search

raspberrypi / rpicam-apps

BSD 2-Clause "Simplified" License
389 stars 211 forks source link

[BUG] UDP Network Stream crashed after a few hours #240

Closed lazarusCantini closed 2 years ago

lazarusCantini commented 2 years ago

Describe the bug ERROR RPISTREAM rpi_stream.cpp:242 I have tried a several Times to hold a stream for continues surveilance via the libcamera app on a headless Raspberry without Preview Window. No try has worked for more than one day. I Shortened the Verbose Bug Report.

Bug report `-------------------------------------------------------------------------------- libcamera-apps Bug Report

Date: 28-01-2022 (16:58:03) Command: /usr/local/bin/camera-bug-report -o bug_report_long_stream_4.txt -c libcamera-vid -t 0 -v --width 1080 --height 720 -n --codec mjpeg -o udp://192.168.178.2:8672

Hardware information

hostname raspberrypi

cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3

processor : 1 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3

processor : 2 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3

processor : 3 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3

Hardware : BCM2711 Revision : b03111 Serial : 1000000048be2eba Model : Raspberry Pi 4 Model B Rev 1.1

Configuration

cat /boot/cmdline.txt console=serial0,115200 console=tty1 root=PARTUUID=a8cc43ed-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles

cat /boot/config.txt

For more options and information see

http://rpf.io/configtxt

Some settings may impact device functionality. See link above for details

uncomment if you get no picture on HDMI for a default "safe" mode

hdmi_safe=1

uncomment the following to adjust overscan. Use positive numbers if console

goes off screen, and negative if there is too much border

overscan_left=16

overscan_right=16

overscan_top=16

overscan_bottom=16

uncomment to force a console size. By default it will be display's size minus

overscan.

framebuffer_width=1280

framebuffer_height=720

uncomment if hdmi display is not detected and composite is being output

hdmi_force_hotplug=1

uncomment to force a specific HDMI mode (this will force VGA)

hdmi_group=1

hdmi_mode=1

uncomment to force a HDMI mode rather than DVI. This can make audio work in

DMT (computer monitor) modes

hdmi_drive=2

uncomment to increase signal to HDMI, if you have interference, blanking, or

no display

config_hdmi_boost=4

uncomment for composite PAL

sdtv_mode=2

uncomment to overclock the arm. 700 MHz is the default.

arm_freq=800

Uncomment some or all of these to enable the optional hardware interfaces

dtparam=i2c_arm=on

dtparam=i2s=on

dtparam=spi=on

Uncomment this to enable infrared communication.

dtoverlay=gpio-ir,gpio_pin=17

dtoverlay=gpio-ir-tx,gpio_pin=18

Additional overlays and parameters are documented /boot/overlays/README

Enable audio (loads snd_bcm2835)

dtparam=audio=on

Automatically load overlays for detected cameras

!!!!!!!!!!!!!Von mir veraendert um einen Bug bei der Kamera App auszubuegeln. Sollte irgendwann vermutlich wieder raus

camera_auto_detect=0

Automatically load overlays for detected DSI displays

display_auto_detect=1

Enable DRM VC4 V3D driver

!!!!!!!!!!!!!Von mir veraendert um einen Bug bei der Kamera App auszubuegeln. Sollte irgendwann vermutlich wieder raus

dtoverlay=imx219

max_framebuffers=2

Disable compensation for displays with overscan

disable_overscan=1

[cm4]

Enable host mode on the 2711 built-in XHCI USB controller.

This line should be removed if the legacy DWC2 controller is required

(e.g. for USB device mode) or if USB support is not required.

otg_mode=1

[all]

dtoverlay=vc4-kms-v3d

dtoverlay=imx219

[pi4]

Run as fast as firmware / board allows

arm_boost=1

[all]

