loaded [ 1.535449] loop: module loaded [ 1.537521] Loading iSCSI transport class v2.0-870. [ 1.538994] libphy: Fixed MDIO Bus: probed [ 1.539330] usbcore: registered new interface driver lan78xx [ 1.539609] usbcore: registered new interface driver smsc95xx [ 1.539827] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.268508] Core Release: 2.80a [ 2.268651] Setting default values for core params [ 2.268862] Finished setting default values for core params [ 2.469529] Using Buffer DMA mode [ 2.469670] Periodic Transfer Interrupt Enhancement - disabled [ 2.469872] Multiprocessor Interrupt Enhancement - disabled [ 2.470067] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 2.470231] Dedicated Tx FIFOs mode [ 2.471043] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = aad14000 dma = 0xead14000 len=9024 [ 2.471388] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 2.472050] dwc_otg: Microframe scheduler enabled [ 2.472148] WARN::hcd_init_fiq:457: FIQ on core 1 [ 2.472317] WARN::hcd_init_fiq:458: FIQ ASM at 806bc5bc length 36 [ 2.472530] WARN::hcd_init_fiq:497: MPHI regs_base at af810000 [ 2.472748] dwc_otg 3f980000.usb: DWC OTG Controller [ 2.472973] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 2.482263] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 2.491313] Init: Port Power? op_state=1 [ 2.500200] Init: Power Port (0) [ 2.509443] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.518369] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.527254] usb usb1: Product: DWC OTG Controller [ 2.536051] usb usb1: Manufacturer: Linux 5.4.45-v7+ dwc_otg_hcd [ 2.544834] usb usb1: SerialNumber: 3f980000.usb [ 2.554584] hub 1-0:1.0: USB hub found [ 2.563603] hub 1-0:1.0: 1 port detected [ 2.573611] dwc_otg: FIQ enabled [ 2.573626] dwc_otg: NAK holdoff enabled [ 2.573638] dwc_otg: FIQ split-transaction FSM enabled [ 2.573657] Module dwc_common_port init [ 2.574160] usbcore: registered new interface driver usb-storage [ 2.583398] mousedev: PS/2 mouse device common for all mice [ 2.594434] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 2.606212] sdhci: Secure Digital Host Controller Interface driver [ 2.615139] sdhci: Copyright(c) Pierre Ossman [ 2.624820] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 2.634274] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.644332] ledtrig-cpu: registered to indicate activity on CPUs [ 2.653593] hidraw: raw HID events driver (C) Jiri Kosina [ 2.662714] usbcore: registered new interface driver usbhid [ 2.671651] usbhid: USB HID core driver [ 2.682213] vchiq: vchiq_init_state: slot_zero = (ptrval)

[ 2.704181] [vc_sm_connected_init]: end - returning 0 [ 2.715724] Initializing XFRM netlink socket [ 2.724789] NET: Registered protocol family 17 [ 2.733864] Key type dns_resolver registered [ 2.743518] Registering SWP/SWPB emulation handler [ 2.753021] registered taskstats version 1 [ 2.761955] Loading compiled-in X.509 certificates [ 2.771287] Key type ._fscrypt registered [ 2.780027] Key type .fscrypt registered [ 2.788914] Indeed it is in host mode hprt0 = 00021501 [ 2.813120] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 2.821715] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 2.884515] random: fast init done [ 2.888542] printk: console [ttyAMA0] enabled [ 3.004345] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.008805] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.011678] Indeed it is in host mode hprt0 = 00001101 [ 3.951221] sdhost: log_buf @ (ptrval) (ead13000) [ 4.012474] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 4.029977] of_cfs_init [ 4.041616] of_cfs_init: OK [ 4.055094] Waiting for root device /dev/mmcblk0p7... [ 4.117156] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.124830] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 4.150739] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.166796] mmc0: new high speed SDHC card at address aaaa [ 4.167843] hub 1-1:1.0: USB hub found [ 4.182686] mmcblk0: mmc0:aaaa SL32G 29.7 GiB [ 4.194295] hub 1-1:1.0: 5 ports detected [ 4.230253] mmcblk0: p1 p2 < p5 p6 p7 p8 p9 p10 > [ 4.292384] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) [ 