search

raspberrypi / linux

Kernel source tree for Raspberry Pi-provided kernel builds. Issues unrelated to the linux kernel should be posted on the community forum at https://forums.raspberrypi.com/
Other
11.14k stars 4.99k forks source link

HDMI audio causing screen reset on RasPi 4B with Elecrow DIS78950R / RC070S display #5124

Closed sesquipedality closed 2 years ago

sesquipedality commented 2 years ago

Describe the bug

HDMI audio fails to work on Raspberry Pi 4B in a non X environment when using a 7" Elecrow DIS78950R / RC070S display. The symptom is that a click is heard on the built in speakers and then the display is reset.

I am able to work around the problem but explicitly setting a DMT mode in /boot/config,txt after which audio works correctly. Setting a CEA mode does not work. My assumption is that the Pi is booting with a CEA mode by default. Adding the following to /boot/config.txt makes the problem go away.

#hdmi_group=2
#hdmi_mode=85

Steps to reproduce the behaviour

Boot the Pi while connected to a Elecrow DIS78950R / RC070S display. From the command line, enter

speaker-test -c2 -t wav -D hdmi:vc4hdmi0

Device (s)

Raspberry Pi 4 Mod. B

System

Generated on the same system with the workaround applied.

System Information
------------------

Raspberry Pi 4 Model B Rev 1.5
PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"

Raspberry Pi reference 2022-04-04
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 226b479f8d32919c9fe36dd5b4c20c02682f8180, stage2

Linux gaia 5.15.32-v7l+ #1538 SMP Thu Mar 31 19:39:41 BST 2022 armv7l GNU/Linux
Revision        : b03115
Serial          : 100000001f27d214
Model           : Raspberry Pi 4 Model B Rev 1.5
Throttled flag  : throttled=0x0
Camera          : supported=0 detected=0, libcamera interfaces=0

Videocore information
---------------------

Mar 24 2022 13:19:26
Copyright (c) 2012 Broadcom
version e5a963efa66a1974127860b42e913d2374139ff5 (clean) (release) (start)

alloc failures:     0
compactions:        0
legacy block fails: 0

Filesystem information
----------------------
Filesystem     1K-blocks    Used Available Use% Mounted on
/dev/root       14763032 7046812   7081520  50% /
devtmpfs          767392       0    767392   0% /dev
tmpfs             932256       0    932256   0% /dev/shm
tmpfs             372904    1184    371720   1% /run
tmpfs               5120       4      5116   1% /run/lock
/dev/mmcblk0p1    258095   50416    207679  20% /boot
tmpfs             186448       4    186444   1% /run/user/1000

Filename                                Type            Size            Used            Priority
/var/swap                               file            102396          0               -2

Package version information
---------------------------
raspberrypi-ui-mods:
  Installed: (none)
raspberrypi-sys-mods:
  Installed: 20220224
openbox:
  Installed: (none)
lxpanel:
  Installed: (none)
pcmanfm:
  Installed: (none)
rpd-plym-splash:
  Installed: (none)

Networking Information
----------------------

eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet x.x.x.x  netmask x.x.x.x
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 10  bytes 1558 (1.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 10  bytes 1558 (1.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        inet6 y::y.y.y.y  prefixlen 64  scopeid 0x20<link>
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 13786  bytes 2901827 (2.7 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1565  bytes 351206 (342.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

USB Information
---------------

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 3: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 3: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 3: Dev 4, If 2, Class=Human Interface Device, Driver=usbhid, 12M

config.txt
----------

arm_boost=1
arm_freq=1800
audio_pwm_mode=514
camera_auto_detect=-1
config_hdmi_boost=5
core_freq=500
core_freq_min=200
disable_commandline_tags=2
disable_l2cache=1
disable_overscan=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dvfs=3
enable_gic=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=500
gpu_freq_min=250
init_uart_clock=0x2dc6c00
lcd_framerate=60
mask_gpu_interrupt0=3072
mask_gpu_interrupt1=25635
max_framebuffers=2
over_voltage_avs=-20000
pause_burst_frames=1
program_serial_random=1
total_mem=2048
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_group:0=2
hdmi_mode:0=85
hdmi_pixel_freq_limit:0=0x11e1a300
hdmi_pixel_freq_limit:1=0x11e1a300
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=

cmdline.txt
-----------
coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1280x720M@60 smsc95xx.macaddr=E4:5F:01:C1:95:40 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 fbcon=map:2 root=PARTUUID=b487e78d-02 rootfstype=ext4 fsck.repair=yes rootwait splash