dtoverlay=vc4-kms-v3d

gpu_mem=256 dtoverlay=disable-wifi dtoverlay=disable-bt

Logs

dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.92-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1514 SMP Mon Jan 17 17:38:03 GMT 2022 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] random: fast init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] On node 0 totalpages: 458752 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 262144 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u81920 [ 0.000000] pcpu-alloc: s50828 r8192 d22900 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 457024 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:57:75:50 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=a8cc43ed-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000025a00000-0x0000000029a00000] (64MB) [ 0.000000] Memory: 1667328K/1835008K available (10240K kernel code, 1366K rwdata, 3196K rodata, 2048K init, 882K bss, 102144K reserved, 65536K cma-reserved, 1048576K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 34360 entries in 101 pages [ 0.000000] ftrace: allocated 101 pages with 4 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=1 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000026] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000085] bcm2835: system timer (irq = 25) [ 0.000755] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000773] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000791] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000806] Switching to timer-based delay loop, resolution 18ns [ 0.001074] Console: colour dummy device 80x30 [ 0.001140] printk: console [tty1] enabled [ 0.001196] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.001229] pid_max: default: 32768 minimum: 301 [ 0.001394] LSM: Security Framework initializing [ 0.001580] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001606] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003063] cgroup: Disabling memory control group subsystem [ 0.003294] CPU: Testing write buffer coherency: ok [ 0.003752] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004955] Setting up static identity map for 0x200000 - 0x20003c [ 0.005152] rcu: Hierarchical SRCU implementation. [ 0.006087] smp: Bringing up secondary CPUs ... [ 0.007291] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.008662] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.009968] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010126] smp: Brought up 1 node, 4 CPUs [ 0.010147] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.010163] CPU: All CPU(s) started in HYP mode. [ 0.010177] CPU: Virtualization extensions available. [ 0.011035] devtmpfs: initialized [ 0.025747] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.025980] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.026009] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.027910] pinctrl core: initialized pinctrl subsystem [ 0.028952] NET: Registered protocol family 16 [ 0.033005] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.033785] audit: initializing netlink subsys (disabled) [ 0.034045] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [ 0.034621] thermal_sys: Registered thermal governor 'step_wise' [ 0.035425] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.035442] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.035856] Serial: AMBA PL011 UART driver [ 0.069264] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.080839] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-01-20T13:56:48, variant start [ 0.090851] raspberrypi-firmware soc:firmware: Firmware hash is bd88f66f8952d34e4e0613a85c7a6d3da49e13e2 [ 0.131756] Kprobes globally optimized [ 0.137184] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.142097] vgaarb: loaded [ 0.142581] SCSI subsystem initialized [ 0.142795] usbcore: registered new interface driver usbfs [ 0.142866] usbcore: registered new interface driver hub [ 0.142937] usbcore: registered new device driver usb [ 0.143294] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.145284] clocksource: Switched to clocksource arch_sys_counter [ 1.171289] VFS: Disk quotas dquot_6.6.0 [ 1.171393] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.171574] FS-Cache: Loaded [ 1.171748] CacheFiles: Loaded [ 1.180981] NET: Registered protocol family 2 [ 1.181216] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.182556] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.182612] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.182757] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.182825] TCP: Hash tables configured (established 8192 bind 8192) [ 1.182989] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.183027] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.183258] NET: Registered protocol family 1 [ 1.184029] RPC: Registered named UNIX socket transport module. [ 1.184045] RPC: Registered udp transport module. [ 1.184061] RPC: Registered tcp transport module. [ 1.184076] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.184099] PCI: CLS 0 bytes, default 64 [ 1.187168] Initialise system trusted keyrings [ 1.187423] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.195729] zbud: loaded [ 1.197946] FS-Cache: Netfs 'nfs' registered for caching [ 1.198721] NFS: Registering the id_resolver key type [ 1.198778] Key type id_resolver registered [ 1.198793] Key type id_legacy registered [ 1.198943] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.198960] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.200014] Key type asymmetric registered [ 1.200031] Asymmetric key parser 'x509' registered [ 1.200223] bounce: pool size: 64 pages [ 1.200277] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.200487] io scheduler mq-deadline registered [ 1.200504] io scheduler kyber registered [ 1.205066] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.205097] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.205178] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.205324] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000 [ 1.267393] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.267781] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.267802] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.267824] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.267916] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.268160] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.271805] PCI: bus0: Fast back to back transfers disabled [ 1.272175] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.272304] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.272742] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.276378] PCI: bus1: Fast back to back transfers disabled [ 1.276476] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.276501] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.276583] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.276609] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.277031] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.277263] pcieport 0000:00:00.0: PME: Signaling with IRQ 63 [ 1.278248] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver. [ 1.278298] bcm2708_fb: probe of soc:fb failed with error -2 [ 1.284392] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 1.287468] iproc-rng200 fe104000.rng: hwrng registered [ 1.287774] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.289169] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.301459] brd: module loaded [ 1.313728] loop: module loaded [ 1.315547] Loading iSCSI transport class v2.0-870. [ 1.318793] libphy: Fixed MDIO Bus: probed [ 1.320497] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.335366] libphy: bcmgenet MII bus: probed [ 1.435462] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.436635] usbcore: registered new interface driver r8152 [ 1.436704] usbcore: registered new interface driver lan78xx [ 1.436778] usbcore: registered new interface driver smsc95xx [ 1.438393] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [ 1.438558] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.438593] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.441938] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000e0000000890 [ 1.443280] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.443299] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.443316] usb usb1: Product: xHCI Host Controller [ 1.443333] usb usb1: Manufacturer: Linux 5.10.92-v7l+ xhci-hcd [ 1.443349] usb usb1: SerialNumber: 0000:01:00.0 [ 1.444075] hub 1-0:1.0: USB hub found [ 1.444175] hub 1-0:1.0: 1 port detected [ 1.444848] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.444876] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.444901] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.445502] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.445520] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.445538] usb usb2: Product: xHCI Host Controller [ 1.445554] usb usb2: Manufacturer: Linux 5.10.92-v7l+ xhci-hcd [ 1.445571] usb usb2: SerialNumber: 0000:01:00.0 [ 1.446292] hub 2-0:1.0: USB hub found [ 1.446393] hub 2-0:1.0: 4 ports detected [ 1.448135] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.448450] dwc_otg: FIQ enabled [ 1.448464] dwc_otg: NAK holdoff enabled [ 1.448479] dwc_otg: FIQ split-transaction FSM enabled [ 1.448496] Module dwc_common_port init [ 1.448919] usbcore: registered new interface driver uas [ 1.449026] usbcore: registered new interface driver usb-storage [ 1.449239] mousedev: PS/2 mouse device common for all mice [ 1.450903] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.454328] sdhci: Secure Digital Host Controller Interface driver [ 1.454343] sdhci: Copyright(c) Pierre Ossman [ 1.454963] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.458171] ledtrig-cpu: registered to indicate activity on CPUs [ 1.458517] hid: raw HID events driver (C) Jiri Kosina [ 1.458706] usbcore: registered new interface driver usbhid [ 1.458721] usbhid: USB HID core driver [ 1.464739] Initializing XFRM netlink socket [ 1.464781] NET: Registered protocol family 17 [ 1.464887] Key type dns_resolver registered [ 1.465639] Registering SWP/SWPB emulation handler [ 1.465807] registered taskstats version 1 [ 1.465835] Loading compiled-in X.509 certificates [ 1.466697] Key type ._fscrypt registered [ 1.466714] Key type .fscrypt registered [ 1.466729] Key type fscrypt-provisioning registered [ 1.478551] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.478815] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.478890] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [ 1.486817] printk: console [ttyAMA0] enabled [ 1.495451] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.498799] of_cfs_init [ 1.499050] of_cfs_init: OK [ 1.534319] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 1.535243] Waiting for root device PARTUUID=a8cc43ed-02... [ 1.633626] mmc0: new ultra high speed DDR50 SDHC card at address 0001 [ 1.634591] mmcblk0: mmc0:0001 EB1QT 29.8 GiB [ 1.636784] mmcblk0: p1 p2 [ 1.665179] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.665252] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.666173] devtmpfs: mounted [ 1.676291] Freeing unused kernel memory: 2048K [ 1.715641] Run /sbin/init as init process [ 1.715656] with arguments: [ 1.715670] /sbin/init [ 1.715685] splash [ 1.715699] with environment: [ 1.715713] HOME=/ [ 1.715727] TERM=linux [ 1.735335] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.928241] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.928263] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.928280] usb 1-1: Product: USB2.0 Hub [ 1.930274] hub 1-1:1.0: USB hub found [ 1.930555] hub 1-1:1.0: 4 ports detected [ 2.061596] systemd[1]: System time before build time, advancing clock. [ 2.157610] NET: Registered protocol family 10 [ 2.158985] Segment Routing with IPv6 [ 2.222360] systemd[1]: systemd 247.3-6+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.223245] systemd[1]: Detected architecture arm. [ 2.225221] systemd[1]: Set hostname to . [ 2.357341] uart-pl011 fe201000.serial: no DMA platform data [ 2.944956] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 3.140259] systemd[1]: Queued start job for default target Graphical Interface. [ 3.141828] random: systemd: uninitialized urandom read (16 bytes read) [ 3.144289] systemd[1]: Created slice system-getty.slice. [ 3.144638] random: systemd: uninitialized urandom read (16 bytes read) [ 3.145788] systemd[1]: Created slice system-modprobe.slice. [ 3.145907] random: systemd: uninitialized urandom read (16 bytes read) [ 3.146818] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 3.147824] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.148659] systemd[1]: Created slice User and Session Slice. [ 3.149209] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.150282] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.151075] systemd[1]: Reached target Slices. [ 3.151357] systemd[1]: Reached target Swap. [ 3.152431] systemd[1]: Listening on Syslog Socket. [ 3.153172] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.153641] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.154745] systemd[1]: Listening on Journal Audit Socket. [ 3.155897] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.156862] systemd[1]: Listening on Journal Socket. [ 3.162340] systemd[1]: Listening on udev Control Socket. [ 3.163229] systemd[1]: Listening on udev Kernel Socket. [ 3.164098] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 3.169013] systemd[1]: Mounting POSIX Message Queue File System... [ 3.174930] systemd[1]: Mounting RPC Pipe File System... [ 3.181407] systemd[1]: Mounting Kernel Debug File System... [ 3.188203] systemd[1]: Mounting Kernel Trace File System... [ 3.188800] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 3.200855] systemd[1]: Starting Restore / save the current clock... [ 3.210479] systemd[1]: Starting Set the console keyboard layout... [ 3.217653] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.224464] systemd[1]: Starting Load Kernel Module configfs... [ 3.232265] systemd[1]: Starting Load Kernel Module drm... [ 3.239754] systemd[1]: Starting Load Kernel Module fuse... [ 3.248196] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 3.254124] systemd[1]: Starting File System Check on Root Device... [ 3.270099] systemd[1]: Starting Journal Service... [ 3.279807] systemd[1]: Starting Load Kernel Modules... [ 3.286979] systemd[1]: Starting Coldplug All udev Devices... [ 3.292968] fuse: init (API version 7.32) [ 3.308239] systemd[1]: Mounted POSIX Message Queue File System. [ 3.309109] systemd[1]: Mounted RPC Pipe File System. [ 3.309889] systemd[1]: Mounted Kernel Debug File System. [ 3.323412] systemd[1]: Mounted Kernel Trace File System. [ 3.325908] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.328786] systemd[1]: modprobe@configfs.service: Succeeded. [ 3.330203] systemd[1]: Finished Load Kernel Module configfs. [ 3.332640] systemd[1]: modprobe@fuse.service: Succeeded. [ 3.334185] systemd[1]: Finished Load Kernel Module fuse. [ 3.347763] systemd[1]: Mounting FUSE Control File System... [ 3.360301] systemd[1]: Mounting Kernel Configuration File System... [ 3.371839] systemd[1]: Started File System Check Daemon to report status. [ 3.374018] i2c /dev entries driver [ 3.406757] systemd[1]: Finished Restore / save the current clock. [ 3.408910] systemd[1]: modprobe@drm.service: Succeeded. [ 3.410542] systemd[1]: Finished Load Kernel Module drm. [ 3.413147] systemd[1]: Finished Load Kernel Modules. [ 3.414221] systemd[1]: Mounted FUSE Control File System. [ 3.445761] systemd[1]: Starting Apply Kernel Variables... [ 3.464454] systemd[1]: Mounted Kernel Configuration File System. [ 3.509821] systemd[1]: Finished Apply Kernel Variables. [ 3.550785] systemd[1]: Finished File System Check on Root Device. [ 3.556606] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.598903] systemd[1]: Started Journal Service. [ 3.718256] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 3.783649] systemd-journald[133]: Received client request to flush runtime journal. [ 3.802619] systemd-journald[133]: File /var/log/journal/86e24053a87844d8a883148b7c0d4f2e/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 4.896221] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 4.896802] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 4.897328] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 4.897871] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 5.043785] mc: Linux media interface: v0.10 [ 5.079049] videodev: Linux video capture interface: v2.00 [ 5.120459] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.120934] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.122583] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[ 5.123867] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 5.126523] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.135688] [vc_sm_connected_init]: installed successfully [ 5.138553] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.138560] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.149393] bcm2835_audio bcm2835_audio: card created with 8 channels [ 5.151919] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 5.153076] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 5.159066] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 5.167649] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 5.168160] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 5.168556] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 5.168854] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 5.168883] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 5.168908] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 5.168931] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 5.168954] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 5.181148] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 5.186001] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 5.186718] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 5.187158] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 5.187187] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 5.187194] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 5.187226] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 5.187238] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 5.187256] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 5.187279] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 5.187580] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 5.201859] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.204538] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 5.204583] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 5.225921] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 5.225966] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 5.234192] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 5.234261] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 5.245860] i2c i2c-22: Added multiplexed i2c bus 0 [ 5.247017] i2c i2c-22: Added multiplexed i2c bus 10 [ 6.668063] 8021q: 802.1Q VLAN Support v1.8 [ 7.021060] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.025450] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 7.055509] imx219 10-0010: Consider updating driver imx219 to match on endpoints [ 7.121065] random: crng init done [ 7.121079] random: 7 urandom warning(s) missed due to ratelimiting [ 7.146182] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.205283] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 7.408308] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 7.411743] bcmgenet fd580000.ethernet eth0: Link is Down [ 11.595530] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 11.595559] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.038038] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [ 31.835338] cam-dummy-reg: disabling [ 31.835361] cam1-reg: disabling

