search

raspberrypi / linux

Kernel source tree for Raspberry Pi-provided kernel builds. Issues unrelated to the linux kernel should be posted on the community forum at https://forums.raspberrypi.com/
Other
11.03k stars 4.95k forks source link

call trace of MCP2518 driver #5255

Closed tzeng015 closed 1 year ago

tzeng015 commented 1 year ago

Describe the bug

hi all pltaform :　imx8mm Linux version : 5.10

I am in troubled in mcp251xfd-core.c of kernel driver. When I setting the data , it is alwayse call trace.

I traced the mcp251xfd-core.c and I find the problem is mcp251xfd_irq. Please see the attach file.

static irqreturn_t mcp251xfd_irq(int irq, void dev_id) { struct mcp251xfd_priv priv = dev_id; irqreturn_t handled = IRQ_NONE; int err; int val;

if (priv->rx_int)
    do {
        int rx_pending;

        rx_pending = gpiod_get_value_cansleep(priv->rx_int);
        if (!rx_pending)
            break;

        err = mcp251xfd_handle(priv, rxif);
        if (err)
            goto out_fail;

        handled = IRQ_HANDLED;
    } while (1);

do {
    u32 intf_pending, intf_pending_clearable;
    bool set_normal_mode = false;

    err = regmap_bulk_read(priv->map_reg, MCP251XFD_REG_INT,
                   &priv->regs_status,
                   sizeof(priv->regs_status) /
                   sizeof(u32));
    if (err)
        goto out_fail;

    intf_pending = FIELD_GET(MCP251XFD_REG_INT_IF_MASK,
                 priv->regs_status.intf) &
        FIELD_GET(MCP251XFD_REG_INT_IE_MASK,
              priv->regs_status.intf);

    if (!(intf_pending)) 
        return handled;

}

I find the this (1) handled = IRQ_NONE; (2) intf_pending = 0 (3) if (!(intf_pending)) return handled; handled = IRQ_NONE so this is the call trace reaseon.

Summary : Can you help me why intf_pending is 0. I already seeting the INT register but it doesn't any chanage of low bit in interrupt function . Please help me . thank you

tzeng015

Steps to reproduce the behaviour

Step 1 : ip link set up can0 type can bitrate 500000 root@a100:/# ip link set up can0 type can bitrate 500000 [ 43.803752] INT NO read RXIF int read data 1118 Before GPIO0 val 3030003 [ 43.810586] INT NO read RXIF int read data 1118 After GPIO0 val 3030002 [ 43.817641] 1124 int read 1125 After GPIO val 73030042 [ 43.823766] mcp251xfd_chip_interrupts_enable val to MCP251XFD_REG_INT 1125 FULL ff1f0000 [ 43.833612] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready root@a100:/# [ 46.340849] irq 182: nobody cared (try booting with the "irqpoll" option) [ 46.347649] CPU: 0 PID: 168 Comm: spi0 Not tainted 5.10.72-lts-5.10.y+g22ec7e8cbace #1 [ 46.355564] Hardware name: FSL i.MX8MM EVK board (DT) [ 46.360615] Call trace: [ 46.363069] dump_backtrace+0x0/0x1a0 [ 46.366732] show_stack+0x18/0x70 [ 46.370050] dump_stack+0xd0/0x12c [ 46.373452] report_bad_irq+0x4c/0xdc [ 46.377289] note_interrupt+0x2d8/0x39c [ 46.381125] handle_irq_event+0xd8/0x150 [ 46.385048] handle_level_irq+0xc0/0x1b0 [ 46.388970] generic_handle_irq+0x30/0x50 [ 46.392981] mxc_gpio_irq_handler+0x50/0x140 [ 46.397251] mx3_gpio_irq_handler+0x80/0xf0 [ 46.401435] __handle_domain_irq+0x7c/0xe0 [ 46.405532] gic_handle_irq+0xc0/0x140 [ 46.409281] el1_irq+0xcc/0x180 [ 46.412423] _raw_spin_unlock_irq+0x14/0x50 [ 46.416606] schedule+0x260/0x6d0 [ 46.420094] schedule+0x70/0x104 [ 46.423323] kthread_worker_fn+0x100/0x18c [ 46.427417] kthread+0x154/0x160 [ 46.430645] ret_from_fork+0x10/0x30 [ 46.434219] handlers: [ 46.436493] [<000000002e7cb574>] irq_default_primary_handler threaded [<00000000745389ea>] mcp251xfd_irq [mcp251xfd] [ 46.447024] Disabling IRQ #182

