search

raspberrypi / linux

Kernel source tree for Raspberry Pi-provided kernel builds. Issues unrelated to the linux kernel should be posted on the community forum at https://forums.raspberrypi.com/
Other
10.91k stars 4.9k forks source link

RPi4 DSI interface #5174

Open billru05 opened 1 year ago

billru05 commented 1 year ago

Describe the bug

I am needing help with a RPi4 on getting the DSI interface activated so I can use a (OSOYOO 5 Inch DSI Touch Sceen) I am using a (Raspberry Pi Compute Module 4, 1GB, 16GB - CM4001016) its attached to a (Waveshare Mini Base Board for Raspberry Pi Compute Module ( I have tried both 4CM4-IO-BASE-A and 4CM4-IO-BASE-B). I have tried the 32bit & 64 bitSystem: 32-bit Kernel version:5.15 Debian version: 11 (bullseye) desktop and lite version also tried the Raspberry Pi OS (Legacy). The screen dose not boot its stays black as its not connected, I tried the screen on a RPI3 B+ and it boots correctly but for some reason I can not figuare out how to activate the DSI on the RPi4

Steps to reproduce the behaviour

flashing, boot Pi without anything connected, once on network, shut down, connect DSI screen then reboot but the DSI screen never boots

Device (s)

Raspberry Pi CM4

System

Raspberry Pi OS with desktop

Release date: September 6th 2022
System: 64-bit
Kernel version: 5.15
Debian version: 11 (bullseye)