raspi-gpio settings
-------------------

BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT pull=UP
GPIO 1: level=1 fsel=0 func=INPUT pull=UP
GPIO 2: level=1 fsel=4 alt=0 func=SDA1 pull=UP
GPIO 3: level=1 fsel=4 alt=0 func=SCL1 pull=UP
GPIO 4: level=1 fsel=0 func=INPUT pull=UP
GPIO 5: level=1 fsel=0 func=INPUT pull=UP
GPIO 6: level=1 fsel=0 func=INPUT pull=UP
GPIO 7: level=1 fsel=1 func=OUTPUT pull=UP
GPIO 8: level=1 fsel=1 func=OUTPUT pull=UP
GPIO 9: level=0 fsel=4 alt=0 func=SPI0_MISO pull=DOWN
GPIO 10: level=0 fsel=4 alt=0 func=SPI0_MOSI pull=DOWN
GPIO 11: level=0 fsel=4 alt=0 func=SPI0_SCLK pull=DOWN
GPIO 12: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 13: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 14: level=1 fsel=0 func=INPUT pull=NONE
GPIO 15: level=1 fsel=0 func=INPUT pull=UP
GPIO 16: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 17: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 18: level=0 fsel=4 alt=0 func=PCM_CLK pull=DOWN
GPIO 19: level=0 fsel=4 alt=0 func=PCM_FS pull=DOWN
GPIO 20: level=0 fsel=4 alt=0 func=PCM_DIN pull=DOWN
GPIO 21: level=0 fsel=4 alt=0 func=PCM_DOUT pull=DOWN
GPIO 22: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 23: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 24: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 25: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 26: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 27: level=0 fsel=0 func=INPUT pull=DOWN
BANK1 (GPIO 28 to 45):
GPIO 28: level=1 fsel=2 alt=5 func=RGMII_MDIO pull=UP
GPIO 29: level=0 fsel=2 alt=5 func=RGMII_MDC pull=DOWN
GPIO 30: level=0 fsel=7 alt=3 func=CTS0 pull=UP
GPIO 31: level=0 fsel=7 alt=3 func=RTS0 pull=NONE
GPIO 32: level=1 fsel=7 alt=3 func=TXD0 pull=NONE
GPIO 33: level=1 fsel=7 alt=3 func=RXD0 pull=UP
GPIO 34: level=0 fsel=7 alt=3 func=SD1_CLK pull=NONE
GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD pull=UP
GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 pull=UP
GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 pull=UP
GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 pull=UP
GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 pull=UP
GPIO 40: level=0 fsel=4 alt=0 func=PWM1_0 pull=NONE
GPIO 41: level=0 fsel=4 alt=0 func=PWM1_1 pull=NONE
GPIO 42: level=0 fsel=1 func=OUTPUT pull=UP
GPIO 43: level=1 fsel=0 func=INPUT pull=UP
GPIO 44: level=1 fsel=0 func=INPUT pull=UP
GPIO 45: level=1 fsel=0 func=INPUT pull=UP
BANK2 (GPIO 46 to 53):
GPIO 46: level=0 fsel=0 func=INPUT pull=UP
GPIO 47: level=0 fsel=0 func=INPUT pull=UP
GPIO 48: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 49: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 50: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 51: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 52: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 53: level=0 fsel=0 func=INPUT pull=DOWN