4.309413] VFS: Mounted root (ext4 filesystem) readonly on device 179:7. [ 4.337574] devtmpfs: mounted [ 4.357275] Freeing unused kernel memory: 1024K [ 4.370908] Run /sbin/init as init process [ 4.534354] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 4.674736] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 4.692224] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.711815] smsc95xx v1.0.6 [ 4.819810] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, m.m.m.m [ 4.934354] usb 1-1.2: new high-speed USB device number 4 using dwc_otg [ 5.076314] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8176, bcdDevice= 2.00 [ 5.094373] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.111151] usb 1-1.2: Product: 802.11n WLAN Adapter [ 5.125360] usb 1-1.2: Manufacturer: Realtek [ 5.138786] usb 1-1.2: SerialNumber: 00e04c000001 [ 5.360944] systemd[1]: System time before build time, advancing clock. [ 5.570152] NET: Registered protocol family 10 [ 5.586636] Segment Routing with IPv6 [ 5.649122] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.699271] systemd[1]: Detected architecture arm. [ 5.835882] systemd[1]: Set hostname to . [ 6.142731] uart-pl011 3f201000.serial: no DMA platform data [ 7.253462] systemd[1]: /lib/systemd/system/smbd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly. [ 7.365644] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly. [ 7.436481] systemd[1]: /lib/systemd/system/lighttpd.service:6: PIDFile= references path below legacy directory /var/run/, updating /var/run/lighttpd.pid → /run/lighttpd.pid; please update the unit file accordingly. [ 7.524004] systemd[1]: /lib/systemd/system/fail2ban.service:11: PIDFile= references path below legacy directory /var/run/, updating /var/run/fail2ban/fail2ban.pid → /run/fail2ban/fail2ban.pid; please update the unit file accordingly. [ 7.744128] random: systemd: uninitialized urandom read (16 bytes read) [ 7.796320] random: systemd: uninitialized urandom read (16 bytes read) [ 7.815664] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.847648] random: systemd: uninitialized urandom read (16 bytes read) [ 7.867114] systemd[1]: Listening on Syslog Socket. [ 7.943478] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 8.127340] i2c /dev entries driver [ 9.185458] EXT4-fs (mmcblk0p7): re-mounted. Opts: (null) [ 9.520373] systemd-journald[152]: Received request to flush runtime journal from PID 1 [ 10.614624] mc: Linux media interface: v0.10 [ 10.661904] videodev: Linux video capture interface: v2.00 [ 10.665656] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 10.669612] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[ 10.701281] [vc_sm_connected_init]: installed successfully [ 10.730958] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 10.734862] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 10.739120] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 10.740996] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 10.754835] bcm2835-isp bcm2835-isp: bcm2835_isp_get_supported_fmts: port has more encoding than we provided space for. Some are dropped. [ 10.755522] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 10.757608] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 10.760108] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 10.761717] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 10.764571] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 10.768166] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 10.769066] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 10.769102] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 10.769129] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 10.769153] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 10.769623] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 10.773771] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 10.778445] bcm2835_audio bcm2835_audio: card created with 4 channels [ 10.808124] bcm2835_audio bcm2835_audio: card created with 4 channels [ 11.416129] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 11.416211] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 