Device (s)

Other

System

OS : Yocto Linux version : 5.10

Logs

root@a100:/# ip link set up can0 type can bitrate 500000 [ 43.803752] INT NO read RXIF int read data 1118 Before GPIO0 val 3030003 [ 43.810586] INT NO read RXIF int read data 1118 After GPIO0 val 3030002 [ 43.817641] 1124 int read 1125 After GPIO val 73030042 [ 43.823766] mcp251xfd_chip_interrupts_enable val to MCP251XFD_REG_INT 1125 FULL ff1f0000 [ 43.833612] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready root@a100:/# [ 46.340849] irq 182: nobody cared (try booting with the "irqpoll" option) [ 46.347649] CPU: 0 PID: 168 Comm: spi0 Not tainted 5.10.72-lts-5.10.y+g22ec7e8cbace #1 [ 46.355564] Hardware name: FSL i.MX8MM EVK board (DT) [ 46.360615] Call trace: [ 46.363069] dump_backtrace+0x0/0x1a0 [ 46.366732] show_stack+0x18/0x70 [ 46.370050] dump_stack+0xd0/0x12c [ 46.373452] report_bad_irq+0x4c/0xdc [ 46.377289] note_interrupt+0x2d8/0x39c [ 46.381125] handle_irq_event+0xd8/0x150 [ 46.385048] handle_level_irq+0xc0/0x1b0 [ 46.388970] generic_handle_irq+0x30/0x50 [ 46.392981] mxc_gpio_irq_handler+0x50/0x140 [ 46.397251] mx3_gpio_irq_handler+0x80/0xf0 [ 46.401435] __handle_domain_irq+0x7c/0xe0 [ 46.405532] gic_handle_irq+0xc0/0x140 [ 46.409281] el1_irq+0xcc/0x180 [ 46.412423] _raw_spin_unlock_irq+0x14/0x50 [ 46.416606] schedule+0x260/0x6d0 [ 46.420094] schedule+0x70/0x104 [ 46.423323] kthread_worker_fn+0x100/0x18c [ 46.427417] kthread+0x154/0x160 [ 46.430645] ret_from_fork+0x10/0x30 [ 46.434219] handlers: [ 46.436493] [<000000002e7cb574>] irq_default_primary_handler threaded [<00000000745389ea>] mcp251xfd_irq [mcp251xfd] [ 46.447024] Disabling IRQ #182

Broadcast message from systemd-journald@a100 (Wed 2021-03-24 10:26:01 UTC):