vcdbg log messages
------------------

003507.973: arasan: arasan_emmc_open
003945.265: brfs: File read: /mfs/sd/config.txt
003946.291: brfs: File read: 2248 bytes
004063.865: HDMI1:EDID error reading EDID block 0 attempt 0
004069.888: HDMI1:EDID error reading EDID block 0 attempt 1
004075.913: HDMI1:EDID error reading EDID block 0 attempt 2
004081.935: HDMI1:EDID error reading EDID block 0 attempt 3
004087.960: HDMI1:EDID error reading EDID block 0 attempt 4
004093.983: HDMI1:EDID error reading EDID block 0 attempt 5
004100.008: HDMI1:EDID error reading EDID block 0 attempt 6
004106.030: HDMI1:EDID error reading EDID block 0 attempt 7
004112.054: HDMI1:EDID error reading EDID block 0 attempt 8
004118.077: HDMI1:EDID error reading EDID block 0 attempt 9
004119.091: HDMI1:EDID giving up on reading EDID block 0
004122.301: brfs: File read: /mfs/sd/config.txt
005239.089: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
005241.605: *** Restart logging
005241.627: brfs: File read: 2248 bytes
005305.812: hdmi: HDMI1:EDID error reading EDID block 0 attempt 0
005311.839: hdmi: HDMI1:EDID error reading EDID block 0 attempt 1
005317.863: hdmi: HDMI1:EDID error reading EDID block 0 attempt 2
005323.890: hdmi: HDMI1:EDID error reading EDID block 0 attempt 3
005329.915: hdmi: HDMI1:EDID error reading EDID block 0 attempt 4
005339.869: hdmi: HDMI1:EDID error reading EDID block 0 attempt 5
005348.703: hdmi: HDMI1:EDID error reading EDID block 0 attempt 6
005354.757: hdmi: HDMI1:EDID error reading EDID block 0 attempt 7
005360.808: hdmi: HDMI1:EDID error reading EDID block 0 attempt 8
005366.860: hdmi: HDMI1:EDID error reading EDID block 0 attempt 9
005367.893: hdmi: HDMI1:EDID giving up on reading EDID block 0
005372.988: hdmi: HDMI1:EDID error reading EDID block 0 attempt 0
005379.040: hdmi: HDMI1:EDID error reading EDID block 0 attempt 1
005385.092: hdmi: HDMI1:EDID error reading EDID block 0 attempt 2
005391.144: hdmi: HDMI1:EDID error reading EDID block 0 attempt 3
005397.203: hdmi: HDMI1:EDID error reading EDID block 0 attempt 4
005403.256: hdmi: HDMI1:EDID error reading EDID block 0 attempt 5
005409.305: hdmi: HDMI1:EDID error reading EDID block 0 attempt 6
005415.358: hdmi: HDMI1:EDID error reading EDID block 0 attempt 7
005421.409: hdmi: HDMI1:EDID error reading EDID block 0 attempt 8
005427.461: hdmi: HDMI1:EDID error reading EDID block 0 attempt 9
005428.494: hdmi: HDMI1:EDID giving up on reading EDID block 0
005428.533: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
005428.563: HDMI0: hdmi_pixel_encoding: 300000000
005428.589: HDMI1: hdmi_pixel_encoding: 300000000
005434.307: dtb_file 'bcm2711-rpi-4-b.dtb'
005445.938: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb
005445.969: Loading 'bcm2711-rpi-4-b.dtb' to 0x100 size 0xc983
005478.598: brfs: File read: 51587 bytes
005499.460: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
005677.728: brfs: File read: 1783 bytes
005683.088: brfs: File read: /mfs/sd/config.txt
005683.838: dtparam: i2c_arm=on
005705.727: dtparam: i2s=on
005726.100: dtparam: spi=on
005747.798: brfs: File read: 2248 bytes
005775.123: brfs: File read: /mfs/sd/overlays/vc4-kms-v3d-pi4.dtbo
005936.576: Loaded overlay 'vc4-kms-v3d'
006331.162: brfs: File read: 3823 bytes
006349.956: brfs: File read: /mfs/sd/overlays/rpi-backlight.dtbo
006365.930: Loaded overlay 'rpi-backlight'
006413.109: brfs: File read: 489 bytes
006416.366: brfs: File read: /mfs/sd/cmdline.txt
006416.437: Read command line from file 'cmdline.txt':
006416.460: 'console=serial0,115200 console=tty1 fbcon=map:2 root=PARTUUID=b487e78d-02 rootfstype=ext4 fsck.repair=yes rootwait splash'
006725.056: brfs: File read: 122 bytes
008135.812: brfs: File read: /mfs/sd/kernel7l.img
008135.850: Loading 'kernel7l.img' to 0x8000 size 0x6af760
008135.897: Device tree loaded to 0x2eff2f00 (size 0xd0b8)
008166.434: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
010873.107: vchiq_core: vchiq_init_state: slot_zero = 0xdad80000, is_master = 1
010883.014: TV service:host side not connected, dropping notification 0x00000002, 0x00000002, 0x00000055

