search

raspberrypi / linux

Kernel source tree for Raspberry Pi-provided kernel builds. Issues unrelated to the linux kernel should be posted on the community forum at https://forums.raspberrypi.com/
Other
11.12k stars 4.98k forks source link

Cannot enable. Maybe the USB cable is bad? #4031

Open luckyer opened 3 years ago

luckyer commented 3 years ago

Describe the bug I am currently want to usb a FT230X on my raspberrypi, and i got the following errors [ 237.460134] usb 1-1.3: new high-speed USB device number 23 using xhci_hcd [ 238.410762] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad? [ 239.320708] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad? [ 239.321211] usb 1-1-port3: attempt power cycle [ 240.580713] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad? [ 241.490802] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad? [ 241.491352] usb 1-1-port3: unable to enumerate USB device

This problem happeds everytime when i plug in the usb, and this is the kernel version i use now pi@asiair:~ $ uname -r 4.19.66-v7l+ What i am using is PI4 b

And more logs is here [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.66-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1253 SMP Thu Aug 15 12:02:08 BST 2019 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000 [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632 [ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=DC:A6:32:46:64:15 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=b52378d8-02 rootfstype=ext4 elevator=deadline fsck.repair=no rootwait fastboot noswap ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 3735592K/4050944K available (8192K kernel code, 661K rwdata, 2348K rodata, 2048K init, 850K bss, 53208K reserved, 262144K cma-reserved, 3264512K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (10208 kB) .init : 0x(ptrval) - 0x(ptrval) (2048 kB) .data : 0x(ptrval) - 0x(ptrval) ( 662 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 851 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 28118 entries in 83 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000022] Switching to timer-based delay loop, resolution 18ns [ 0.000246] Console: colour dummy device 80x30 [ 0.000709] console [tty1] enabled [ 0.000760] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.000803] pid_max: default: 32768 minimum: 301 [ 0.001079] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001112] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001876] CPU: Testing write buffer coherency: ok [ 0.002298] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002948] Setting up static identity map for 0x200000 - 0x20003c [ 0.003121] rcu: Hierarchical SRCU implementation. [ 0.003999] smp: Bringing up secondary CPUs ... [ 0.004814] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005740] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006630] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006763] smp: Brought up 1 node, 4 CPUs [ 0.006831] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.006854] CPU: All CPU(s) started in HYP mode. [ 0.006874] CPU: Virtualization extensions available. [ 0.007662] devtmpfs: initialized [ 0.017979] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.018212] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.018255] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.025568] pinctrl core: initialized pinctrl subsystem [ 0.026430] NET: Registered protocol family 16 [ 0.029343] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.030848] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.030881] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.031084] Serial: AMBA PL011 UART driver [ 0.034113] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.069935] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.072369] vgaarb: loaded [ 0.072746] SCSI subsystem initialized [ 0.072947] usbcore: registered new interface driver usbfs [ 0.073021] usbcore: registered new interface driver hub [ 0.073132] usbcore: registered new device driver usb [ 0.090404] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-15 12:03, variant start [ 0.100112] raspberrypi-firmware soc:firmware: Firmware hash is 9f8431fb7839c7f00f52b81f5822ddab2b31d0db [ 0.111645] clocksource: Switched to clocksource arch_sys_counter [ 0.189193] VFS: Disk quotas dquot_6.6.0 [ 0.189292] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.189487] FS-Cache: Loaded [ 0.189678] CacheFiles: Loaded [ 0.190200] simple-framebuffer: probe of 0.framebuffer failed with error -12 [ 0.199361] NET: Registered protocol family 2 [ 0.200024] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.200077] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.200163] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.200247] TCP: Hash tables configured (established 8192 bind 8192) [ 0.200382] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.200427] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.200734] NET: Registered protocol family 1 [ 0.201284] RPC: Registered named UNIX socket transport module. [ 0.201310] RPC: Registered udp transport module. [ 0.201331] RPC: Registered tcp transport module. [ 0.201353] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.201380] PCI: CLS 0 bytes, default 64 [ 0.204424] Initialise system trusted keyrings [ 0.204600] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 0.213536] FS-Cache: Netfs 'nfs' registered for caching [ 0.214051] NFS: Registering the id_resolver key type [ 0.214098] Key type id_resolver registered [ 0.214120] Key type id_legacy registered [ 0.214151] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.216385] Key type asymmetric registered [ 0.216412] Asymmetric key parser 'x509' registered [ 0.216533] bounce: pool size: 64 pages [ 0.216585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.216767] io scheduler noop registered [ 0.216791] io scheduler deadline registered (default) [ 0.216969] io scheduler cfq registered [ 0.216992] io scheduler mq-deadline registered (default) [ 0.217015] io scheduler kyber registered [ 0.245786] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000 [ 0.245834] brcm-pcie fd500000.pcie: could not get clock [ 0.245910] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.245963] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000 [ 0.301678] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC) [ 0.301954] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.301985] pci_bus 0000:00: root bus resource [bus 00-01] [ 0.302015] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 0.302078] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 0.302214] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.304949] PCI: bus0: Fast back to back transfers disabled [ 0.305170] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.305294] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.305611] pci 0000:01:00.0: PME# supported from D0 D3cold [ 0.308349] PCI: bus1: Fast back to back transfers disabled [ 0.308423] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 0.308457] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 0.308547] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.308577] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.308801] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 0.308984] pcieport 0000:00:00.0: Signaling PME with IRQ 56 [ 0.309163] pcieport 0000:00:00.0: AER enabled with IRQ 56 [ 0.309345] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 0.312666] iproc-rng200 fe104000.rng: hwrng registered [ 0.312903] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.313427] vc-sm: Videocore shared memory driver [ 0.313830] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 0.323778] brd: module loaded [ 0.333369] loop: module loaded [ 0.334117] Loading iSCSI transport class v2.0-870. [ 0.335809] libphy: Fixed MDIO Bus: probed [ 0.336239] bcmgenet fd580000.genet: failed to get enet clock [ 0.336270] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000 [ 0.336301] bcmgenet fd580000.genet: failed to get enet-wol clock [ 0.336331] bcmgenet fd580000.genet: failed to get enet-eee clock [ 0.336367] bcmgenet: Skipping UMAC reset [ 0.336604] unimac-mdio unimac-mdio.-19: DMA mask not set [ 0.351677] libphy: bcmgenet MII bus: probed [ 0.392168] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval) [ 0.393066] usbcore: registered new interface driver r8152 [ 0.393142] usbcore: registered new interface driver lan78xx [ 0.393221] usbcore: registered new interface driver smsc95xx [ 0.393533] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.393578] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.395804] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890 [ 0.396129] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 57 [ 0.397006] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.397042] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.397071] usb usb1: Product: xHCI Host Controller [ 0.397095] usb usb1: Manufacturer: Linux 4.19.66-v7l+ xhci-hcd [ 0.397119] usb usb1: SerialNumber: 0000:01:00.0 [ 0.397656] hub 1-0:1.0: USB hub found [ 0.397749] hub 1-0:1.0: 1 port detected [ 0.398225] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.398261] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.398300] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 0.398716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 0.398749] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.398777] usb usb2: Product: xHCI Host Controller [ 0.398800] usb usb2: Manufacturer: Linux 4.19.66-v7l+ xhci-hcd [ 0.398824] usb usb2: SerialNumber: 0000:01:00.0 [ 0.399313] hub 2-0:1.0: USB hub found [ 0.399386] hub 2-0:1.0: 4 ports detected [ 0.400583] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.426168] dwc_otg fe980000.usb: base=(ptrval) [ 0.626490] Core Release: 2.80a [ 0.626525] Setting default values for core params [ 0.626566] Finished setting default values for core params [ 0.826923] Using Buffer DMA mode [ 0.826947] Periodic Transfer Interrupt Enhancement - disabled [ 0.826970] Multiprocessor Interrupt Enhancement - disabled [ 0.826993] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.827062] Dedicated Tx FIFOs mode [ 0.827678] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = ded34000 dma = 0x00000000ded34000 len=9024 [ 0.827724] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.827782] dwc_otg: Microframe scheduler enabled [ 0.827846] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.827877] WARN::hcd_init_fiq:458: FIQ ASM at c07b5a8c length 36 [ 0.827906] WARN::hcd_init_fiq:497: MPHI regs_base at f0810200 [ 0.827953] dwc_otg fe980000.usb: DWC OTG Controller [ 0.827997] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3 [ 0.828048] dwc_otg fe980000.usb: irq 37, io mem 0x00000000 [ 0.828112] Init: Port Power? op_state=1 [ 0.828133] Init: Power Port (0) [ 0.828401] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.828434] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.828463] usb usb3: Product: DWC OTG Controller [ 0.828487] usb usb3: Manufacturer: Linux 4.19.66-v7l+ dwc_otg_hcd [ 0.828511] usb usb3: SerialNumber: fe980000.usb [ 0.829035] hub 3-0:1.0: USB hub found [ 0.829096] hub 3-0:1.0: 1 port detected [ 0.829697] dwc_otg: FIQ enabled [ 0.829706] dwc_otg: NAK holdoff enabled [ 0.829715] dwc_otg: FIQ split-transaction FSM enabled [ 0.829728] Module dwc_common_port init [ 0.829948] usbcore: registered new interface driver uas [ 0.830078] usbcore: registered new interface driver usb-storage [ 0.830254] mousedev: PS/2 mouse device common for all mice [ 0.831433] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.831676] bcm2835-cpufreq: min=600000 max=1500000 [ 0.832280] sdhci: Secure Digital Host Controller Interface driver [ 0.832305] sdhci: Copyright(c) Pierre Ossman [ 0.832705] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 0.833097] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.836070] ledtrig-cpu: registered to indicate activity on CPUs [ 0.836237] hidraw: raw HID events driver (C) Jiri Kosina [ 0.836373] usbcore: registered new interface driver usbhid [ 0.836396] usbhid: USB HID core driver [ 0.837155] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0

