Raspberry Pi 4B 8G, Blank Sceen, Invalid EDID on 5.10.33 but not on 5.10.27

[SteveFosdick]

Is this the right place for my bug report? I suspect this is a Linux kernel bug because the bug is seen with a later version of the kernel (5.10.33) and not with an earlier one (5.10.27)

Describe the bug The HDMI output is initially driven with a signal my TV can understand but this ceases - the TV complains of no signal - when I would expect the login prompt to appear. There is a message in the system log about the EDID being invalid.

To reproduce This issue does seem to depend on both the kernel version and on the particular TV/monitor connected. For me, I attached a Celcus brand TV to the first HDMI port, selected the HDMI input from within the TV's input menu and turn on the Raspberry Pi having previously updated to linux 5.10.33-1-ARCH (inux-raspberrypi4-5.10.33-1).

Expected behaviour I expected the Raspberry Pi to complete the boot process and present a login prompt in a virtual console.

Actual behaviour An early boot screen briefly flashed on the screen, followed by the rainbow pattern, then the screen with four raspberries at the top and the kernel and systemd messages appeared. Once the boot processed seemed almost complete the TV complained "No HDMI signal". Tapping keys on the keyboard did not cause the TV to see an HDMI signal.

System Copy and paste the results of the raspinfo command in to this section. Alternatively, copy and paste a pastebin link, or add answers to the following questions:

• Which model of Raspberry Pi? e.g. Pi3B+, PiZeroW Pi 4B 8Gb.
• Which OS and version (cat /etc/rpi-issue)? Arch Linux ARM aarch64
• Which firmware version (vcgencmd version)? Apr 30 2021 15:54:12 Copyright (c) 2012 Broadcom version 3e104c5ed69dc796755b7195973a8d00482d76dd (clean) (release) (start)
• Which kernel version (uname -a)?

Logs Apr 16 16:12:03 alarm systemd[1]: Starting Create Volatile Files and Directories... Apr 16 16:12:03 alarm systemd-udevd[242]: cfg80211: Process '/usr/bin/set-wireless-regdom' failed with exit code > Apr 16 16:12:03 alarm kernel: Bluetooth: Core ver 2.22 Apr 16 16:12:03 alarm kernel: [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 Apr 16 16:12:03 alarm kernel: NET: Registered protocol family 31 Apr 16 16:12:03 alarm kernel: Bluetooth: HCI device and connection manager initialized Apr 16 16:12:03 alarm kernel: Bluetooth: HCI socket layer initialized Apr 16 16:12:03 alarm kernel: Bluetooth: L2CAP socket layer initialized Apr 16 16:12:03 alarm kernel: Bluetooth: SCO socket layer initialized Apr 16 16:12:03 alarm kernel: vc4-drm gpu: [drm] HDMI-A-1: EDID is invalid: Apr 16 16:12:03 alarm kernel: [00] BAD 00 ff ff ff ff ff ff 00 3c ad 00 37 00 00 00 00 Apr 16 16:12:03 alarm kernel: [00] BAD 0a 12 01 03 80 10 09 78 0a 68 37 a4 54 48 9a 25 Apr 16 16:12:03 alarm kernel: [00] BAD 0c 4a 4c 3f ef 80 d1 00 d1 c0 81 19 90 59 01 01 Apr 16 16:12:03 alarm kernel: [00] BAD 01 01 01 01 01 01 01 1d 80 18 71 1c 16 20 58 2c Apr 16 16:12:03 alarm kernel: [00] BAD 25 00 10 09 00 00 00 9e 01 1d 00 72 51 d0 1e 20 Apr 16 16:12:03 alarm kernel: [00] BAD 6e 28 55 00 10 09 00 00 00 1e 00 00 00 fc 00 32 Apr 16 16:12:03 alarm kernel: [00] BAD 32 57 5f 4c 43 44 5f 54 56 0a 20 20 00 00 00 fd Apr 16 16:12:03 alarm kernel: [00] BAD 00 31 3d 0f 2e 08 00 0a 20 20 20 20 20 20 01 2c Apr 16 16:12:03 alarm systemd[1]: Finished Create Volatile Files and Directories.

Additional context As mentioned earlier, this problem does not exist with the same TV but kernel version 5.10.27. When booting with 5.10.27 the message about about invalid EDID is not in the journal and the login prompt appears as expected.

Because this is TV/monitor specific I have attached the EDID file for the TV which has the problem and the decoded version (from edid-decode) is: edid-decode (hex):

00 ff ff ff ff ff ff 00 3c ad 00 37 00 00 00 00 0a 12 01 03 80 10 09 78 0a 68 37 a4 54 48 9a 25 0c 4a 4c 3f ef 80 d1 00 d1 c0 81 19 90 59 01 01 01 01 01 01 01 01 01 1d 80 18 71 1c 16 20 58 2c 25 00 10 09 00 00 00 9e 01 1d 00 72 51 d0 1e 20 6e 28 55 00 10 09 00 00 00 1e 00 00 00 fc 00 32 32 57 5f 4c 43 44 5f 54 56 0a 20 20 00 00 00 fd 00 31 3d 0f 2e 08 00 0a 20 20 20 20 20 20 01 2c

02 03 24 71 50 01 02 04 85 06 11 13 14 15 03 07 12 16 1f 20 10 23 09 07 01 83 01 00 00 66 03 0c 00 10 00 80 8c 0a d0 8a 20 e0 2d 10 10 3e 96 00 04 03 00 00 00 18 8c 0a a0 14 51 f0 16 00 26 7c 43 00 04 03 00 00 00 99 01 1d 80 d0 72 1c 16 20 10 2c 25 80 10 09 00 00 00 9f 01 1d 00 bc 52 d0 1e 20 b8 28 55 40 10 09 00 00 00 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f2

---

Block 0, Base EDID: EDID Structure Version & Revision: 1.3 Vendor & Product Identification: Manufacturer: OEM Model: 14080 Made in: week 10 of 2008 Basic Display Parameters & Features: Digital display Maximum image size: 16 cm x 9 cm Gamma: 2.20 RGB color display First detailed timing is the preferred timing Color Characteristics: Red : 0.6416, 0.3300 Green: 0.2832, 0.6015 Blue : 0.1445, 0.0498 White: 0.2900, 0.2998 Established Timings I & II: DMT 0x04: 640x480 59.940 Hz 4:3 31.469 kHz 25.175 MHz Apple : 640x480 66.667 Hz 4:3 35.000 kHz 30.240 MHz DMT 0x05: 640x480 72.809 Hz 4:3 37.861 kHz 31.500 MHz DMT 0x06: 640x480 75.000 Hz 4:3 37.500 kHz 31.500 MHz DMT 0x08: 800x600 56.250 Hz 4:3 35.156 kHz 36.000 MHz DMT 0x09: 800x600 60.317 Hz 4:3 37.879 kHz 40.000 MHz DMT 0x0a: 800x600 72.188 Hz 4:3 48.077 kHz 50.000 MHz DMT 0x0b: 800x600 75.000 Hz 4:3 46.875 kHz 49.500 MHz Apple : 832x624 74.551 Hz 4:3 49.726 kHz 57.284 MHz DMT 0x10: 1024x768 60.004 Hz 4:3 48.363 kHz 65.000 MHz DMT 0x11: 1024x768 70.069 Hz 4:3 56.476 kHz 75.000 MHz DMT 0x12: 1024x768 75.029 Hz 4:3 60.023 kHz 78.750 MHz DMT 0x24: 1280x1024 75.025 Hz 5:4 79.976 kHz 135.000 MHz Apple : 1152x870 75.062 Hz 192:145 68.681 kHz 100.000 MHz Standard Timings: DMT 0x45: 1920x1200 59.885 Hz 16:10 74.556 kHz 193.250 MHz DMT 0x52: 1920x1080 60.000 Hz 16:9 67.500 kHz 148.500 MHz DMT 0x1e: 1280x800 84.880 Hz 16:10 71.554 kHz 122.500 MHz DMT 0x2c: 1400x1050 84.960 Hz 4:3 93.881 kHz 179.500 MHz Detailed Timing Descriptors: DTD 1: 1920x1080i 60.000 Hz 16:9 33.750 kHz 74.250 MHz (16 mm x 9 mm) Hfront 88 Hsync 44 Hback 148 Hpol P Vfront 2 Vsync 5 Vback 15 Vpol P Vfront +0.5 Odd Field Vfront 2 Vsync 5 Vback 15 Vpol P Vback +0.5 Even Field DTD 2: 1280x720 60.000 Hz 16:9 45.000 kHz 74.250 MHz (16 mm x 9 mm) Hfront 110 Hsync 40 Hback 220 Hpol P Vfront 5 Vsync 5 Vback 20 Vpol P Display Product Name: '22W_LCD_TV' Display Range Limits: Monitor ranges (GTF): 49-61 Hz V, 15-46 kHz H, max dotclock 80 MHz Extension blocks: 1 Checksum: 0x2c (should be 0x2f)

---

Block 1, CTA-861 Extension Block: Revision: 3 Basic audio support Supports YCbCr 4:4:4 Supports YCbCr 4:2:2 Native detailed modes: 1 Video Data Block: VIC 1: 640x480 59.940 Hz 4:3 31.469 kHz 25.175 MHz VIC 2: 720x480 59.940 Hz 4:3 31.469 kHz 27.000 MHz VIC 4: 1280x720 60.000 Hz 16:9 45.000 kHz 74.250 MHz VIC 5: 1920x1080i 60.000 Hz 16:9 33.750 kHz 74.250 MHz (native) VIC 6: 1440x480i 59.940 Hz 4:3 15.734 kHz 27.000 MHz VIC 17: 720x576 50.000 Hz 4:3 31.250 kHz 27.000 MHz VIC 19: 1280x720 50.000 Hz 16:9 37.500 kHz 74.250 MHz VIC 20: 1920x1080i 50.000 Hz 16:9 28.125 kHz 74.250 MHz VIC 21: 1440x576i 50.000 Hz 4:3 15.625 kHz 27.000 MHz VIC 3: 720x480 59.940 Hz 16:9 31.469 kHz 27.000 MHz VIC 7: 1440x480i 59.940 Hz 16:9 15.734 kHz 27.000 MHz VIC 18: 720x576 50.000 Hz 16:9 31.250 kHz 27.000 MHz VIC 22: 1440x576i 50.000 Hz 16:9 15.625 kHz 27.000 MHz VIC 31: 1920x1080 50.000 Hz 16:9 56.250 kHz 148.500 MHz VIC 32: 1920x1080 24.000 Hz 16:9 27.000 kHz 74.250 MHz VIC 16: 1920x1080 60.000 Hz 16:9 67.500 kHz 148.500 MHz Audio Data Block: Linear PCM: Max channels: 2 Supported sample rates (kHz): 48 44.1 32 Supported sample sizes (bits): 16 Speaker Allocation Data Block: FL/FR - Front Left/Right Vendor-Specific Data Block (HDMI), OUI 00-0C-03: Source physical address: 1.0.0.0 Supports_AI Detailed Timing Descriptors: DTD 3: 720x480 59.940 Hz 3:2 31.469 kHz 27.000 MHz (4 mm x 3 mm) Hfront 16 Hsync 62 Hback 60 Hpol N Vfront 9 Vsync 6 Vback 30 Vpol N DTD 4: 1440x480i 59.940 Hz 3:1 15.734 kHz 27.000 MHz (4 mm x 3 mm) Hfront 38 Hsync 124 Hback 114 Hpol N Vfront 4 Vsync 3 Vback 15 Vpol N Vfront +0.5 Odd Field Vfront 4 Vsync 3 Vback 15 Vpol N Vback +0.5 Even Field DTD 5: 1920x1080i 50.000 Hz 16:9 28.125 kHz 74.250 MHz (16 mm x 9 mm) Hfront 528 Hsync 44 Hback 148 Hpol P Vfront 2 Vsync 5 Vback 15 Vpol P Vfront +0.5 Odd Field Vfront 2 Vsync 5 Vback 15 Vpol P Vback +0.5 Even Field DTD 6: 1280x720 50.000 Hz 16:9 37.500 kHz 74.250 MHz (16 mm x 9 mm) Hfront 440 Hsync 40 Hback 220 Hpol P Vfront 5 Vsync 5 Vback 20 Vpol P Checksum: 0xf2 edid.gz

[user13571113]

Is this the right place for my bug report? As reported by SteveFosdick, I have no HDMI output with Xorg following the kernel upgrade 5.10.27 -> 5.10.31 on ArchLinuxARM 64bit.

Describe the bug With the 5.10.27-4 kernel (and any prior version), I can boot up my Raspberrpi 4B 8G, see the boot log on my screen (cf. "Additional context" below for the screen model information), log in, run startx, and enter a working LXQt environment.

With the 5.10.31-5 kernel (and any future version), I can boot up my Raspberrpi 4B 8G, see the boot log on my screen, log in, but when running startx, my screen goes blank saying "No HDMI input signal". This also occurs when I enable a display manager (e.g., LightDM).

To reproduce

[alarm@alarm]$ cat /boot/config.txt
# See /boot/overlays/README for all available options

over_voltage=5
arm_freq=2000

dtoverlay=vc4-kms-v3d
disable_overscan=1

initramfs initramfs-linux.img followkernel

Use an up-to-date ArchlinuxARM image, install xorg-server, xorg-xinit, xf86-video-fbdev, and any desktop environment; create an appropriate ".xinitrc" file (mine contains exec startlxqt); connect the screen to the HDMI 0 input, power on the device, log in, and run startx.

Expected behaviour A working X session displayed on my screen.

Actual behaviour For a brief moment, I see the startup messages of the X server, then the screen goes blank and displays "No HDMI input signal". The X server, however, is running and I can switch TTYs; via CTRL+ALT+F5, I return to the console (displayed properly on the screen) and run pkill Xorg. No errors are reported in the Xorg log file (see logs below). Thus I suspect that the problem lies with the vc4 driver and not with the X server (note also that many commits were made to vc4 driver during the 5.10.27 -> 5.10.31 transition.)

