[BUG]

[Baiken1412]

Describe the bug My camera module 2 does not work anymore on my Pi 5. when I try rpicam-hello it will come up an error says no cameras available

I tried sudo vclog -m and dmesg, the log told me that a camera was detected 007117.437: Found camera 'imx219' on port 1, unicam_port 1 007185.673: Loaded overlay 'imx219'

Bug report bug-report.txt

Additional context

dmesg

kid@raspberrypi:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] [ 0.000000] Linux version 6.6.47-v8-16k+ (dom@buildbot) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1794 SMP PREEMPT Thu Aug 29 16:30:28 BST 2024 [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000002000000, size 320 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0000000002000000..0x0000000015ffffff (327680 KiB) map reusable linux,cma [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 [ 0.000000] OF: reserved mem: 0x000000003fd165e0..0x000000003fd16617 (0 KiB) nomap non-reusable nvram@0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 14 pages/cpu s183976 r8192 d37208 u229376 [ 0.000000] pcpu-alloc: s183976 r8192 d37208 u229376 alloc=14*16384 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: SSBS not fully self-synchronizing [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe smsc95xx.macaddr=2C:CF:67:70:A7:71 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=a2608f4a-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=AU [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521728 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB) [ 0.000000] Memory: 7891600K/8380416K available (13376K kernel code, 2224K rwdata, 4288K rodata, 5056K init, 1213K bss, 161136K reserved, 327680K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 43309 entries in 43 pages [ 0.000000] ftrace: allocated 43 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000164] Console: colour dummy device 80x25 [ 0.000168] printk: console [tty1] enabled [ 0.000205] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000210] pid_max: default: 32768 minimum: 301 [ 0.000231] LSM: initializing lsm=capability,integrity [ 0.000299] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) [ 0.000329] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) [ 0.000686] cgroup: Disabling memory control group subsystem [ 0.001098] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.001119] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.001141] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.001195] rcu: Hierarchical SRCU implementation. [ 0.001196] rcu: Max phase no-delay instances is 1000. [ 0.001767] EFI services will not be available. [ 0.001824] smp: Bringing up secondary CPUs ... [ 0.001970] Detected PIPT I-cache on CPU1 [ 0.002008] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] [ 0.002172] Detected PIPT I-cache on CPU2 [ 0.002204] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] [ 0.002356] Detected PIPT I-cache on CPU3 [ 0.002385] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] [ 0.002411] smp: Brought up 1 node, 4 CPUs [ 0.002416] SMP: Total of 4 processors activated. [ 0.002418] CPU features: detected: 32-bit EL0 Support [ 0.002420] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.002422] CPU features: detected: Common not Private translations [ 0.002424] CPU features: detected: CRC32 instructions [ 0.002426] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.002428] CPU features: detected: LSE atomic instructions [ 0.002430] CPU features: detected: Privileged Access Never [ 0.002431] CPU features: detected: RAS Extension Support [ 0.002434] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.002467] CPU: All CPU(s) started at EL2 [ 0.002468] alternatives: applying system-wide alternatives [ 0.004139] devtmpfs: initialized [ 0.007187] Enabled cp15_barrier support [ 0.007193] Enabled setend support [ 0.007254] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.007260] futex hash table entries: 1024 (order: 2, 65536 bytes, linear) [ 0.008124] pinctrl core: initialized pinctrl subsystem [ 0.008264] DMI not present or invalid. [ 0.008439] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.009032] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.009077] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.009125] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.009142] audit: initializing netlink subsys (disabled) [ 0.009192] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 [ 0.009315] thermal_sys: Registered thermal governor 'step_wise' [ 0.009328] cpuidle: using governor menu [ 0.009392] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.009419] ASID allocator initialised with 32768 entries [ 0.009728] Serial: AMBA PL011 UART driver [ 0.010637] bcm2835-mbox 107c013880.mailbox: mailbox enabled [ 0.010979] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 [ 0.010989] printk: console [ttyAMA10] enabled [ 0.015993] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-07-30T14:25:46, variant