Logs

[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.15.61-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1579 SMP Fri Aug 26 11:13:03 BST 2022 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi Compute Module 4 Rev 1.1 [ 0.000000] random: crng init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000003b3fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536 [ 0.000000] pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240960 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:C3:0E:5B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=694778cd-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 679916K/970752K available (10240K kernel code, 1385K rwdata, 3304K rodata, 2048K init, 592K bss, 28692K reserved, 262144K cma-reserved, 184320K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 35501 entries in 105 pages [ 0.000000] ftrace: allocated 105 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25) [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000019] Switching to timer-based delay loop, resolution 18ns [ 0.000354] Console: colour dummy device 80x30 [ 0.000415] printk: console [tty1] enabled [ 0.000478] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.000510] pid_max: default: 32768 minimum: 301 [ 0.000649] LSM: Security Framework initializing [ 0.000851] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000880] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002407] cgroup: Disabling memory control group subsystem [ 0.002642] CPU: Testing write buffer coherency: ok [ 0.002703] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.003140] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004491] Setting up static identity map for 0x200000 - 0x20003c [ 0.004694] rcu: Hierarchical SRCU implementation. [ 0.005682] smp: Bringing up secondary CPUs ... [ 0.006828] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.008126] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.009394] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.009564] smp: Brought up 1 node, 4 CPUs [ 0.009586] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.009605] CPU: All CPU(s) started in HYP mode. [ 0.009618] CPU: Virtualization extensions available. [ 0.010451] devtmpfs: initialized [ 0.025458] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.025676] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025708] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.033515] pinctrl core: initialized pinctrl subsystem [ 0.034762] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.039221] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.040065] audit: initializing netlink subsys (disabled) [ 0.040327] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.040974] thermal_sys: Registered thermal governor 'step_wise' [ 0.041756] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.041777] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.042160] Serial: AMBA PL011 UART driver [ 0.055733] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.090048] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-08-26T14:03:16, variant start [ 0.100064] raspberrypi-firmware soc:firmware: Firmware hash is 102f1e848393c2112206fadffaaf86db04e98326 [ 0.159689] Kprobes globally optimized [ 0.165652] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.170694] vgaarb: loaded [ 0.171177] SCSI subsystem initialized [ 0.171412] usbcore: registered new interface driver usbfs [ 0.171486] usbcore: registered new interface driver hub [ 0.171558] usbcore: registered new device driver usb [ 0.171952] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.172131] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 0.172460] pps_core: LinuxPPS API ver. 1 registered [ 0.172475] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.172503] PTP clock support registered [ 0.174187] clocksource: Switched to clocksource arch_sys_counter [ 0.254914] VFS: Disk quotas dquot_6.6.0 [ 0.255016] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.255197] FS-Cache: Loaded [ 0.255397] CacheFiles: Loaded [ 0.265842] NET: Registered PF_INET protocol family [ 0.266089] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.267664] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.267697] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.267722] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.267787] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.267855] TCP: Hash tables configured (established 8192 bind 8192) [ 0.268007] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.268045] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.268296] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.275092] RPC: Registered named UNIX socket transport module. [ 0.275109] RPC: Registered udp transport module. [ 0.275123] RPC: Registered tcp transport module. [ 0.275137] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.275159] PCI: CLS 0 bytes, default 64 [ 1.321898] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 1.324550] Initialise system trusted keyrings [ 1.324839] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.333828] zbud: loaded [ 1.335788] FS-Cache: Netfs 'nfs' registered for caching [ 1.336705] NFS: Registering the id_resolver key type [ 1.336747] Key type id_resolver registered [ 1.336762] Key type id_legacy registered [ 1.336884] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.336900] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.338016] Key type asymmetric registered [ 1.338033] Asymmetric key parser 'x509' registered [ 1.338261] bounce: pool size: 64 pages [ 1.338330] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.338564] io scheduler mq-deadline registered [ 1.338581] io scheduler kyber registered [ 1.347423] gpio-507 (ant1): hogged as output/high [ 1.348865] gpio-511 (ant2): hogged as output/low [ 1.350524] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.350563] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.350657] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.350749] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x003fffffff -> 0x0400000000 [ 1.944212] brcm-pcie fd500000.pcie: link down [ 1.956781] iproc-rng200 fe104000.rng: hwrng registered [ 1.957158] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.958675] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.971403] brd: module loaded [ 1.981522] loop: module loaded [ 1.982253] Loading iSCSI transport class v2.0-870. [ 1.987500] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 2.084352] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 2.085592] usbcore: registered new interface driver r8152 [ 2.085664] usbcore: registered new interface driver lan78xx [ 2.085734] usbcore: registered new interface driver smsc95xx [ 2.111783] xhci-hcd fe9c0000.xhci: xHCI Host Controller [ 2.111821] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 1 [ 2.114300] xhci-hcd fe9c0000.xhci: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010 [ 2.114394] xhci-hcd fe9c0000.xhci: irq 75, io mem 0xfe9c0000 [ 2.114687] xhci-hcd fe9c0000.xhci: xHCI Host Controller [ 2.114714] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 2 [ 2.114740] xhci-hcd fe9c0000.xhci: Host supports USB 3.0 SuperSpeed [ 2.115107] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.115131] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.115150] usb usb1: Product: xHCI Host Controller [ 2.115168] usb usb1: Manufacturer: Linux 5.15.61-v7l+ xhci-hcd [ 2.115184] usb usb1: SerialNumber: fe9c0000.xhci [ 2.115848] hub 1-0:1.0: USB hub found [ 2.115917] hub 1-0:1.0: 1 port detected [ 2.116573] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.116861] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 2.116883] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.116902] usb usb2: Product: xHCI Host Controller [ 2.116918] usb usb2: Manufacturer: Linux 5.15.61-v7l+ xhci-hcd [ 2.116934] usb usb2: SerialNumber: fe9c0000.xhci [ 2.117572] hub 2-0:1.0: USB