dmesg log
---------

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.15.32-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1538 SMP Thu Mar 31 19:39:41 BST 2022
[    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.5
[    0.000000] random: fast init done
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000]   Normal   empty
[    0.000000]   HighMem  [mem 0x0000000030000000-0x000000007fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000037ffffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[    0.000000] percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536
[    0.000000] pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 489792
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1280x720M@60 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 fbcon=map:2 root=PARTUUID=b487e78d-02 rootfstype=ext4 fsck.repair=yes rootwait splash
[    0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000015a00000-0x0000000019a00000] (64MB)
[    0.000000] Memory: 1534784K/1966080K available (10240K kernel code, 1390K rwdata, 3292K rodata, 2048K init, 590K bss, 103616K reserved, 327680K cma-reserved, 1179648K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 35355 entries in 104 pages
[    0.000000] ftrace: allocated 104 pages with 3 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25)
[    0.000000] random: get_random_bytes called from start_kernel+0x574/0x758 with crng_init=1
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000023] Switching to timer-based delay loop, resolution 18ns
[    0.000322] Console: colour dummy device 80x30
[    0.001064] printk: console [tty1] enabled
[    0.001143] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[    0.001195] pid_max: default: 32768 minimum: 301
[    0.001351] LSM: Security Framework initializing
[    0.001521] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001570] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.003149] cgroup: Disabling memory control group subsystem
[    0.003411] CPU: Testing write buffer coherency: ok
[    0.003482] CPU0: Spectre BHB: using loop workaround
[    0.003944] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.005191] Setting up static identity map for 0x200000 - 0x20003c
[    0.005417] rcu: Hierarchical SRCU implementation.
[    0.006392] smp: Bringing up secondary CPUs ...
[    0.007608] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.007625] CPU1: Spectre BHB: using loop workaround
[    0.008974] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.008991] CPU2: Spectre BHB: using loop workaround
[    0.010383] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.010401] CPU3: Spectre BHB: using loop workaround
[    0.010588] smp: Brought up 1 node, 4 CPUs
[    0.010625] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[    0.010658] CPU: All CPU(s) started in HYP mode.
[    0.010685] CPU: Virtualization extensions available.
[    0.011483] devtmpfs: initialized
[    0.026833] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[    0.027103] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.027161] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.036984] pinctrl core: initialized pinctrl subsystem
[    0.038281] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.042906] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.043739] audit: initializing netlink subsys (disabled)
[    0.044012] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.044631] thermal_sys: Registered thermal governor 'step_wise'
[    0.045380] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.045440] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.045863] Serial: AMBA PL011 UART driver
[    0.060469] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.100061] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-03-24T13:19:26, variant start
[    0.110077] raspberrypi-firmware soc:firmware: Firmware hash is e5a963efa66a1974127860b42e913d2374139ff5
[    0.168603] Kprobes globally optimized
[    0.174261] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.178947] vgaarb: loaded
[    0.179462] SCSI subsystem initialized
[    0.179719] usbcore: registered new interface driver usbfs
[    0.179810] usbcore: registered new interface driver hub
[    0.179910] usbcore: registered new device driver usb
[    0.180426] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.180924] pps_core: LinuxPPS API ver. 1 registered
[    0.180954] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.181004] PTP clock support registered
[    0.182682] clocksource: Switched to clocksource arch_sys_counter
[    0.263447] VFS: Disk quotas dquot_6.6.0
[    0.263577] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.263780] FS-Cache: Loaded
[    0.264007] CacheFiles: Loaded
[    0.265137] simple-framebuffer 3e876000.framebuffer: framebuffer at 0x3e876000, 0x384000 bytes
[    0.265182] simple-framebuffer 3e876000.framebuffer: format=a8r8g8b8, mode=1280x720x32, linelength=5120
[    0.265444] simple-framebuffer 3e876000.framebuffer: fb0: simplefb registered!
[    0.275699] NET: Registered PF_INET protocol family
[    0.275967] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.277585] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.277643] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.277729] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.277822] TCP: Hash tables configured (established 8192 bind 8192)
[    0.278015] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.278072] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.278365] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.283587] RPC: Registered named UNIX socket transport module.
[    0.283624] RPC: Registered udp transport module.
[    0.283651] RPC: Registered tcp transport module.
[    0.283678] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.283716] PCI: CLS 0 bytes, default 64
[    1.135429] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    1.138142] Initialise system trusted keyrings
[    1.138432] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.147581] zbud: loaded
[    1.149607] FS-Cache: Netfs 'nfs' registered for caching
[    1.150520] NFS: Registering the id_resolver key type
[    1.150586] Key type id_resolver registered
[    1.150615] Key type id_legacy registered
[    1.150747] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.150780] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.151926] Key type asymmetric registered
[    1.151959] Asymmetric key parser 'x509' registered
[    1.152202] bounce: pool size: 64 pages
[    1.152280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.152530] io scheduler mq-deadline registered
[    1.152562] io scheduler kyber registered
[    1.162076] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    1.162144] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    1.162259] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    1.162384] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x007fffffff -> 0x0400000000