sudo vcdbg log msg 004688.004: arasan: arasan_emmc_open 005136.309: brfs: File read: /mfs/sd/config.txt 005137.434: brfs: File read: 2434 bytes 005187.857: HDMI0:EDID error reading EDID block 0 attempt 0 005193.881: HDMI0:EDID error reading EDID block 0 attempt 1 005199.906: HDMI0:EDID error reading EDID block 0 attempt 2 005205.928: HDMI0:EDID error reading EDID block 0 attempt 3 005211.953: HDMI0:EDID error reading EDID block 0 attempt 4 005217.976: HDMI0:EDID error reading EDID block 0 attempt 5 005224.001: HDMI0:EDID error reading EDID block 0 attempt 6 005230.023: HDMI0:EDID error reading EDID block 0 attempt 7 005236.047: HDMI0:EDID error reading EDID block 0 attempt 8 005242.070: HDMI0:EDID error reading EDID block 0 attempt 9 005243.085: HDMI0:EDID giving up on reading EDID block 0 005263.451: HDMI1:EDID error reading EDID block 0 attempt 0 005269.474: HDMI1:EDID error reading EDID block 0 attempt 1 005275.498: HDMI1:EDID error reading EDID block 0 attempt 2 005281.521: HDMI1:EDID error reading EDID block 0 attempt 3 005287.545: HDMI1:EDID error reading EDID block 0 attempt 4 005293.567: HDMI1:EDID error reading EDID block 0 attempt 5 005299.591: HDMI1:EDID error reading EDID block 0 attempt 6 005305.614: HDMI1:EDID error reading EDID block 0 attempt 7 005311.639: HDMI1:EDID error reading EDID block 0 attempt 8 005317.661: HDMI1:EDID error reading EDID block 0 attempt 9 005318.676: HDMI1:EDID giving up on reading EDID block 0 005320.481: brfs: File read: /mfs/sd/config.txt 006605.660: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined 006608.183: *** Restart logging 006608.203: brfs: File read: 2434 bytes 006613.727: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0 006619.755: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1 006625.780: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2 006631.806: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3 006637.831: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4 006643.857: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5 006649.881: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6 006655.909: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7 006661.932: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8 006667.959: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9 006668.975: hdmi: HDMI0:EDID giving up on reading EDID block 0 006674.020: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0 006680.047: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1 006686.072: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2 006692.098: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3 006698.123: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4 006704.149: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5 006710.173: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6 006716.200: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7 006722.224: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8 006728.250: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9 006729.265: hdmi: HDMI0:EDID giving up on reading EDID block 0 006729.285: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead 006734.328: hdmi: HDMI1:EDID error reading EDID block 0 attempt 0 006740.352: hdmi: HDMI1:EDID error reading EDID block 0 attempt 1 006746.379: hdmi: HDMI1:EDID error reading EDID block 0 attempt 2 006752.403: hdmi: HDMI1:EDID error reading EDID block 0 attempt 3 006758.431: hdmi: HDMI1:EDID error reading EDID block 0 attempt 4 006764.455: hdmi: HDMI1:EDID error reading EDID block 0 attempt 5 006770.482: hdmi: HDMI1:EDID error reading EDID block 0 attempt 6 006776.506: hdmi: HDMI1:EDID error reading EDID block 0 attempt 7 006782.533: hdmi: HDMI1:EDID error reading EDID block 0 attempt 8 006788.557: hdmi: HDMI1:EDID error reading EDID block 0 attempt 9 006789.575: hdmi: HDMI1:EDID giving up on reading EDID block 0 006794.615: hdmi: HDMI1:EDID error reading EDID block 0 attempt 0 006800.639: hdmi: HDMI1:EDID error reading EDID block 0 attempt 1 006806.666: hdmi: HDMI1:EDID error reading EDID block 0 attempt 2 006812.690: hdmi: HDMI1:EDID error reading EDID block 0 attempt 3 006818.717: hdmi: HDMI1:EDID error reading EDID block 0 attempt 4 006824.741: hdmi: HDMI1:EDID error reading EDID block 0 attempt 5 006830.767: hdmi: HDMI1:EDID error reading EDID block 0 attempt 6 006836.792: hdmi: HDMI1:EDID error reading EDID block 0 attempt 7 006842.818: hdmi: HDMI1:EDID error reading EDID block 0 attempt 8 006848.842: hdmi: HDMI1:EDID error reading EDID block 0 attempt 9 006849.860: hdmi: HDMI1:EDID giving up on reading EDID block 0 006849.877: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead 006849.890: HDMI0: hdmi_pixel_encoding: 300000000 006849.904: HDMI1: hdmi_pixel_encoding: 300000000 006854.668: dtb_file 'bcm2711-rpi-4-b.dtb' 006860.581: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb 006860.598: Loading 'bcm2711-rpi-4-b.dtb' to 0x100 size 0xc957 006873.808: brfs: File read: 51543 bytes 006886.684: brfs: File read: /mfs/sd/overlays/overlay_map.dtb 006953.545: brfs: File read: 1703 bytes 006955.985: brfs: File read: /mfs/sd/config.txt 006956.482: dtparam: audio=on 006967.009: brfs: File read: 2434 bytes 006974.706: brfs: File read: /mfs/sd/overlays/imx219.dtbo 007013.504: Loaded overlay 'imx219' 007067.762: brfs: File read: 2951 bytes 007071.432: brfs: File read: /mfs/sd/overlays/disable-wifi.dtbo 007080.117: Loaded overlay 'disable-wifi' 007094.076: brfs: File read: 387 bytes 007098.574: brfs: File read: /mfs/sd/overlays/disable-bt.dtbo 007113.224: Loaded overlay 'disable-bt' 007154.913: brfs: File read: 1073 bytes 007156.808: brfs: File read: /mfs/sd/cmdline.txt 007156.852: Read command line from file 'cmdline.txt': 007156.864: 'console=serial0,115200 console=tty1 root=PARTUUID=a8cc43ed-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles' 007263.832: brfs: File read: 148 bytes 007879.079: brfs: File read: /mfs/sd/kernel7l.img 007879.101: Loading 'kernel7l.img' to 0x8000 size 0x679a48 007879.126: Device tree loaded to 0x2eff2e00 (size 0xd12a) 007909.639: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined 010399.331: vchiq_core: vchiq_init_state: slot_zero = 0xead80000, is_master = 1

