Closed karadevnet closed 1 year ago
This is not the right place to ask for help unless there is a clear bug in the kernel. The Raspberry Pi forums are much more likely to be helpful - try Troubleshooting as a starting point: https://forums.raspberrypi.com/viewforum.php?f=28
However, you say:
I know that apache user is www-data and need to own sym link and target mount folder and/or all content inside in mount folder. But when execute: sudo chown -R www-data:www-data /media/pi/ADATA_8_GB command is show to executed, no return errors and/or warning messages but user and group are same. Can be seen with ls -l
Where are you changing the ownership of the symbolic link? /var/www/html/upload/ADATA_8_GB is the symbolic link and /media/pi/ADATA_8GB is the target directory, but you are only chowning the target and "ls -l"ing the symbolic link.
as you can see from this picture and all data and mount folder are same user of apache www-data. the bug is there, but i can not get it. i am not a programmer of kernel, apache or else. need to check it deeply to find it and fix it. i know about forums very well, but have not reason to write there, because i already know and make what they will say to me. check it, fixit and make it work !!! all linux and pi 4, 5, ++ waiting for this!!!
Where are you changing the ownership of the symbolic link?
$ sudo chown -R www-data:www-data /var/www/html/upload/ADATA_8_GB
$ ls -l /var/www/html/upload/ADATA_8_GB
$ ls -l /var/www/html/upload/ADATA_8_GB/
no no . talk about sudo chown -R www-data:www-data /media/pi/SDCARD_EXT4_16GB but what i plug in to list in web page and set ownership to www-data:www-data is not work on picture above is seen that only SDCARD_EXT4_16GB is user apache2 www-data:www-data and this how need to be. but no work. icon of web page is not blue like others and give forbidden i try ssd with ntfs, sd card with ext4 like is shown, but now success
i think i need some how to example step by step to make it work and may be not only me
if you need more info jus say it to give you what you need to know for what i made until this point i think i made a big mess between file hosts and domain.conf file in them folders. need to reinstall brand new and try it step by step for virtual hosting. if have any help will be great :) thanks and best regards.
Describe the bug
Project : WEB UPLOAD SYSTEM WITH RASPBERRY PI 3B+ AND 2023-05-03-raspios-bullseye-armhf-full.img Hardware : raspberry pi 3b+ and ssd apacer 1TB usb to sata outside box Boot sd card Kingston 32GB, pi imager to upload img file downloaded by torent GOAL : upload / download / delete files to SSD drive trough simple web site in local lan system with link IP : 192.168.88.249/upload Router : mikrotik hap lite – best of 😊 no problem with this Pi static ip : 192.168.99.249 Software WEB SERVER : apache 2 + php7.4.33 instaled by bash command user@user : sudo apt install apache2 user@user : sudo apt install php libapache2-mod-php all work fine until start to make my web system with external ssd drive or any of drives attached to usb ports. Link for php file git hub https://github.com/jcampbell1/simple-file-manager System is good, but linux can not see sym links outside from standart apache folder /var/www/html/upload Php link works fine will show in picture bellow. I know that apache user is www-data and need to own sym link and target mount folder and/or all content inside in mount folder. But when execute: sudo chown -R www-data:www-data /media/pi/ADATA_8_GB command is show to executed, no return errors and/or warning messages but user and group are same. Can be seen with ls -l like Is here:
Icon of link wit name ADATA_8_GB is not like a other folder in list and is not active. When click on it give forbidden 403 error
I spend one week to read all data in internet for this problem. Try it to make is like a new virtual host with apache conf file all is written in internet I try it. NO SUCCESS !!!!
I think is here have some little fix need to be done to make it all system works like charm. I can not understand what the problem is, but all y read and try from internet not works.
Linux or apache2 or php x.x.x.x or some else can not allow to work with extended drives attached to usb ports. Try it with ntfs, ext4, fat32 no success and no success and that is it !!! ☹
After one week fight with all powers that I have I decide to write you for this and think this is best way I know like all world that the pi 5 is here. It is crucial for automation for all users to make it work fine. Because all my projects with lan 10/100 communications depends of this to can read write execute data from extended usb devices like ssd sata attached to usb.