11.430885] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 11.431002] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 11.470315] : bcm2835_codec_get_supported_fmts: port has more encoding than we provided space for. Some are dropped. [ 11.474141] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 11.474210] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 11.862151] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.117513] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.122481] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 12.122521] cfg80211: failed to load regulatory.db [ 12.652549] usbcore: registered new interface driver rtl8192cu [ 16.380314] Driver for 1-wire Dallas network protocol. [ 16.396025] w1_gpio: unknown parameter 'pullup' ignored [ 16.694464] Adding 102396k swap on /var/swap. Priority:-2 extents:2 across:897020k SSFS [ 17.348891] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 17.863288] random: crng init done [ 17.863308] random: 7 urandom warning(s) missed due to ratelimiting [ 18.461104] ------------[ cut here ]------------ [ 18.461654] WARNING: CPU: 3 PID: 190 at net/wireless/sme.c:1088 cfg80211_disconnected+0x554/0x5a0 [cfg80211] [ 18.461665] Modules linked in: w1_therm w1_gpio wire cn ip6table_filter ip6_tables xt_tcpudp xt_multiport iptable_filter xt_MASQUERADE xt_comment iptable_nat nf_nat binfmt_misc nf_conntrack nf_defrag_ipv4 spidev 8192cu sha256_generic libsha256 cfg80211 rfkill raspberrypi_hwmon i2c_bcm2835 spi_bcm2835 bcm2835_codec(C) bcm2835_v4l2(C) snd_bcm2835(C) bcm2835_isp(C) v4l2_mem2mem snd_pcm bcm2835_mmal_vchiq(C) videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops snd_timer videobuf2_v4l2 videobuf2_common snd vc_sm_cma(C) videodev mc uio_pdrv_genirq uio fixed i2c_bcm2708 i2c_dev ip_tables x_tables ipv6 nf_defrag_ipv6 [ 18.461865] CPU: 3 PID: 190 Comm: kworker/u8:2 Tainted: G C 5.4.45-v7+ #1321 [ 18.461870] Hardware name: BCM2835 [ 18.462142] Workqueue: cfg80211 cfg80211_event_work [cfg80211] [ 18.462155] Backtrace: [ 18.462180] [<8010d458>] (dump_backtrace) from [<8010d750>] (show_stack+0x20/0x24) [ 18.462192] r6:a7538000 r5:00000000 r4:80d93cb4 r3:ec2cdcc4 [ 18.462207] [<8010d730>] (show_stack) from [<808b09c4>] (dump_stack+0xe0/0x124) [ 18.462220] [<808b08e4>] (dump_stack) from [<8011fd24>] (warn+0xec/0x104) [ 18.462231] r8:00000440 r7:00000009 r6:7f2cf168 r5:00000000 r4:00000000 r3:ec2cdcc4 [ 18.462243] [<8011fc38>] (warn) from [<8011fdf4>] (warn_slowpath_fmt+0xb8/0xc0) [ 18.462255] r9:7f2cf168 r8:00000440 r7:7f2a48d0 r6:00000009 r5:00000000 r4:80d04f48 [ 18.462491] [<8011fd40>] (warn_slowpath_fmt) from [<7f2a48d0>] (cfg80211_disconnected+0x554/0x5a0 [cfg80211]) [ 18.462505] r9:00000000 r8:00000000 r7:a9b63424 r6:a9b63400 r5:a74c2800 r4:aa08c9c0 [ 18.462894] [<7f2a437c>] (cfg80211_disconnected [cfg80211]) from [<7f26fb3c>] (cfg80211_process_wdev_events+0x13c/0x160 [cfg80211]) [ 18.462906] r10:00000100 r9:00000122 r8:a9b6348c r7:a9b63424 r6:a9b63494 r5:a9b63400 [ 18.462912] r4:a998aa80 [ 18.463298] [<7f26fa00>] (cfg80211_process_wdev_events [cfg80211]) from [<7f26fba0>] (cfg80211_process_rdev_events+0x40/0x98 [cfg80211]) [ 18.463313] r10:00000000 r9:00000100 r8:00000000 r7:a893f600 r6:aa080400 r5:aa08cc60 [ 18.463318] r4:a9b63400 [ 18.463706] [<7f26fb60>] (cfg80211_process_rdev_events [cfg80211]) from [<7f2691b8>] (cfg80211_event_work+0x24/0x2c [cfg80211]) [ 18.463713] r5:a7a0ae80 r4:aa08c8e4 [ 18.463913] [<7f269194>] (cfg80211_event_work [cfg80211]) from [<8013bd28>] (process_one_work+0x17c/0x4b4) [ 18.463920] r4:aa08c8e4 r3:7f269194 [ 18.463933] [<8013bbac>] (process_one_work) from [<8013c590>] (worker_thread+0x54/0x5b4) [ 18.463944] r10:a7a0ae80 r9:a7538038 r8:80d03d00 r7:aa080418 r6:00000088 r5:a7a0ae94 [ 18.463949] r4:aa080400 [ 18.463961] [<8013c53c>] (worker_thread) from [<80142974>] (kthread+0x13c/0x168) [ 18.463973] r10:a9b9c9dc r9:aa2b7e74 r8:8013c53c r7:a7a0ae80 r6:00000000 r5:a76b9b00 [ 18.463978] r4:a9b9c9c0 [ 18.463989] [<80142838>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [ 18.463997] Exception stack(0xa7539fb0 to 0xa7539ff8) [ 18.464006] 9fa0: 00000000 00000000 00000000 