[    1.224788] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    1.225197] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    1.225235] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.225271] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    1.225385] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    1.225648] pci 0000:00:00.0: PME# supported from D0 D3hot
[    1.229419] PCI: bus0: Fast back to back transfers disabled
[    1.229459] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.229853] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    1.229999] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    1.230447] pci 0000:01:00.0: PME# supported from D0 D3hot
[    1.234277] PCI: bus1: Fast back to back transfers disabled
[    1.234314] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.234373] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    1.234414] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    1.234519] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.234559] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    1.234993] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[    1.235244] pcieport 0000:00:00.0: PME: Signaling with IRQ 79
[    1.246675] iproc-rng200 fe104000.rng: hwrng registered
[    1.247093] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    1.248780] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    1.262117] brd: module loaded
[    1.272787] loop: module loaded
[    1.273691] Loading iSCSI transport class v2.0-870.
[    1.279026] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.372876] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    1.374149] usbcore: registered new interface driver r8152
[    1.374239] usbcore: registered new interface driver lan78xx
[    1.374318] usbcore: registered new interface driver smsc95xx
[    1.423969] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.424023] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    1.429706] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00003c0000000890
[    1.431118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.431166] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.431204] usb usb1: Product: xHCI Host Controller
[    1.431235] usb usb1: Manufacturer: Linux 5.15.32-v7l+ xhci-hcd
[    1.431267] usb usb1: SerialNumber: 0000:01:00.0
[    1.432039] hub 1-0:1.0: USB hub found
[    1.432153] hub 1-0:1.0: 1 port detected
[    1.432978] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.433022] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    1.433069] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    1.433548] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    1.433593] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.433630] usb usb2: Product: xHCI Host Controller
[    1.433661] usb usb2: Manufacturer: Linux 5.15.32-v7l+ xhci-hcd
[    1.433692] usb usb2: SerialNumber: 0000:01:00.0
[    1.434437] hub 2-0:1.0: USB hub found
[    1.434525] hub 2-0:1.0: 4 ports detected
[    1.436431] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.436845] dwc_otg: FIQ enabled
[    1.436859] dwc_otg: NAK holdoff enabled
[    1.436873] dwc_otg: FIQ split-transaction FSM enabled
[    1.436892] Module dwc_common_port init
[    1.437350] usbcore: registered new interface driver uas
[    1.437475] usbcore: registered new interface driver usb-storage
[    1.437715] mousedev: PS/2 mouse device common for all mice
[    1.443456] sdhci: Secure Digital Host Controller Interface driver
[    1.443494] sdhci: Copyright(c) Pierre Ossman
[    1.444311] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.448277] ledtrig-cpu: registered to indicate activity on CPUs
[    1.448635] hid: raw HID events driver (C) Jiri Kosina
[    1.448849] usbcore: registered new interface driver usbhid
[    1.448880] usbhid: USB HID core driver
[    1.455097] Initializing XFRM netlink socket
[    1.455163] NET: Registered PF_PACKET protocol family
[    1.455296] Key type dns_resolver registered
[    1.455727] Registering SWP/SWPB emulation handler
[    1.456566] registered taskstats version 1
[    1.456613] Loading compiled-in X.509 certificates
[    1.457487] Key type ._fscrypt registered
[    1.457520] Key type .fscrypt registered
[    1.457547] Key type fscrypt-provisioning registered
[    1.469957] uart-pl011 fe201000.serial: there is not valid maps for state default
[    1.470317] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    1.470486] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
[    1.479822] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.480327] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    1.481642] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    1.481681] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    1.512216] of_cfs_init
[    1.512476] of_cfs_init: OK
[    1.548609] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[    1.549103] Waiting for root device PARTUUID=b487e78d-02...
[    1.648703] mmc0: new ultra high speed DDR50 SDHC card at address 0007
[    1.650217] mmcblk0: mmc0:0007 SD16G 14.6 GiB
[    1.655914] mmc1: new high speed SDIO card at address 0001
[    1.657048]  mmcblk0: p1 p2
[    1.657638] mmcblk0: mmc0:0007 SD16G 14.6 GiB
[    1.676022] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    1.676139] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.681895] devtmpfs: mounted
[    1.693402] Freeing unused kernel image (initmem) memory: 2048K
[    1.703024] Run /sbin/init as init process
[    1.703055]   with arguments:
[    1.703068]     /sbin/init
[    1.703081]     splash
[    1.703094]   with environment:
[    1.703106]     HOME=/
[    1.703119]     TERM=linux
[    1.712721] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.895370] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    1.895432] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.895470] usb 1-1: Product: USB2.0 Hub
[    1.897654] hub 1-1:1.0: USB hub found
[    1.897991] hub 1-1:1.0: 4 ports detected
[    2.162997] systemd[1]: System time before build time, advancing clock.
[    2.232760] usb 1-1.2: new full-speed USB device number 3 using xhci_hcd
[    2.284708] NET: Registered PF_INET6 protocol family
[    2.286506] Segment Routing with IPv6
[    2.286583] In-situ OAM (IOAM) with IPv6
[    2.349788] systemd[1]: systemd 247.3-7+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    2.350729] systemd[1]: Detected architecture arm.
[    2.359387] systemd[1]: Set hostname to <gaia>.
[    2.365016] usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
[    2.368780] usb 1-1.2: New USB device found, idVendor=0483, idProduct=5750, bcdDevice= 2.00
[    2.368833] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.368872] usb 1-1.2: Product: MPI7003
[    2.368903] usb 1-1.2: Manufacturer: QDtech
[    2.368933] usb 1-1.2: SerialNumber: MPI7003അЉơƅ∉ʡ䈉
[    2.385190] input: QDtech MPI7003 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0483:5750.0001/input/input0
[    2.385793] hid-generic 0003:0483:5750.0001: input,hidraw0: USB HID v1.01 Device [QDtech MPI7003] on usb-0000:01:00.0-1.2/input0