start_cd [ 0.019993] raspberrypi-firmware soc:firmware: Firmware hash is 790da7ef00000000000000000000000000000000 [ 0.026309] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL [ 0.026313] Modules: 0 pages in range for non-PLT usage [ 0.026314] Modules: 129412 pages in range for PLT usage [ 0.030618] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 [ 0.030991] iommu: Default domain type: Translated [ 0.030993] iommu: DMA domain TLB invalidation policy: strict mode [ 0.031090] SCSI subsystem initialized [ 0.031127] usbcore: registered new interface driver usbfs [ 0.031136] usbcore: registered new interface driver hub [ 0.031145] usbcore: registered new device driver usb [ 0.031231] pps_core: LinuxPPS API ver. 1 registered [ 0.031233] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.031237] PTP clock support registered [ 0.031513] vgaarb: loaded [ 0.031608] clocksource: Switched to clocksource arch_sys_counter [ 0.031716] VFS: Disk quotas dquot_6.6.0 [ 0.031728] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) [ 0.031756] FS-Cache: Loaded [ 0.032038] CacheFiles: Loaded [ 0.033368] NET: Registered PF_INET protocol family [ 0.033515] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear) [ 0.035943] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear) [ 0.035986] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear) [ 0.035990] TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear) [ 0.036260] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear) [ 0.037856] TCP: Hash tables configured (established 65536 bind 65536) [ 0.037988] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear) [ 0.038102] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear) [ 0.038202] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear) [ 0.038352] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.038495] RPC: Registered named UNIX socket transport module. [ 0.038498] RPC: Registered udp transport module. [ 0.038499] RPC: Registered tcp transport module. [ 0.038500] RPC: Registered tcp-with-tls transport module. [ 0.038502] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.038506] PCI: CLS 0 bytes, default 64 [ 0.038614] Trying to unpack rootfs image as initramfs... [ 0.047688] kvm [1]: IPA Size Limit: 40 bits [ 0.047714] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance) [ 0.047743] kvm [1]: vgic interrupt IRQ9 [ 0.047758] kvm [1]: VHE mode initialized successfully [ 0.282765] Freeing initrd memory: 17184K [ 0.317691] Initialise system trusted keyrings [ 0.317783] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.317803] zbud: loaded [ 0.317999] NFS: Registering the id_resolver key type [ 0.318006] Key type id_resolver registered [ 0.318009] Key type id_legacy registered [ 0.318015] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.318017] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.318075] F2FS not supported on PAGE_SIZE(16384) != 4096 [ 0.318126] Key type asymmetric registered [ 0.318128] Asymmetric key parser 'x509' registered [ 0.318143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.318190] io scheduler mq-deadline registered [ 0.318192] io scheduler kyber registered [ 0.318202] io scheduler bfq registered [ 0.318474] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 26) [ 0.318540] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 27) [ 0.318592] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 28) [ 0.318635] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 29) [ 0.318682] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 30) [ 0.318729] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 31) [ 0.320121] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes [ 0.320126] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840 [ 0.320250] Console: switching to colour frame buffer device 240x67 [ 0.321748] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered! [ 0.356432] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.356841] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART [ 0.356891] serial serial0: tty port ttyS0 registered [ 0.357208] iproc-rng200 107d208000.rng: hwrng registered [ 0.357269] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) [ 0.357496] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe [ 0.359401] brd: module loaded [ 0.360766] loop: module loaded [ 0.360880] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 0.361004] Loading iSCSI transport class v2.0-870. [ 0.361881] usbcore: registered new device driver r8152-cfgselector [ 0.361889] usbcore: registered new interface driver r8152 [ 0.361899] usbcore: registered new interface driver lan78xx [ 0.361906] usbcore: registered new interface driver smsc95xx [ 0.361965] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.361987] dwc_otg: FIQ enabled [ 0.361988] dwc_otg: NAK holdoff enabled [ 0.361990] dwc_otg: FIQ split-transaction FSM enabled [ 0.361992] Module dwc_common_port init [ 0.362111] usbcore: registered