System

• Which model of Raspberry Pi? Pi4B 8G
• Which OS and version? ArchLinux ARM 64bit running this kernel (https://archlinuxarm.org/packages/aarch64/linux-raspberrypi4)
• Which firmware version (vcgencmd version)? Apr 30 2021 15:54:12 Copyright (c) 2012 Broadcom version 3e104c5ed69dc796755b7195973a8d00482d76dd (clean) (release) (start)
• Which kernel version (uname -a)? 5.10.35-1 (corresponds to https://github.com/raspberrypi/linux/archive/53a5ac4935c500d32bfc465551cc5107e091c09c.tar.gz)

Logs Working X session with kernel 5.10.27-4 (see logs of the failing session below):

dmesg:

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 5.10.27-4-ARCH (builduser@leming) (aarch64-unknown-linux-gnu-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP PREEMPT Fri Apr 16 15:57:09 MDT 2021
[    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001e800000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] On node 0 totalpages: 2015232
[    0.000000]   DMA zone: 3072 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 196608 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 12288 pages used for memmap
[    0.000000]   DMA32 zone: 770048 pages, LIFO batch:63
[    0.000000]   Normal zone: 16384 pages used for memmap
[    0.000000]   Normal zone: 1048576 pages, LIFO batch:63
[    0.000000] percpu: Embedded 32 pages/cpu s90904 r8192 d31976 u131072
[    0.000000] pcpu-alloc: s90904 r8192 d31976 u131072 alloc=32*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1983488
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:720x480M@60 smsc95xx.macaddr=DC:A6:32:CD:12:8B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x000000001a800000-0x000000001e800000] (64MB)
[    0.000000] Memory: 7544720K/8060928K available (11582K kernel code, 1822K rwdata, 4104K rodata, 2432K init, 1207K bss, 254064K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
[    0.000000] random: get_random_bytes called from start_kernel+0x3d0/0x590 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000238] Console: colour dummy device 80x25
[    0.000627] printk: console [tty1] enabled
[    0.000674] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000704] pid_max: default: 32768 minimum: 301
[    0.001054] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.001174] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.002284] Disabling memory control group subsystem
[    0.003835] rcu: Hierarchical SRCU implementation.
[    0.005106] smp: Bringing up secondary CPUs ...
[    0.005830] Detected PIPT I-cache on CPU1
[    0.005906] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.006738] Detected PIPT I-cache on CPU2
[    0.006783] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.007564] Detected PIPT I-cache on CPU3
[    0.007609] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.007729] smp: Brought up 1 node, 4 CPUs
[    0.007801] SMP: Total of 4 processors activated.
[    0.007818] CPU features: detected: 32-bit EL0 Support
[    0.007836] CPU features: detected: CRC32 instructions
[    0.007854] CPU features: detected: 32-bit EL1 Support
[    0.031683] CPU: All CPU(s) started at EL2
[    0.031752] alternatives: patching kernel code
[    0.033559] devtmpfs: initialized
[    0.042790] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.042847] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.049613] pinctrl core: initialized pinctrl subsystem
[    0.050628] NET: Registered protocol family 16
[    0.052825] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.053087] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.053685] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.053775] audit: initializing netlink subsys (disabled)
[    0.054077] audit: type=2000 audit(0.052:1): state=initialized audit_enabled=0 res=1
[    0.054555] thermal_sys: Registered thermal governor 'step_wise'
[    0.054904] cpuidle: using governor menu
[    0.055315] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.055459] ASID allocator initialised with 65536 entries
[    0.055570] Serial: AMBA PL011 UART driver
[    0.077186] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.084440] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T15:54:12, variant start
[    0.088449] raspberrypi-firmware soc:firmware: Firmware hash is 3e104c5ed69dc796755b7195973a8d00482d76dd
[    0.117619] cryptd: max_cpu_qlen set to 1000
[    0.188679] raid6: neonx8   gen()  1728 MB/s
[    0.256793] raid6: neonx8   xor()  1228 MB/s
[    0.324905] raid6: neonx4   gen()  1816 MB/s
[    0.393009] raid6: neonx4   xor()  1275 MB/s
[    0.461132] raid6: neonx2   gen()  1573 MB/s
[    0.529244] raid6: neonx2   xor()  1181 MB/s
[    0.597368] raid6: neonx1   gen()  1178 MB/s
[    0.665466] raid6: neonx1   xor()   919 MB/s
[    0.733584] raid6: int64x8  gen()  1015 MB/s
[    0.801690] raid6: int64x8  xor()   560 MB/s
[    0.869854] raid6: int64x4  gen()  1038 MB/s
[    0.937909] raid6: int64x4  xor()   567 MB/s
[    1.006008] raid6: int64x2  gen()   960 MB/s
[    1.074114] raid6: int64x2  xor()   509 MB/s
[    1.142206] raid6: int64x1  gen()   732 MB/s
[    1.210304] raid6: int64x1  xor()   378 MB/s
[    1.210321] raid6: using algorithm neonx4 gen() 1816 MB/s
[    1.210335] raid6: .... xor() 1275 MB/s, rmw enabled
[    1.210351] raid6: using neon recovery algorithm
[    1.210929] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    1.213239] iommu: Default domain type: Translated 
[    1.213434] vgaarb: loaded
[    1.213908] SCSI subsystem initialized
[    1.214101] usbcore: registered new interface driver usbfs
[    1.214161] usbcore: registered new interface driver hub
[    1.214216] usbcore: registered new device driver usb
[    1.215949] clocksource: Switched to clocksource arch_sys_counter
[    2.195225] VFS: Disk quotas dquot_6.6.0
[    2.195332] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.195500] FS-Cache: Loaded
[    2.195706] CacheFiles: Loaded
[    2.196407] simple-framebuffer 3eaa9000.framebuffer: framebuffer at 0x3eaa9000, 0x151800 bytes, mapped to 0x(____ptrval____)
[    2.196437] simple-framebuffer 3eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880
[    2.198658] Console: switching to colour frame buffer device 90x30
[    2.201375] simple-framebuffer 3eaa9000.framebuffer: fb0: simplefb registered!
[    2.209556] NET: Registered protocol family 2
[    2.211294] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    2.213447] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    2.214992] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    2.216912] TCP: Hash tables configured (established 65536 bind 65536)
[    2.218320] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    2.219563] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    2.221102] NET: Registered protocol family 1
[    2.222972] RPC: Registered named UNIX socket transport module.
[    2.224141] RPC: Registered udp transport module.
[    2.225255] RPC: Registered tcp transport module.
[    2.226367] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.227507] NET: Registered protocol family 44
[    2.228647] PCI: CLS 0 bytes, default 64
[    2.229947] Trying to unpack rootfs image as initramfs...
[    2.683358] Freeing initrd memory: 6940K
[    2.686162] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    2.688682] kvm [1]: IPA Size Limit: 44 bits
[    2.690804] kvm [1]: vgic interrupt IRQ9
[    2.692146] kvm [1]: Hyp mode initialized successfully
[    2.694478] Initialise system trusted keyrings
[    2.695804] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    2.702462] zbud: loaded
[    2.704983] FS-Cache: Netfs 'nfs' registered for caching
[    2.706559] NFS: Registering the id_resolver key type
[    2.707569] Key type id_resolver registered
[    2.708535] Key type id_legacy registered
[    2.709542] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.710483] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    2.776005] xor: measuring software checksum speed
[    2.780867]    8regs           :  2523 MB/sec
[    2.785172]    32regs          :  2903 MB/sec
[    2.790231]    arm64_neon      :  2362 MB/sec
[    2.791100] xor: using function: 32regs (2903 MB/sec)
[    2.792014] async_tx: api initialized (async)
[    2.792913] Key type asymmetric registered
[    2.793798] Asymmetric key parser 'x509' registered
[    2.794735] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    2.795843] io scheduler mq-deadline registered
[    2.796790] io scheduler kyber registered
[    2.797792] io scheduler bfq registered
[    2.801508] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    2.802425] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    2.804255] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    2.806151] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[    2.874029] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    2.875242] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    2.876276] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.877306] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    2.879354] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    2.880486] pci 0000:00:00.0: PME# supported from D0 D3hot
[    2.885242] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    2.886368] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    2.887695] pci 0000:01:00.0: PME# supported from D0 D3hot
[    2.892304] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    2.893383] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    2.894493] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.895541] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    2.896817] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    2.897999] pcieport 0000:00:00.0: PME: Signaling with IRQ 65
[    2.899369] pcieport 0000:00:00.0: AER: enabled with IRQ 65
[    2.905502] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    2.908353] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    2.909727] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    2.919972] brd: module loaded
[    2.932070] loop: module loaded
[    2.934230] Loading iSCSI transport class v2.0-870.
[    2.937858] libphy: Fixed MDIO Bus: probed
[    2.939645] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    2.951962] libphy: bcmgenet MII bus: probed
[    3.008036] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    3.009966] usbcore: registered new interface driver r8152
[    3.010999] usbcore: registered new interface driver lan78xx
[    3.012079] usbcore: registered new interface driver smsc95xx
[    3.061026] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    3.061975] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    3.063514] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
[    3.066423] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.068430] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.069482] usb usb1: Product: xHCI Host Controller
[    3.070510] usb usb1: Manufacturer: Linux 5.10.27-4-ARCH xhci-hcd
[    3.071558] usb usb1: SerialNumber: 0000:01:00.0
[    3.073148] hub 1-0:1.0: USB hub found
[    3.074240] hub 1-0:1.0: 1 port detected
[    3.075674] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    3.076700] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    3.077671] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    3.078884] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    3.080842] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.081883] usb usb2: Product: xHCI Host Controller
[    3.082902] usb usb2: Manufacturer: Linux 5.10.27-4-ARCH xhci-hcd
[    3.083926] usb usb2: SerialNumber: 0000:01:00.0
[    3.085428] hub 2-0:1.0: USB hub found
[    3.086488] hub 2-0:1.0: 4 ports detected
[    3.088761] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    3.089944] dwc_otg: FIQ enabled
[    3.089951] dwc_otg: NAK holdoff enabled
[    3.089957] dwc_otg: FIQ split-transaction FSM enabled
[    3.089967] Module dwc_common_port init
[    3.090399] usbcore: registered new interface driver uas
[    3.091500] usbcore: registered new interface driver usb-storage
[    3.092911] mousedev: PS/2 mouse device common for all mice
[    3.095143] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    3.096611] device-mapper: uevent: version 1.0.3
[    3.097827] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    3.100031] device-mapper: multipath round-robin: version 1.2.0 loaded
[    3.101013] device-mapper: multipath queue-length: version 0.2.0 loaded
[    3.101982] device-mapper: multipath service-time: version 0.3.0 loaded
[    3.102939] device-mapper: raid: Loading target version 1.15.1
[    3.106808] sdhci: Secure Digital Host Controller Interface driver
[    3.107815] sdhci: Copyright(c) Pierre Ossman
[    3.109293] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    3.110620] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
[    3.111645] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.114100] ledtrig-cpu: registered to indicate activity on CPUs
[    3.114635] hid: raw HID events driver (C) Jiri Kosina
[    3.115118] usbcore: registered new interface driver usbhid
[    3.115524] usbhid: USB HID core driver
[    3.118225] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    3.118739] [vc_sm_connected_init]: start
[    3.125717] [vc_sm_connected_init]: installed successfully
[    3.126331] Initializing XFRM netlink socket
[    3.126788] NET: Registered protocol family 17
[    3.127366] Key type dns_resolver registered
[    3.128069] registered taskstats version 1
[    3.128530] Loading compiled-in X.509 certificates
[    3.129148] Key type ._fscrypt registered
[    3.129591] Key type .fscrypt registered
[    3.130013] Key type fscrypt-provisioning registered
[    3.137267] Key type encrypted registered
[    3.142401] uart-pl011 fe201000.serial: there is not valid maps for state default
[    3.143035] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    3.143596] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 23, base_baud = 0) is a PL011 rev2
[    3.150495] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    3.151273] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    3.151765] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    3.180197] of_cfs_init
[    3.181268] of_cfs_init: OK
[    3.199540] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.201865] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.204010] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.207335] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.209418] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.212851] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    3.215792] Freeing unused kernel memory: 2432K
[    3.216513] Run /init as init process
[    3.216986]   with arguments:
[    3.216989]     /init
[    3.216992]   with environment:
[    3.216996]     HOME=/
[    3.216999]     TERM=linux
[    3.217002]     selinux=0
[    3.217005]     kgdboc=ttyS0,115200
[    3.238225] random: fast init done
[    3.276138] mmc1: new high speed SDIO card at address 0001
[    3.318601] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
[    3.320383] mmcblk0: mmc0:aaaa SR128 119 GiB
[    3.322720]  mmcblk0: p1 p2
[    3.407967] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.558665] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    3.560313] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.561138] usb 1-1: Product: USB2.0 Hub
[    3.563638] hub 1-1:1.0: USB hub found
[    3.564705] hub 1-1:1.0: 4 ports detected
[    3.720085] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.867991] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[    4.006209] usb 1-1.1: New USB device found, idVendor=045e, idProduct=0811, bcdDevice= 1.14
[    4.007586] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.008451] usb 1-1.1: Product: Microsoft\xc2\xae LifeCam Studio(TM)
[    4.009183] usb 1-1.1: Manufacturer: Microsoft
[    4.017639] hid-generic 0003:045E:0811.0001: hiddev96,hidraw0: USB HID v1.01 Device [Microsoft Microsoft\xc2\xae LifeCam Studio(TM)] on usb-0000:01:00.0-1.1/input4
[    4.100012] usb 1-1.3: new low-speed USB device number 4 using xhci_hcd
[    4.134296] systemd[1]: System time before build time, advancing clock.
[    4.203611] NET: Registered protocol family 10
[    4.228875] Segment Routing with IPv6
[    4.229648] usb 1-1.3: New USB device found, idVendor=046a, idProduct=0023, bcdDevice= 2.20
[    4.231108] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.259538] systemd[1]: systemd 248-5-arch running in system mode. (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    4.263577] systemd[1]: Detected architecture arm64.
[    4.269460] systemd[1]: Hostname set to <alarm>.
[    4.343987] usb 1-1.4: new low-speed USB device number 5 using xhci_hcd
[    4.456122] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c040, bcdDevice=24.30
[    4.457773] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.458810] usb 1-1.4: Product: USB-PS/2 Optical Mouse
[    4.459674] usb 1-1.4: Manufacturer: Logitech
[    4.469852] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C040.0004/input/input0
[    4.472279] hid-generic 0003:046D:C040.0004: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:01:00.0-1.4/input0
[    4.582110] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    4.863528] systemd[1]: Queued start job for default target Graphical Interface.
[    4.866089] random: systemd: uninitialized urandom read (16 bytes read)
[    4.868710] systemd[1]: Created slice system-getty.slice.
[    4.871371] random: systemd: uninitialized urandom read (16 bytes read)
[    4.873300] systemd[1]: Created slice system-modprobe.slice.
[    4.875671] systemd[1]: Created slice User and Session Slice.
[    4.876936] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.878200] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.879701] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.881593] systemd[1]: Reached target Local Encrypted Volumes.
[    4.882923] systemd[1]: Reached target Paths.
[    4.884144] systemd[1]: Reached target Remote File Systems.
[    4.885335] systemd[1]: Reached target Slices.
[    4.886476] systemd[1]: Reached target Swap.
[    4.887570] systemd[1]: Reached target Local Verity Integrity Protected Volumes.
[    4.888840] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.890147] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.893856] systemd[1]: Listening on Process Core Dump Socket.
[    4.895319] systemd[1]: Listening on Journal Audit Socket.
[    4.896614] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.897813] systemd[1]: Listening on Journal Socket.
[    4.898998] systemd[1]: Listening on Network Service Netlink Socket.
[    4.900218] systemd[1]: Listening on udev Control Socket.
[    4.901309] systemd[1]: Listening on udev Kernel Socket.
[    4.902462] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    4.904696] systemd[1]: Mounting POSIX Message Queue File System...
[    4.907597] systemd[1]: Mounting Kernel Debug File System...
[    4.910604] systemd[1]: Mounting Kernel Trace File System...
[    4.916968] systemd[1]: Mounting Temporary Directory (/tmp)...
[    4.920518] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.924575] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.929307] systemd[1]: Starting Load Kernel Module configfs...
[    4.933828] systemd[1]: Starting Load Kernel Module drm...
[    4.938245] systemd[1]: Starting Load Kernel Module fuse...
[    4.942465] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.949741] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[    4.951918] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.953490] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    4.956030] systemd[1]: Starting Apply Kernel Variables...
[    4.958907] systemd[1]: Starting Coldplug All udev Devices...
[    4.963500] systemd[1]: Mounted POSIX Message Queue File System.
[    4.965122] systemd[1]: Mounted Kernel Debug File System.
[    4.966397] systemd[1]: Mounted Kernel Trace File System.
[    4.967767] systemd[1]: Mounted Temporary Directory (/tmp).
[    4.969902] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    4.974106] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.975749] systemd[1]: Finished Load Kernel Module configfs.
[    4.981680] systemd[1]: Mounting Kernel Configuration File System...
[    4.982249] fuse: init (API version 7.32)
[    4.989014] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.989953] systemd[1]: Finished Load Kernel Module fuse.
[    4.992914] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.993736] systemd[1]: Finished Load Kernel Module drm.
[    4.995334] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.997104] systemd[1]: Mounted Kernel Configuration File System.
[    4.999840] systemd[1]: Mounting FUSE Control File System...
[    5.001579] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    5.004347] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    5.007488] systemd[1]: Starting Load/Save Random Seed...
[    5.010661] systemd[1]: Starting Create System Users...
[    5.014484] systemd[1]: Mounted FUSE Control File System.
[    5.023810] systemd[1]: Finished Apply Kernel Variables.
[    5.092824] systemd[1]: Finished Coldplug All udev Devices.
[    5.114869] systemd[1]: Finished Create System Users.
[    5.120138] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.190285] systemd[1]: Finished Create Static Device Nodes in /dev.
[    5.194259] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[    5.199556] systemd[1]: Starting Journal Service...
[    5.204278] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    5.266133] systemd[1]: Started Journal Service.
[    5.267748] audit: type=1130 audit(1618585922.127:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.293545] systemd-journald[221]: Received client request to flush runtime journal.
[    5.310575] systemd-journald[221]: File /var/log/journal/ccede7f130114362b1224b3c95052443/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    5.500637] audit: type=1130 audit(1618585922.363:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.503211] audit: type=1334 audit(1618585922.363:4): prog-id=10 op=LOAD
[    5.635736] random: crng init done
[    5.636527] random: 7 urandom warning(s) missed due to ratelimiting
[    5.727554] audit: type=1130 audit(1618585922.587:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.762877] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[    5.764833] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[    5.766545] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[    5.768262] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[    5.786323] iproc-rng200 fe104000.rng: hwrng registered
[    5.812777] brcmstb-i2c fef04500.i2c:  @97500hz registered in polling mode
[    5.814197] brcmstb-i2c fef09500.i2c:  @97500hz registered in polling mode
[    5.834127] audit: type=1130 audit(1618585922.695:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.841908] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[    5.843537] bcmgenet fd580000.ethernet eth0: Link is Down
[    5.857743] mc: Linux media interface: v0.10
[    5.877068] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[    5.898407] videodev: Linux video capture interface: v2.00
[    5.972771] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.972774] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.980840] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.996316] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.998765] input: HID 046a:0023 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046A:0023.0002/input/input1
[    6.002990] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    6.009064] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    6.010025] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    6.012551] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    6.017111] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    6.018602] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    6.019735] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    6.020711] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    6.021406] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    6.022312] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    6.022953] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    6.023669] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    6.030149] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    6.030795] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    6.034954] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    6.035837] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    6.043525] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    6.044581] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    6.060355] uvcvideo: Found UVC 1.00 device Microsoft\xc2\xae LifeCam Studio(TM) (045e:0811)
[    6.060433] cherry 0003:046A:0023.0002: input,hidraw2: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:01:00.0-1.3/input0
[    6.064569] input: HID 046a:0023 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046A:0023.0003/input/input2
[    6.084229] brcmfmac: F1 signature read @0x18000000=0x15264345
[    6.088270] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    6.089951] usbcore: registered new interface driver brcmfmac
[    6.100065] Registered IR keymap rc-cec
[    6.100805] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[    6.101647] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input3
[    6.128393] cherry 0003:046A:0023.0003: input,hidraw3: USB HID v1.11 Device [HID 046a:0023] on usb-0000:01:00.0-1.3/input1
[    6.128888] debugfs: Directory 'fef00700.hdmi' with parent 'vc4-hdmi-0' already present!
[    6.139978] input: Microsoft\xc2\xae LifeCam Studio(TM): as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
[    6.140049] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[    6.142724] usbcore: registered new interface driver uvcvideo
[    6.143573] USB Video Class driver (1.1.1)
[    6.162815] Registered IR keymap rc-cec
[    6.163718] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[    6.165195] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input5
[    6.166726] debugfs: Directory 'fef05700.hdmi' with parent 'vc4-hdmi-1' already present!
[    6.174857] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[    6.176332] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    6.177354] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[    6.179415] Bluetooth: Core ver 2.22
[    6.179797] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[    6.180725] NET: Registered protocol family 31
[    6.181304] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[    6.182632] Bluetooth: HCI device and connection manager initialized
[    6.182734] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[    6.184156] Bluetooth: HCI socket layer initialized
[    6.184163] Bluetooth: L2CAP socket layer initialized
[    6.184178] Bluetooth: SCO socket layer initialized
[    6.187222] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[    6.188618] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[    6.189442] checking generic (3eaa9000 151800) vs hw (0 ffffffffffffffff)
[    6.189447] fb0: switching to vc4drmfb from simple
[    6.190339] Console: switching to colour dummy device 80x25
[    6.200252] audit: type=1130 audit(1618585923.059:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.213717] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[    6.285551] Console: switching to colour frame buffer device 90x30
[    6.303087] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[    6.337593] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    6.345167] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Sep 18 2020 02:27:58 version 7.45.221 (3a6d3a0 CY) FWID 01-bbd9282b
[    6.377883] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    6.382059] audit: type=1130 audit(1618585923.243:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.514714] usbcore: registered new interface driver snd-usb-audio
[    6.617677] audit: type=1130 audit(1618585923.479:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.676693] audit: type=1130 audit(1618585923.539:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.724371] audit: type=1130 audit(1618585923.587:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.920220] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    9.920364] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.391791] kauditd_printk_skb: 23 callbacks suppressed
[   11.391800] audit: type=1131 audit(1620420071.399:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.181334] audit: type=1100 audit(1620420076.191:36): pid=331 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="alarm" exe="/usr/bin/login" hostname=alarm addr=? terminal=/dev/tty1 res=success'
[   16.193138] audit: type=1101 audit(1620420076.203:37): pid=331 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="alarm" exe="/usr/bin/login" hostname=alarm addr=? terminal=/dev/tty1 res=success'
[   16.196513] audit: type=1103 audit(1620420076.207:38): pid=331 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="alarm" exe="/usr/bin/login" hostname=alarm addr=? terminal=/dev/tty1 res=success'
[   16.196694] audit: type=1006 audit(1620420076.207:39): pid=331 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   16.243147] audit: type=1130 audit(1620420076.251:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.257082] audit: type=1101 audit(1620420076.267:41): pid=348 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="alarm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.258789] audit: type=1103 audit(1620420076.267:42): pid=348 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="alarm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   16.261433] audit: type=1006 audit(1620420076.267:43): pid=348 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   16.263250] audit: type=1105 audit(1620420076.275:44): pid=348 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="alarm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.467767] kauditd_printk_skb: 2 callbacks suppressed
[   16.467778] audit: type=1130 audit(1620420076.475:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.482444] audit: type=1105 audit(1620420076.491:48): pid=331 uid=0 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="alarm" exe="/usr/bin/login" hostname=alarm addr=? terminal=/dev/tty1 res=success'
[   16.485251] audit: type=1110 audit(1620420076.491:49): pid=331 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="alarm" exe="/usr/bin/login" hostname=alarm addr=? terminal=/dev/tty1 res=success'
[   18.019650] audit: type=1131 audit(1620420078.027:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.373406] audit: type=1131 audit(1620420097.383:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.480059] audit: type=1334 audit(1620420097.491:52): prog-id=19 op=UNLOAD
[   37.480138] audit: type=1334 audit(1620420097.491:53): prog-id=18 op=UNLOAD
[   37.480195] audit: type=1334 audit(1620420097.491:54): prog-id=17 op=UNLOAD