[    2.482862] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd
[    2.626046] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[    2.626110] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.626151] usb 1-1.3: Product: USB Receiver
[    2.626183] usb 1-1.3: Manufacturer: Logitech
[    2.639177] input: Logitech USB Receiver as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C52B.0002/input/input1
[    2.703697] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input0
[    2.715949] input: Logitech USB Receiver Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0003/input/input2
[    2.716583] input: Logitech USB Receiver Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0003/input/input3
[    2.783126] input: Logitech USB Receiver System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0003/input/input4
[    2.783732] hid-generic 0003:046D:C52B.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input1
[    2.793062] hid-generic 0003:046D:C52B.0004: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2
[    3.141247] systemd[1]: /etc/systemd/system/mauveine-clock.service:18: Unknown key name 'ControlGroup' in section 'Service', ignoring.
[    3.265519] systemd[1]: Queued start job for default target Multi-User System.
[    3.266929] random: systemd: uninitialized urandom read (16 bytes read)
[    3.271498] systemd[1]: Created slice system-getty.slice.
[    3.272343] random: systemd: uninitialized urandom read (16 bytes read)
[    3.273552] systemd[1]: Created slice system-modprobe.slice.
[    3.274024] random: systemd: uninitialized urandom read (16 bytes read)
[    3.275046] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.276293] systemd[1]: Created slice User and Session Slice.
[    3.277144] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.277949] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.279417] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.280077] systemd[1]: Reached target Local Encrypted Volumes.
[    3.280750] systemd[1]: Reached target Paths.
[    3.281332] systemd[1]: Reached target Slices.
[    3.281842] systemd[1]: Reached target Swap.
[    3.288631] systemd[1]: Listening on Syslog Socket.
[    3.289825] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.290604] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.292078] systemd[1]: Listening on Journal Audit Socket.
[    3.293362] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.294727] systemd[1]: Listening on Journal Socket.
[    3.296168] systemd[1]: Listening on udev Control Socket.
[    3.297344] systemd[1]: Listening on udev Kernel Socket.
[    3.298510] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    3.304314] systemd[1]: Mounting POSIX Message Queue File System...
[    3.311068] systemd[1]: Mounting RPC Pipe File System...
[    3.319030] systemd[1]: Mounting Kernel Debug File System...
[    3.327681] systemd[1]: Mounting Kernel Trace File System...
[    3.328902] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[    3.340770] systemd[1]: Starting Restore / save the current clock...
[    3.352198] systemd[1]: Starting Set the console keyboard layout...
[    3.360804] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    3.369460] systemd[1]: Starting Load Kernel Module configfs...
[    3.377663] systemd[1]: Starting Load Kernel Module drm...
[    3.386998] systemd[1]: Starting Load Kernel Module fuse...
[    3.396869] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    3.406073] systemd[1]: Starting File System Check on Root Device...
[    3.418740] systemd[1]: Starting Journal Service...
[    3.438858] systemd[1]: Starting Load Kernel Modules...
[    3.448748] systemd[1]: Starting Coldplug All udev Devices...
[    3.450661] fuse: init (API version 7.34)
[    3.471180] systemd[1]: Mounted POSIX Message Queue File System.
[    3.472573] systemd[1]: Mounted RPC Pipe File System.
[    3.474117] systemd[1]: Mounted Kernel Debug File System.
[    3.475526] systemd[1]: Mounted Kernel Trace File System.
[    3.479313] systemd[1]: Finished Restore / save the current clock.
[    3.483776] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    3.486382] systemd[1]: modprobe@configfs.service: Succeeded.
[    3.488226] systemd[1]: Finished Load Kernel Module configfs.
[    3.490984] systemd[1]: modprobe@fuse.service: Succeeded.
[    3.502054] systemd[1]: Finished Load Kernel Module fuse.
[    3.518939] systemd[1]: Mounting FUSE Control File System...
[    3.526659] systemd[1]: Mounting Kernel Configuration File System...
[    3.531094] systemd[1]: modprobe@drm.service: Succeeded.
[    3.533082] systemd[1]: Finished Load Kernel Module drm.
[    3.545547] systemd[1]: Started File System Check Daemon to report status.
[    3.547714] i2c_dev: i2c /dev entries driver
[    3.590060] systemd[1]: Finished Load Kernel Modules.
[    3.595540] systemd[1]: Mounted FUSE Control File System.
[    3.596526] systemd[1]: Mounted Kernel Configuration File System.
[    3.611103] systemd[1]: Starting Apply Kernel Variables...
[    3.693420] systemd[1]: Finished File System Check on Root Device.
[    3.700087] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.704315] systemd[1]: Finished Apply Kernel Variables.
[    3.850515] systemd[1]: Started Journal Service.
[    3.907435] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
[    3.979674] systemd-journald[133]: Received client request to flush runtime journal.
[    4.040339] systemd-journald[133]: File /var/log/journal/d65570221b8548fbb9da81007d2a5499/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    7.530215] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[    7.537003] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[    7.612855] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[    7.630690] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[    7.725116] mc: Linux media interface: v0.10
[    7.793295] videodev: Linux video capture interface: v2.00
[    7.820388] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    7.825308] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    7.839982] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    7.844304] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    7.897388] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    7.897430] [vc_sm_connected_init]: start
[    7.929139] checking generic (3e876000 384000) vs hw (0 ffffffffffffffff)
[    7.929168] fb0: switching to vc4 from simple
[    7.929607] [vc_sm_connected_init]: installed successfully
