Main Info Could not load the Qt platform plugin "xcb" in "" even though it was found.

Describe the bug

Start the test. Run the Pi with internal WLAN(2.4GHz) . I installed wireshark Not issue The issue started when I try to run Wireshark

error should 23:51:14.549 Main Warn could not connect to display 23:51:14.549 Main Info Could not load the Qt platform plugin "xcb" in "" even though it was found. Aborted

I installed "sudo apt-get install libxcb-xinerama0" sudo apt-get install libxkbcommon-x11-0

Steps to reproduce the behaviour

install wireshark
Created group

Device (s)

Raspberry Pi 4 Mod. B

System

Raspberry Pi reference 2023-02-21 Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, f2d385517c9631f2ded876deb1115725d0c75995, stage4

pi@gponcekpi:~ $ uname -a Linux gponcekpi 5.15.84-v7l+ #1613 SMP Thu Jan 5 12:01:26 GMT 2023 armv7l GNU/Linux

Logs

[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.15.84-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1613 SMP Thu Jan 5 12:01:26 GMT 2023 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] random: crng init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536 [ 0.000000] pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:3E:4A:DB vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b0ef97d1-02 rootfstype=ext4 fsck.repair=yes rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000014890000-0x0000000018890000] (64MB) [ 0.000000] Memory: 3601324K/4050944K available (10240K kernel code, 1386K rwdata, 3308K rodata, 2048K init, 591K bss, 121940K reserved, 327680K cma-reserved, 3264512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 35518 entries in 105 pages [ 0.000000] ftrace: allocated 105 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25) [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000022] Switching to timer-based delay loop, resolution 18ns [ 0.000383] Console: colour dummy device 80x30 [ 0.001051] printk: console [tty1] enabled [ 0.001128] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.001180] pid_max: default: 32768 minimum: 301 [ 0.001335] LSM: Security Framework initializing [ 0.001546] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001594] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003137] cgroup: Disabling memory control group subsystem [ 0.003392] CPU: Testing write buffer coherency: ok [ 0.003462] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.003916] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005426] Setting up static identity map for 0x200000 - 0x20003c [ 0.005641] rcu: Hierarchical SRCU implementation. [ 0.006654] smp: Bringing up secondary CPUs ... [ 0.007821] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.009127] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.010449] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010610] smp: Brought up 1 node, 4 CPUs [ 0.010689] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.010721] CPU: All CPU(s) started in HYP mode. [ 0.010746] CPU: Virtualization extensions available. [ 0.011508] devtmpfs: initialized [ 0.026440] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.026675] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.026730] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.036435] pinctrl core: initialized pinctrl subsystem [ 0.037686] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.042056] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.042887] audit: initializing netlink subsys (disabled) [ 0.043158] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.043798] thermal_sys: Registered thermal governor 'step_wise' [ 0.044480] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.044538] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.044945] Serial: AMBA PL011 UART driver [ 0.058478] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.090045] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-01-05T10:46:54, variant start [ 0.100061] raspberrypi-firmware soc:firmware: Firmware hash is 8ba17717fbcedd4c3b6d4bce7e50c7af4155cba9 [ 0.159539] Kprobes globally optimized [ 0.165513] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.170078] vgaarb: loaded [ 0.170636] SCSI subsystem initialized [ 0.170890] usbcore: registered new interface driver usbfs [ 0.170967] usbcore: registered new interface driver hub [ 0.171052] usbcore: registered new device driver usb [ 0.171458] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.171670] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 0.172015] pps_core: LinuxPPS API ver. 1 registered [ 0.172045] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.172094] PTP clock support registered [ 0.173696] clocksource: Switched to clocksource arch_sys_counter [ 0.254389] VFS: Disk quotas dquot_6.6.0 [ 0.254519] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.254720] FS-Cache: Loaded [ 0.254916] CacheFiles: Loaded [ 0.264012] NET: Registered PF_INET protocol family [ 0.264283] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.265887] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.265943] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.265988] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.266071] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.266159] TCP: Hash tables configured (established 8192 bind 8192) [ 0.266330] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.266386] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.266659] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.267677] RPC: Registered named UNIX socket transport module. [ 0.267711] RPC: Registered udp transport