Xorg.0.log

[    77.869] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    77.870] 
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[    77.870] Build Operating System: Linux Archlinux
[    77.870] Current Operating System: Linux alarm 5.10.27-4-ARCH #1 SMP PREEMPT Fri Apr 16 15:57:09 MDT 2021 aarch64
[    77.870] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:720x480M@60 smsc95xx.macaddr=DC:A6:32:CD:12:8B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200
[    77.871] Build Date: 13 April 2021  09:16:13PM
[    77.871]  
[    77.871] Current version of pixman: 0.40.0
[    77.871]    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    77.871] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    77.874] (==) Log file: "/home/alarm/.local/share/xorg/Xorg.0.log", Time: Fri May  7 22:42:17 2021
[    77.883] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    77.884] (==) No Layout section.  Using the first Screen section.
[    77.884] (==) No screen section available. Using defaults.
[    77.884] (**) |-->Screen "Default Screen Section" (0)
[    77.884] (**) |   |-->Monitor "<default monitor>"
[    77.885] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    77.885] (==) Automatically adding devices
[    77.885] (==) Automatically enabling devices
[    77.885] (==) Automatically adding GPU devices
[    77.885] (==) Automatically binding GPU devices
[    77.885] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    77.885] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    77.885]    Entry deleted from font path.
[    77.886] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[    77.886]    Entry deleted from font path.
[    77.886]    (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[    77.886] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    77.886]    Entry deleted from font path.
[    77.886] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    77.886]    Entry deleted from font path.
[    77.886] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    77.886]    Entry deleted from font path.
[    77.886] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    77.886]    Entry deleted from font path.
[    77.886] (==) FontPath set to:

[    77.886] (==) ModulePath set to "/usr/lib/xorg/modules"
[    77.886] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    77.889] (II) Module ABI versions:
[    77.889]    X.Org ANSI C Emulation: 0.4
[    77.889]    X.Org Video Driver: 24.1
[    77.889]    X.Org XInput driver : 24.1
[    77.889]    X.Org Server Extension : 10.0
[    77.890] (++) using VT number 1