hub found [ 2.117639] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 2.118175] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.118569] dwc_otg: FIQ enabled [ 2.118583] dwc_otg: NAK holdoff enabled [ 2.118596] dwc_otg: FIQ split-transaction FSM enabled [ 2.118614] Module dwc_common_port init [ 2.119077] usbcore: registered new interface driver uas [ 2.119188] usbcore: registered new interface driver usb-storage [ 2.119373] mousedev: PS/2 mouse device common for all mice [ 2.124569] sdhci: Secure Digital Host Controller Interface driver [ 2.124585] sdhci: Copyright(c) Pierre Ossman [ 2.125298] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.129277] ledtrig-cpu: registered to indicate activity on CPUs [ 2.129565] hid: raw HID events driver (C) Jiri Kosina [ 2.129733] usbcore: registered new interface driver usbhid [ 2.129748] usbhid: USB HID core driver [ 2.136085] Initializing XFRM netlink socket [ 2.136128] NET: Registered PF_PACKET protocol family [ 2.136245] Key type dns_resolver registered [ 2.136712] Registering SWP/SWPB emulation handler [ 2.137482] registered taskstats version 1 [ 2.137512] Loading compiled-in X.509 certificates [ 2.138368] Key type ._fscrypt registered [ 2.138385] Key type .fscrypt registered [ 2.138399] Key type fscrypt-provisioning registered [ 2.152570] uart-pl011 fe201000.serial: there is not valid maps for state default [ 2.152897] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 2.153043] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2 [ 2.162351] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 2.162834] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 2.164110] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 2.164131] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 2.194615] of_cfs_init [ 2.194845] of_cfs_init: OK [ 2.230142] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 2.230462] Waiting for root device PARTUUID=694778cd-02... [ 2.289826] mmc1: new high speed SDIO card at address 0001 [ 2.299515] mmc0: new DDR MMC card at address 0001 [ 2.300441] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB [ 2.303477] mmcblk0: p1 p2 [ 2.304034] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB [ 2.304613] mmcblk0boot0: mmc0:0001 AJTD4R 4.00 MiB [ 2.307101] mmcblk0boot1: mmc0:0001 AJTD4R 4.00 MiB [ 2.309267] mmcblk0rpmb: mmc0:0001 AJTD4R 4.00 MiB, chardev (242:0) [ 2.318801] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.318822] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 2.361681] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [ 2.365094] EXT4-fs (mmcblk0p2): 1 truncate cleaned up [ 2.365122] EXT4-fs (mmcblk0p2): recovery complete [ 2.368256] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 2.368349] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.371747] devtmpfs: mounted [ 2.382861] Freeing unused kernel image (initmem) memory: 2048K [ 2.404246] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.404650] Run /sbin/init as init process [ 2.404673] with arguments: [ 2.404686] /sbin/init [ 2.404699] splash [ 2.404712] with environment: [ 2.404724] HOME=/ [ 2.404736] TERM=linux [ 2.584647] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 2.584680] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.584700] usb 1-1: Product: USB 2.0 Hub [ 2.615354] systemd[1]: System time before build time, advancing clock. [ 2.627079] hub 1-1:1.0: USB hub found [ 2.627196] hub 1-1:1.0: 4 ports detected [ 2.795994] NET: Registered PF_INET6 protocol family [ 2.797642] Segment Routing with IPv6 [ 2.797687] In-situ OAM (IOAM) with IPv6 [ 2.858056] systemd[1]: systemd 247.3-7+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.858950] systemd[1]: Detected architecture arm. [ 2.860325] systemd[1]: Set hostname to . [ 3.542453] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 3.719184] systemd[1]: Queued start job for default target Graphical Interface. [ 3.723889] systemd[1]: Created slice system-getty.slice. [ 3.725380] systemd[1]: Created slice system-modprobe.slice. [ 3.726395] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.727298] systemd[1]: Created slice User and Session Slice. [ 3.727867] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.729017] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.729657] systemd[1]: Reached target Slices. [ 3.729856] systemd[1]: Reached target Swap. [ 3.730949] systemd[1]: Listening on Syslog Socket. [ 3.731726] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.732117] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.733271] systemd[1]: Listening on Journal Audit Socket. [ 3.734036] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.735089] systemd[1]: Listening on Journal Socket. [ 3.738139] systemd[1]: Listening on udev Control Socket. [ 3.738974] systemd[1]: Listening on udev Kernel Socket. [ 3.739972] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 3.745320] systemd[1]: Mounting POSIX Message Queue File System... [ 3.751284] systemd[1]: Mounting RPC Pipe File System... [ 3.758252] systemd[1]: Mounting Kernel Debug File System... [ 3.765550] systemd[1]: Mounting Kernel Trace File System... [ 3.766304] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 3.775093] systemd[1]: Starting Restore / save the current clock... [ 3.782844] systemd[1]: Starting Set the console keyboard layout... [ 3.790727] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.798387] systemd[1]: Starting Load Kernel Module configfs... [ 3.805904] systemd[1]: Starting Load Kernel Module drm... [ 3.813368] systemd[1]: Starting Load Kernel Module fuse... [ 3.816997] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 3.823870] systemd[1]: Starting File System Check on Root Device... [ 3.841162] systemd[1]: Starting Journal Service... [ 3.850417] systemd[1]: Starting Load Kernel Modules... [ 3.857980] systemd[1]: Starting Coldplug All udev Devices... [ 3.903719] systemd[1]: Mounted POSIX Message Queue File System. [ 3.911278] systemd[1]: Mounted RPC Pipe File System. [ 3.919235] systemd[1]: Mounted Kernel Debug File System. [ 3.920048] systemd[1]: Mounted Kernel Trace File System. [ 3.925106] systemd[1]: Finished Restore / save the current clock. [ 3.927918] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.929894] systemd[1]: modprobe@configfs.service: Succeeded. [ 3.931423] systemd[1]: Finished Load Kernel Module configfs. [ 3.943382] systemd[1]: Mounting Kernel Configuration File System... [ 3.949980] fuse: init (API version 7.34) [ 3.970000] systemd[1]: Started File System Check Daemon to report status. [ 3.973804] systemd[1]: modprobe@fuse.service: Succeeded. [ 3.985742] systemd[1]: Finished Load Kernel Module fuse. [ 4.003734] i2c_dev: i2c /dev entries driver [ 4.024869] systemd[1]: Mounting FUSE Control File System... [ 4.033120] systemd[1]: Finished Load Kernel Modules. [ 4.056954] systemd[1]: Mounted Kernel Configuration File System. [ 4.075392] systemd[1]: Starting Apply Kernel Variables... [ 4.078502] systemd[1]: Finished File System Check on Root Device. [ 4.105521] systemd[1]: Starting Remount Root and Kernel File Systems... [ 4.113053] systemd[1]: modprobe@drm.service: Succeeded. [ 4.128190] systemd[1]: Finished Load Kernel Module drm. [ 4.129709] systemd[1]: Mounted FUSE Control File System. [ 4.131687] systemd[1]: Finished Apply Kernel Variables. [ 4.222168] systemd[1]: Started Journal Service. [ 4.278450] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. [ 4.373336] systemd-journald[141]: Received client request to flush runtime journal. [ 4.384275] systemd-journald[141]: File /var/log/journal/d7d891848e054f87b3098307fa301bcf/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 5.351246] mc: Linux media interface: v0.10 [ 5.522798] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 5.524864] bcm2835_audio bcm2835_audio: there is not valid maps for state default [ 5.547656] videodev: Linux video capture interface: v2.00 [ 