module. [ 0.267738] RPC: Registered tcp transport module. [ 0.267764] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.267800] PCI: CLS 0 bytes, default 64 [ 1.327532] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 1.330147] Initialise system trusted keyrings [ 1.330460] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.339571] zbud: loaded [ 1.341528] FS-Cache: Netfs 'nfs' registered for caching [ 1.342451] NFS: Registering the id_resolver key type [ 1.342508] Key type id_resolver registered [ 1.342536] Key type id_legacy registered [ 1.342682] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.342715] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.343863] Key type asymmetric registered [ 1.343894] Asymmetric key parser 'x509' registered [ 1.344139] bounce: pool size: 64 pages [ 1.344215] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.344467] io scheduler mq-deadline registered [ 1.344499] io scheduler kyber registered [ 1.354053] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.354118] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.354234] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.354355] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 1.415801] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.416240] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.416277] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.416312] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.416425] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.416694] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.420335] PCI: bus0: Fast back to back transfers disabled [ 1.420690] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.420835] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.421313] pci 0000:01:00.0: PME# supported from D0 D3hot [ 1.424923] PCI: bus1: Fast back to back transfers disabled [ 1.425001] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.425044] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.425149] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.425187] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.425626] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.425875] pcieport 0000:00:00.0: PME: Signaling with IRQ 77 [ 1.439226] iproc-rng200 fe104000.rng: hwrng registered [ 1.439623] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.441145] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.453816] brd: module loaded [ 1.464029] loop: module loaded [ 1.464770] Loading iSCSI transport class v2.0-870. [ 1.469955] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.563859] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.565063] usbcore: registered new interface driver r8152 [ 1.565162] usbcore: registered new interface driver lan78xx [ 1.565239] usbcore: registered new interface driver smsc95xx [ 1.612990] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.613044] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.618697] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0001e40000000890 [ 1.619795] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.619838] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.619883] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.620287] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.620331] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.620368] usb usb1: Product: xHCI Host Controller [ 1.620398] usb usb1: Manufacturer: Linux 5.15.84-v7l+ xhci-hcd [ 1.620428] usb usb1: SerialNumber: 0000:01:00.0 [ 1.621149] hub 1-0:1.0: USB hub found [ 1.621235] hub 1-0:1.0: 1 port detected [ 1.622259] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.622304] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.622342] usb usb2: Product: xHCI Host Controller [ 1.622372] usb usb2: Manufacturer: Linux 5.15.84-v7l+ xhci-hcd [ 1.622402] usb usb2: SerialNumber: 0000:01:00.0 [ 1.623114] hub 2-0:1.0: USB hub found [ 1.623228] hub 2-0:1.0: 4 ports detected [ 1.625140] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.625505] dwc_otg: FIQ enabled [ 1.625519] dwc_otg: NAK holdoff enabled [ 1.625532] dwc_otg: FIQ split-transaction FSM enabled [ 1.625550] Module dwc_common_port init [ 1.625986] usbcore: registered new interface driver uas [ 1.626115] usbcore: registered new interface driver usb-storage [ 1.626341] mousedev: PS/2 mouse device common for all mice [ 1.632022] sdhci: Secure Digital Host Controller Interface driver [ 1.632058] sdhci: Copyright(c) Pierre Ossman [ 1.632774] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.636585] ledtrig-cpu: registered to indicate activity on CPUs [ 1.636933] hid: raw HID events driver (C) Jiri Kosina [ 1.637148] usbcore: registered new interface driver usbhid [ 1.637179] usbhid: USB HID core driver [ 1.643335] Initializing XFRM netlink socket [ 1.643398] NET: Registered PF_PACKET protocol family [ 1.643524] Key type dns_resolver registered [ 1.644177] Registering SWP/SWPB emulation handler [ 1.644990] registered taskstats version 1 [ 1.645048] Loading compiled-in X.509 certificates [ 1.645931] Key type .fscrypt registered [ 1.645961] Key type fscrypt-provisioning registered [ 1.658353] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.658711] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.658876] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2 [ 1.668307] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.668815] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.670132] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.670171] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.700594] of_cfs_init [ 1.700850] of_cfs_init: OK [ 1.736451] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 1.736795] Waiting for root device PARTUUID=b0ef97d1-02... [ 1.835461] mmc0: new ultra high speed DDR50 SDHC card at address 59b4 [ 1.836483] mmcblk0: mmc0:59b4 SDU1 29.1 GiB [ 1.843430] mmcblk0: p1 p2 [ 1.844126] mmcblk0: mmc0:59b4 SDU1 29.1 GiB [ 1.845339] mmc1: new high speed SDIO card at address 0001 [ 1.867611] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 1.867729] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.868429] devtmpfs: mounted [ 1.879452] Freeing unused kernel image (initmem) memory: 2048K [ 1.894016] Run /sbin/init as init process [ 1.894047] with arguments: [ 1.894060] /sbin/init [ 1.894073] with environment: [ 1.894085] HOME=/ [ 1.894098] TERM=linux [ 1.903742] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.086426] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 2.086487] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.086522] usb 1-1: Product: USB2.0 Hub [ 2.097796] hub 1-1:1.0: USB hub found [ 2.098103] hub 1-1:1.0: 4 ports detected [ 2.214399] systemd[1]: System time before build time, advancing clock. [ 2.416577] NET: Registered PF_INET6 protocol family [ 2.418347] Segment Routing with IPv6 [ 2.418408] In-situ OAM (IOAM) with IPv6 [ 2.496198] systemd[1]: systemd 247.3-7+rpi1+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.497140] systemd[1]: Detected architecture arm. [ 2.509285] systemd[1]: Set hostname to . [ 3.198567] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 3.381312] systemd[1]: Queued start job for default target Graphical Interface. [ 3.386765] systemd[1]: Created slice system-getty.slice. [ 3.388495] systemd[1]: Created slice system-modprobe.slice. [ 3.389884] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.391069] systemd[1]: Created slice User and Session Slice. [ 3.391915] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.393451] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.394565] systemd[1]: Reached target Slices. [ 3.395071] systemd[1]: Reached target Swap. [ 3.398999] systemd[1]: Listening on Syslog Socket. [ 3.400146] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.400957] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.402478] systemd[1]: Listening on Journal Audit Socket. [ 3.403563] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.405262] systemd[1]: Listening on Journal Socket. [ 3.410519] systemd[1]: Listening on udev Control Socket. [ 3.411768] systemd[1]: Listening on udev Kernel Socket. [ 3.413002] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 3.418608] systemd[1]: Mounting POSIX Message Queue File System... [ 3.425369] systemd[1]: Mounting RPC Pipe File System... [ 3.432608] systemd[1]: Mounting Kernel Debug File System... [ 3.440522] systemd[1]: Mounting Kernel Trace File System... [ 3.441898] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 3.450931] systemd[1]: Starting Restore / save the current clock... [ 3.459430] systemd[1]: Starting Set the console keyboard layout... [ 3.467796] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.475827] systemd[1]: Starting Load Kernel Module configfs... [ 3.484456] systemd[1]: Starting Load Kernel Module drm... [ 3.493030] systemd[1]: Starting Load Kernel Module fuse... [ 3.497717] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 3.504402] systemd[1]: Starting File System Check on Root Device... [ 3.516906] systemd[1]: Starting Journal Service... [ 3.532153] systemd[1]: Starting Load Kernel Modules... [ 3.554805] systemd[1]: Starting Coldplug All udev Devices... [ 3.588296] systemd[1]: Mounted POSIX Message Queue File System. [ 3.590288] systemd[1]: Mounted RPC Pipe File System. [ 3.591361] systemd[1]: Mounted Kernel Debug File System. [ 3.592398] systemd[1]: Mounted Kernel Trace File System. [ 3.607114] systemd[1]: Finished Restore / save the current clock. [ 3.610607] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.612790] fuse: init (API version 7.34) [ 3.613898] systemd[1]: modprobe@configfs.service: Succeeded. [ 3.617231] systemd[1]: Finished Load Kernel Module configfs. [ 3.631795] systemd[1]: Mounting Kernel Configuration File System... [ 3.641129] i2c_dev: i2c /dev entries driver [ 3.649591] systemd[1]: Started File System Check Daemon to report status. [ 3.654355] systemd[1]: modprobe@fuse.service: Succeeded. [ 3.656241] systemd[1]: Finished Load Kernel Module fuse. [ 3.671196] systemd[1]: Finished Load Kernel Modules. [ 3.673522] systemd[1]: Mounted Kernel Configuration File System. [ 3.681690] systemd[1]: Mounting FUSE Control File System... [ 3.699139] systemd[1]: Starting Apply Kernel Variables... [ 3.728827] systemd[1]: Mounted FUSE Control File System. [ 3.763840] systemd[1]: Finished Apply Kernel Variables. [ 3.791715] systemd[1]: modprobe@drm.service: Succeeded. [ 3.793236] systemd[1]: Finished Load Kernel Module drm. [ 3.820145] systemd[1]: Finished File System Check on Root Device. [ 3.826140] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.950209] systemd[1]: Started Journal Service. [ 3.998433] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. [ 4.066425] systemd-journald[138]: Received client request to flush runtime journal. [ 4.075463] systemd-journald[138]: File /var/log/journal/fde2a7bc981a491bbb429a184e56f65d/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 5.552318] mc: Linux media interface: v0.10 [ 5.628653] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.678831] videodev: Linux video capture interface: v2.00 [ 5.683146] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[ 