00000000 [ 18.464015] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 18.464023] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 18.464034] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:80142838 [ 18.464039] r4:a76b9b00 r3:80104648 [ 18.464047] ---[ end trace 0f5cd67c4ea6d8ef ]--- [ 18.784959] can: controller area network core (rev 20170425 abi 9) [ 18.785185] NET: Registered protocol family 29 [ 18.809794] can: raw protocol (rev 20170425) [ 18.825967] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 [ 28.133718] tun: Universal TUN/TAP device driver, 1.6 [ 363.057673] ------------[ cut here ]------------ [ 363.058376] WARNING: CPU: 3 PID: 7 at net/wireless/sme.c:1088 __cfg80211_disconnected+0x554/0x5a0 [cfg80211] [ 363.058392] Modules linked in: tun can_raw can w1_therm w1_gpio wire cn ip6table_filter ip6_tables xt_tcpudp xt_multiport iptable_filter xt_MASQUERADE xt_comment iptable_nat nf_nat binfmt_misc nf_conntrack nf_defrag_ipv4 spidev 8192cu sha256_generic libsha256 cfg80211 rfkill raspberrypi_hwmon i2c_bcm2835 spi_bcm2835 bcm2835_codec(C) bcm2835_v4l2(C) snd_bcm2835(C) bcm2835_isp(C) v4l2_mem2mem snd_pcm bcm2835_mmal_vchiq(C) videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops snd_timer videobuf2_v4l2 videobuf2_common snd vc_sm_cma(C) videodev mc uio_pdrv_genirq uio fixed i2c_bcm2708 i2c_dev ip_tables x_tables ipv6 nf_defrag_ipv6 [ 363.058685] CPU: 3 PID: 7 Comm: kworker/u8:0 Tainted: G WC 5.4.45-v7+ #1321 [ 363.058691] Hardware name: BCM2835 [ 363.059061] Workqueue: cfg80211 cfg80211_event_work [cfg80211] [ 363.059071] Backtrace: [ 363.059103] [<8010d458>] (dump_backtrace) from [<8010d750>] (show_stack+0x20/0x24) [ 363.059120] r6:aa102000 r5:00000000 r4:80d93cb4 r3:ec2cdcc4 [ 363.059139] [<8010d730>] (show_stack) from [<808b09c4>] (dump_stack+0xe0/0x124) [ 363.059157] [<808b08e4>] (dump_stack) from [<8011fd24>] (warn+0xec/0x104) [ 363.059174] r8:00000440 r7:00000009 r6:7f2cf168 r5:00000000 r4:00000000 r3:ec2cdcc4 [ 363.059193] [<8011fc38>] (warn) from [<8011fdf4>] (warn_slowpath_fmt+0xb8/0xc0) [ 363.059209] r9:7f2cf168 r8:00000440 r7:7f2a48d0 r6:00000009 r5:00000000 r4:80d04f48 [ 363.059524] [<8011fd40>] (warn_slowpath_fmt) from [<7f2a48d0>] (cfg80211_disconnected+0x554/0x5a0 [cfg80211]) [ 363.059542] r9:00000000 r8:00000000 r7:a9b63424 r6:a9b63400 r5:a74c2800 r4:aa08c9c0 [ 363.060113] [<7f2a437c>] (__cfg80211_disconnected [cfg80211]) from [<7f26fb3c>] (cfg80211_process_wdev_events+0x13c/0x160 [cfg80211]) [ 363.060131] r10:00000100 r9:00000122 r8:a9b6348c r7:a9b63424 r6:a9b63494 r5:a9b63400 [ 363.060140] r4:9ae30380 [ 363.060705] [<7f26fa00>] (cfg80211_process_wdev_events [cfg80211]) from [<7f26fba0>] (cfg80211_process_rdev_events+0x40/0x98 [cfg80211]) [ 363.060722] r10:00000000 r9:00000100 r8:00000000 r7:a893f600 r6:aa080400 r5:aa08cc60 [ 363.060729] r4:a9b63400 [ 363.061293] [<7f26fb60>] (cfg80211_process_rdev_events [cfg80211]) from [<7f2691b8>] (cfg80211_event_work+0x24/0x2c [cfg80211]) [ 363.061304] r5:aa00b700 r4:aa08c8e4 [ 363.061598] [<7f269194>] (cfg80211_event_work [cfg80211]) from [<8013bd28>] (process_one_work+0x17c/0x4b4) [ 363.061609] r4:aa08c8e4 r3:7f269194 [ 363.061627] [<8013bbac>] (process_one_work) from [<8013c590>] (worker_thread+0x54/0x5b4) [ 363.061644] r10:aa00b700 r9:aa102038 r8:80d03d00 r7:aa080418 r6:00000088 r5:aa00b714 [ 363.061651] r4:aa080400 [ 363.061669] [<8013c53c>] (worker_thread) from [<80142974>] (kthread+0x13c/0x168) [ 363.061687] r10:aa0bc75c r9:aa0dbe44 r8:8013c53c r7:aa00b700 r6:00000000 r5:aa0bc600 [ 363.061694] r4:aa0bc740 [ 363.061711] [<80142838>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [ 363.061721] Exception stack(0xaa103fb0 to 0xaa103ff8) [ 363.061734] 3fa0: 00000000 00000000 00000000 00000000 [ 363.061748] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 363.061760] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 363.061776] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:80142838 [ 363.061785] r4:aa0bc600 r3:ffffffff [ 363.061796] ---[ end trace 0f5cd67c4ea6d8f0 ]---

pelwell commented 4 years ago

Both of those stack traces are warnings - does the WLAN dongle work afterwards?