[    77.895] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    77.897] (II) xfree86: Adding drm device (/dev/dri/card1)
[    77.899] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[    77.899] (II) xfree86: Adding drm device (/dev/dri/card0)
[    77.901] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[    77.902] (II) no primary bus or device found
[    77.902]    falling back to /sys/devices/platform/gpu/drm/card1
[    77.902] (II) LoadModule: "glx"
[    77.905] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    77.962] (II) Module glx: vendor="X.Org Foundation"
[    77.962]    compiled for 1.20.11, module version = 1.0.0
[    77.962]    ABI class: X.Org Server Extension, version 10.0
[    77.962] (==) Matched modesetting as autoconfigured driver 0
[    77.962] (==) Matched fbdev as autoconfigured driver 1
[    77.962] (==) Assigned the driver to the xf86ConfigLayout
[    77.962] (II) LoadModule: "modesetting"
[    77.963] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    77.974] (II) Module modesetting: vendor="X.Org Foundation"
[    77.974]    compiled for 1.20.11, module version = 1.20.11
[    77.974]    Module class: X.Org Video Driver
[    77.974]    ABI class: X.Org Video Driver, version 24.1
[    77.974] (II) LoadModule: "fbdev"
[    77.974] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    77.976] (II) Module fbdev: vendor="X.Org Foundation"
[    77.976]    compiled for 1.20.8, module version = 0.5.0
[    77.976]    Module class: X.Org Video Driver
[    77.976]    ABI class: X.Org Video Driver, version 24.1
[    77.976] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    77.976] (II) FBDEV: driver for framebuffer: fbdev
[    77.976] (II) modeset(0): using drv /dev/dri/card1
[    77.976] (WW) Falling back to old probe method for fbdev
[    77.976] (II) Loading sub module "fbdevhw"
[    77.976] (II) LoadModule: "fbdevhw"
[    77.977] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    77.978] (II) Module fbdevhw: vendor="X.Org Foundation"
[    77.978]    compiled for 1.20.11, module version = 0.0.2
[    77.978]    ABI class: X.Org Video Driver, version 24.1
[    77.979] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    77.979] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    77.979] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    77.979] (==) modeset(0): RGB weight 888
[    77.979] (==) modeset(0): Default visual is TrueColor
[    77.979] (II) Loading sub module "glamoregl"
[    77.979] (II) LoadModule: "glamoregl"
[    77.979] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    78.013] (II) Module glamoregl: vendor="X.Org Foundation"
[    78.013]    compiled for 1.20.11, module version = 1.0.1
[    78.013]    ABI class: X.Org ANSI C Emulation, version 0.4
[    79.302] (II) modeset(0): glamor X acceleration enabled on V3D 4.2
[    79.302] (II) modeset(0): glamor initialized
[    79.329] (II) modeset(0): Output HDMI-1 has no monitor section
[    79.330] (II) modeset(0): Output HDMI-2 has no monitor section
[    79.356] (II) modeset(0): EDID for output HDMI-1
[    79.356] (II) modeset(0): Manufacturer: ACI  Model: 27a3  Serial#: 171793
[    79.356] (II) modeset(0): Year: 2014  Week: 14
[    79.356] (II) modeset(0): EDID Version: 1.3
[    79.356] (II) modeset(0): Digital Display Input
[    79.356] (II) modeset(0): Max Image Size [cm]: horiz.: 60  vert.: 34
[    79.356] (II) modeset(0): Gamma: 2.20
[    79.356] (II) modeset(0): DPMS capabilities: Off
[    79.356] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    79.356] (II) modeset(0): First detailed timing is preferred mode
[    79.356] (II) modeset(0): redX: 0.666 redY: 0.330   greenX: 0.310 greenY: 0.630
[    79.356] (II) modeset(0): blueX: 0.150 blueY: 0.040   whiteX: 0.313 whiteY: 0.329
[    79.356] (II) modeset(0): Supported established timings:
[    79.356] (II) modeset(0): 720x400@70Hz
[    79.356] (II) modeset(0): 640x480@60Hz
[    79.356] (II) modeset(0): 640x480@67Hz
[    79.356] (II) modeset(0): 640x480@75Hz
[    79.356] (II) modeset(0): 800x600@56Hz
[    79.356] (II) modeset(0): 800x600@60Hz
[    79.356] (II) modeset(0): 800x600@72Hz
[    79.356] (II) modeset(0): 800x600@75Hz
[    79.356] (II) modeset(0): 832x624@75Hz
[    79.356] (II) modeset(0): 1024x768@60Hz
[    79.356] (II) modeset(0): 1024x768@70Hz
[    79.356] (II) modeset(0): 1024x768@75Hz
[    79.356] (II) modeset(0): 1280x1024@75Hz
[    79.356] (II) modeset(0): Manufacturer's mask: 0
[    79.356] (II) modeset(0): Supported standard timings:
[    79.356] (II) modeset(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    79.356] (II) modeset(0): #1: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    79.356] (II) modeset(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    79.356] (II) modeset(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    79.356] (II) modeset(0): #4: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    79.356] (II) modeset(0): #5: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    79.356] (II) modeset(0): #6: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    79.356] (II) modeset(0): #7: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    79.356] (II) modeset(0): Supported detailed timing:
[    79.356] (II) modeset(0): clock: 241.5 MHz   Image Size:  597 x 336 mm
[    79.356] (II) modeset(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[    79.356] (II) modeset(0): v_active: 1440  v_sync: 1443  v_sync_end 1448 v_blanking: 1481 v_border: 0
[    79.356] (II) modeset(0): Serial No: E3LMTF171793
[    79.356] (II) modeset(0): Ranges: V min: 24 V max: 76 Hz, H min: 24 H max: 99 kHz, PixClock max 335 MHz
[    79.356] (II) modeset(0): Monitor name: ASUS PB278
[    79.356] (II) modeset(0): Supported detailed timing:
[    79.357] (II) modeset(0): clock: 27.0 MHz   Image Size:  597 x 336 mm
[    79.357] (II) modeset(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    79.357] (II) modeset(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    79.357] (II) modeset(0): Supported detailed timing:
[    79.357] (II) modeset(0): clock: 74.2 MHz   Image Size:  597 x 336 mm
[    79.357] (II) modeset(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    79.357] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    79.357] (II) modeset(0): Supported detailed timing:
[    79.357] (II) modeset(0): clock: 74.2 MHz   Image Size:  597 x 336 mm
[    79.357] (II) modeset(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[    79.357] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    79.357] (II) modeset(0): Supported detailed timing:
[    79.357] (II) modeset(0): clock: 27.0 MHz   Image Size:  597 x 336 mm
[    79.357] (II) modeset(0): h_active: 720  h_sync: 732  h_sync_end 796 h_blank_end 864 h_border: 0
[    79.357] (II) modeset(0): v_active: 576  v_sync: 581  v_sync_end 586 v_blanking: 625 v_border: 0
[    79.357] (II) modeset(0): Number of EDID sections to follow: 1
[    79.357] (II) modeset(0): EDID (in hex):
[    79.357] (II) modeset(0):   00ffffffffffff000469a327119f0200
[    79.357] (II) modeset(0):   0e180103803c22782aa595aa544fa126
[    79.357] (II) modeset(0):   0a5054b7ef00d1c0b300950081808140
[    79.357] (II) modeset(0):   810081c0714f565e00a0a0a029503020
[    79.357] (II) modeset(0):   350055502100001a000000ff0045334c
[    79.357] (II) modeset(0):   4d54463137313739330a000000fd0018
[    79.357] (II) modeset(0):   4c186321000a202020202020000000fc
[    79.357] (II) modeset(0):   00415355532050423237380a202001b5
[    79.357] (II) modeset(0):   02032571520102031112130414050e0f
[    79.357] (II) modeset(0):   1d1e1f90202122230917078301000065
[    79.357] (II) modeset(0):   030c0010008c0ad08a20e02d10103e96
[    79.357] (II) modeset(0):   00555021000018011d007251d01e206e
[    79.357] (II) modeset(0):   28550055502100001e011d00bc52d01e
[    79.357] (II) modeset(0):   20b828554055502100001e8c0ad09020
[    79.357] (II) modeset(0):   4031200c405500555021000018000000
[    79.357] (II) modeset(0):   00000000000000000000000000000098
[    79.357] (II) modeset(0): Printing probed modes for output HDMI-1
[    79.357] (II) modeset(0): Modeline "2560x1440"x60.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP)
[    79.357] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[    79.357] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    79.357] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    79.357] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    79.357] (II) modeset(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    79.357] (II) modeset(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    79.357] (II) modeset(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[    79.357] (II) modeset(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[    79.357] (II) modeset(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    79.357] (II) modeset(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[    79.357] (II) modeset(0): Modeline "1920x1080"x30.0   74.18  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[    79.357] (II) modeset(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    79.357] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    79.357] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    79.357] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    79.357] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    79.357] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    79.357] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    79.357] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    79.357] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    79.357] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    79.357] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    79.358] (II) modeset(0): Modeline "1440x576"x50.0   54.00  1440 1464 1592 1728  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    79.358] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    79.358] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    79.358] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    79.358] (II) modeset(0): Modeline "1440x480"x60.0   54.05  1440 1472 1596 1716  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    79.358] (II) modeset(0): Modeline "1440x480"x59.9   54.00  1440 1472 1596 1716  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    79.358] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    79.358] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    79.358] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    79.358] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    79.358] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    79.358] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    79.358] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    79.358] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    79.358] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    79.358] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    79.358] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    79.358] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    79.358] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    79.359] (II) modeset(0): EDID for output HDMI-2
[    79.359] (II) modeset(0): Output HDMI-1 connected
[    79.359] (II) modeset(0): Output HDMI-2 disconnected
[    79.359] (II) modeset(0): Using exact sizes for initial modes
[    79.359] (II) modeset(0): Output HDMI-1 using initial mode 2560x1440 +0+0
[    79.359] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    79.359] (==) modeset(0): DPI set to (96, 96)
[    79.359] (II) Loading sub module "fb"
[    79.359] (II) LoadModule: "fb"
[    79.359] (II) Loading /usr/lib/xorg/modules/libfb.so
[    79.363] (II) Module fb: vendor="X.Org Foundation"
[    79.363]    compiled for 1.20.11, module version = 1.0.0
[    79.363]    ABI class: X.Org ANSI C Emulation, version 0.4
[    79.363] (II) UnloadModule: "fbdev"
[    79.363] (II) Unloading fbdev
[    79.363] (II) UnloadSubModule: "fbdevhw"
[    79.363] (II) Unloading fbdevhw
[    79.500] (==) modeset(0): Backing store enabled
[    79.500] (==) modeset(0): Silken mouse disabled
[    79.615] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    79.615] (==) modeset(0): DPMS enabled
[    79.615] (II) modeset(0): [DRI2] Setup complete
[    79.615] (II) modeset(0): [DRI2]   DRI driver: vc4
[    79.616] (II) modeset(0): [DRI2]   VDPAU driver: vc4
[    79.616] (II) Initializing extension Generic Event Extension
[    79.616] (II) Initializing extension SHAPE
[    79.616] (II) Initializing extension MIT-SHM
[    79.616] (II) Initializing extension XInputExtension
[    79.618] (II) Initializing extension XTEST
[    79.618] (II) Initializing extension BIG-REQUESTS
[    79.618] (II) Initializing extension SYNC
[    79.619] (II) Initializing extension XKEYBOARD
[    79.619] (II) Initializing extension XC-MISC
[    79.619] (II) Initializing extension SECURITY
[    79.619] (II) Initializing extension XFIXES
[    79.619] (II) Initializing extension RENDER
[    79.619] (II) Initializing extension RANDR
[    79.619] (II) Initializing extension COMPOSITE
[    79.619] (II) Initializing extension DAMAGE
[    79.619] (II) Initializing extension MIT-SCREEN-SAVER
[    79.619] (II) Initializing extension DOUBLE-BUFFER
[    79.619] (II) Initializing extension RECORD
[    79.619] (II) Initializing extension DPMS
[    79.619] (II) Initializing extension Present
[    79.619] (II) Initializing extension DRI3
[    79.619] (II) Initializing extension X-Resource
[    79.619] (II) Initializing extension XVideo
[    79.619] (II) Initializing extension XVideo-MotionCompensation
[    79.619] (II) Initializing extension GLX
[    79.634] (II) AIGLX: Loaded and initialized vc4
[    79.634] (II) GLX: Initialized DRI2 GL provider for screen 0
[    79.634] (II) Initializing extension XFree86-VidModeExtension
[    79.634] (II) Initializing extension XFree86-DGA
[    79.634] (II) Initializing extension XFree86-DRI
[    79.634] (II) Initializing extension DRI2
[    79.637] (II) modeset(0): Damage tracking initialized
[    79.637] (II) modeset(0): Setting screen physical size to 677 x 381
[    79.769] (II) config/udev: Adding input device Microsoft® LifeCam Studio(TM): (/dev/input/event4)
[    79.770] (**) Microsoft® LifeCam Studio(TM):: Applying InputClass "libinput keyboard catchall"
[    79.770] (II) LoadModule: "libinput"
[    79.770] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    79.787] (II) Module libinput: vendor="X.Org Foundation"
[    79.787]    compiled for 1.20.11, module version = 1.0.1
[    79.787]    Module class: X.Org XInput Driver
[    79.787]    ABI class: X.Org XInput driver, version 24.1
[    79.787] (II) Using input driver 'libinput' for 'Microsoft® LifeCam Studio(TM):'
[    79.790] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 19 paused 0
[    79.790] (**) Microsoft® LifeCam Studio(TM):: always reports core events
[    79.790] (**) Option "Device" "/dev/input/event4"
[    79.791] (**) Option "_source" "server/udev"
[    79.813] (II) event4  - Microsoft® LifeCam Studio(TM):: is tagged by udev as: Keyboard
[    79.813] (II) event4  - Microsoft® LifeCam Studio(TM):: device is a keyboard
[    79.813] (II) event4  - Microsoft® LifeCam Studio(TM):: device removed
[    79.813] (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input4/event4"
[    79.813] (II) XINPUT: Adding extended input device "Microsoft® LifeCam Studio(TM):" (type: KEYBOARD, id 6)
[    79.818] (II) event4  - Microsoft® LifeCam Studio(TM):: is tagged by udev as: Keyboard
[    79.818] (II) event4  - Microsoft® LifeCam Studio(TM):: device is a keyboard
[    79.820] (II) config/udev: Adding input device HID 046a:0023 (/dev/input/event1)
[    79.820] (**) HID 046a:0023: Applying InputClass "libinput keyboard catchall"
[    79.820] (II) Using input driver 'libinput' for 'HID 046a:0023'
[    79.822] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 22 paused 0
[    79.822] (**) HID 046a:0023: always reports core events
[    79.822] (**) Option "Device" "/dev/input/event1"
[    79.822] (**) Option "_source" "server/udev"
[    79.826] (II) event1  - HID 046a:0023: is tagged by udev as: Keyboard
[    79.826] (II) event1  - HID 046a:0023: device is a keyboard
[    79.826] (II) event1  - HID 046a:0023: device removed
[    79.826] (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046A:0023.0002/input/input1/event1"
[    79.826] (II) XINPUT: Adding extended input device "HID 046a:0023" (type: KEYBOARD, id 7)
[    79.830] (II) event1  - HID 046a:0023: is tagged by udev as: Keyboard
[    79.830] (II) event1  - HID 046a:0023: device is a keyboard
[    79.832] (II) config/udev: Adding input device HID 046a:0023 (/dev/input/event2)
[    79.832] (**) HID 046a:0023: Applying InputClass "libinput keyboard catchall"
[    79.833] (II) Using input driver 'libinput' for 'HID 046a:0023'
[    79.834] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 23 paused 0
[    79.834] (**) HID 046a:0023: always reports core events
[    79.834] (**) Option "Device" "/dev/input/event2"
[    79.834] (**) Option "_source" "server/udev"
[    79.837] (II) event2  - HID 046a:0023: is tagged by udev as: Keyboard
[    79.838] (II) event2  - HID 046a:0023: device is a keyboard
[    79.838] (II) event2  - HID 046a:0023: device removed
[    79.838] (II) libinput: HID 046a:0023: needs a virtual subdevice
[    79.838] (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046A:0023.0003/input/input2/event2"
[    79.838] (II) XINPUT: Adding extended input device "HID 046a:0023" (type: MOUSE, id 8)
[    79.838] (**) Option "AccelerationScheme" "none"
[    79.838] (**) HID 046a:0023: (accel) selected scheme none/0
[    79.838] (**) HID 046a:0023: (accel) acceleration factor: 2.000
[    79.838] (**) HID 046a:0023: (accel) acceleration threshold: 4
[    79.841] (II) event2  - HID 046a:0023: is tagged by udev as: Keyboard
[    79.841] (II) event2  - HID 046a:0023: device is a keyboard
[    79.843] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
[    79.843] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "libinput pointer catchall"
[    79.843] (II) Using input driver 'libinput' for 'Logitech USB-PS/2 Optical Mouse'
[    79.905] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 24 paused 0
[    79.905] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    79.905] (**) Option "Device" "/dev/input/event0"
[    79.905] (**) Option "_source" "server/udev"
[    79.913] (II) event0  - Logitech USB-PS/2 Optical Mouse: is tagged by udev as: Mouse
[    79.913] (II) event0  - Logitech USB-PS/2 Optical Mouse: device set to 800 DPI
[    79.913] (II) event0  - Logitech USB-PS/2 Optical Mouse: device is a pointer
[    79.913] (II) event0  - Logitech USB-PS/2 Optical Mouse: device removed
[    79.914] (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C040.0004/input/input0/event0"
[    79.914] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[    79.914] (**) Option "AccelerationScheme" "none"
[    79.914] (**) Logitech USB-PS/2 Optical Mouse: (accel) selected scheme none/0
[    79.914] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[    79.914] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[    79.917] (II) event0  - Logitech USB-PS/2 Optical Mouse: is tagged by udev as: Mouse
[    79.918] (II) event0  - Logitech USB-PS/2 Optical Mouse: device set to 800 DPI
[    79.918] (II) event0  - Logitech USB-PS/2 Optical Mouse: device is a pointer
[    79.920] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[    79.920] (II) No input driver specified, ignoring this device.
[    79.920] (II) This device may have been added with another device file.
[    79.921] (II) config/udev: Adding input device vc4 (/dev/input/event3)
[    79.921] (**) vc4: Applying InputClass "libinput keyboard catchall"
[    79.921] (II) Using input driver 'libinput' for 'vc4'
[    79.923] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 25 paused 0
[    79.923] (**) vc4: always reports core events
[    79.923] (**) Option "Device" "/dev/input/event3"
[    79.923] (**) Option "_source" "server/udev"
[    79.925] (II) event3  - vc4: is tagged by udev as: Keyboard Pointingstick
[    79.925] (II) event3  - vc4: device is a pointer
[    79.925] (II) event3  - vc4: device is a keyboard
[    79.926] (II) event3  - vc4: device removed
[    79.926] (II) libinput: vc4: needs a virtual subdevice
[    79.926] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef00700.hdmi/rc/rc0/input3/event3"
[    79.926] (II) XINPUT: Adding extended input device "vc4" (type: MOUSE, id 10)
[    79.926] (**) Option "AccelerationScheme" "none"
[    79.926] (**) vc4: (accel) selected scheme none/0
[    79.926] (**) vc4: (accel) acceleration factor: 2.000
[    79.926] (**) vc4: (accel) acceleration threshold: 4
[    79.927] (II) event3  - vc4: is tagged by udev as: Keyboard Pointingstick
[    79.928] (II) event3  - vc4: device is a pointer
[    79.928] (II) event3  - vc4: device is a keyboard
[    79.929] (II) config/udev: Adding input device vc4 (/dev/input/event5)
[    79.929] (**) vc4: Applying InputClass "libinput keyboard catchall"
[    79.929] (II) Using input driver 'libinput' for 'vc4'
[    79.931] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 26 paused 0
[    79.931] (**) vc4: always reports core events
[    79.931] (**) Option "Device" "/dev/input/event5"
[    79.931] (**) Option "_source" "server/udev"
[    79.933] (II) event5  - vc4: is tagged by udev as: Keyboard Pointingstick
[    79.933] (II) event5  - vc4: device is a pointer
[    79.933] (II) event5  - vc4: device is a keyboard
[    79.934] (II) event5  - vc4: device removed
[    79.934] (II) libinput: vc4: needs a virtual subdevice
[    79.934] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef05700.hdmi/rc/rc1/input5/event5"
[    79.934] (II) XINPUT: Adding extended input device "vc4" (type: MOUSE, id 11)
[    79.934] (**) Option "AccelerationScheme" "none"
[    79.934] (**) vc4: (accel) selected scheme none/0
[    79.934] (**) vc4: (accel) acceleration factor: 2.000
[    79.934] (**) vc4: (accel) acceleration threshold: 4
[    79.935] (II) event5  - vc4: is tagged by udev as: Keyboard Pointingstick
[    79.936] (II) event5  - vc4: device is a pointer
[    79.936] (II) event5  - vc4: device is a keyboard
[    79.947] (**) HID 046a:0023: Applying InputClass "libinput keyboard catchall"
[    79.948] (II) Using input driver 'libinput' for 'HID 046a:0023'
[    79.948] (II) systemd-logind: returning pre-existing fd for /dev/input/event2 13:66
[    79.948] (**) HID 046a:0023: always reports core events
[    79.948] (**) Option "Device" "/dev/input/event2"
[    79.948] (**) Option "_source" "_driver/libinput"
[    79.948] (II) libinput: HID 046a:0023: is a virtual subdevice
[    79.948] (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046A:0023.0003/input/input2/event2"
[    79.948] (II) XINPUT: Adding extended input device "HID 046a:0023" (type: KEYBOARD, id 12)
[    79.948] (**) vc4: Applying InputClass "libinput keyboard catchall"
[    79.948] (II) Using input driver 'libinput' for 'vc4'
[    79.948] (II) systemd-logind: returning pre-existing fd for /dev/input/event3 13:67
[    79.948] (**) vc4: always reports core events
[    79.948] (**) Option "Device" "/dev/input/event3"
[    79.948] (**) Option "_source" "_driver/libinput"
[    79.948] (II) libinput: vc4: is a virtual subdevice
[    79.948] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef00700.hdmi/rc/rc0/input3/event3"
[    79.948] (II) XINPUT: Adding extended input device "vc4" (type: KEYBOARD, id 13)
[    79.949] (**) vc4: Applying InputClass "libinput keyboard catchall"
[    79.949] (II) Using input driver 'libinput' for 'vc4'
[    79.949] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[    79.949] (**) vc4: always reports core events
[    79.949] (**) Option "Device" "/dev/input/event5"
[    79.949] (**) Option "_source" "_driver/libinput"
[    79.949] (II) libinput: vc4: is a virtual subdevice
[    79.949] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef05700.hdmi/rc/rc1/input5/event5"
[    79.949] (II) XINPUT: Adding extended input device "vc4" (type: KEYBOARD, id 14)
[    83.134] (II) modeset(0): Disabling kernel dirty updates, not required.
[    92.557] (**) Option "fd" "19"
[    92.557] (II) event4  - Microsoft® LifeCam Studio(TM):: device removed
[    92.558] (**) Option "fd" "22"
[    92.558] (II) event1  - HID 046a:0023: device removed
[    92.558] (**) Option "fd" "23"
[    92.558] (**) Option "fd" "24"
[    92.558] (II) event0  - Logitech USB-PS/2 Optical Mouse: device removed
[    92.559] (**) Option "fd" "25"
[    92.559] (**) Option "fd" "26"
[    92.559] (**) Option "fd" "23"
[    92.559] (II) event2  - HID 046a:0023: device removed
[    92.560] (**) Option "fd" "25"
[    92.560] (II) event3  - vc4: device removed
[    92.560] (**) Option "fd" "26"
[    92.560] (II) event5  - vc4: device removed
[    92.575] (II) UnloadModule: "libinput"
[    92.575] (II) systemd-logind: not releasing fd for 13:69, still in use
[    92.575] (II) UnloadModule: "libinput"
[    92.575] (II) systemd-logind: not releasing fd for 13:67, still in use
[    92.575] (II) UnloadModule: "libinput"
[    92.575] (II) systemd-logind: not releasing fd for 13:66, still in use
[    92.575] (II) UnloadModule: "libinput"
[    92.575] (II) systemd-logind: releasing fd for 13:69
[    92.612] (II) UnloadModule: "libinput"
[    92.612] (II) systemd-logind: releasing fd for 13:67
[    92.644] (II) UnloadModule: "libinput"
[    92.644] (II) systemd-logind: releasing fd for 13:64
[    92.680] (II) UnloadModule: "libinput"
[    92.680] (II) systemd-logind: releasing fd for 13:66
[    92.704] (II) UnloadModule: "libinput"
[    92.704] (II) systemd-logind: releasing fd for 13:65
[    92.724] (II) UnloadModule: "libinput"
[    92.724] (II) systemd-logind: releasing fd for 13:68
[    92.801] (II) Server terminated successfully (0). Closing log file.