[ 0.846804] [vc_sm_connected_init]: end - returning 0 [ 0.847880] Initializing XFRM netlink socket [ 0.847922] NET: Registered protocol family 17 [ 0.848011] Key type dns_resolver registered [ 0.848405] Registering SWP/SWPB emulation handler [ 0.849001] registered taskstats version 1 [ 0.849031] Loading compiled-in X.509 certificates [ 0.856743] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 0.856827] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2 [ 0.859775] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 0.860301] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver [ 0.860924] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 0.860951] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 0.884810] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1 [ 0.904097] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.905722] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.907344] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.910303] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.911926] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.920902] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 0.923411] of_cfs_init [ 0.923512] of_cfs_init: OK [ 0.924103] Waiting for root device PARTUUID=b52378d8-02... [ 0.969242] random: fast init done [ 0.971684] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 0.984582] mmc1: new high speed SDIO card at address 0001 [ 1.023771] mmc0: new ultra high speed DDR50 SDHC card at address 0001 [ 1.024886] mmcblk0: mmc0:0001 EB1QT 29.8 GiB [ 1.025993] mmcblk0: p1 p2 p3 p4 [ 1.043443] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 1.043478] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 1.154357] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 [ 1.154398] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.154427] usb 1-1: Product: USB2.0 Hub [ 1.156168] hub 1-1:1.0: USB hub found [ 1.156536] hub 1-1:1.0: 4 ports detected [ 2.582792] EXT4-fs (mmcblk0p2): recovery complete [ 2.629267] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.629343] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.635020] devtmpfs: mounted [ 2.641319] Freeing unused kernel memory: 2048K [ 2.641579] Run /sbin/init as init process [ 3.035799] systemd[1]: System time before build time, advancing clock. [ 3.109283] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.109995] systemd[1]: Detected architecture arm. [ 3.124285] systemd[1]: Set hostname to . [ 3.132102] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 3.383847] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.383908] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.564949] random: systemd: uninitialized urandom read (16 bytes read) [ 3.668876] random: systemd: uninitialized urandom read (16 bytes read) [ 3.669674] systemd[1]: Listening on Journal Socket. [ 3.670456] random: systemd: uninitialized urandom read (16 bytes read) [ 3.670990] systemd[1]: Listening on udev Control Socket. [ 3.680851] systemd[1]: Starting Set the console keyboard layout... [ 3.682677] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.889672] i2c /dev entries driver [ 4.165252] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.402785] systemd-journald[104]: Received request to flush runtime journal from PID 1 [ 4.713849] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff [ 4.717231] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff [ 4.718521] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff [ 4.721076] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff [ 4.745242] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 4.747674] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[ 4.752187] [vc_sm_connected_init]: installed successfully [ 4.755330] media: Linux media interface: v0.10 [ 4.774986] videodev: Linux video capture interface: v2.00 [ 4.821137] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 4.840373] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 4.845992] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 4.887227] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 4.887241] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 4.901738] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 4.901752] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 4.918926] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 4.918942] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 5.240746] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.250384] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 5.323246] [drm] No displays found. Consider forcing hotplug if HDMI is attached [ 5.323343] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [ 5.323901] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1 [ 5.323912] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.323921] [drm] No driver support for vblank timestamp query. [ 5.323931] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL [ 5.329005] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.382425] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 5.392972] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.393656] usbcore: registered new interface driver brcmfmac [ 5.659457] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.672728] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 [ 6.087751] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 6.442412] EXT4-fs (mmcblk0p3): recovery complete [ 6.464300] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 7.440432] random: crng init done [ 7.440447] random: 7 urandom warning(s) missed due to ratelimiting [ 7.554734] 8021q: 802.1Q VLAN Support v1.8 [ 7.758281] bcmgenet: Skipping UMAC reset [ 7.851893] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay) [ 7.880447] brcmfmac: power management disabled [ 8.871752] bcmgenet fd580000.genet eth0: Link is Down [ 9.051131] brcmfmac: power management disabled [ 9.103456] brcmfmac: power management disabled [ 13.031785] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 16.055838] Adding 2097148k swap on /dev/mmcblk0p4. Priority:-2 extents:1 across:2097148k SSFS [ 155.380068] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad? [ 156.290171] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad? [ 156.290686] usb 1-1-port3: attempt power cycle [ 157.550381] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad? [ 158.480463] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad? [ 158.481027] usb 1-1-port3: unable to enumerate USB device

luckyer commented 3 years ago

Plus , i use the same usb cable on my ubuntu, it work fine . So , anyone have ideas? tks

popcornmix commented 3 years ago

pi@asiair:~ $ uname -r 4.19.66-v7l+

That's very old. Can you update and test again? You should be on a 5.4 kernel.