new interface driver uas [ 0.362119] usbcore: registered new interface driver usb-storage [ 0.362226] mousedev: PS/2 mouse device common for all mice [ 0.370676] rpi-rtc soc:rpi_rtc: registered as rtc0 [ 0.372207] rpi-rtc soc:rpi_rtc: setting system clock to 2024-09-03T05:37:20 UTC (1725341840) [ 0.372531] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! [ 0.372534] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.374946] sdhci: Secure Digital Host Controller Interface driver [ 0.374948] sdhci: Copyright(c) Pierre Ossman [ 0.374989] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.375187] ledtrig-cpu: registered to indicate activity on CPUs [ 0.375238] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.375250] hid: raw HID events driver (C) Jiri Kosina [ 0.375276] usbcore: registered new interface driver usbhid [ 0.375278] usbhid: USB HID core driver [ 0.375630] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available [ 0.375976] NET: Registered PF_PACKET protocol family [ 0.376003] Key type dns_resolver registered [ 0.381519] registered taskstats version 1 [ 0.381597] Loading compiled-in X.509 certificates [ 0.383928] Key type .fscrypt registered [ 0.383931] Key type fscrypt-provisioning registered [ 0.384615] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: [ 0.384622] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] [ 0.384634] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 [ 0.384640] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 [ 0.384649] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 [ 0.384654] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 [ 0.386044] brcm-pcie 1000120000.pcie: Forcing gen 2 [ 0.386300] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 [ 0.386304] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.386307] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) [ 0.386311] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) [ 0.386325] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 [ 0.386352] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.387267] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.491614] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) [ 0.491637] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 [ 0.491652] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] [ 0.491660] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] [ 0.491667] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] [ 0.491738] pci 0000:01:00.0: supports D1 [ 0.491740] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.503619] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.503628] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] [ 0.503632] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] [ 0.503638] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] [ 0.503643] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] [ 0.503648] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.503651] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] [ 0.503655] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 0.503665] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 0.503735] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 0.503770] pcieport 0000:00:00.0: PME: Signaling with IRQ 38 [ 0.503824] pcieport 0000:00:00.0: AER: enabled with IRQ 38 [ 0.503899] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 [ 0.503903] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 [ 0.503912] rp1 0000:01:00.0: enabling device (0000 -> 0002) [ 0.504760] rp1 0000:01:00.0: chip_id 0x20001927 [ 0.509614] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 100 [ 0.528407] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 106 (2c:cf:67:70:a7:71) [ 0.528502] platform 1f00128000.csi: Fixed dependency cycle(s) with /axi/pcie@120000/rp1/i2c@80000/imx219@10 [ 0.529066] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels [ 0.529333] xhci-hcd xhci-hcd.0: xHCI Host Controller [ 0.529339] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 [ 0.529786] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 [ 0.529800] xhci-hcd xhci-hcd.0: irq 131, io mem 0x1f00200000 [ 0.529864] xhci-hcd xhci-hcd.0: xHCI Host Controller [ 0.529867] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 [ 0.529871] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed [ 0.529921] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 0.529925] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.529928] usb usb1: Product: xHCI Host Controller [ 0.529930] usb usb1: Manufacturer: Linux 6.6.47-v8-16k+ xhci-hcd [ 0.529933] usb usb1: SerialNumber: xhci-hcd.0 [ 0.530064] hub 1-0:1.0: USB hub found [ 0.530079] hub 1-0:1.0: 2 ports detected [ 0.530221] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 0.530224] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.530227] usb usb2: Product: xHCI Host Controller [ 0.530229] usb usb2: Manufacturer: Linux 6.6.47-v8-16k+ xhci-hcd [ 0.530231] usb usb2: SerialNumber: xhci-hcd.0 [ 0.530321] hub 2-0:1.0: USB hub found [ 0.530333] hub 2-0:1.0: 1 port detected [ 0.530618] xhci-hcd xhci-hcd.1: xHCI Host Controller [ 0.530624] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 [ 0.531065] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 [ 0.531079] xhci-hcd xhci-hcd.1: irq 136, io mem 0x1f00300000 [ 0.531144] xhci-hcd xhci-hcd.1: xHCI Host Controller [ 0.531148] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 [ 0.531151] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed [ 0.531195] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 0.531198] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.531201] usb usb3: Product: xHCI Host Controller [ 0.531203] usb usb3: Manufacturer: Linux 6.6.47-v8-16k+ xhci-hcd [ 0.531205] usb usb3: SerialNumber: xhci-hcd.1 [ 0.531305] hub 3-0:1.0: USB hub found [ 0.531319] hub 3-0:1.0: 2 ports detected [ 0.531451] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 0.531454] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.531457] usb usb4: Product: xHCI Host Controller [ 0.531459] usb usb4: Manufacturer: Linux 6.6.47-v8-16k+ xhci-hcd [ 0.531461] usb usb4: SerialNumber: xhci-hcd.1 [ 0.531545] hub 4-0:1.0: USB hub found [ 0.531557] hub 4-0:1.0: 1 port detected [ 0.532195] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.532512] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu [ 0.532517] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu [ 0.532522] platform 1000800000.codec: Adding to iommu group 0 [ 0.532532] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu [ 0.532537] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu [ 0.532541] platform 1000880000.pisp_be: Adding to iommu group 0 [ 0.532577] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu [ 0.532580] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu [ 0.532584] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success [ 0.532934] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.533224] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu [ 0.533228] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu [ 0.533234] platform axi:gpu: Adding to iommu group 1 [ 0.533262] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu [ 0.533266] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success [ 0.533581] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.533886] platform 1f00128000.csi: bcm2712_iommu_probe_device: MMU 1000005280.iommu [ 0.533891] platform 1f00128000.csi: bcm2712_iommu_device_group: MMU 1000005280.iommu [ 0.533895] platform 1f00128000.csi: Adding to iommu group 2 [ 0.533901] platform 1f00128000.csi: bcm2712_iommu_attach_dev: MMU 1000005280.iommu [ 0.533904] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success [ 0.534704] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO [ 0.534820] mmc0: CQHCI version 5.10 [ 0.535188] of_cfs_init [ 0.535219] of_cfs_init: OK [ 0.535294] clk: Disabling unused clocks [ 0.545481] mmc1: CQHCI version 5.10 [ 0.571333] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit [ 0.669614] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 0.669847] mmcblk0: mmc0:aaaa SD512 477 GiB [ 0.670998] mmcblk0: p1 p2 [ 0.671091] mmcblk0: mmc0:aaaa SD512 477 GiB (quirks 0x00004000) [ 0.732165] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit [ 0.735200] Freeing unused kernel memory: 5056K [ 0.735245] Run /init as init process [ 0.735247] with arguments: [ 0.735248] /init [ 0.735250] splash [ 0.735251] with environment: [ 0.735252] HOME=/ [ 0.735254] TERM=linux [ 0.769377] mmc1: new ultra high speed DDR50 SDIO card at address 0001 [ 0.783635] usb 3-1: new full-speed USB device number 2 using xhci-hcd [ 0.951215] usb 3-1: New USB device found, idVendor=2efd, idProduct=7812, bcdDevice= 2.10 [ 0.951222] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 0.951225] usb 3-1: Product: USB Keyboard [ 0.951228] usb 3-1: Manufacturer: SONiX [ 0.964447] input: SONiX USB Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.0/0003:2EFD:7812.0001/input/input0 [ 1.087682] hid-generic 0003:2EFD:7812.0001: input,hidraw0: USB HID v1.11 Keyboard [SONiX USB Keyboard] on usb-xhci-hcd.1-1/input0 [ 1.408602] EXT4-fs (mmcblk0p2): mounted filesystem 12974fe2-889e-4060-b497-1d6ac3fbbb4b ro with ordered data mode. Quota mode: none. [ 1.729667] NET: Registered PF_INET6 protocol family [ 1.730059] Segment Routing with IPv6 [ 1.730066] In-situ OAM (IOAM) with IPv6 [ 1.761794] systemd[1]: systemd 252.30-1~deb12u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 1.761810] systemd[1]: Detected architecture arm64. [ 1.764782] systemd[1]: Hostname set to . [ 1.820000] uart-pl011 107d001000.serial: no DMA platform data [ 2.075874] systemd[1]: Queued start job for default target graphical.target. [ 2.092229] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 2.092533] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 2.092782] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 