Failing X session with kernel 5.10.35-1:

dmesg:

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 5.10.35-1-ARCH (builduser@leming) (aarch64-unknown-linux-gnu-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP PREEMPT Fri May 7 06:32:30 MDT 2021
[    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001e800000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] On node 0 totalpages: 2015232
[    0.000000]   DMA zone: 3072 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 196608 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 12288 pages used for memmap
[    0.000000]   DMA32 zone: 770048 pages, LIFO batch:63
[    0.000000]   Normal zone: 16384 pages used for memmap
[    0.000000]   Normal zone: 1048576 pages, LIFO batch:63
[    0.000000] percpu: Embedded 32 pages/cpu s90904 r8192 d31976 u131072
[    0.000000] pcpu-alloc: s90904 r8192 d31976 u131072 alloc=32*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1983488
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:720x480M@60 smsc95xx.macaddr=DC:A6:32:CD:12:8B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x000000001a800000-0x000000001e800000] (64MB)
[    0.000000] Memory: 7544720K/8060928K available (11582K kernel code, 1822K rwdata, 4108K rodata, 2432K init, 1207K bss, 254064K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
[    0.000000] random: get_random_bytes called from start_kernel+0x3d0/0x590 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000242] Console: colour dummy device 80x25
[    0.000633] printk: console [tty1] enabled
[    0.000679] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000710] pid_max: default: 32768 minimum: 301
[    0.001060] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.001175] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.002285] Disabling memory control group subsystem
[    0.003840] rcu: Hierarchical SRCU implementation.
[    0.005124] smp: Bringing up secondary CPUs ...
[    0.005842] Detected PIPT I-cache on CPU1
[    0.005915] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.006744] Detected PIPT I-cache on CPU2
[    0.006790] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.007568] Detected PIPT I-cache on CPU3
[    0.007613] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.007732] smp: Brought up 1 node, 4 CPUs
[    0.007804] SMP: Total of 4 processors activated.
[    0.007821] CPU features: detected: 32-bit EL0 Support
[    0.007838] CPU features: detected: CRC32 instructions
[    0.007855] CPU features: detected: 32-bit EL1 Support
[    0.031537] CPU: All CPU(s) started at EL2
[    0.031607] alternatives: patching kernel code
[    0.033413] devtmpfs: initialized
[    0.042721] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.042779] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.049534] pinctrl core: initialized pinctrl subsystem
[    0.050563] NET: Registered protocol family 16
[    0.052760] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.053026] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.053623] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.053708] audit: initializing netlink subsys (disabled)
[    0.054005] audit: type=2000 audit(0.052:1): state=initialized audit_enabled=0 res=1
[    0.054482] thermal_sys: Registered thermal governor 'step_wise'
[    0.054826] cpuidle: using governor menu
[    0.055234] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.055376] ASID allocator initialised with 65536 entries
[    0.055485] Serial: AMBA PL011 UART driver
[    0.077903] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.084374] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T15:54:12, variant start
[    0.088390] raspberrypi-firmware soc:firmware: Firmware hash is 3e104c5ed69dc796755b7195973a8d00482d76dd
[    0.117529] cryptd: max_cpu_qlen set to 1000
[    0.188662] raid6: neonx8   gen()  1730 MB/s
[    0.256705] raid6: neonx8   xor()  1222 MB/s
[    0.324791] raid6: neonx4   gen()  1824 MB/s
[    0.392885] raid6: neonx4   xor()  1274 MB/s
[    0.460976] raid6: neonx2   gen()  1578 MB/s
[    0.529071] raid6: neonx2   xor()  1181 MB/s
[    0.597169] raid6: neonx1   gen()  1181 MB/s
[    0.665247] raid6: neonx1   xor()   919 MB/s
[    0.733337] raid6: int64x8  gen()  1016 MB/s
[    0.801430] raid6: int64x8  xor()   558 MB/s
[    0.869558] raid6: int64x4  gen()  1039 MB/s
[    0.937619] raid6: int64x4  xor()   566 MB/s
[    1.005714] raid6: int64x2  gen()   960 MB/s
[    1.073795] raid6: int64x2  xor()   509 MB/s
[    1.141906] raid6: int64x1  gen()   732 MB/s
[    1.209983] raid6: int64x1  xor()   378 MB/s
[    1.209999] raid6: using algorithm neonx4 gen() 1824 MB/s
[    1.210014] raid6: .... xor() 1274 MB/s, rmw enabled
[    1.210029] raid6: using neon recovery algorithm
[    1.210599] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    1.212934] iommu: Default domain type: Translated 
[    1.213124] vgaarb: loaded
[    1.213601] SCSI subsystem initialized
[    1.213797] usbcore: registered new interface driver usbfs
[    1.213860] usbcore: registered new interface driver hub
[    1.213916] usbcore: registered new device driver usb
[    1.215643] clocksource: Switched to clocksource arch_sys_counter
[    2.195904] VFS: Disk quotas dquot_6.6.0
[    2.196010] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.196177] FS-Cache: Loaded
[    2.196380] CacheFiles: Loaded
[    2.197045] simple-framebuffer 3eaa9000.framebuffer: framebuffer at 0x3eaa9000, 0x151800 bytes, mapped to 0x(____ptrval____)
[    2.197075] simple-framebuffer 3eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880
[    2.199294] Console: switching to colour frame buffer device 90x30
[    2.202021] simple-framebuffer 3eaa9000.framebuffer: fb0: simplefb registered!
[    2.210198] NET: Registered protocol family 2
[    2.211951] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    2.214064] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    2.215574] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    2.217518] TCP: Hash tables configured (established 65536 bind 65536)
[    2.218916] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    2.220200] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    2.221677] NET: Registered protocol family 1
[    2.223521] RPC: Registered named UNIX socket transport module.
[    2.224691] RPC: Registered udp transport module.
[    2.225802] RPC: Registered tcp transport module.
[    2.226908] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.228058] NET: Registered protocol family 44
[    2.229182] PCI: CLS 0 bytes, default 64
[    2.230481] Trying to unpack rootfs image as initramfs...
[    2.684908] Freeing initrd memory: 6940K
[    2.687773] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    2.690252] kvm [1]: IPA Size Limit: 44 bits
[    2.692445] kvm [1]: vgic interrupt IRQ9
[    2.693735] kvm [1]: Hyp mode initialized successfully
[    2.696147] Initialise system trusted keyrings
[    2.697483] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    2.704122] zbud: loaded
[    2.706622] FS-Cache: Netfs 'nfs' registered for caching
[    2.708209] NFS: Registering the id_resolver key type
[    2.709217] Key type id_resolver registered
[    2.710162] Key type id_legacy registered
[    2.711167] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.712136] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    2.781069] xor: measuring software checksum speed
[    2.785930]    8regs           :  2523 MB/sec
[    2.790233]    32regs          :  2903 MB/sec
[    2.795291]    arm64_neon      :  2362 MB/sec
[    2.796168] xor: using function: 32regs (2903 MB/sec)
[    2.797076] async_tx: api initialized (async)
[    2.797966] Key type asymmetric registered
[    2.798847] Asymmetric key parser 'x509' registered
[    2.799788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    2.800887] io scheduler mq-deadline registered
[    2.801809] io scheduler kyber registered
[    2.802800] io scheduler bfq registered
[    2.806487] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    2.807398] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    2.809272] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    2.811158] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[    2.877724] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    2.878936] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    2.879969] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.880990] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    2.883027] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    2.884156] pci 0000:00:00.0: PME# supported from D0 D3hot
[    2.888920] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    2.890040] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    2.891361] pci 0000:01:00.0: PME# supported from D0 D3hot
[    2.895942] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    2.897017] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    2.898122] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.899167] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    2.900443] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    2.901621] pcieport 0000:00:00.0: PME: Signaling with IRQ 65
[    2.902971] pcieport 0000:00:00.0: AER: enabled with IRQ 65
[    2.909113] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    2.911952] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    2.913327] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    2.923922] brd: module loaded
[    2.936086] loop: module loaded
[    2.938244] Loading iSCSI transport class v2.0-870.
[    2.941852] libphy: Fixed MDIO Bus: probed
[    2.943724] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    2.955657] libphy: bcmgenet MII bus: probed
[    3.011775] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    3.013697] usbcore: registered new interface driver r8152
[    3.014724] usbcore: registered new interface driver lan78xx
[    3.015725] usbcore: registered new interface driver smsc95xx
[    3.064555] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    3.065503] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    3.067075] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
[    3.069983] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.071991] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.073045] usb usb1: Product: xHCI Host Controller
[    3.074075] usb usb1: Manufacturer: Linux 5.10.35-1-ARCH xhci-hcd
[    3.075123] usb usb1: SerialNumber: 0000:01:00.0
[    3.076727] hub 1-0:1.0: USB hub found
[    3.077815] hub 1-0:1.0: 1 port detected
[    3.079250] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    3.080282] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    3.081255] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    3.082455] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    3.084417] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.085456] usb usb2: Product: xHCI Host Controller
[    3.086475] usb usb2: Manufacturer: Linux 5.10.35-1-ARCH xhci-hcd
[    3.087497] usb usb2: SerialNumber: 0000:01:00.0
[    3.089024] hub 2-0:1.0: USB hub found
[    3.090080] hub 2-0:1.0: 4 ports detected
[    3.092359] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    3.093545] dwc_otg: FIQ enabled
[    3.093553] dwc_otg: NAK holdoff enabled
[    3.093560] dwc_otg: FIQ split-transaction FSM enabled
[    3.093570] Module dwc_common_port init
[    3.093991] usbcore: registered new interface driver uas
[    3.095093] usbcore: registered new interface driver usb-storage
[    3.096521] mousedev: PS/2 mouse device common for all mice
[    3.098765] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    3.100241] device-mapper: uevent: version 1.0.3
[    3.101461] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    3.103676] device-mapper: multipath round-robin: version 1.2.0 loaded
[    3.104664] device-mapper: multipath queue-length: version 0.2.0 loaded
[    3.105639] device-mapper: multipath service-time: version 0.3.0 loaded
[    3.106601] device-mapper: raid: Loading target version 1.15.1
[    3.110470] sdhci: Secure Digital Host Controller Interface driver
[    3.111485] sdhci: Copyright(c) Pierre Ossman
[    3.112941] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    3.114275] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
[    3.115304] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.117797] ledtrig-cpu: registered to indicate activity on CPUs
[    3.118331] hid: raw HID events driver (C) Jiri Kosina
[    3.118821] usbcore: registered new interface driver usbhid
[    3.119228] usbhid: USB HID core driver
[    3.121935] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    3.122452] [vc_sm_connected_init]: start
[    3.129412] [vc_sm_connected_init]: installed successfully
[    3.130035] Initializing XFRM netlink socket
[    3.130489] NET: Registered protocol family 17
[    3.131058] Key type dns_resolver registered
[    3.131758] registered taskstats version 1
[    3.132226] Loading compiled-in X.509 certificates
[    3.132843] Key type ._fscrypt registered
[    3.133278] Key type .fscrypt registered
[    3.133702] Key type fscrypt-provisioning registered
[    3.141180] Key type encrypted registered
[    3.146437] uart-pl011 fe201000.serial: there is not valid maps for state default
[    3.147080] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    3.147662] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 23, base_baud = 0) is a PL011 rev2
[    3.154613] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    3.155426] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    3.155966] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    3.184538] of_cfs_init
[    3.185602] of_cfs_init: OK
[    3.204753] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.206902] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.209026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.212344] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.214456] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.216030] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    3.218665] Freeing unused kernel memory: 2432K
[    3.219265] Run /init as init process
[    3.219746]   with arguments:
[    3.219750]     /init
[    3.219753]   with environment:
[    3.219756]     HOME=/
[    3.219760]     TERM=linux
[    3.219763]     selinux=0
[    3.219766]     kgdboc=ttyS0,115200
[    3.242458] random: fast init done
[    3.277019] mmc1: new high speed SDIO card at address 0001
[    3.327219] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
[    3.328338] mmcblk0: mmc0:aaaa SR128 119 GiB
[    3.330397]  mmcblk0: p1 p2
[    3.411683] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.562335] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    3.563749] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.564453] usb 1-1: Product: USB2.0 Hub
[    3.566844] hub 1-1:1.0: USB hub found
[    3.567813] hub 1-1:1.0: 4 ports detected
[    3.719391] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.871669] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[    4.013857] usb 1-1.1: New USB device found, idVendor=045e, idProduct=0811, bcdDevice= 1.14
[    4.015388] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.016216] usb 1-1.1: Product: Microsoft\xc2\xae LifeCam Studio(TM)
[    4.017134] usb 1-1.1: Manufacturer: Microsoft
[    4.025512] hid-generic 0003:045E:0811.0001: hiddev96,hidraw0: USB HID v1.01 Device [Microsoft Microsoft\xc2\xae LifeCam Studio(TM)] on usb-0000:01:00.0-1.1/input4
[    4.111658] usb 1-1.3: new low-speed USB device number 4 using xhci_hcd
[    4.131113] systemd[1]: System time before build time, advancing clock.
[    4.207881] NET: Registered protocol family 10
[    4.233953] Segment Routing with IPv6
[    4.237202] usb 1-1.3: New USB device found, idVendor=046a, idProduct=0023, bcdDevice= 2.20
[    4.238496] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.271292] systemd[1]: systemd 248-5-arch running in system mode. (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    4.275759] systemd[1]: Detected architecture arm64.
[    4.282224] systemd[1]: Hostname set to <alarm>.
[    4.347670] usb 1-1.4: new low-speed USB device number 5 using xhci_hcd
[    4.455853] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c040, bcdDevice=24.30
[    4.457557] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.458485] usb 1-1.4: Product: USB-PS/2 Optical Mouse
[    4.459399] usb 1-1.4: Manufacturer: Logitech
[    4.469211] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C040.0004/input/input0
[    4.471519] hid-generic 0003:046D:C040.0004: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:01:00.0-1.4/input0
[    4.561592] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    4.780293] systemd[1]: Queued start job for default target Graphical Interface.
[    4.782124] random: systemd: uninitialized urandom read (16 bytes read)
[    4.784080] systemd[1]: Created slice system-getty.slice.
[    4.785995] random: systemd: uninitialized urandom read (16 bytes read)
[    4.787036] systemd[1]: Created slice system-modprobe.slice.
[    4.788777] systemd[1]: Created slice User and Session Slice.
[    4.790326] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.791935] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.793819] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.796269] systemd[1]: Reached target Local Encrypted Volumes.
[    4.797821] systemd[1]: Reached target Paths.
[    4.798995] systemd[1]: Reached target Remote File Systems.
[    4.800179] systemd[1]: Reached target Slices.
[    4.801313] systemd[1]: Reached target Swap.
[    4.802415] systemd[1]: Reached target Local Verity Integrity Protected Volumes.
[    4.803678] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.804954] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.808705] systemd[1]: Listening on Process Core Dump Socket.
[    4.810093] systemd[1]: Listening on Journal Audit Socket.
[    4.811295] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.812512] systemd[1]: Listening on Journal Socket.
[    4.813691] systemd[1]: Listening on Network Service Netlink Socket.
[    4.814862] systemd[1]: Listening on udev Control Socket.
[    4.815963] systemd[1]: Listening on udev Kernel Socket.
[    4.817166] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    4.819410] systemd[1]: Mounting POSIX Message Queue File System...
[    4.822330] systemd[1]: Mounting Kernel Debug File System...
[    4.825670] systemd[1]: Mounting Kernel Trace File System...
[    4.830064] systemd[1]: Mounting Temporary Directory (/tmp)...
[    4.833273] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.837048] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.841476] systemd[1]: Starting Load Kernel Module configfs...
[    4.845886] systemd[1]: Starting Load Kernel Module drm...
[    4.850831] systemd[1]: Starting Load Kernel Module fuse...
[    4.854490] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.863293] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[    4.865692] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.868167] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    4.872206] systemd[1]: Starting Apply Kernel Variables...
[    4.872560] fuse: init (API version 7.32)
[    4.876197] systemd[1]: Starting Coldplug All udev Devices...
[    4.881855] systemd[1]: Mounted POSIX Message Queue File System.
[    4.884809] systemd[1]: Mounted Kernel Debug File System.
[    4.886803] systemd[1]: Mounted Kernel Trace File System.
[    4.888937] systemd[1]: Mounted Temporary Directory (/tmp).
[    4.891465] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    4.894932] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.896023] systemd[1]: Finished Load Kernel Module configfs.
[    4.897961] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.898924] systemd[1]: Finished Load Kernel Module drm.
[    4.900732] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.901547] systemd[1]: Finished Load Kernel Module fuse.
[    4.903190] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.906419] systemd[1]: Mounting FUSE Control File System...
[    4.909893] systemd[1]: Mounting Kernel Configuration File System...
[    4.911831] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    4.913896] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    4.916477] systemd[1]: Starting Load/Save Random Seed...
[    4.919587] systemd[1]: Starting Create System Users...
[    4.923914] systemd[1]: Finished Apply Kernel Variables.
[    4.926327] systemd[1]: Mounted FUSE Control File System.
[    4.928635] systemd[1]: Mounted Kernel Configuration File System.
[    4.995244] systemd[1]: Finished Create System Users.
[    4.998490] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.000591] systemd[1]: Finished Coldplug All udev Devices.
[    5.062117] systemd[1]: Finished Create Static Device Nodes in /dev.
[    5.066026] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[    5.071771] systemd[1]: Starting Journal Service...
[    5.077143] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    5.139209] systemd[1]: Started Journal Service.
[    5.141083] audit: type=1130 audit(1618585922.007:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.162507] systemd-journald[219]: Received client request to flush runtime journal.
[    5.174963] systemd-journald[219]: File /var/log/journal/ccede7f130114362b1224b3c95052443/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    5.330563] audit: type=1130 audit(1618585922.195:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.334187] audit: type=1334 audit(1618585922.199:4): prog-id=10 op=LOAD
[    5.502750] random: crng init done
[    5.503319] random: 7 urandom warning(s) missed due to ratelimiting
[    5.569456] audit: type=1130 audit(1618585922.435:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.608663] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[    5.617835] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[    5.622646] iproc-rng200 fe104000.rng: hwrng registered
[    5.629833] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[    5.644077] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[    5.672726] brcmstb-i2c fef04500.i2c:  @97500hz registered in polling mode
[    5.673924] brcmstb-i2c fef09500.i2c:  @97500hz registered in polling mode
[    5.693439] mc: Linux media interface: v0.10
[    5.696636] audit: type=1130 audit(1618585922.563:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.704636] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[    5.706464] bcmgenet fd580000.ethernet eth0: Link is Down
[    5.736861] videodev: Linux video capture interface: v2.00
[    5.748645] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[    5.783058] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.784869] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.816371] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    5.824506] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    5.827035] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    5.830103] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    5.832004] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    5.832904] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    5.834061] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    5.834644] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    5.835337] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    5.840681] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    5.841942] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    5.845230] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    5.848790] input: HID 046a:0023 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046A:0023.0002/input/input1
[    5.852805] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.868376] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    5.869183] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    5.872239] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    5.872962] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    5.875280] uvcvideo: Found UVC 1.00 device Microsoft\xc2\xae LifeCam Studio(TM) (045e:0811)
[    5.875722] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.882657] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    5.883496] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    5.909382] cherry 0003:046A:0023.0002: input,hidraw2: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:01:00.0-1.3/input0
[    5.912863] input: HID 046a:0023 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046A:0023.0003/input/input2
[    5.919358] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    5.920654] Registered IR keymap rc-cec
[    5.921535] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[    5.923528] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input3
[    5.940648] input: Microsoft\xc2\xae LifeCam Studio(TM): as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
[    5.943268] brcmfmac: F1 signature read @0x18000000=0x15264345
[    5.946765] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.948419] usbcore: registered new interface driver brcmfmac
[    5.976170] cherry 0003:046A:0023.0003: input,hidraw3: USB HID v1.11 Device [HID 046a:0023] on usb-0000:01:00.0-1.3/input1
[    5.978300] usbcore: registered new interface driver uvcvideo
[    5.979095] USB Video Class driver (1.1.1)
[    5.979285] debugfs: Directory 'fef00700.hdmi' with parent 'vc4-hdmi-0' already present!
[    6.004251] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[    6.012079] Registered IR keymap rc-cec
[    6.014454] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[    6.015476] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input5
[    6.020227] debugfs: Directory 'fef05700.hdmi' with parent 'vc4-hdmi-1' already present!
[    6.021465] Bluetooth: Core ver 2.22
[    6.022942] NET: Registered protocol family 31
[    6.023992] Bluetooth: HCI device and connection manager initialized
[    6.025085] Bluetooth: HCI socket layer initialized
[    6.026678] Bluetooth: L2CAP socket layer initialized
[    6.027428] Bluetooth: SCO socket layer initialized
[    6.030120] audit: type=1130 audit(1618585922.895:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.033890] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[    6.034752] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[    6.035845] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[    6.036727] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[    6.037700] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[    6.041151] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[    6.042132] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[    6.043192] checking generic (3eaa9000 151800) vs hw (0 ffffffffffffffff)
[    6.043198] fb0: switching to vc4drmfb from simple
[    6.046901] Console: switching to colour dummy device 80x25
[    6.071932] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[    6.147717] Console: switching to colour frame buffer device 90x30
[    6.165125] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[    6.183877] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    6.189125] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    6.197806] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Sep 18 2020 02:27:58 version 7.45.221 (3a6d3a0 CY) FWID 01-bbd9282b
[    6.248405] audit: type=1130 audit(1618585923.115:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.339223] usbcore: registered new interface driver snd-usb-audio
[    6.360520] audit: type=1130 audit(1618585923.227:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.468155] audit: type=1130 audit(1618585923.335:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.505566] audit: type=1130 audit(1618585923.371:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.791923] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    9.792076] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.257576] kauditd_printk_skb: 23 callbacks suppressed
[   11.257588] audit: type=1131 audit(1620419443.498:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.728448] audit: type=1100 audit(1620419445.970:36): pid=330 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="alarm" exe="/usr/bin/login" hostname=alarm addr=? terminal=/dev/tty1 res=success'
[   13.739313] audit: type=1101 audit(1620419445.978:37): pid=330 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="alarm" exe="/usr/bin/login" hostname=alarm addr=? terminal=/dev/tty1 res=success'
[   13.742705] audit: type=1103 audit(1620419445.982:38): pid=330 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="alarm" exe="/usr/bin/login" hostname=alarm addr=? terminal=/dev/tty1 res=success'
[   13.743114] audit: type=1006 audit(1620419445.982:39): pid=330 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   13.792244] audit: type=1130 audit(1620419446.034:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.808623] audit: type=1101 audit(1620419446.050:41): pid=347 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="alarm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.809982] audit: type=1103 audit(1620419446.050:42): pid=347 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="alarm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   13.812082] audit: type=1006 audit(1620419446.050:43): pid=347 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   13.813788] audit: type=1105 audit(1620419446.054:44): pid=347 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="alarm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.023550] kauditd_printk_skb: 5 callbacks suppressed
[   18.023562] audit: type=1131 audit(1620419450.262:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Xorg.0.log