5.564264] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.568350] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[ 5.584608] [vc_sm_connected_init]: installed successfully [ 5.605277] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.632564] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 5.646831] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 5.666629] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [ 5.676114] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 5.676243] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 5.686923] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 5.686975] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 5.693709] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 5.698019] rpivid feb10000.codec: Device registered as /dev/video19 [ 5.700197] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 5.700247] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 5.708700] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 5.708758] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 5.720537] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 5.720604] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 5.724133] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 5.724832] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 5.725376] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 5.725716] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 5.725748] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 5.725774] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 5.725797] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 5.725819] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 5.730030] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 5.730541] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 5.730974] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 5.731311] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 5.731342] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 5.731366] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 5.731389] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 5.731411] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 5.731619] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 5.832903] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 5.886212] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 6.369048] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 6.415096] Registered IR keymap rc-cec [ 6.415331] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 6.415569] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 [ 6.417410] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.425718] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 [ 6.490365] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.500590] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 6.522053] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 6.549873] Registered IR keymap rc-cec [ 6.550506] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 6.550777] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input1 [ 6.909923] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 6.912039] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 6.970350] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.971499] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.bin failed with error -2 [ 6.979220] Registered IR keymap rc-cec [ 7.011051] usbcore: registered new interface driver brcmfmac [ 7.025940] uart-pl011 fe201000.serial: no DMA platform data [ 7.036035] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 7.113480] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input2 [ 7.182090] 8021q: 802.1Q VLAN Support v1.8 [ 7.254684] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 7.267986] Registered IR keymap rc-cec [ 7.268222] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 7.268487] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input3 [ 7.288873] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 7.289027] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 7.294645] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 [ 7.369831] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 7.395795] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 7.398703] bcmgenet fd580000.ethernet eth0: Link is Down [ 8.037519] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 8.038455] Registered IR keymap rc-cec [ 8.038563] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 8.038679] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input4 [ 8.040555] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 8.041524] Registered IR keymap rc-cec [ 8.041615] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 8.041723] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input5 [ 8.043254] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 8.043477] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 8.043671] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 8.043845] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 8.044032] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 8.044396] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 8.044602] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 8.074636] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 [ 8.074753] vc4-drm gpu: [drm] Cannot find any crtc or sizes [ 8.230460] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 10.417586] systemd-journald[141]: File /var/log/journal/d7d891848e054f87b3098307fa301bcf/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 11.066079] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 11.066110] MAI: soc_pcm_open() failed (-19) [ 11.066860] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 11.066892] MAI: soc_pcm_open() failed (-19) [ 11.067723] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 11.067748] MAI: soc_pcm_open() failed (-19) [ 11.077464] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 11.077491] MAI: soc_pcm_open() failed (-19) [ 11.077800] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 11.077816] MAI: soc_pcm_open() failed (-19) [ 11.078085] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 11.078100] MAI: soc_pcm_open() failed (-19) [ 11.111559] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 11.111591] MAI: soc_pcm_open() failed (-19) [ 11.112331] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 11.112360] MAI: soc_pcm_open() failed (-19) [ 11.113070] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 11.113097] MAI: soc_pcm_open() failed (-19) [ 11.122661] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 11.122694] MAI: soc_pcm_open() failed (-19) [ 11.123065] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 11.123084] MAI: soc_pcm_open() failed (-19) [ 11.123414] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 11.123435] MAI: soc_pcm_open() failed (-19) [ 13.819266] Bluetooth: Core ver 2.22 [ 13.819330] NET: Registered PF_BLUETOOTH protocol family [ 13.819336] Bluetooth: HCI device and connection manager initialized [ 13.819353] Bluetooth: HCI socket layer initialized [ 13.819362] Bluetooth: L2CAP socket layer initialized [ 13.819378] Bluetooth: SCO socket layer initialized [ 13.830924] Bluetooth: HCI UART driver ver 2.3 [ 13.830939] Bluetooth: HCI UART protocol H4 registered [ 13.830996] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 13.831175] Bluetooth: HCI UART protocol Broadcom registered [ 14.002725] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.002740] Bluetooth: BNEP filters: protocol multicast [ 14.002756] Bluetooth: BNEP socket layer initialized [ 14.018255] NET: Registered PF_ALG protocol family [ 14.040995] cryptd: max_cpu_qlen set to 1000 [ 14.128920] Bluetooth: RFCOMM TTY layer initialized [ 14.128946] Bluetooth: RFCOMM socket layer initialized [ 14.128972] Bluetooth: RFCOMM ver 1.11 [ 14.412845] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 20.240606] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead [ 32.474256] cam-dummy-reg: disabling

