Kernel panic, bcm2836_arm_irqchip_handle_irq with raspberrypi-kernel dated 2020723

Since installing the kernel of 20200723, almost each night, when my raspi receives btrfs snapshot backups from a remote server, it is having kernel panics. The problem doesn't occur with the next older kernel (20200717)

See screenshot below.

IMG_20200810_084915

System System Information

Raspberry Pi 3 Model B Rev 1.2\00 PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)"

Raspberry Pi reference 2016-02-26 Generated using Pi-gen, https://github.com/RPi-Distro/Pi-gen, stage4

Linux raspbian 5.4.51-v7+ #1327 SMP Thu Jul 23 10:58:46 BST 2020 armv7l GNU/Linux Revision : a02082 Serial : 00000000cdcc9893 Model : Raspberry Pi 3 Model B Rev 1.2 Throttled flag : throttled=0x0 Camera : supported=0 detected=0

Videocore information

alloc failures: 0 compactions: 0 legacy block fails: 0

Filesystem information

Dateisystem 1K-Blöcke Benutzt Verfügbar Verw% Eingehängt auf /dev/root 7344832 3159444 3854196 46% / devtmpfs 441236 0 441236 0% /dev tmpfs 474516 92 474424 1% /dev/shm tmpfs 474516 13464 461052 3% /run tmpfs 5120 4 5116 1% /run/lock tmpfs 474516 0 474516 0% /sys/fs/cgroup /dev/mmcblk0p1 258096 54460 203636 22% /boot /dev/sda1 5858423808 3966408376 1886047912 68% /var/backups /dev/sda1 5858423808 3966408376 1886047912 68% /var/log /dev/sda1 5858423808 3966408376 1886047912 68% /var/www /dev/sda1 5858423808 3966408376 1886047912 68% /root /dev/sda1 5858423808 3966408376 1886047912 68% /tmp /dev/sda1 5858423808 3966408376 1886047912 68% /var/lib/mysql /dev/sda1 5858423808 3966408376 1886047912 68% /var/cache /dev/sda1 5858423808 3966408376 1886047912 68% /home /dev/sda1 5858423808 3966408376 1886047912 68% /srv tmpfs 94900 0 94900 0% /run/user/0 tmpfs 94900 0 94900 0% /run/user/1000

Filename Type Size Used Priority /dev/sda2 partition 2097148 776 -2

Package version information

raspberrypi-ui-mods: Installiert: (keine) raspberrypi-sys-mods: Installiert: 20200514 openbox: Installiert: (keine) lxpanel: Installiert: (keine) pcmanfm: Installiert: (keine) rpd-plym-splash: Installiert: (keine)

Networking Information

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x inet6 fd09:c9bc:y::y.y.y.y prefixlen 128 scopeid 0x0 inet6 2003:d3:c718:y::y.y.y.y prefixlen 128 scopeid 0x0 inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0 inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0 inet6 y::y.y.y.y prefixlen 64 scopeid 0x20 ether m.m.m.m txqueuelen 1000 (Ethernet) RX packets 2629 bytes 276952 (270.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3181 bytes 1398678 (1.3 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet x.x.x.x netmask x.x.x.x inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Lokale Schleife) RX packets 788 bytes 852797 (832.8 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 788 bytes 852797 (832.8 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet x.x.x.x netmask x.x.x.x destination x.x.x.x inet6 y::y.y.y.y prefixlen 64 scopeid 0x20 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 502 bytes 67288 (65.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0 inet6 fd09:c9bc:y::y.y.y.y prefixlen 128 scopeid 0x0 inet6 2003:d3:c718:y::y.y.y.y prefixlen 128 scopeid 0x0 inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0 inet6 y::y.y.y.y prefixlen 64 scopeid 0x20 ether m.m.m.m txqueuelen 1000 (Ethernet) RX packets 1335 bytes 131910 (128.8 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 124 bytes 21922 (21.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