[    76.817] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    76.818] 
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[    76.818] Build Operating System: Linux Archlinux
[    76.818] Current Operating System: Linux alarm 5.10.35-1-ARCH #1 SMP PREEMPT Fri May 7 06:32:30 MDT 2021 aarch64
[    76.818] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:720x480M@60 smsc95xx.macaddr=DC:A6:32:CD:12:8B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200
[    76.819] Build Date: 13 April 2021  09:16:13PM
[    76.819]  
[    76.819] Current version of pixman: 0.40.0
[    76.819]    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    76.819] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    76.820] (==) Log file: "/home/alarm/.local/share/xorg/Xorg.0.log", Time: Fri May  7 22:31:49 2021
[    76.823] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    76.824] (==) No Layout section.  Using the first Screen section.
[    76.824] (==) No screen section available. Using defaults.
[    76.824] (**) |-->Screen "Default Screen Section" (0)
[    76.824] (**) |   |-->Monitor "<default monitor>"
[    76.825] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    76.825] (==) Automatically adding devices
[    76.825] (==) Automatically enabling devices
[    76.825] (==) Automatically adding GPU devices
[    76.825] (==) Automatically binding GPU devices
[    76.825] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    76.825] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    76.825]    Entry deleted from font path.
[    76.826] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[    76.826]    Entry deleted from font path.
[    76.826]    (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[    76.826] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    76.826]    Entry deleted from font path.
[    76.826] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    76.826]    Entry deleted from font path.
[    76.826] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    76.826]    Entry deleted from font path.
[    76.826] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    76.826]    Entry deleted from font path.
[    76.826] (==) FontPath set to:

[    76.826] (==) ModulePath set to "/usr/lib/xorg/modules"
[    76.826] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    76.829] (II) Module ABI versions:
[    76.829]    X.Org ANSI C Emulation: 0.4
[    76.829]    X.Org Video Driver: 24.1
[    76.829]    X.Org XInput driver : 24.1
[    76.829]    X.Org Server Extension : 10.0
[    76.830] (++) using VT number 1