2.093029] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 2.093172] systemd[1]: Created slice user.slice - User and Session Slice. [ 2.093249] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 2.093430] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 2.093459] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-a2608f4a\x2d01.device - /dev/disk/by-partuuid/a2608f4a-01... [ 2.093474] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10... [ 2.093505] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 2.093545] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 2.093579] systemd[1]: Reached target slices.target - Slice Units. [ 2.093605] systemd[1]: Reached target swap.target - Swaps. [ 2.093635] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 2.093794] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 2.093857] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 2.094100] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 2.094213] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 2.094329] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 2.094467] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 2.094557] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 2.094708] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 2.095515] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 2.096531] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 2.097552] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 2.097761] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ 2.100277] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 2.101501] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 2.102785] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 2.104332] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 2.105966] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 2.107888] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 2.109936] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 2.112214] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 2.117103] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 2.117281] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 2.119275] systemd[1]: Starting systemd-journald.service - Journal Service... [ 2.122433] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.132777] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 2.134148] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 2.135395] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 2.137414] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 2.137714] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 2.137923] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 2.138302] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 2.138907] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 2.139065] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 2.139399] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 2.139550] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 2.139928] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 2.140104] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 2.140396] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 2.140544] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 2.141651] fuse: init (API version 7.39) [ 2.142028] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 2.150059] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 2.151376] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 2.151544] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 2.151799] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 2.153440] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 2.156109] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 2.159463] i2c_dev: i2c /dev entries driver [ 2.163121] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 2.165226] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 2.167101] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 2.171307] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 2.171456] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 2.183705] EXT4-fs (mmcblk0p2): re-mounted 12974fe2-889e-4060-b497-1d6ac3fbbb4b r/w. Quota mode: none. [ 2.184740] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 2.185121] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 2.185178] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 2.211908] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... [ 2.213429] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ 2.213830] systemd[1]: Started systemd-journald.service - Journal Service. [ 2.232215] systemd-journald[282]: Received client request to flush runtime journal. [ 3.392621] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 [ 3.394852] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 [ 3.394918] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 [ 3.394994] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 [ 3.395031] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 [ 3.395084] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 [ 3.395125] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 [ 3.395184] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 [ 3.395288] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 [ 3.395334] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 [ 3.426478] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode [ 3.426670] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode [ 3.426831] mc: Linux media interface: v0.10 [ 3.433032] input: pwr_button as /devices/platform/pwr_button/input/input1 [ 3.468510] Driver for 1-wire Dallas network protocol. [ 3.483207] gpio-575 (onewire@0): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 3.484594] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0 [ 3.529746] videodev: Linux video capture interface: v2.00 [ 3.552219] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.561637] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 3.561983] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 3.562313] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.562634] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.610003] rp1-cfe 1f00128000.csi: bcm2712_iommu_of_xlate: MMU 1000005280.iommu [ 3.610494] rp1-cfe 1f00128000.csi: DW dphy Host HW v1.20 [ 3.610509] rp1-cfe 1f00128000.csi: PiSP FE HW v0.1 [ 3.614841] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu [ 3.615883] rp1-cfe 1f00128000.csi: found subdevice /axi/pcie@120000/rp1/i2c@80000/imx219@10 [ 3.621025] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [ 3.621783] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu [ 3.751830] rpivid 1000800000.codec: Device registered as /dev/video19 [ 3.751909] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 3.766605] pispbe 1000880000.pisp_be: Runtime PM usage count underflow! [ 3.768339] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 3.843891] Bluetooth: Core ver 2.22 [ 3.843929] NET: Registered PF_BLUETOOTH protocol family [ 3.843932] Bluetooth: HCI device and connection manager initialized [ 3.843940] Bluetooth: HCI socket layer initialized [ 3.843944] Bluetooth: L2CAP socket layer initialized [ 3.843950] Bluetooth: SCO socket layer initialized [ 3.868748] Bluetooth: HCI UART driver ver 2.3 [ 3.868755] Bluetooth: HCI UART protocol H4 registered [ 3.868789] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 3.868930] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 3.868982] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 3.869013] Bluetooth: HCI UART protocol Broadcom registered [ 3.907014] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu [ 3.937385] Console: switching to colour dummy device 80x25 [ 3.939784] usbcore: registered new interface driver brcmfmac [ 3.942102] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4]) [ 3.944288] Registered IR keymap rc-cec [ 3.944482] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0 [ 3.944613] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input2 [ 3.947078] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/107c701400.hdmi/sound/card0/input3 [ 3.947698] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4]) [ 3.957766] Registered IR keymap rc-cec [ 3.958839] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1 [ 3.958910] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input4 [ 3.962883] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/107c706400.hdmi/sound/card1/input5 [ 3.963018] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4]) [ 3.963188] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4]) [ 3.963289] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4]) [ 3.963397] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 3.963473] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 4.020831] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1 [ 4.109118] Console: switching to colour frame buffer device 480x135 [ 4.115121] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) [ 4.115388] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b [ 4.127166] rp1-cfe 1f00128000.csi: Using sensor imx219 4-0010 for capture [ 4.127767] rp1-cfe 1f00128000.csi: Registered [rp1-cfe-csi2_ch0] node id 0 successfully as /dev/video0 [ 4.129021] rp1-cfe 1f00128000.csi: Registered [rp1-cfe-embedded] node id 1 successfully as /dev/video1 [ 4.129496] rp1-cfe 1f00128000.csi: Registered [rp1-cfe-csi2_ch2] node id 2 successfully as /dev/video2 [ 4.129682] rp1-cfe 1f00128000.csi: Registered [rp1-cfe-csi2_ch3] node id 3 successfully as /dev/video3 [ 4.129816] rp1-cfe 1f00128000.csi: Registered [rp1-cfe-fe_image0] node id 4 successfully as /dev/video4 [ 4.130985] rp1-cfe 1f00128000.csi: Registered [rp1-cfe-fe_image1] node id 5 successfully as /dev/video5 [ 4.133977] rp1-cfe 1f00128000.csi: Registered [rp1-cfe-fe_stats] node id 6 successfully as /dev/video6 [ 4.134673] rp1-cfe 1f00128000.csi: Registered [rp1-cfe-fe_config] node id 7 successfully as /dev/video7 [ 