5.692388] [vc_sm_connected_init]: installed successfully [ 5.874373] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 5.903518] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 5.940676] bcm2835_audio bcm2835_audio: card created with 8 channels [ 5.950578] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 6.087949] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 6.140322] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 6.174861] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 6.190143] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 6.200982] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [ 6.219597] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 6.221225] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 6.221896] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 6.226120] rpivid feb10000.codec: Device registered as /dev/video19 [ 6.226127] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 6.226158] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 6.226184] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 6.226207] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 6.226230] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 6.228332] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 6.228404] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 6.234165] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 6.234217] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 6.249780] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 6.249850] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 6.258595] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 6.258647] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 6.266479] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 6.267983] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 6.275491] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 6.275568] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 6.279200] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 6.314878] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 6.317851] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 6.317902] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 6.317928] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 6.317950] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 6.317972] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 6.323626] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 6.361714] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.405864] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.426397] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 6.545967] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 6.555004] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.604076] usbcore: registered new interface driver brcmfmac [ 6.840339] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 6.846489] Registered IR keymap rc-cec [ 6.846722] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 6.846947] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 [ 6.859800] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 6.862883] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.866496] Registered IR keymap rc-cec [ 6.866691] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 6.866932] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1 [ 6.868732] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 [ 6.890255] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 6.890862] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 6.891605] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.892330] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.893112] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.894237] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.894963] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.900630] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 6.901058] vc4-drm gpu: [drm] Cannot find any crtc or sizes [ 8.189315] 8021q: 802.1Q VLAN Support v1.8 [ 8.216835] uart-pl011 fe201000.serial: no DMA platform data [ 8.470995] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 8.919107] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 9.314457] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 9.316639] bcmgenet fd580000.ethernet eth0: Link is Down [ 13.514032] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 13.514100] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.929423] Bluetooth: Core ver 2.22 [ 15.929519] NET: Registered PF_BLUETOOTH protocol family [ 15.929531] Bluetooth: HCI device and connection manager initialized [ 15.929552] Bluetooth: HCI socket layer initialized [ 15.929567] Bluetooth: L2CAP socket layer initialized [ 15.929590] Bluetooth: SCO socket layer initialized [ 15.942572] Bluetooth: HCI UART driver ver 2.3 [ 15.942594] Bluetooth: HCI UART protocol H4 registered [ 15.942675] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 15.942928] Bluetooth: HCI UART protocol Broadcom registered [ 16.136059] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.136071] Bluetooth: BNEP filters: protocol multicast [ 16.136084] Bluetooth: BNEP socket layer initialized [ 16.148139] NET: Registered PF_ALG protocol family [ 16.165099] cryptd: max_cpu_qlen set to 1000 [ 16.598032] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [ 17.114003] vc4-drm gpu: [drm] Cannot find any crtc or sizes [ 31.833764] cam-dummy-reg: disabling pi@gponcekpi:~ $

Additional context

The Wireshark works fine outside of raspberry Pi 4

raspberrypi / linux