USB Information

/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M | Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M | Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M | Port 3: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M | Port 5: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 5: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M

config.txt

aphy_params_current=819 arm_freq=1200 audio_pwm_mode=514 config_hdmi_boost=5 core_freq=400 desired_osc_freq=0x387520 disable_commandline_tags=2 disable_l2cache=1 display_hdmi_rotate=-1 display_lcd_rotate=-1 dphy_params_current=547 enable_tvout=1 force_eeprom_read=1 force_pwm_open=1 framebuffer_ignore_alpha=1 framebuffer_swap=1 gpu_freq=300 init_uart_clock=0x2dc6c00 lcd_framerate=60 over_voltage_avs=0x2625a pause_burst_frames=1 program_serial_random=1 sdram_freq=450 total_mem=1024 hdmi_force_cec_address:0=65535 hdmi_force_cec_address:1=65535 hdmi_pixel_freq_limit:0=0x9a7ec80 device_tree=- overlay_prefix=overlays/ hdmi_cvt:0= hdmi_cvt:1= hdmi_edid_filename:0= hdmi_edid_filename:1= hdmi_timings:0= hdmi_timings:1=

cmdline.txt

coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1200 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=931cd833-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait

raspi-gpio settings

BANK0 (GPIO 0 to 27): GPIO 0: level=1 fsel=0 func=INPUT GPIO 1: level=1 fsel=0 func=INPUT GPIO 2: level=1 fsel=0 func=INPUT GPIO 3: level=1 fsel=0 func=INPUT GPIO 4: level=1 fsel=0 func=INPUT GPIO 5: level=1 fsel=0 func=INPUT GPIO 6: level=1 fsel=0 func=INPUT GPIO 7: level=1 fsel=0 func=INPUT GPIO 8: level=1 fsel=0 func=INPUT GPIO 9: level=0 fsel=0 func=INPUT GPIO 10: level=0 fsel=0 func=INPUT GPIO 11: level=0 fsel=0 func=INPUT GPIO 12: level=0 fsel=0 func=INPUT GPIO 13: level=0 fsel=0 func=INPUT GPIO 14: level=0 fsel=0 func=INPUT GPIO 15: level=1 fsel=0 func=INPUT GPIO 16: level=0 fsel=0 func=INPUT GPIO 17: level=0 fsel=0 func=INPUT GPIO 18: level=0 fsel=0 func=INPUT GPIO 19: level=0 fsel=0 func=INPUT GPIO 20: level=0 fsel=0 func=INPUT GPIO 21: level=0 fsel=0 func=INPUT GPIO 22: level=0 fsel=0 func=INPUT GPIO 23: level=0 fsel=0 func=INPUT GPIO 24: level=0 fsel=0 func=INPUT GPIO 25: level=0 fsel=0 func=INPUT GPIO 26: level=0 fsel=0 func=INPUT GPIO 27: level=0 fsel=0 func=INPUT BANK1 (GPIO 28 to 45): GPIO 28: level=0 fsel=0 func=INPUT GPIO 29: level=1 fsel=0 func=INPUT GPIO 30: level=0 fsel=0 func=INPUT GPIO 31: level=0 fsel=0 func=INPUT GPIO 32: level=1 fsel=7 alt=3 func=TXD0 GPIO 33: level=1 fsel=7 alt=3 func=RXD0 GPIO 34: level=1 fsel=7 alt=3 func=SD1_CLK GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 GPIO 40: level=0 fsel=4 alt=0 func=PWM0 GPIO 41: level=0 fsel=4 alt=0 func=PWM1 GPIO 42: level=1 fsel=4 alt=0 func=GPCLK1 GPIO 43: level=0 fsel=4 alt=0 func=GPCLK2 GPIO 44: level=1 fsel=0 func=INPUT GPIO 45: level=1 fsel=0 func=INPUT BANK2 (GPIO 46 to 53): GPIO 46: level=1 fsel=0 func=INPUT GPIO 47: level=1 fsel=1 func=OUTPUT GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0 GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1 GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2 GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3