I am sure and will be happy like all users to here that is worked in your desk office first and way to make it work in my. Best regards to all developers. Pi 5 is great and strong will be mile stone to all my projects with automation, electronics and programming
My web site is www.karadev.net – there have many info about me. Also have a github with C_SHARP_RPI2040_LITTLE_FS_UPLOADER for raspberry pi pico file system. I made it 5-6 months ago. https://github.com/karadevnet
I work a lot with PICO it is great. NEED THIS TO RUN for all others automation system that I produce and develop 😊 If any info need or need to test some way to give a data for fixing this let me know I ma ready to help to fix, test, develop and make it run it
Steps to reproduce the behaviour
install brand new distro from 2023-05-03-raspios-bullseye-armhf-full.img torent download Software WEB SERVER : apache 2 + php7.4.33 instaled by bash command user@user : sudo apt install apache2 user@user : sudo apt install php libapache2-mod-php
make a folder upload and save in it index.php file of web upload system make a sym link to adata flash drive and / or ssd / sd card to access drives use chown to change sym link user from root to www-data:www-data
and other 1000 try command and files for virtual host, but no success :( need to make some sort of easy menager to make a extended drives work like a local folders that sym links need to do but some easy way to set up this. and some sort of software to make a pi like a small hosting company for 1000 web sites if user need this with pi 5 that will be crucial for user and automation
Device (s)
Raspberry Pi 3 Mod. B+
System
pi@pi:~ $ cat /etc/rpi-issue Raspberry Pi reference 2023-05-03 Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 47eee1f0ddcf8811559d51eea1c1bb48335e3e88, stage5
Mar 17 2023 10:52:42 Copyright (c) 2012 Broadcom version 82f3750a65fadae9a38077e3c2e217ad158c8d54 (clean) (release) (start)
pi@pi:~ $ uname -a Linux pi 6.1.21-v7+ #1642 SMP Mon Apr 3 17:20:52 BST 2023 armv7l GNU/Linux
Logs
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.21-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP Mon Apr 3 17:20:52 BST 2023 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] random: crng init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x1ec00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] percpu: Embedded 17 pages/cpu s36884 r8192 d24556 u69632 [ 0.000000] pcpu-alloc: s36884 r8192 d24556 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=91b4705a-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 680924K/970752K available (10240K kernel code, 1452K rwdata, 2900K rodata, 1024K init, 613K bss, 27684K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 34800 entries in 103 pages [ 0.000000] ftrace: allocated 102 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000018] Switching to timer-based delay loop, resolution 52ns [ 0.000381] Console: colour dummy device 80x30 [ 0.000458] printk: console [tty1] enabled [ 0.000508] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000531] pid_max: default: 32768 minimum: 301 [ 0.000677] LSM: Security Framework initializing [ 0.000883] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000905] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002039] cgroup: Disabling memory control group subsystem [ 0.002278] CPU: Testing write buffer coherency: ok [ 0.002686] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003528] cblist_init_generic: Setting adjustable number of callback queues. [ 0.003545] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003657] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003799] Setting up static identity map for 0x100000 - 0x10003c [ 0.003937] rcu: Hierarchical SRCU implementation. [ 0.003947] rcu: Max phase no-delay instances is 1000. [ 0.004650] smp: Bringing up secondary CPUs ... [ 0.005549] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006502] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.007376] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.007481] smp: Brought up 1 node, 4 CPUs [ 0.007502] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.007516] CPU: All CPU(s) started in HYP mode. [ 0.007523] CPU: Virtualization extensions available. [ 0.008265] devtmpfs: initialized [ 0.023468] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.023671] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.023700] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.033941] pinctrl core: initialized pinctrl subsystem [ 0.035125] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.038425] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.043506] audit: initializing netlink subsys (disabled) [ 0.043743] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.044362] thermal_sys: Registered thermal governor 'step_wise' [ 0.045437] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.045456] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.045709] Serial: AMBA PL011 UART driver [ 