kernel[364]: [ 46.447024] Disabling IRQ #182

root@a100:/# cat proc/interrupts CPU0 CPU1 CPU2 CPU3 9: 0 0 0 0 GICv3 25 Level vgic 11: 2601 2030 1576 1614 GICv3 30 Level arch_timer 12: 0 0 0 0 GICv3 27 Level kvm guest vtimer 14: 365 540 411 424 GICv3 79 Level timer@306a0000 15: 0 0 0 0 GICv3 23 Level arm-pmu 20: 0 0 0 0 GICv3 128 Level sai 21: 0 0 0 0 GICv3 82 Level sai 22: 0 0 0 0 GICv3 122 Level sai 23: 0 0 0 0 GICv3 141 Level micfil 24: 0 0 0 0 GICv3 142 Level micfil 25: 0 0 0 0 GICv3 76 Level micfil 26: 0 0 0 0 GICv3 77 Level micfil 37: 0 0 0 0 GICv3 110 Level 30280000.watchdog 38: 0 0 0 0 GICv3 135 Level sdma 39: 0 0 0 0 GICv3 66 Level sdma 40: 0 0 0 0 GICv3 52 Level caam-snvs 41: 0 0 0 0 GICv3 51 Level rtc alarm 42: 0 0 0 0 GICv3 36 Level 30370000.snvs:snvs-powerkey 44: 103537 0 0 0 GICv3 63 Level 30820000.spi 45: 14 0 0 0 GICv3 64 Level 30830000.spi 46: 0 0 0 0 GICv3 58 Level 30860000.serial 47: 657 0 0 0 GICv3 59 Level 30890000.serial 49: 457 0 0 0 GICv3 67 Level 30a20000.i2c 50: 0 0 0 0 GICv3 68 Level 30a30000.i2c 51: 58 0 0 0 GICv3 69 Level 30a40000.i2c 52: 0 0 0 0 GICv3 70 Level 30a50000.i2c 54: 52 0 0 0 GICv3 54 Level mmc0 55: 0 0 0 0 GICv3 55 Level mmc1 56: 4498 0 0 0 GICv3 56 Level mmc2 57: 8 0 0 0 GICv3 34 Level sdma 58: 0 0 0 0 GICv3 150 Level 30be0000.ethernet 59: 0 0 0 0 GICv3 151 Level 30be0000.ethernet 60: 0 0 0 0 GICv3 152 Level 30be0000.ethernet 61: 0 0 0 0 GICv3 153 Level 30be0000.ethernet 62: 0 0 0 0 GICv3 37 Level imx-lcdif-crtc.0 63: 0 0 0 0 GICv3 50 Level 32e10000.mipi_dsi 66: 0 0 0 0 GICv3 130 Level imx8_ddr_perf_pmu 67: 0 0 0 0 GICv3 62 Level hx280enc 68: 0 0 0 0 GICv3 39 Level hantrodec 69: 0 0 0 0 GICv3 40 Level hantrodec 70: 0 0 0 0 GICv3 35 Level galcore:0 71: 0 0 0 0 GICv3 57 Level galcore:2d 75: 0 0 0 0 gpio-mxc 3 Edge bd718xx-irq 85: 0 0 0 0 gpio-mxc 13 Edge gpio-ir-recv-irq 87: 0 0 0 0 gpio-mxc 15 Edge 30b50000.mmc cd 182: 100001 0 0 0 gpio-mxc 14 Level spi0.0 234: 0 0 0 0 PCI-MSI 0 Edge PCIe PME 235: 0 0 0 0 PCI-MSI 524288 Edge eth1 236: 27 0 0 0 PCI-MSI 524289 Edge eth1-TxRx-0 237: 27 0 0 0 PCI-MSI 524290 Edge eth1-TxRx-1 238: 27 0 0 0 PCI-MSI 524291 Edge eth1-TxRx-2 239: 27 0 0 0 PCI-MSI 524292 Edge eth1-TxRx-3 240: 0 0 0 0 GICv3 137 Level fsl-jr0 241: 15 0 0 0 GICv3 138 Level 30902000.jr 242: 0 0 0 0 GICv3 146 Level 30903000.jr IPI0: 101392 172432 2142 2174 Rescheduling interrupts IPI1: 226 29753 424 134 Function call interrupts IPI2: 0 0 0 0 CPU stop interrupts IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts IPI4: 14 57 58 195 Timer broadcast interrupts IPI5: 603 595 318 223 IRQ work interrupts IPI6: 0 0 0 0 CPU wake-up interrupts Err: 0 root@a100:/#

Additional context

No response

pelwell commented 1 year ago 
[ 43.803752] INT NO read RXIF int read data 1118 Before GPIO0 val 3030003
[ 43.810586] INT NO read RXIF int read data 1118 After GPIO0 val 3030002
[ 43.817641] 1124 int read 1125 After GPIO val 73030042
[ 43.823766] mcp251xfd_chip_interrupts_enable val to MCP251XFD_REG_INT 1125 FULL ff1f0000

Those aren't standard error messages from the kernel - somebody has added them to debug a problem.

[ 46.355564] Hardware name: FSL i.MX8MM EVK board (DT)

That's not one of ours.

If you're running a non-Raspberry Pi kernel on a non-Raspberry Pi board, you've come to the wrong place.