sudo vcdbg log assert No messages available

sudo vcdbg log ex No exceptions found

Memory

cat /proc/meminfo MemTotal: 1734912 kB MemFree: 68064 kB MemAvailable: 64248 kB Buffers: 14360 kB Cached: 44344 kB SwapCached: 3340 kB Active: 104484 kB Inactive: 1508404 kB Active(anon): 61152 kB Inactive(anon): 1492948 kB Active(file): 43332 kB Inactive(file): 15456 kB Unevictable: 16 kB Mlocked: 16 kB HighTotal: 1048576 kB HighFree: 7208 kB LowTotal: 686336 kB LowFree: 60856 kB SwapTotal: 102396 kB SwapFree: 9984 kB Dirty: 272 kB Writeback: 16 kB AnonPages: 1550764 kB Mapped: 26196 kB Shmem: 76 kB KReclaimable: 12936 kB Slab: 29568 kB SReclaimable: 12936 kB SUnreclaim: 16632 kB KernelStack: 1304 kB PageTables: 8316 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 969852 kB Committed_AS: 3570316 kB VmallocTotal: 245760 kB VmallocUsed: 3736 kB VmallocChunk: 0 kB Percpu: 528 kB CmaTotal: 65536 kB CmaFree: 23792 kB

sudo cat /sys/kernel/debug/dma_buf/bufinfo

Dma-buf Objects: size flags mode count exp_name ino
00032768 00000002 00080007 00000001 heap_helpers 04380653 ls_grid Attached Devices: Total 0 devices attached

Total 1 objects, 32768 bytes

sudo cat /sys/kernel/debug/vcsm-cma/state

VC-ServiceHandle 63786843

Resources

Resource fb9c9bf1 NAME sm-host-resource SIZE 32768 DMABUF 244c3ff3 ATTACH 00000000 SGT 00000000 DMA_ADDR 0x00000000eadc8000 VC_HANDLE c000000d VC_MAPPING 2

Total resource count: 1

Media Devices

media-ctl -d 0 -p Media controller API version 5.10.92

Media device information

driver bcm2835-isp model bcm2835-isp serial
bus info platform:bcm2835-isp hw revision 0x0 driver version 5.10.92

Device topology

media-ctl -d 1 -p Media controller API version 5.10.92

Media device information

driver bcm2835-isp model bcm2835-isp serial
bus info platform:bcm2835-isp hw revision 0x0 driver version 5.10.92

Device topology

media-ctl -d 2 -p Media controller API version 5.10.92

Media device information

driver unicam model unicam serial
bus info platform:fe801000.csi hw revision 0x0 driver version 5.10.92

Device topology

media-ctl -d 3 -p Media controller API version 5.10.92

Media device information

driver bcm2835-codec model bcm2835-codec serial 0000 bus info platform:bcm2835-codec hw revision 0x1 driver version 5.10.92

Device topology

media-ctl -d 4 -p Failed to enumerate /dev/media4 (-2)

Cameras

libcamera-vid --list-cameras [79:28:56.396482483] [15441] INFO Camera camera_manager.cpp:293 libcamera v0.0.0+3384-44d59841 [79:28:56.460710157] [15443] WARN RPI raspberrypi.cpp:1202 Mismatch between Unicam and CamHelper for embedded data usage! [79:28:56.461376311] [15443] INFO RPI raspberrypi.cpp:1313 Registered camera /base/soc/i2c0mux/i2c@1/imx219@10 to Unicam device /dev/media2 and ISP device /dev/media0 Available cameras

0 : imx219 [3280x2464] (/base/soc/i2c0mux/i2c@1/imx219@10) Modes: 'SBGGR10_CSI2P' : 640x480 1640x1232 1920x1080 3280x2464 'SBGGR8' : 640x480 1640x1232 1920x1080 3280x2464