[    7.934342] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    7.939370] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    7.948700] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    7.955118] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    7.956598] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    7.977499] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    7.980972] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    7.992309] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    7.992441] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    7.993117] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    7.993649] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    7.993679] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    7.993713] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    7.993765] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    7.993789] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    7.999288] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[    7.999988] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[    8.000623] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[    8.001159] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[    8.001190] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    8.001215] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    8.001237] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    8.001260] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    8.001637] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    8.008526] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    8.109788] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    8.109842] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    8.118189] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    8.118238] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    8.132936] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    8.132986] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    8.145967] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[    8.146026] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[    8.154049] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[    8.154099] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[    8.154944] brcmstb-i2c fef04500.i2c:  @97500hz registered in polling mode
[    8.162581] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    8.167433] random: crng init done
[    8.167449] random: 7 urandom warning(s) missed due to ratelimiting
[    8.169244] Registered IR keymap rc-cec
[    8.169626] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[    8.170220] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input6
[    8.178416] brcmstb-i2c fef09500.i2c:  @97500hz registered in polling mode
[    8.292884] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    8.311853] Registered IR keymap rc-cec
[    8.312245] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[    8.313057] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input7
[    9.658512] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    9.660297] Registered IR keymap rc-cec
[    9.660512] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[    9.660755] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input8
[    9.806539] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    9.809128] Registered IR keymap rc-cec
[    9.809486] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[    9.810128] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input9
[    9.915812] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.942396] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[    9.946866] Registered IR keymap rc-cec
[    9.952926] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[    9.953550] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input10
[    9.962445] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.981452] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[    9.987900] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[   10.005364] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[   10.005891] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[   10.006350] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[   10.006742] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[   10.007150] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[   10.007481] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[   10.007883] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[   10.071041] brcmfmac: F1 signature read @0x18000000=0x15264345
[   10.091009] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   10.099432] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
[   10.116022] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[   10.153834] usbcore: registered new interface driver brcmfmac
[   10.211167] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[   10.370018] input: QDtech MPI7003 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0483:5750.0001/input/input11
[   10.374813] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   10.374984] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   10.385930] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov  1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[   10.672229] hid-multitouch 0003:0483:5750.0001: input,hidraw0: USB HID v1.01 Device [QDtech MPI7003] on usb-0000:01:00.0-1.2/input0
[   10.685410] logitech-djreceiver 0003:046D:C52B.0004: hiddev97,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2
[   10.829996] input: Logitech Wireless Device PID:4069 Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0004/0003:046D:4069.0005/input/input12
[   10.905660] input: Logitech Wireless Device PID:4069 Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0004/0003:046D:4069.0005/input/input13
[   10.906337] hid-generic 0003:046D:4069.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4069] on usb-0000:01:00.0-1.3/input2:1
[   11.388548] uart-pl011 fe201000.serial: no DMA platform data
[   11.616715] 8021q: 802.1Q VLAN Support v1.8
[   11.684083] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
[   12.077640] input: Logitech MX Master 2S as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0004/0003:046D:4069.0005/input/input17
[   12.091282] logitech-hidpp-device 0003:046D:4069.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:01:00.0-1.3/input2:1
[   12.261685] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   12.763121] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[   12.765297] bcmgenet fd580000.ethernet eth0: Link is Down
[   17.923340] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   18.373786] Bluetooth: Core ver 2.22
[   18.373849] NET: Registered PF_BLUETOOTH protocol family
[   18.373855] Bluetooth: HCI device and connection manager initialized
[   18.373869] Bluetooth: HCI socket layer initialized
[   18.373877] Bluetooth: L2CAP socket layer initialized
[   18.373891] Bluetooth: SCO socket layer initialized
[   18.387475] Bluetooth: HCI UART driver ver 2.3
[   18.387488] Bluetooth: HCI UART protocol H4 registered
[   18.387535] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   18.387708] Bluetooth: HCI UART protocol Broadcom registered
[   18.913378] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.913391] Bluetooth: BNEP filters: protocol multicast
[   18.913403] Bluetooth: BNEP socket layer initialized
[   18.925357] NET: Registered PF_ALG protocol family
[   18.948435] cryptd: max_cpu_qlen set to 1000
[   31.832693] cam-dummy-reg: disabling