vcdbg log messages

001516.329: brfs: File read: /mfs/sd/config.txt 001517.337: brfs: File read: 1735 bytes 001559.733: brfs: File read: /mfs/sd/config.txt 001560.642: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined 001572.533: brfs: File read: 1735 bytes 001763.592: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined 001764.834: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined 001764.890: *** Restart logging 001784.021: HDMI0: hdmi_pixel_encoding: 162000000 001789.274: dtb_file 'bcm2710-rpi-3-b.dtb' 001794.589: brfs: File read: /mfs/sd/bcm2710-rpi-3-b.dtb 001794.613: Loading 'bcm2710-rpi-3-b.dtb' to 0x100 size 0x6d2a 001834.227: brfs: File read: 27946 bytes 001854.150: brfs: File read: /mfs/sd/overlays/overlay_map.dtb 002040.180: brfs: File read: 1371 bytes 002045.648: brfs: File read: /mfs/sd/config.txt 002046.238: dtparam: audio=on 002095.047: brfs: File read: 1735 bytes 002097.401: brfs: File read: /mfs/sd/cmdline.txt 002097.455: Read command line from file 'cmdline.txt': 002097.477: 'dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=PARTUUID=931cd833-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait' 004235.833: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined 004404.177: brfs: File read: 142 bytes 004838.313: brfs: File read: /mfs/sd/kernel7.img 004838.338: Loading 'kernel7.img' to 0x8000 size 0x557138 004838.370: Device tree loaded to 0x2eff8e00 (size 0x7172) 004839.253: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined 007943.901: vchiq_core: vchiq_init_state: slot_zero = 0xf7580000, is_master = 1 007948.941: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead 007955.378: TV service:host side not connected, dropping notification 0x00000002, 0x00000002, 0x00000044