0.051475] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.070067] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:52:42, variant start [ 0.080080] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54 [ 0.122904] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.127512] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.129189] SCSI subsystem initialized [ 0.129423] usbcore: registered new interface driver usbfs [ 0.129487] usbcore: registered new interface driver hub [ 0.129540] usbcore: registered new device driver usb [ 0.129756] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.129924] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 0.130181] pps_core: LinuxPPS API ver. 1 registered [ 0.130192] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.130219] PTP clock support registered [ 2.008357] clocksource: Switched to clocksource arch_sys_counter [ 2.008950] VFS: Disk quotas dquot_6.6.0 [ 2.009024] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.009178] FS-Cache: Loaded [ 2.009435] CacheFiles: Loaded [ 2.063206] NET: Registered PF_INET protocol family [ 2.063551] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.066130] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.066175] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.066213] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 2.066382] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 2.066715] TCP: Hash tables configured (established 8192 bind 8192) [ 2.066869] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.066929] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.067173] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.067741] RPC: Registered named UNIX socket transport module. [ 2.067753] RPC: Registered udp transport module. [ 2.067762] RPC: Registered tcp transport module. [ 2.067770] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.069643] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 2.106676] Initialise system trusted keyrings [ 2.107051] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 2.116312] zbud: loaded [ 2.118796] NFS: Registering the id_resolver key type [ 2.118840] Key type id_resolver registered [ 2.118850] Key type id_legacy registered [ 2.118977] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.118990] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.120249] Key type asymmetric registered [ 2.120262] Asymmetric key parser 'x509' registered [ 2.120437] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.120451] io scheduler mq-deadline registered [ 2.120462] io scheduler kyber registered [ 2.125503] simple-framebuffer 3eaa9000.framebuffer: framebuffer at 0x3eaa9000, 0x151800 bytes [ 2.125534] simple-framebuffer 3eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880 [ 2.126040] Console: switching to colour frame buffer device 90x30 [ 2.130366] simple-framebuffer 3eaa9000.framebuffer: fb0: simplefb registered! [ 2.135001] bcm2835-rng 3f104000.rng: hwrng registered [ 2.135367] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 2.136211] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 2.147367] brd: module loaded [ 2.154786] loop: module loaded [ 2.155412] Loading iSCSI transport class v2.0-870. [ 2.156828] usbcore: registered new interface driver lan78xx [ 2.156896] usbcore: registered new interface driver smsc95xx [ 2.156913] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.886172] Core Release: 2.80a [ 2.886187] Setting default values for core params [ 2.886215] Finished setting default values for core params [ 3.086475] Using Buffer DMA mode [ 3.086484] Periodic Transfer Interrupt Enhancement - disabled [ 3.086493] Multiprocessor Interrupt Enhancement - disabled [ 3.086501] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 3.086540] Dedicated Tx FIFOs mode
[ 3.087099] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = 9ed04000 dma = 0xded04000 len=9024 [ 3.087137] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 3.087153] dwc_otg: Microframe scheduler enabled
[ 3.087268] WARN::hcd_init_fiq:457: FIQ on core 1
[ 3.087286] WARN::hcd_init_fiq:458: FIQ ASM at 807c4360 length 36
[ 3.087307] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 3.087330] dwc_otg 3f980000.usb: DWC OTG Controller [ 3.087366] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 3.087404] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 [ 3.087456] Init: Port Power? op_state=1 [ 3.087464] Init: Power Port (0) [ 3.087705] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.087725] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.087740] usb usb1: Product: DWC OTG Controller [ 3.087752] usb usb1: Manufacturer: Linux 6.1.21-v7+ dwc_otg_hcd [ 3.087764] usb usb1: SerialNumber: 3f980000.usb [ 3.088501] hub 1-0:1.0: USB hub found [ 3.088553] hub 1-0:1.0: 1 port detected [ 3.089190] dwc_otg: FIQ enabled [ 3.089201] dwc_otg: NAK holdoff enabled [ 3.089209] dwc_otg: FIQ split-transaction FSM enabled [ 3.089224] Module dwc_common_port init [ 3.089502] usbcore: registered new interface driver usb-storage [ 3.089706] mousedev: PS/2 mouse device