4.139032] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device [ 4.161615] alsactl[625]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 4.161615] alsactl[620]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 4.224106] Bluetooth: hci0: BCM: chip id 107 [ 4.224361] Bluetooth: hci0: BCM: features 0x2f [ 4.226785] Bluetooth: hci0: BCM4345C0 [ 4.226791] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 [ 4.232478] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch [ 4.586002] Adding 204784k swap on /var/swap. Priority:-2 extents:5 across:2088960k SS [ 4.681558] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.681567] Bluetooth: BNEP filters: protocol multicast [ 4.681573] Bluetooth: BNEP socket layer initialized [ 4.980295] Bluetooth: hci0: BCM: features 0x2f [ 4.981666] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 [ 4.981673] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 [ 4.981968] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) [ 5.001466] Bluetooth: MGMT ver 1.22 [ 5.009710] NET: Registered PF_ALG protocol family [ 5.411867] w1_master_driver w1_bus_master1: w1_search: max_slave_count 64 reached, will continue next search. [ 5.594396] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) [ 5.594408] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode [ 5.597836] pps pps0: new PPS source ptp0 [ 5.597898] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. [ 5.626659] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 8.581771] Bluetooth: RFCOMM TTY layer initialized [ 8.581786] Bluetooth: RFCOMM socket layer initialized [ 8.581798] Bluetooth: RFCOMM ver 1.11 [ 18.581616] input: MX Master 2S Keyboard as /devices/virtual/misc/uhid/0005:046D:B019.0002/input/input6 [ 18.581799] input: MX Master 2S Mouse as /devices/virtual/misc/uhid/0005:046D:B019.0002/input/input7 [ 18.586814] hid-generic 0005:046D:B019.0002: input,hidraw1: BLUETOOTH HID v0.06 Keyboard [MX Master 2S] on 2c:cf:67:70:a7:73 [ 53.197926] w1_master_driver w1_bus_master1: Family 0 for 00.800000000000.8c is not registered. [ 113.081707] w1_master_driver w1_bus_master1: Family 0 for 00.400000000000.46 is not registered. [ 160.896794] w1_master_driver w1_bus_master1: Family 0 for 00.c00000000000.ca is not registered. [ 186.104513] usb 3-1: USB disconnect, device number 2 [ 232.836259] w1_master_driver w1_bus_master1: Family 0 for 00.200000000000.23 is not registered. [ 260.357904] usb 3-1: new full-speed USB device number 3 using xhci-hcd [ 260.525629] usb 3-1: New USB device found, idVendor=2efd, idProduct=7812, bcdDevice= 2.10 [ 260.525636] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 260.525638] usb 3-1: Product: USB Keyboard [ 260.525640] usb 3-1: Manufacturer: SONiX [ 260.538870] input: SONiX USB Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.0/0003:2EFD:7812.0003/input/input9 [ 260.662044] hid-generic 0003:2EFD:7812.0003: input,hidraw0: USB HID v1.11 Keyboard [SONiX USB Keyboard] on usb-xhci-hcd.1-1/input0 [ 292.716496] w1_master_driver w1_bus_master1: Family 0 for 00.a00000000000.af is not registered. [ 328.476311] w1_master_driver w1_bus_master1: Family 0 for 00.600000000000.65 is not registered. [ 366.028036] w1_master_driver w1_bus_master1: Family 0 for 00.e00000000000.e9 is not registered. [ 425.488020] w1_master_driver w1_bus_master1: Family 0 for 00.100000000000.9d is not registered. [ 462.087912] w1_master_driver w1_bus_master1: Family 0 for 00.900000000000.11 is not registered. [ 533.187930] w1_master_driver w1_bus_master1: Family 0 for 00.500000000000.db is not registered. [ 581.848125] w1_master_driver w1_bus_master1: Family 0 for 00.d00000000000.57 is not registered. [ 606.500244] w1_master_driver w1_bus_master1: Family 0 for 00.300000000000.be is not registered. [ 653.368882] w1_master_driver w1_bus_master1: Family 0 for 00.b00000000000.32 is not registered. [ 690.088406] w1_master_driver w1_bus_master1: Family 0 for 00.700000000000.f8 is not registered. [ 719.241733] usb 3-1: USB disconnect, device number 3 [ 738.740387] w1_master_driver w1_bus_master1: Family 0 for 00.f00000000000.74 is not registered. [ 797.836346] w1_master_driver w1_bus_master1: Family 0 for 00.080000000000.c2 is not registered. [ 827.438018] usb 3-1: new full-speed USB device number 4 using xhci-hcd [ 827.605539] usb 3-1: New USB device found, idVendor=2efd, idProduct=7812, bcdDevice= 2.10 [ 827.605549] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 827.605553] usb 3-1: Product: USB Keyboard [ 827.605556] usb 3-1: Manufacturer: SONiX [ 827.618791] input: SONiX USB Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.0/0003:2EFD:7812.0004/input/input10 [ 827.766179] hid-generic 0003:2EFD:7812.0004: input,hidraw0: USB HID v1.11 Keyboard [SONiX USB Keyboard] on usb-xhci-hcd.1-1/input0 [ 847.392582] w1_master_driver w1_bus_master1: Family 0 for 00.880000000000.4e is not registered. [ 883.104585] w1_master_driver w1_bus_master1: Family 0 for 00.480000000000.84 is not registered.