[    76.834] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    76.836] (II) xfree86: Adding drm device (/dev/dri/card1)
[    76.837] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[    76.838] (II) xfree86: Adding drm device (/dev/dri/card0)
[    76.839] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[    76.840] (II) no primary bus or device found
[    76.840]    falling back to /sys/devices/platform/gpu/drm/card1
[    76.840] (II) LoadModule: "glx"
[    76.844] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    76.909] (II) Module glx: vendor="X.Org Foundation"
[    76.909]    compiled for 1.20.11, module version = 1.0.0
[    76.909]    ABI class: X.Org Server Extension, version 10.0
[    76.909] (==) Matched modesetting as autoconfigured driver 0
[    76.909] (==) Matched fbdev as autoconfigured driver 1
[    76.909] (==) Assigned the driver to the xf86ConfigLayout
[    76.909] (II) LoadModule: "modesetting"
[    76.910] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    76.921] (II) Module modesetting: vendor="X.Org Foundation"
[    76.921]    compiled for 1.20.11, module version = 1.20.11
[    76.921]    Module class: X.Org Video Driver
[    76.921]    ABI class: X.Org Video Driver, version 24.1
[    76.921] (II) LoadModule: "fbdev"
[    76.921] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    76.924] (II) Module fbdev: vendor="X.Org Foundation"
[    76.924]    compiled for 1.20.8, module version = 0.5.0
[    76.924]    Module class: X.Org Video Driver
[    76.924]    ABI class: X.Org Video Driver, version 24.1
[    76.924] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    76.924] (II) FBDEV: driver for framebuffer: fbdev
[    76.924] (II) modeset(0): using drv /dev/dri/card1
[    76.924] (WW) Falling back to old probe method for fbdev
[    76.924] (II) Loading sub module "fbdevhw"
[    76.924] (II) LoadModule: "fbdevhw"
[    76.925] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    76.926] (II) Module fbdevhw: vendor="X.Org Foundation"
[    76.926]    compiled for 1.20.11, module version = 0.0.2
[    76.926]    ABI class: X.Org Video Driver, version 24.1
[    76.926] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    76.927] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    76.927] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    76.927] (==) modeset(0): RGB weight 888
[    76.927] (==) modeset(0): Default visual is TrueColor
[    76.927] (II) Loading sub module "glamoregl"
[    76.927] (II) LoadModule: "glamoregl"
[    76.927] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    76.962] (II) Module glamoregl: vendor="X.Org Foundation"
[    76.962]    compiled for 1.20.11, module version = 1.0.1
[    76.962]    ABI class: X.Org ANSI C Emulation, version 0.4
[    78.259] (II) modeset(0): glamor X acceleration enabled on V3D 4.2
[    78.259] (II) modeset(0): glamor initialized
[    78.286] (II) modeset(0): Output HDMI-1 has no monitor section
[    78.287] (II) modeset(0): Output HDMI-2 has no monitor section
[    78.338] (II) modeset(0): EDID for output HDMI-1
[    78.338] (II) modeset(0): Manufacturer: ACI  Model: 27a3  Serial#: 171793
[    78.338] (II) modeset(0): Year: 2014  Week: 14
[    78.338] (II) modeset(0): EDID Version: 1.3
[    78.338] (II) modeset(0): Digital Display Input
[    78.338] (II) modeset(0): Max Image Size [cm]: horiz.: 60  vert.: 34
[    78.338] (II) modeset(0): Gamma: 2.20
[    78.338] (II) modeset(0): DPMS capabilities: Off
[    78.338] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    78.338] (II) modeset(0): First detailed timing is preferred mode
[    78.338] (II) modeset(0): redX: 0.666 redY: 0.330   greenX: 0.310 greenY: 0.630
[    78.338] (II) modeset(0): blueX: 0.150 blueY: 0.040   whiteX: 0.313 whiteY: 0.329
[    78.338] (II) modeset(0): Supported established timings:
[    78.338] (II) modeset(0): 720x400@70Hz
[    78.338] (II) modeset(0): 640x480@60Hz
[    78.338] (II) modeset(0): 640x480@67Hz
[    78.338] (II) modeset(0): 640x480@75Hz
[    78.338] (II) modeset(0): 800x600@56Hz
[    78.338] (II) modeset(0): 800x600@60Hz
[    78.338] (II) modeset(0): 800x600@72Hz
[    78.338] (II) modeset(0): 800x600@75Hz
[    78.338] (II) modeset(0): 832x624@75Hz
[    78.338] (II) modeset(0): 1024x768@60Hz
[    78.338] (II) modeset(0): 1024x768@70Hz
[    78.338] (II) modeset(0): 1024x768@75Hz
[    78.338] (II) modeset(0): 1280x1024@75Hz
[    78.338] (II) modeset(0): Manufacturer's mask: 0
[    78.338] (II) modeset(0): Supported standard timings:
[    78.338] (II) modeset(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    78.338] (II) modeset(0): #1: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    78.338] (II) modeset(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    78.338] (II) modeset(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    78.338] (II) modeset(0): #4: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    78.338] (II) modeset(0): #5: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    78.338] (II) modeset(0): #6: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    78.338] (II) modeset(0): #7: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    78.338] (II) modeset(0): Supported detailed timing:
[    78.338] (II) modeset(0): clock: 241.5 MHz   Image Size:  597 x 336 mm
[    78.338] (II) modeset(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[    78.338] (II) modeset(0): v_active: 1440  v_sync: 1443  v_sync_end 1448 v_blanking: 1481 v_border: 0
[    78.338] (II) modeset(0): Serial No: E3LMTF171793
[    78.338] (II) modeset(0): Ranges: V min: 24 V max: 76 Hz, H min: 24 H max: 99 kHz, PixClock max 335 MHz
[    78.338] (II) modeset(0): Monitor name: ASUS PB278
[    78.338] (II) modeset(0): Supported detailed timing:
[    78.338] (II) modeset(0): clock: 27.0 MHz   Image Size:  597 x 336 mm
[    78.338] (II) modeset(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    78.338] (II) modeset(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    78.338] (II) modeset(0): Supported detailed timing:
[    78.338] (II) modeset(0): clock: 74.2 MHz   Image Size:  597 x 336 mm
[    78.338] (II) modeset(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    78.338] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    78.338] (II) modeset(0): Supported detailed timing:
[    78.338] (II) modeset(0): clock: 74.2 MHz   Image Size:  597 x 336 mm
[    78.338] (II) modeset(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[    78.338] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    78.338] (II) modeset(0): Supported detailed timing:
[    78.338] (II) modeset(0): clock: 27.0 MHz   Image Size:  597 x 336 mm
[    78.339] (II) modeset(0): h_active: 720  h_sync: 732  h_sync_end 796 h_blank_end 864 h_border: 0
[    78.339] (II) modeset(0): v_active: 576  v_sync: 581  v_sync_end 586 v_blanking: 625 v_border: 0
[    78.339] (II) modeset(0): Number of EDID sections to follow: 1
[    78.339] (II) modeset(0): EDID (in hex):
[    78.339] (II) modeset(0):   00ffffffffffff000469a327119f0200
[    78.339] (II) modeset(0):   0e180103803c22782aa595aa544fa126
[    78.339] (II) modeset(0):   0a5054b7ef00d1c0b300950081808140
[    78.339] (II) modeset(0):   810081c0714f565e00a0a0a029503020
[    78.339] (II) modeset(0):   350055502100001a000000ff0045334c
[    78.339] (II) modeset(0):   4d54463137313739330a000000fd0018
[    78.339] (II) modeset(0):   4c186321000a202020202020000000fc
[    78.339] (II) modeset(0):   00415355532050423237380a202001b5
[    78.339] (II) modeset(0):   02032571520102031112130414050e0f
[    78.339] (II) modeset(0):   1d1e1f90202122230917078301000065
[    78.339] (II) modeset(0):   030c0010008c0ad08a20e02d10103e96
[    78.339] (II) modeset(0):   00555021000018011d007251d01e206e
[    78.339] (II) modeset(0):   28550055502100001e011d00bc52d01e
[    78.339] (II) modeset(0):   20b828554055502100001e8c0ad09020
[    78.339] (II) modeset(0):   4031200c405500555021000018000000
[    78.339] (II) modeset(0):   00000000000000000000000000000098
[    78.339] (II) modeset(0): Printing probed modes for output HDMI-1
[    78.339] (II) modeset(0): Modeline "2560x1440"x60.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP)
[    78.339] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[    78.339] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    78.339] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    78.339] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    78.339] (II) modeset(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    78.339] (II) modeset(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    78.339] (II) modeset(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[    78.339] (II) modeset(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[    78.339] (II) modeset(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    78.339] (II) modeset(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[    78.339] (II) modeset(0): Modeline "1920x1080"x30.0   74.18  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[    78.339] (II) modeset(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    78.339] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    78.339] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    78.339] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    78.339] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    78.339] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    78.339] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    78.339] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    78.339] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    78.339] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    78.339] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    78.339] (II) modeset(0): Modeline "1440x576"x50.0   54.00  1440 1464 1592 1728  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    78.339] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    78.339] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    78.339] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    78.339] (II) modeset(0): Modeline "1440x480"x60.0   54.05  1440 1472 1596 1716  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    78.339] (II) modeset(0): Modeline "1440x480"x59.9   54.00  1440 1472 1596 1716  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    78.339] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    78.339] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    78.339] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    78.339] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    78.339] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    78.339] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    78.340] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    78.340] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    78.340] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    78.340] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    78.340] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    78.340] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    78.340] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    78.341] (II) modeset(0): EDID for output HDMI-2
[    78.341] (II) modeset(0): Output HDMI-1 connected
[    78.341] (II) modeset(0): Output HDMI-2 disconnected
[    78.341] (II) modeset(0): Using exact sizes for initial modes
[    78.341] (II) modeset(0): Output HDMI-1 using initial mode 2560x1440 +0+0
[    78.341] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    78.341] (==) modeset(0): DPI set to (96, 96)
[    78.341] (II) Loading sub module "fb"
[    78.341] (II) LoadModule: "fb"
[    78.341] (II) Loading /usr/lib/xorg/modules/libfb.so
[    78.345] (II) Module fb: vendor="X.Org Foundation"
[    78.345]    compiled for 1.20.11, module version = 1.0.0
[    78.345]    ABI class: X.Org ANSI C Emulation, version 0.4
[    78.345] (II) UnloadModule: "fbdev"
[    78.345] (II) Unloading fbdev
[    78.345] (II) UnloadSubModule: "fbdevhw"
[    78.345] (II) Unloading fbdevhw
[    78.487] (==) modeset(0): Backing store enabled
[    78.487] (==) modeset(0): Silken mouse disabled
[    78.628] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    78.629] (==) modeset(0): DPMS enabled
[    78.629] (II) modeset(0): [DRI2] Setup complete
[    78.629] (II) modeset(0): [DRI2]   DRI driver: vc4
[    78.629] (II) modeset(0): [DRI2]   VDPAU driver: vc4
[    78.629] (II) Initializing extension Generic Event Extension
[    78.629] (II) Initializing extension SHAPE
[    78.629] (II) Initializing extension MIT-SHM
[    78.629] (II) Initializing extension XInputExtension
[    78.632] (II) Initializing extension XTEST
[    78.632] (II) Initializing extension BIG-REQUESTS
[    78.632] (II) Initializing extension SYNC
[    78.632] (II) Initializing extension XKEYBOARD
[    78.632] (II) Initializing extension XC-MISC
[    78.632] (II) Initializing extension SECURITY
[    78.632] (II) Initializing extension XFIXES
[    78.632] (II) Initializing extension RENDER
[    78.632] (II) Initializing extension RANDR
[    78.632] (II) Initializing extension COMPOSITE
[    78.632] (II) Initializing extension DAMAGE
[    78.632] (II) Initializing extension MIT-SCREEN-SAVER
[    78.632] (II) Initializing extension DOUBLE-BUFFER
[    78.633] (II) Initializing extension RECORD
[    78.633] (II) Initializing extension DPMS
[    78.633] (II) Initializing extension Present
[    78.633] (II) Initializing extension DRI3
[    78.633] (II) Initializing extension X-Resource