dmesg log

[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.51-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1327 SMP Thu Jul 23 10:58:46 BST 2020 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] Normal zone: 1896 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 242688 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s49792 r8192 d23936 u81920 [ 0.000000] pcpu-alloc: s49792 r8192 d23936 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240792 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1200 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=931cd833-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 882472K/970752K available (8192K kernel code, 681K rwdata, 2532K rodata, 1024K init, 824K bss, 22744K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 27966 entries in 55 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x328/0x4e8 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000022] Switching to timer-based delay loop, resolution 52ns [ 0.000292] Console: colour dummy device 80x30 [ 0.000877] printk: console [tty1] enabled [ 0.000943] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000992] pid_max: default: 32768 minimum: 301 [ 0.001337] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001384] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002575] CPU: Testing write buffer coherency: ok [ 0.003145] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004106] Setting up static identity map for 0x100000 - 0x10003c [ 0.004328] rcu: Hierarchical SRCU implementation. [ 0.005027] smp: Bringing up secondary CPUs ... [ 0.006163] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.007422] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.008577] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.008729] smp: Brought up 1 node, 4 CPUs [ 0.008817] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.008846] CPU: All CPU(s) started in HYP mode. [ 0.008870] CPU: Virtualization extensions available. [ 0.009831] devtmpfs: initialized [ 0.026212] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.026515] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.026571] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.029595] pinctrl core: initialized pinctrl subsystem [ 0.030834] NET: Registered protocol family 16 [ 0.035045] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.041345] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.041386] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.041642] Serial: AMBA PL011 UART driver [ 0.043594] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.060086] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-07-17 11:04, variant start [ 0.070100] raspberrypi-firmware soc:firmware: Firmware hash is 21a15cb094f41c7506ad65d2cb9b29c550693057 [ 0.121101] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.123290] SCSI subsystem initialized [ 0.123568] usbcore: registered new interface driver usbfs [ 0.123650] usbcore: registered new interface driver hub [ 0.123811] usbcore: registered new device driver usb [ 0.125817] clocksource: Switched to clocksource arch_sys_counter [ 1.283807] VFS: Disk quotas dquot_6.6.0 [ 1.283963] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.284166] FS-Cache: Loaded [ 1.284408] CacheFiles: Loaded [ 1.294024] thermal_sys: Registered thermal governor 'step_wise' [ 1.294412] NET: Registered protocol family 2 [ 1.295365] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.295434] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.295574] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.295785] TCP: Hash tables configured (established 8192 bind 8192) [ 1.296012] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.296086] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.296400] NET: Registered protocol family 1 [ 1.297283] RPC: Registered named UNIX socket transport module. [ 1.297314] RPC: Registered udp transport module. [ 1.297341] RPC: Registered tcp transport module. [ 1.297367] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.299122] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 1.302395] Initialise system trusted keyrings [ 1.302669] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.313122] FS-Cache: Netfs 'nfs' registered for caching [ 1.313883] NFS: Registering the id_resolver key type [ 1.313976] Key type id_resolver registered [ 1.314004] Key type id_legacy registered [ 1.314040] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.315346] Key type asymmetric registered [ 1.315376] Asymmetric key parser 'x509' registered [ 1.315454] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.315491] io scheduler mq-deadline registered [ 1.315518] io scheduler kyber registered [ 1.320565] bcm2708_fb soc:fb: FB found 1 display(s) [ 1.402254] Console: switching to colour frame buffer device 240x75 [ 1.440280] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1200 [ 1.445784] bcm2835-rng 3f104000.rng: hwrng registered [ 1.446486] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.447430] vc-sm: Videocore shared memory driver [ 1.448037] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 1.460109] brd: module loaded [ 1.472495] loop: module loaded [ 1.474016] Loading iSCSI transport class v2.0-870. [ 1.475111] libphy: Fixed MDIO Bus: probed [ 1.475358] usbcore: registered new interface driver lan78xx [ 1.475589] usbcore: registered new interface driver smsc95xx [ 1.475781] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.204254] Core Release: 2.80a [ 2.204368] Setting default values for core params [ 2.204545] Finished setting default values for core params [ 2.405074] Using Buffer DMA mode [ 2.405190] Periodic Transfer Interrupt Enhancement - disabled [ 2.405367] Multiprocessor Interrupt Enhancement - disabled [ 2.405538] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 2.405682] Dedicated Tx FIFOs mode [ 2.406484] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7504000 dma = 0xf7504000 len=9024 [ 2.406789] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 2.407399] dwc_otg: Microframe scheduler enabled [ 2.407471] WARN::hcd_init_fiq:457: FIQ on core 1 [ 2.407621] WARN::hcd_init_fiq:458: FIQ ASM at 806bdcbc length 36 [ 2.407805] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 2.407993] dwc_otg 3f980000.usb: DWC OTG Controller [ 2.408179] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 2.408432] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 2.408648] Init: Port Power? op_state=1 [ 2.408773] Init: Power Port (0) [ 2.409238] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.409487] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.409705] usb usb1: Product: DWC OTG Controller [ 2.409857] usb usb1: Manufacturer: Linux 5.4.51-v7+ dwc_otg_hcd [ 2.410041] usb usb1: SerialNumber: 3f980000.usb [ 2.410935] hub 1-0:1.0: USB hub found [ 2.420124] hub 1-0:1.0: 1 port detected [ 2.429900] dwc_otg: FIQ enabled [ 2.429910] dwc_otg: NAK holdoff enabled [ 2.429921] dwc_otg: FIQ split-transaction FSM enabled [ 2.429938] Module dwc_common_port init [ 2.430312] usbcore: registered new interface driver usb-storage [ 2.439580] mousedev: PS/2 mouse device common for all mice [ 2.449953] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 2.461106] sdhci: Secure Digital Host Controller Interface driver [ 2.470042] sdhci: Copyright(c) Pierre Ossman [ 2.479489] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [ 2.489060] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 2.498184] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.508967] ledtrig-cpu: registered to indicate activity on CPUs [ 2.518361] hidraw: raw HID events driver (C) Jiri Kosina [ 2.527646] usbcore: registered new interface driver usbhid [ 2.536744] usbhid: USB HID core driver [ 2.546986] vchiq: vchiq_init_state: slot_zero = (ptrval)