Versions

uname -a Linux raspberrypi 5.10.92-v7l+ #1514 SMP Mon Jan 17 17:38:03 GMT 2022 armv7l GNU/Linux

cat /etc/os-release PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

vcgencmd version Jan 20 2022 13:56:48 Copyright (c) 2012 Broadcom version bd88f66f8952d34e4e0613a85c7a6d3da49e13e2 (clean) (release) (start)

libcamera-vid --version libcamera-apps build: 14e32b75ebba-intree 28-01-2022 (09:42:37) libcamera build: v0.0.0+3384-44d59841

libcamera-vid -t 0 -v --width 1080 --height 720 -n --codec mjpeg -o udp://192.168.178.2:8672

Options: verbose: 1 info_text:#%frame (%fps fps) exp %exp ag %ag dg %dg timeout: 0 width: 1080 height: 720 output: udp://192.168.178.2:8672 post_process_file: rawfull: 0 preview: none qt-preview: 0 transform: identity roi: all metering: centre exposure: normal ev: 0 awb: auto flush: false wrap: 0 brightness: 0 contrast: 1 saturation: 1 sharpness: 1 framerate: 30 denoise: auto viewfinder-width: 0 viewfinder-height: 0 tuning-file: (libcamera) lores-width: 0 lores-height: 0 mode: unspecified viewfinder-mode: unspecified bitrate: 0 profile: level:
intra: 0 inline: 0 save-pts: codec: mjpeg quality (for MJPEG): 50 keypress: 0 signal: 0 initial: record split: 0 segment: 0 circular: 0 Running without preview window Opening camera... [7:44:17.872144812] [4601] INFO Camera camera_manager.cpp:293 libcamera v0.0.0+3384-44d59841 [7:44:17.928134489] [4602] WARN RPI raspberrypi.cpp:1202 Mismatch between Unicam and CamHelper for embedded data usage! [7:44:17.929035215] [4602] INFO RPI raspberrypi.cpp:1313 Registered camera /base/soc/i2c0mux/i2c@1/imx219@10 to Unicam device /dev/media2 and ISP device /dev/media0 Acquired camera /base/soc/i2c0mux/i2c@1/imx219@10 Configuring video... [7:44:17.940633721] [4601] INFO Camera camera.cpp:1028 configuring streams: (0) 1080x720-YUV420 [7:44:17.940982363] [4602] INFO RPI raspberrypi.cpp:738 Sensor: /base/soc/i2c0mux/i2c@1/imx219@10 - Selected sensor format: 1920x1080-SBGGR10_1X10 - Selected unicam format: 1920x1080-pBAA Camera streams configured Buffers allocated and mapped Video setup complete Opened MjpegEncoder Requests created [7:44:18.050150785] [4613] INFO IPARPI raspberrypi.cpp:626 Request ctrl: Saturation = 1.000000 [7:44:18.050327078] [4613] INFO IPARPI raspberrypi.cpp:626 Request ctrl: Contrast = 1.000000 [7:44:18.050366540] [4613] INFO IPARPI raspberrypi.cpp:626 Request ctrl: Brightness = 0.000000 [7:44:18.050395503] [4613] INFO IPARPI raspberrypi.cpp:626 Request ctrl: AwbMode = 0 [7:44:18.050419780] [4613] INFO IPARPI raspberrypi.cpp:626 Request ctrl: Sharpness = 1.000000 [7:44:18.050446595] [4613] INFO IPARPI raspberrypi.cpp:626 Request ctrl: ExposureValue = 0.000000 [7:44:18.050516427] [4613] INFO IPARPI raspberrypi.cpp:626 Request ctrl: AeExposureMode = 0 [7:44:18.050560111] [4613] INFO IPARPI raspberrypi.cpp:626 Request ctrl: FrameDurationLimits = [ 33333, 33333 ] [7:44:18.050589129] [4613] INFO IPARPI raspberrypi.cpp:626 Request ctrl: AeMeteringMode = 0 [7:44:18.050611555] [4613] INFO IPARPI raspberrypi.cpp:626 Request ctrl: NoiseReductionMode = 1 [7:44:18.051301728] [4602] INFO RPISTREAM rpi_stream.cpp:133 No buffers available for ISP Output0 [7:44:18.051351524] [4602] INFO RPISTREAM rpi_stream.cpp:133 No buffers available for ISP Output0 [7:44:18.051369709] [4602] INFO RPISTREAM rpi_stream.cpp:133 No buffers available for ISP Output0 [7:44:18.051385801] [4602] INFO RPISTREAM rpi_stream.cpp:133 No buffers available for ISP Output0 [7:44:18.051401930] [4602] INFO RPISTREAM rpi_stream.cpp:133 No buffers available for ISP Output0 [7:44:18.051418041] [4602] INFO RPISTREAM rpi_stream.cpp:133 No buffers available for ISP Output0 Camera started! Viewfinder frame 0 NetOutput: output buffer 