common for all mice [ 3.092202] sdhci: Secure Digital Host Controller Interface driver [ 3.092214] sdhci: Copyright(c) Pierre Ossman [ 3.092473] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.094573] ledtrig-cpu: registered to indicate activity on CPUs [ 3.094851] hid: raw HID events driver (C) Jiri Kosina [ 3.094989] usbcore: registered new interface driver usbhid [ 3.095001] usbhid: USB HID core driver [ 3.099224] Initializing XFRM netlink socket [ 3.099284] NET: Registered PF_PACKET protocol family [ 3.099407] Key type dns_resolver registered [ 3.100332] Registering SWP/SWPB emulation handler [ 3.101023] registered taskstats version 1 [ 3.101076] Loading compiled-in X.509 certificates [ 3.101903] Key type .fscrypt registered [ 3.101915] Key type fscrypt-provisioning registered [ 3.113265] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 3.113415] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [ 3.115470] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 3.115746] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.117012] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 3.117029] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 3.141902] sdhost: log_buf @ 1f9e34ab (ded07000) [ 3.191732] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 3.193936] of_cfs_init [ 3.194117] of_cfs_init: OK [ 3.195188] Waiting for root device PARTUUID=91b4705a-02... [ 3.227159] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.228397] Indeed it is in host mode hprt0 = 00021501 [ 3.230395] mmc0: new high speed SDHC card at address 5048 [ 3.231225] mmcblk0: mmc0:5048 SD32G 29.0 GiB [ 3.233932] mmcblk0: p1 p2 [ 3.234506] mmcblk0: mmc0:5048 SD32G 29.0 GiB [ 3.268997] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 3.269017] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 3.279434] mmc1: new high speed SDIO card at address 0001 [ 3.438300] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.438468] Indeed it is in host mode hprt0 = 00001101 [ 3.678623] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 3.678659] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.679368] hub 1-1:1.0: USB hub found [ 3.679465] hub 1-1:1.0: 5 ports detected [ 3.784856] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [ 3.785067] EXT4-fs (mmcblk0p2): 1 orphan inode deleted [ 3.785090] EXT4-fs (mmcblk0p2): recovery complete [ 3.793889] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 3.793978] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.801697] devtmpfs: mounted [ 3.807407] Freeing unused kernel image (initmem) memory: 1024K [ 3.828797] Run /sbin/init as init process [ 3.828808] with arguments: [ 3.828815] /sbin/init [ 3.828822] splash [ 3.828829] with environment: [ 3.828836] HOME=/ [ 3.828843] TERM=linux [ 3.998339] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 4.128619] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 4.128658] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.131381] smsc95xx v2.0.0 [ 4.394402] systemd[1]: System time before build time, advancing clock. [ 4.510193] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=199) [ 4.511069] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:12:d0:5b [ 4.608399] usb 1-1.4: new high-speed USB device number 4 using dwc_otg [ 4.622311] NET: Registered PF_INET6 protocol family [ 4.623909] Segment Routing with IPv6 [ 4.623952] In-situ OAM (IOAM) with IPv6 [ 4.707529] systemd[1]: systemd 247.3-7+rpi1+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.708629] systemd[1]: Detected architecture arm. [ 4.710595] systemd[1]: Set hostname to.
[ 4.740426] usb 1-1.4: New USB device found, idVendor=058f, idProduct=6364, bcdDevice= 1.00
[ 4.740460] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.740475] usb 1-1.4: Product: Mass Storage Device
[ 4.740488] usb 1-1.4: Manufacturer: Generic
[ 4.740500] usb 1-1.4: SerialNumber: 058F63646476
[ 4.741194] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 4.742290] scsi host0: usb-storage 1-1.4:1.0
[ 4.745098] hid-generic 0003:058F:6364.0001: hiddev96,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-3f980000.usb-1.4/input1
[ 5.478322] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 5.629111] usb 1-1.3: New USB device found, idVendor=13fd, idProduct=0840, bcdDevice= 1.14
[ 5.629146] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.629162] usb 1-1.3: Product: External
[ 5.629174] usb 1-1.3: Manufacturer: Generic
[ 5.629186] usb 1-1.3: SerialNumber: 353139333037333230353746
[ 5.629874] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 5.630427] scsi host1: usb-storage 1-1.3:1.0
[ 5.656744] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 5.769315] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 5.927557] systemd[1]: Queued start job for default target Graphical Interface.
[ 5.973263] systemd[1]: Created slice system-getty.slice.
[ 5.974901] systemd[1]: Created slice system-modprobe.slice.
[ 5.976049] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.976876] systemd[1]: Created slice User and Session Slice.