[ 2.568725] [vc_sm_connected_init]: end - returning 0 [ 2.579648] Initializing XFRM netlink socket [ 2.588526] NET: Registered protocol family 17 [ 2.597510] Key type dns_resolver registered [ 2.607034] Registering SWP/SWPB emulation handler [ 2.616232] registered taskstats version 1 [ 2.625036] Loading compiled-in X.509 certificates [ 2.634383] Key type ._fscrypt registered [ 2.643150] Key type .fscrypt registered [ 2.656064] Indeed it is in host mode hprt0 = 00021501 [ 2.662586] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 2.673699] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 2.684611] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 2.695174] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 2.704142] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 2.739629] sdhost: log_buf @ (ptrval) (f7507000) [ 2.750030] random: fast init done [ 2.784677] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 2.795131] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.805427] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.813970] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 2.825345] of_cfs_init [ 2.834115] of_cfs_init: OK [ 2.843535] Waiting for root device PARTUUID=931cd833-02... [ 2.853351] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.865871] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 2.874576] Indeed it is in host mode hprt0 = 00001101 [ 2.921929] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.934650] mmc0: new high speed SDHC card at address e624 [ 2.944483] mmcblk0: mmc0:e624 SU08G 7.40 GiB [ 2.960095] mmcblk0: p1 p2 [ 2.996986] mmc1: new high speed SDIO card at address 0001 [ 3.004113] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 3.014494] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 3.116216] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 3.125134] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.134765] hub 1-1:1.0: USB hub found [ 3.143634] hub 1-1:1.0: 5 ports detected [ 3.465863] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 3.596187] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 3.604979] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.616634] smsc95xx v1.0.6 [ 3.720295] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, m.m.m.m [ 3.724121] EXT4-fs (mmcblk0p2): recovery complete [ 3.743121] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.752452] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.772326] devtmpfs: mounted [ 3.788411] Freeing unused kernel memory: 1024K [ 3.798080] Run /sbin/init as init process [ 3.825874] usb 1-1.5: new low-speed USB device number 4 using dwc_otg [ 3.983965] usb 1-1.5: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00 [ 3.993533] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.003038] usb 1-1.5: Product: USB Keyboard [ 4.012452] usb 1-1.5: Manufacturer: Logitech [ 4.039985] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C31C.0001/input/input0 [ 4.116804] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3f980000.usb-1.5/input0 [ 4.155553] input: Logitech USB Keyboard Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C31C.0002/input/input1 [ 4.236173] input: Logitech USB Keyboard System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C31C.0002/input/input2 [ 4.247024] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3f980000.usb-1.5/input1 [ 4.541112] systemd[1]: System time before build time, advancing clock. [ 4.555887] usb 1-1.3: new high-speed USB device number 5 using dwc_otg [ 4.727517] usb 1-1.3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00 [ 4.737971] usb 1-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 4.748325] usb 1-1.3: Product: ASM1153E [ 4.758572] usb 1-1.3: Manufacturer: asmedia [ 4.768785] usb 1-1.3: SerialNumber: 0123456789012 [ 4.787496] NET: Registered protocol family 10 [ 4.799427] Segment Routing with IPv6 [ 4.799597] usb 1-1.3: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is [ 4.820413] usb 1-1.3: required by the UAS driver. Please try an other USB controller if you wish to use UAS. [ 4.831175] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 4.842391] usb-storage 1-1.3:1.0: Quirks match for vid 174c pid 55aa: 400000 [ 4.853545] scsi host0: usb-storage 1-1.3:1.0 [ 4.864286] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.888345] systemd[1]: Detected architecture arm. [ 5.026900] systemd[1]: Set hostname to . [ 5.412211] systemd-sysv-generator[101]: stat() failed on /etc/init.d/rcS, ignoring: No such file or directory [ 5.510947] systemd-sysv-generator[101]: stat() failed on /etc/init.d/rc, ignoring: No such file or directory [ 5.916946] scsi 0:0:0:0: Direct-Access asmedia ASM1153E 0 PQ: 0 ANSI: 6 [ 5.931218] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB) [ 5.938256] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly. [ 5.942911] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 5.968685] sd 0:0:0:0: [sda] Write Protect is off [ 5.980968] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 5.981779] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.024957] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly. [ 6.090266] sda: sda1 sda2 [ 6.106924] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.153923] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly. [ 6.385149] random: systemd: uninitialized urandom read (16 bytes read) [ 6.423123] random: systemd: uninitialized urandom read (16 bytes read) [ 6.437846] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.468499] random: systemd: uninitialized urandom read (16 bytes read) [ 6.491020] systemd[1]: Listening on Syslog Socket. [ 6.520923] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.551281] systemd[1]: Listening on udev Control