0xb500d008 size 72105 Viewfinder frame 1 NetOutput: output buffer 0xafb24468 size 72204 Viewfinder frame 2 NetOutput: output buffer 0xb17249b0 size 70014 Viewfinder frame 3 NetOutput: output buffer 0xb17249b0 size 69989 Viewfinder frame 4 NetOutput: output buffer 0xaf924468 size 69957 Viewfinder frame 5 NetOutput: output buffer 0xb17249b0 size 69830 Viewfinder frame 6 NetOutput: output buffer 0xb17249b0 size 69701 Viewfinder frame 7 NetOutput: output buffer 0xb17249b0 size 69674 Viewfinder frame 8 Viewfinder frame 9 NetOutput: output buffer 0xb0524468 size 69814 NetOutput: output buffer 0xafb24468 size 69789 Viewfinder frame 10 NetOutput: output buffer 0xafb24468 size 69561 Viewfinder frame 11 Viewfinder frame 12 NetOutput: output buffer 0xaf924468 size 69763 Viewfinder frame 13 NetOutput: output buffer 0xafb24468 size 69579 Viewfinder frame 14 NetOutput: output buffer 0xb0524468 size 69665 NetOutput: output buffer 0xb17249b0 size 69506 Viewfinder frame 15 Viewfinder frame 16 NetOutput: output buffer 0xaf924468 size 69696 NetOutput: output buffer 0xafb24468 size 69562 Viewfinder frame 17 NetOutput: output buffer 0xb0524468 size 69436 Viewfinder frame 18 Viewfinder frame 19 NetOutput: output buffer 0xb17249b0 size 69359 NetOutput: output buffer 0xb0524468 size 69280 Viewfinder frame 20 NetOutput: output buffer 0xafb24468 size 69526 Viewfinder frame 21 Viewfinder frame 22 ... . . ... Viewfinder frame 85892 NetOutput: output buffer 0xafb14660 size 64345 NetOutput: output buffer 0xaf914860 size 64277 Viewfinder frame 85893 Viewfinder frame 85894 NetOutput: output buffer 0xb0514a60 size 64278 NetOutput: output buffer 0xb17149a8 size 64390 Viewfinder frame 85895 Viewfinder frame 85896 NetOutput: output buffer 0xafb14660 size 64400 NetOutput: output buffer 0xaf914860 size 64370 Viewfinder frame 85897 Viewfinder frame 85898 NetOutput: output buffer 0xb0514a60 size 64201 NetOutput: output buffer 0xaf914860 size 64337 Viewfinder frame 85899 Viewfinder frame 85900 NetOutput: output buffer 0xafb14660 size 64395 NetOutput: output buffer 0xb0514a60 size 64316 Viewfinder frame 85901 NetOutput: output buffer 0xb17149a8 size 64239 Viewfinder frame 85902 Viewfinder frame 85903 NetOutput: output buffer 0xafb14660 size 64278 NetOutput: output buffer 0xb17149a8 size 64302 Viewfinder frame 85904 Viewfinder frame 85905 Viewfinder frame 85906 NetOutput: output buffer 0xaf914860 size 64298 NetOutput: output buffer 0xb0514a60 size 64419 NetOutput: output buffer 0xafb14660 size 64287 Viewfinder frame 85907 Viewfinder frame 85908 NetOutput: output buffer 0xb17149a8 size 64443 NetOutput: output buffer 0xaf914860 size 64404 Viewfinder frame 85909 NetOutput: output buffer 0xb0514a60 size 64418 Viewfinder frame 85910 NetOutput: output buffer 0xb17149a8 size 64182 Viewfinder frame 85911 Viewfinder frame 85912 NetOutput: output buffer 0xb17149a8 size 64375 Viewfinder frame 85913 NetOutput: output buffer 0xb0514a60 size 64275 NetOutput: output buffer 0xb1716360 size 64173 Viewfinder frame 85914 [8:32:07.920215288] [4602] ERROR RPISTREAM rpi_stream.cpp:242 NetOutput: output buffer 0xb0514a60 size 64422 Error: INTERRUPT `

davidplowman commented 2 years ago

Hi, thanks for reporting this. Actually I think it looks the same as some of the other recent reports, and we're investigating right now.

naushir commented 2 years ago

We have identified the cause of this problem, and a fix has been submitted for review/merge here. Hopefully this should be merged very soon.

naushir commented 2 years ago

The fixes for this issue have now been merged. You can get the latest libraries by doing:

sudo apt update
sudo apt upgrade

I'll close this issue down now, please re-open if you still have problems.