[ 5.977501] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.978911] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.980234] systemd[1]: Reached target Slices.
[ 5.980474] systemd[1]: Reached target Swap.
[ 5.985337] systemd[1]: Listening on Syslog Socket.
[ 5.986144] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.986618] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 5.987943] systemd[1]: Listening on Journal Audit Socket.
[ 5.988748] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.989713] systemd[1]: Listening on Journal Socket.
[ 5.991687] systemd[1]: Listening on udev Control Socket.
[ 5.992497] systemd[1]: Listening on udev Kernel Socket.
[ 5.993747] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 5.998463] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.003601] systemd[1]: Mounting RPC Pipe File System...
[ 6.009780] systemd[1]: Mounting Kernel Debug File System...
[ 6.016108] systemd[1]: Mounting Kernel Trace File System...
[ 6.017291] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 6.027958] systemd[1]: Starting Restore / save the current clock...
[ 6.042840] sd 0:0:0:0: [sda] 30228480 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 6.043259] scsi 0:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 6.043854] sd 0:0:0:0: [sda] Write Protect is off
[ 6.043881] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 6.044362] sd 0:0:0:1: [sdb] Media removed, stopped polling
[ 6.044797] scsi 0:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 6.045258] sd 0:0:0:0: [sda] No Caching mode page found
[ 6.045276] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 6.045499] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 6.046914] scsi 0:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
[ 6.050345] sd 0:0:0:3: [sdd] Media removed, stopped polling
[ 6.051595] systemd[1]: Starting Set the console keyboard layout...
[ 6.051598] sda: sda1
[ 6.052332] sd 0:0:0:2: [sdc] Media removed, stopped polling
[ 6.052430] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.053761] sd 0:0:0:2: [sdc] Attached SCSI removable disk
[ 6.054158] sd 0:0:0:3: [sdd] Attached SCSI removable disk
[ 6.058935] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 6.068214] systemd[1]: Starting Load Kernel Module configfs...
[ 6.080214] systemd[1]: Starting Load Kernel Module drm...
[ 6.088843] systemd[1]: Starting Load Kernel Module fuse...
[ 6.094464] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 6.100507] systemd[1]: Starting File System Check on Root Device...
[ 6.117046] systemd[1]: Starting Journal Service...
[ 6.132528] systemd[1]: Starting Load Kernel Modules...
[ 6.156374] systemd[1]: Starting Coldplug All udev Devices...
[ 6.179877] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.180518] systemd[1]: Mounted RPC Pipe File System.
[ 6.181066] systemd[1]: Mounted Kernel Debug File System.
[ 6.181570] systemd[1]: Mounted Kernel Trace File System.
[ 6.183049] systemd[1]: Finished Restore / save the current clock.
[ 6.198418] fuse: init (API version 7.37)
[ 6.200729] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 6.202991] systemd[1]: modprobe@configfs.service: Succeeded.
[ 6.204350] systemd[1]: Finished Load Kernel Module configfs.
[ 6.206287] systemd[1]: modprobe@fuse.service: Succeeded.
[ 6.207393] systemd[1]: Finished Load Kernel Module fuse.
[ 6.225833] systemd[1]: Mounting FUSE Control File System...
[ 6.238331] systemd[1]: Mounting Kernel Configuration File System...
[ 6.251913] systemd[1]: Started File System Check Daemon to report status.
[ 6.260683] systemd[1]: Mounted FUSE Control File System.
[ 6.283751] i2c_dev: i2c /dev entries driver
[ 6.293070] systemd[1]: Finished Load Kernel Modules.
[ 6.295936] systemd[1]: Mounted Kernel Configuration File System.
[ 6.313627] systemd[1]: Starting Apply Kernel Variables...
[ 6.416014] systemd[1]: modprobe@drm.service: Succeeded.
[ 6.417323] systemd[1]: Finished Load Kernel Module drm.
[ 6.435734] systemd[1]: Finished Apply Kernel Variables.
[ 6.518834] systemd[1]: Started Journal Service.