Socket. [ 6.909891] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 6.947494] i2c /dev entries driver [ 7.660320] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 8.509771] mc: Linux media interface: v0.10 [ 8.556088] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 8.561898] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[ 8.576469] videodev: Linux video capture interface: v2.00 [ 8.576690] [vc_sm_connected_init]: installed successfully [ 8.622757] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.622762] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.622766] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.644452] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 8.652580] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 8.664891] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 8.669491] bcm2835_audio bcm2835_audio: card created with 4 channels [ 8.676013] bcm2835_audio bcm2835_audio: card created with 4 channels [ 8.681092] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 8.688562] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 8.689106] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 8.689578] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 8.701026] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 8.701084] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 8.701868] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 8.701905] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 8.701928] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 8.701948] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 8.701966] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 8.702340] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 8.715709] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 8.715784] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 8.736997] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 8.737052] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 9.074179] usbcore: registered new interface driver uas [ 9.129230] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.210955] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.287578] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.413295] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 9.426172] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 9.426546] usbcore: registered new interface driver brcmfmac [ 9.451394] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt failed with error -2 [ 9.697523] random: crng init done [ 9.697539] random: 7 urandom warning(s) missed due to ratelimiting [ 9.702076] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 9.702249] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 9.707162] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd [ 9.975978] raid6: neonx8 gen() 658 MB/s [ 10.145906] raid6: neonx8 xor() 551 MB/s [ 10.315933] raid6: neonx4 gen() 726 MB/s [ 10.485871] raid6: neonx4 xor() 664 MB/s [ 10.655932] raid6: neonx2 gen() 532 MB/s [ 10.825899] raid6: neonx2 xor() 564 MB/s [ 10.995891] raid6: neonx1 gen() 320 MB/s [ 11.165854] raid6: neonx1 xor() 383 MB/s [ 11.335963] raid6: int32x8 gen() 155 MB/s [ 11.506048] raid6: int32x8 xor() 109 MB/s [ 11.676211] raid6: int32x4 gen() 151 MB/s [ 11.846043] raid6: int32x4 xor() 113 MB/s [ 12.016020] raid6: int32x2 gen() 132 MB/s [ 12.186029] raid6: int32x2 xor() 102 MB/s [ 12.355825] raid6: int32x1 gen() 89 MB/s [ 12.525925] raid6: int32x1 xor() 85 MB/s [ 12.525937] raid6: using algorithm neonx4 gen() 726 MB/s [ 12.525947] raid6: .... xor() 664 MB/s, rmw enabled [ 12.525960] raid6: using neon recovery algorithm [ 12.588875] xor: measuring software checksum speed [ 12.685823] arm4regs : 1018.400 MB/sec [ 12.785811] 8regs : 684.400 MB/sec [ 12.885810] 32regs : 636.400 MB/sec [ 12.985808] neon : 1087.600 MB/sec [ 12.985820] xor: using function: neon (1087.600 MB/sec) [ 12.995663] Adding 2097148k swap on /dev/sda2. Priority:-2 extents:1 across:2097148k FS [ 13.259199] Btrfs loaded, crc32c=crc32c-generic [ 13.262057] BTRFS: device label WD-RED devid 1 transid 1008279 /dev/sda1 [ 13.687927] BTRFS info (device sda1): disk space caching is enabled [ 13.687948] BTRFS info (device sda1): has skinny extents [ 40.432707] systemd-journald[116]: Received request to flush runtime journal from PID 1 [ 41.746019] uart-pl011 3f201000.serial: no DMA platform data [ 41.839232] 8021q: 802.1Q VLAN Support v1.8 [ 43.586544] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 44.338442] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 45.494387] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 45.800787] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 46.097430] Bluetooth: Core ver 2.22 [ 46.097543] NET: Registered protocol family 31 [ 46.097553] Bluetooth: HCI device and connection manager initialized [ 46.097586] Bluetooth: HCI socket layer initialized [ 46.097604] Bluetooth: L2CAP socket layer initialized [ 46.097635] Bluetooth: SCO socket layer initialized [ 46.111882] Bluetooth: HCI UART driver ver 2.3 [ 46.111906] Bluetooth: HCI UART protocol H4 registered [ 46.112055] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 46.112373] Bluetooth: HCI UART protocol Broadcom registered [ 46.615484] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 46.615512] Bluetooth: BNEP filters: protocol multicast [ 46.615552] Bluetooth: BNEP socket layer initialized [ 46.962929] ICMPv6: process dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead [ 53.054846] NFSD: Using UMH upcall client tracking operations. [ 53.054870] NFSD: starting 90-second grace period (net f00004c1) [ 53.085964] tun: Universal TUN/TAP device driver, 1.6 **Logs** If applicable, add the relevant output fromdmesg` or similar.

raspberrypi / linux