[    78.633] (II) Initializing extension XVideo
[    78.633] (II) Initializing extension XVideo-MotionCompensation
[    78.633] (II) Initializing extension GLX
[    78.646] (II) AIGLX: Loaded and initialized vc4
[    78.646] (II) GLX: Initialized DRI2 GL provider for screen 0
[    78.646] (II) Initializing extension XFree86-VidModeExtension
[    78.646] (II) Initializing extension XFree86-DGA
[    78.646] (II) Initializing extension XFree86-DRI
[    78.646] (II) Initializing extension DRI2
[    78.650] (II) modeset(0): Damage tracking initialized
[    78.650] (II) modeset(0): Setting screen physical size to 677 x 381
[    78.783] (II) config/udev: Adding input device Microsoft® LifeCam Studio(TM): (/dev/input/event4)
[    78.783] (**) Microsoft® LifeCam Studio(TM):: Applying InputClass "libinput keyboard catchall"
[    78.783] (II) LoadModule: "libinput"
[    78.784] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    78.802] (II) Module libinput: vendor="X.Org Foundation"
[    78.802]    compiled for 1.20.11, module version = 1.0.1
[    78.802]    Module class: X.Org XInput Driver
[    78.803]    ABI class: X.Org XInput driver, version 24.1
[    78.803] (II) Using input driver 'libinput' for 'Microsoft® LifeCam Studio(TM):'
[    78.806] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 19 paused 0
[    78.806] (**) Microsoft® LifeCam Studio(TM):: always reports core events
[    78.806] (**) Option "Device" "/dev/input/event4"
[    78.807] (**) Option "_source" "server/udev"
[    78.830] (II) event4  - Microsoft® LifeCam Studio(TM):: is tagged by udev as: Keyboard
[    78.830] (II) event4  - Microsoft® LifeCam Studio(TM):: device is a keyboard
[    78.830] (II) event4  - Microsoft® LifeCam Studio(TM):: device removed
[    78.830] (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input4/event4"
[    78.830] (II) XINPUT: Adding extended input device "Microsoft® LifeCam Studio(TM):" (type: KEYBOARD, id 6)
[    78.835] (II) event4  - Microsoft® LifeCam Studio(TM):: is tagged by udev as: Keyboard
[    78.835] (II) event4  - Microsoft® LifeCam Studio(TM):: device is a keyboard
[    78.838] (II) config/udev: Adding input device HID 046a:0023 (/dev/input/event1)
[    78.838] (**) HID 046a:0023: Applying InputClass "libinput keyboard catchall"
[    78.838] (II) Using input driver 'libinput' for 'HID 046a:0023'
[    78.840] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 22 paused 0
[    78.840] (**) HID 046a:0023: always reports core events
[    78.840] (**) Option "Device" "/dev/input/event1"
[    78.840] (**) Option "_source" "server/udev"
[    78.844] (II) event1  - HID 046a:0023: is tagged by udev as: Keyboard
[    78.844] (II) event1  - HID 046a:0023: device is a keyboard
[    78.844] (II) event1  - HID 046a:0023: device removed
[    78.844] (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046A:0023.0002/input/input1/event1"
[    78.844] (II) XINPUT: Adding extended input device "HID 046a:0023" (type: KEYBOARD, id 7)
[    78.849] (II) event1  - HID 046a:0023: is tagged by udev as: Keyboard
[    78.849] (II) event1  - HID 046a:0023: device is a keyboard
[    78.852] (II) config/udev: Adding input device HID 046a:0023 (/dev/input/event2)
[    78.852] (**) HID 046a:0023: Applying InputClass "libinput keyboard catchall"
[    78.852] (II) Using input driver 'libinput' for 'HID 046a:0023'
[    78.854] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 23 paused 0
[    78.854] (**) HID 046a:0023: always reports core events
[    78.854] (**) Option "Device" "/dev/input/event2"
[    78.854] (**) Option "_source" "server/udev"
[    78.858] (II) event2  - HID 046a:0023: is tagged by udev as: Keyboard
[    78.858] (II) event2  - HID 046a:0023: device is a keyboard
[    78.858] (II) event2  - HID 046a:0023: device removed
[    78.858] (II) libinput: HID 046a:0023: needs a virtual subdevice
[    78.858] (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046A:0023.0003/input/input2/event2"
[    78.858] (II) XINPUT: Adding extended input device "HID 046a:0023" (type: MOUSE, id 8)
[    78.859] (**) Option "AccelerationScheme" "none"
[    78.859] (**) HID 046a:0023: (accel) selected scheme none/0
[    78.859] (**) HID 046a:0023: (accel) acceleration factor: 2.000
[    78.859] (**) HID 046a:0023: (accel) acceleration threshold: 4
[    78.862] (II) event2  - HID 046a:0023: is tagged by udev as: Keyboard
[    78.862] (II) event2  - HID 046a:0023: device is a keyboard
[    78.864] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
[    78.864] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "libinput pointer catchall"
[    78.864] (II) Using input driver 'libinput' for 'Logitech USB-PS/2 Optical Mouse'
[    78.924] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 24 paused 0
[    78.925] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    78.925] (**) Option "Device" "/dev/input/event0"
[    78.925] (**) Option "_source" "server/udev"
[    78.933] (II) event0  - Logitech USB-PS/2 Optical Mouse: is tagged by udev as: Mouse
[    78.934] (II) event0  - Logitech USB-PS/2 Optical Mouse: device set to 800 DPI
[    78.934] (II) event0  - Logitech USB-PS/2 Optical Mouse: device is a pointer
[    78.934] (II) event0  - Logitech USB-PS/2 Optical Mouse: device removed
[    78.935] (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C040.0004/input/input0/event0"
[    78.935] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[    78.935] (**) Option "AccelerationScheme" "none"
[    78.935] (**) Logitech USB-PS/2 Optical Mouse: (accel) selected scheme none/0
[    78.935] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[    78.935] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[    78.941] (II) event0  - Logitech USB-PS/2 Optical Mouse: is tagged by udev as: Mouse
[    78.941] (II) event0  - Logitech USB-PS/2 Optical Mouse: device set to 800 DPI
[    78.941] (II) event0  - Logitech USB-PS/2 Optical Mouse: device is a pointer
[    78.943] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[    78.943] (II) No input driver specified, ignoring this device.
[    78.943] (II) This device may have been added with another device file.
[    78.944] (II) config/udev: Adding input device vc4 (/dev/input/event3)
[    78.944] (**) vc4: Applying InputClass "libinput keyboard catchall"
[    78.944] (II) Using input driver 'libinput' for 'vc4'
[    78.945] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 25 paused 0
[    78.945] (**) vc4: always reports core events
[    78.945] (**) Option "Device" "/dev/input/event3"
[    78.945] (**) Option "_source" "server/udev"
[    78.947] (II) event3  - vc4: is tagged by udev as: Keyboard Pointingstick
[    78.947] (II) event3  - vc4: device is a pointer
[    78.947] (II) event3  - vc4: device is a keyboard
[    78.947] (II) event3  - vc4: device removed
[    78.948] (II) libinput: vc4: needs a virtual subdevice
[    78.948] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef00700.hdmi/rc/rc0/input3/event3"
[    78.948] (II) XINPUT: Adding extended input device "vc4" (type: MOUSE, id 10)
[    78.948] (**) Option "AccelerationScheme" "none"
[    78.948] (**) vc4: (accel) selected scheme none/0
[    78.948] (**) vc4: (accel) acceleration factor: 2.000
[    78.948] (**) vc4: (accel) acceleration threshold: 4
[    78.949] (II) event3  - vc4: is tagged by udev as: Keyboard Pointingstick
[    78.950] (II) event3  - vc4: device is a pointer
[    78.950] (II) event3  - vc4: device is a keyboard
[    78.951] (II) config/udev: Adding input device vc4 (/dev/input/event5)
[    78.951] (**) vc4: Applying InputClass "libinput keyboard catchall"
[    78.951] (II) Using input driver 'libinput' for 'vc4'
[    78.952] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 26 paused 0
[    78.953] (**) vc4: always reports core events
[    78.953] (**) Option "Device" "/dev/input/event5"
[    78.953] (**) Option "_source" "server/udev"
[    78.954] (II) event5  - vc4: is tagged by udev as: Keyboard Pointingstick
[    78.954] (II) event5  - vc4: device is a pointer
[    78.954] (II) event5  - vc4: device is a keyboard
[    78.955] (II) event5  - vc4: device removed
[    78.955] (II) libinput: vc4: needs a virtual subdevice
[    78.955] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef05700.hdmi/rc/rc1/input5/event5"
[    78.955] (II) XINPUT: Adding extended input device "vc4" (type: MOUSE, id 11)
[    78.955] (**) Option "AccelerationScheme" "none"
[    78.955] (**) vc4: (accel) selected scheme none/0
[    78.955] (**) vc4: (accel) acceleration factor: 2.000
[    78.955] (**) vc4: (accel) acceleration threshold: 4
[    78.957] (II) event5  - vc4: is tagged by udev as: Keyboard Pointingstick
[    78.957] (II) event5  - vc4: device is a pointer
[    78.957] (II) event5  - vc4: device is a keyboard
[    78.977] (**) HID 046a:0023: Applying InputClass "libinput keyboard catchall"
[    78.977] (II) Using input driver 'libinput' for 'HID 046a:0023'
[    78.977] (II) systemd-logind: returning pre-existing fd for /dev/input/event2 13:66
[    78.977] (**) HID 046a:0023: always reports core events
[    78.977] (**) Option "Device" "/dev/input/event2"
[    78.977] (**) Option "_source" "_driver/libinput"
[    78.977] (II) libinput: HID 046a:0023: is a virtual subdevice
[    78.977] (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046A:0023.0003/input/input2/event2"
[    78.977] (II) XINPUT: Adding extended input device "HID 046a:0023" (type: KEYBOARD, id 12)
[    78.978] (**) vc4: Applying InputClass "libinput keyboard catchall"
[    78.978] (II) Using input driver 'libinput' for 'vc4'
[    78.978] (II) systemd-logind: returning pre-existing fd for /dev/input/event3 13:67
[    78.978] (**) vc4: always reports core events
[    78.978] (**) Option "Device" "/dev/input/event3"
[    78.978] (**) Option "_source" "_driver/libinput"
[    78.978] (II) libinput: vc4: is a virtual subdevice
[    78.978] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef00700.hdmi/rc/rc0/input3/event3"
[    78.978] (II) XINPUT: Adding extended input device "vc4" (type: KEYBOARD, id 13)
[    78.978] (**) vc4: Applying InputClass "libinput keyboard catchall"
[    78.978] (II) Using input driver 'libinput' for 'vc4'
[    78.978] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[    78.979] (**) vc4: always reports core events
[    78.979] (**) Option "Device" "/dev/input/event5"
[    78.979] (**) Option "_source" "_driver/libinput"
[    78.979] (II) libinput: vc4: is a virtual subdevice
[    78.979] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef05700.hdmi/rc/rc1/input5/event5"
[    78.979] (II) XINPUT: Adding extended input device "vc4" (type: KEYBOARD, id 14)
[   121.822] (**) Option "fd" "19"
[   121.822] (II) event4  - Microsoft® LifeCam Studio(TM):: device removed
[   121.823] (**) Option "fd" "22"
[   121.823] (II) event1  - HID 046a:0023: device removed
[   121.824] (**) Option "fd" "23"
[   121.825] (**) Option "fd" "24"
[   121.825] (II) event0  - Logitech USB-PS/2 Optical Mouse: device removed
[   121.825] (**) Option "fd" "25"
[   121.826] (**) Option "fd" "26"
[   121.827] (**) Option "fd" "23"
[   121.827] (II) event2  - HID 046a:0023: device removed
[   121.827] (**) Option "fd" "25"
[   121.827] (II) event3  - vc4: device removed
[   121.828] (**) Option "fd" "26"
[   121.828] (II) event5  - vc4: device removed
[   121.829] (II) AIGLX: Suspending AIGLX clients for VT switch
[   142.370] (II) systemd-logind: got pause for 13:64
[   142.370] (II) systemd-logind: got pause for 226:0
[   142.370] (II) systemd-logind: got pause for 13:66
[   142.370] (II) systemd-logind: got pause for 13:67
[   142.370] (II) systemd-logind: got pause for 13:65
[   142.370] (II) systemd-logind: got pause for 226:1
[   142.370] (II) systemd-logind: got pause for 13:68
[   142.370] (II) systemd-logind: got pause for 13:69
[   359.222] (II) UnloadModule: "libinput"
[   359.223] (II) systemd-logind: not releasing fd for 13:69, still in use
[   359.223] (II) UnloadModule: "libinput"
[   359.223] (II) systemd-logind: not releasing fd for 13:67, still in use
[   359.223] (II) UnloadModule: "libinput"
[   359.223] (II) systemd-logind: not releasing fd for 13:66, still in use
[   359.223] (II) UnloadModule: "libinput"
[   359.223] (II) systemd-logind: releasing fd for 13:69
[   359.249] (II) UnloadModule: "libinput"
[   359.249] (II) systemd-logind: releasing fd for 13:67
[   359.284] (II) UnloadModule: "libinput"
[   359.285] (II) systemd-logind: releasing fd for 13:64
[   359.324] (II) UnloadModule: "libinput"
[   359.324] (II) systemd-logind: releasing fd for 13:66
[   359.352] (II) UnloadModule: "libinput"
[   359.352] (II) systemd-logind: releasing fd for 13:65
[   359.373] (II) UnloadModule: "libinput"
[   359.373] (II) systemd-logind: releasing fd for 13:68
[   359.443] (II) Server terminated successfully (0). Closing log file.

Additional context

Monitor:

ASUS PB278 Vendor: Ancor Communications Inc Serial Number: E3LMTF171793 Display Size: 60cm x 34cm

Custom HDMI modes

As seen in the EDID entry in the output of dmesg, my native screen resolution is 2560x1440 @ 60Hz. Changing the contents of /boot/config.txt to

over_voltage=5
arm_freq=2000

dtoverlay=vc4-kms-v3d
disable_overscan=1

hdmi_cvt=2560 1440 60
hdmi_group=2
hdmi_mode=87
hdmi_drive=2

initramfs initramfs-linux.img followkernel

does not change the erroneous behavior (I observe exactly the same problem; logs related to the above settings can be provided if requested.)

[user13571113]

As replied here, the issue is resolved for me as of June 20, 2021.