No response

Additional context

No response

6by9 commented 1 year ago

DSI is not a plug-and-play interface as it has no generic mechanism for probing attached devices. The Raspberry Pi DSI display has additional I2C connectivity to provide power control, backlight, and access to the touchscreen driver IC.

CM4 makes no assumptions about GPIO usage, therefore does not define any default connections for displays, cameras, or anything else. Documentation for configuring that with the legacy stack is at https://www.raspberrypi.com/documentation/computers/compute-module.html#attaching-the-official-7-inch-display.

With Bullseye and vc4-kms-v3d, the simplest step is to add the additional line dtoverlay=vc4-kms-dsi-7inch to config.txt to explicitly enable the display. This is all the firmware is doing if display_auto_detect=1 is set, and a display is found based on the fimware configuration. Almost all the instructions in https://osoyoo.com/2019/09/20/instruction-for-raspberry-pi-5-dsi-touch-screen/#5.3 are out of date for Bullseye.

JamesH65 commented 1 year ago

This documentation may help explain.

https://pip.raspberrypi.com/categories/685/documents/RP-003472-WP/RP-003472-WP-1.pdf

6by9 commented 1 year ago

This documentation may help explain. https://pip.raspberrypi.com/categories/685/documents/RP-003472-WP/RP-003472-WP-1.pdf

The OSOYOO 5 Inch DSI Touch Sceen is a clone of the Pi 7" display, so getting into the detail of implementing drivers shouldn't be necessary in this case. It is a 3rd party panel, therefore Raspberry Pi offer no direct support for it. Should the cloning be less than perfect, it is not our problem to solve.