[ 6.649139] scsi 1:0:0:0: Direct-Access Generic External 1.14 PQ: 0 ANSI: 4
[ 6.650743] sd 1:0:0:0: [sde] 2000409263 512-byte logical blocks: (1.02 TB/954 GiB)
[ 6.651114] sd 1:0:0:0: [sde] Write Protect is off
[ 6.651133] sd 1:0:0:0: [sde] Mode Sense: 23 00 00 00
[ 6.651485] sd 1:0:0:0: [sde] No Caching mode page found
[ 6.651502] sd 1:0:0:0: [sde] Assuming drive cache: write through
[ 6.654839] sde: sde1 sde2 sde3
[ 6.655854] sd 1:0:0:0: [sde] Attached SCSI disk
[ 6.967639] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[ 7.086645] systemd-journald[141]: Received client request to flush runtime journal.
[ 7.096119] systemd-journald[141]: File /var/log/journal/ab9cde5d4ec7411ebcc30b6697e7d8d1/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 8.072078] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.072432] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 8.077756] sd 0:0:0:2: Attached scsi generic sg2 type 0
[ 8.088112] sd 0:0:0:3: Attached scsi generic sg3 type 0
[ 8.090663] sd 1:0:0:0: Attached scsi generic sg4 type 0
[ 8.807087] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.824729] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 8.829935] [vc_sm_connected_init]: installed successfully [ 8.845332] mc: Linux media interface: v0.10 [ 9.116121] videodev: Linux video capture interface: v2.00 [ 9.211489] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 9.219608] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 9.228568] bcm2835_audio bcm2835_audio: card created with 8 channels [ 9.271072] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 9.281303] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 9.281813] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 9.282257] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 9.282575] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 9.282625] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 9.282666] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 9.282703] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 9.282741] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 9.285955] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 9.286414] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 9.288161] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 9.291560] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 9.291621] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 9.291646] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 9.291665] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 9.291693] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 9.292198] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 9.356240] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 9.397838] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 9.401438] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 9.401499] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 9.410141] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 9.410196] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 9.415675] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 9.415731] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 9.423537] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 9.423693] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 9.435328] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 9.435392] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 9.742407] usbcore: registered new interface driver uas [ 9.957114] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.178074] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 10.284391] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 10.458065] Console: switching to colour dummy device 80x30 [ 10.478584] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 10.538462] Registered IR keymap rc-cec [ 10.538757] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0 [ 10.539026] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0 [ 10.606886] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 10.636823] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 10.637586] usbcore: registered new interface driver brcmfmac [ 10.698630] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 10.701146] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 10.702591] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 10.703049] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 10.703549] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 10.703927] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 10.880032] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 10.885885] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897 [ 10.885938] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes [ 12.210478] 8021q: 802.1Q VLAN Support v1.8 [ 12.297699] uart-pl011 3f201000.serial: no DMA platform data [ 12.511107] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 12.513946] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 12.514092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.548834] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 18.320883] systemd-journald[141]: File /var/log/journal/ab9cde5d4ec7411ebcc30b6697e7d8d1/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 18.707443] Bluetooth: Core ver 2.22 [ 18.707556] NET: Registered PF_BLUETOOTH protocol family [ 18.707562] Bluetooth: HCI device and connection manager initialized [ 18.707584] Bluetooth: HCI socket layer initialized [ 18.707594] Bluetooth: L2CAP socket layer initialized [ 18.707614] Bluetooth: SCO socket layer initialized [ 18.742434] Bluetooth: HCI UART driver ver 2.3 [ 18.742460] Bluetooth: HCI UART protocol H4 registered [ 18.742554] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 18.742713] Bluetooth: HCI UART protocol Broadcom registered [ 19.569171] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.569195] Bluetooth: BNEP filters: protocol multicast [ 19.569212] Bluetooth: BNEP socket layer initialized [ 19.575503] Bluetooth: MGMT ver 1.22 [ 19.603243] NET: Registered PF_ALG protocol family [ 19.660560] cryptd: max_cpu_qlen set to 1000 [ 20.067027] Bluetooth: RFCOMM TTY layer initialized [ 20.067064] Bluetooth: RFCOMM socket layer initialized [ 20.067087] Bluetooth: RFCOMM ver 1.11 [ 29.025557] EXT4-fs (sda1): recovery complete [ 29.448418] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. pi@pi:~ $
Additional context
please help me in good way. not just to give a command and say try this try that :( if is need i will give to some one remote control directly to my pi 3b+