Logs

No response

Additional context

Monitor EDID hexdump
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Monitor EDID formatted dump

Section "Monitor"
        Identifier "MPI7002"
        ModelName "MPI7002"
        VendorName "MPI"
        # Monitor Manufactured week 1 of 2007
        # EDID version 1.3
        # Digital Display
        DisplaySize 180 130
        Gamma 1.00
        Option "DPMS" "false"
        #Not giving standard mode: 800x450, 60Hz
        #Not giving standard mode: 1024x576, 60Hz
        #Not giving standard mode: 1152x648, 60Hz
        #Not giving standard mode: 1280x720, 60Hz
        #Not giving standard mode: 1360x765, 60Hz
        #Not giving standard mode: 1440x810, 60Hz
        #Not giving standard mode: 1600x900, 60Hz
        #Not giving standard mode: 1920x1080, 60Hz

        #Extension block found. Parsing...
        Modeline        "Mode 1"
        Modeline        "Mode 0" -hsync +vsync
        Option "PreferredMode" "Mode 1"
EndSection

/boot/config.txt

# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details

# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1

# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16

# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720

# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1

# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=2
#hdmi_mode=85

# uncomment to force a HDMI mode rather than DVI. This can make xaudio work in
# DMT (computer monitor) modes
#hdmi_drive=1

# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4

# uncomment for composite PAL
#sdtv_mode=2

#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800

# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=spi=on

# Uncomment this to enable infrared communication.
#dtoverlay=gpio-ir,gpio_pin=17
#dtoverlay=gpio-ir-tx,gpio_pin=18

# Additional overlays and parameters are documented /boot/overlays/README

# Enable audio (loads snd_bcm2835)
#dtparam=audio=on

# Add Pimoroni audio DAC
#dtoverlay=hifiberry-dac
#gpio=25=op,dh
#dtdebug=1
#force_eeprom_read=0

# Automatically load overlays for detected cameras
#camera_auto_detect=1

# Automatically load overlays for detected DSI displays
#display_auto_detect=1

# Enable DRM VC4 V3D driver
dtoverlay=vc4-kms-v3d
dtoverlay=rpi-backlight
#dtoverlay=vc4-fkms-v3d,audio=off
max_framebuffers=2

# Disable compensation for displays with overscan
disable_overscan=1

[cm4]
# Enable host mode on the 2711 built-in XHCI USB controller.
# This line should be removed if the legacy DWC2 controller is required
# (e.g. for USB device mode) or if USB support is not required.
otg_mode=1

[all]

[pi4]
# Run as fast as firmware / board allows
arm_boost=1

[all]
gpu_mem=128
sesquipedality commented 2 years ago

Closing this because it turned out to be a hardware issue unrelated to the kernel.