sudo vclog -m

kid@raspberrypi:~ $ sudo vclog -m 005152.562: Initial voltage 800000 temp 46622 005350.006: avs_2712: AVS pred 8632 863200 temp 46622 005350.017: vpred 863 mV +0 006152.051: FB framebuffer_swap 1 006169.544: Select resolution HDMI0/2 hotplug 1 max_mode 2 006181.976: HDMI0 edid block 0 offset 0 006181.986: 00ffffffffffff001e6dc15b2b450400 006181.997: 051f010380462878ea40b5ae5142ad26 006182.007: 0f5054210800d1c06140010101010101 006182.018: 01010101010108e80030f2705a80b058 006182.029: 8a00b9882100001e000000fd00283c1e 006182.040: 873c000a202020202020000000fc004c 006182.051: 4720554c54524146494e450a000000ff 006182.061: 003130354e54464138373835310a019d 006194.491: HDMI0 edid block 1 offset 128 006194.502: 02034b7123090707830100004d010304 006194.511: 10121f202261605f5e5d6d030c002000 006194.520: b83c20006001020367d85dc401788003 006194.529: e30f0003e2006ae305c000e606050160 006194.538: 6050681a00000101283c00565e00a0a0 006194.547: a0295030203500b9882100001a1a3680 006194.556: a070381f402a263500b9882100001a00 006194.565: 00000000000000000000000000000003 006194.592: HDMI0: best-mode 2 (limit 2) 1920x1080 60 Hz CEA modes 1a00058005000000000000e003000000 extensions 1 006194.605: Select resolution HDMI1/2 hotplug 0 max_mode 2 006194.645: FB0 disp 0 max-fb 2 1920x1080 stride 3840 base 0x3f800000 007035.206: dtb_file 'bcm2712-rpi-5-b.dtb' 007117.437: Found camera 'imx219' on port 1, unicam_port 1 007185.673: Loaded overlay 'imx219' 007284.648: dtparam: audio=on 007289.137: Unknown dtparam 'audio' - ignored 007344.858: Loaded overlay 'vc4-kms-v3d-pi5' 007455.116: Loaded overlay 'w1-gpio-pi5' 010572.044: Starting OS 10572 ms 010574.676: 00000040: -> 00000480 010574.691: 00000030: -> 00100080 010574.707: 00000034: -> 00100080 010574.722: 00000038: -> 00100080 010574.738: 0000003c: -> 00100080 010676.778: sdram: sdram refresh 2081->4162 (2)

[naushir]

Can you provide the output of LIBCAMERA_LOG_LEVELS=*:0 rpicam-hello please?

[Baiken1412]

kid@raspberrypi:~ $ LIBCAMERA_LOG_LEVELS=*:0 rpicam-hello [0:00:56.894574501] [2601] DEBUG IPAModule ipa_module.cpp:334 ipa_rkisp1.so: IPA module /usr/local/lib/aarch64-linux-gnu/libcamera/ipa_rkisp1.so is signed [0:00:56.894708131] [2601] DEBUG IPAManager ipa_manager.cpp:235 Loaded IPA module '/usr/local/lib/aarch64-linux-gnu/libcamera/ipa_rkisp1.so' [0:00:56.895798575] [2601] DEBUG IPAModule ipa_module.cpp:334 ipa_rpi_vc4.so: IPA module /usr/local/lib/aarch64-linux-gnu/libcamera/ipa_rpi_vc4.so is signed [0:00:56.895835334] [2601] DEBUG IPAManager ipa_manager.cpp:235 Loaded IPA module '/usr/local/lib/aarch64-linux-gnu/libcamera/ipa_rpi_vc4.so' [0:00:56.895942001] [2601] DEBUG IPAModule ipa_module.cpp:334 ipa_soft_simple.so: IPA module /usr/local/lib/aarch64-linux-gnu/libcamera/ipa_soft_simple.so is signed [0:00:56.895957779] [2601] DEBUG IPAManager ipa_manager.cpp:235 Loaded IPA module '/usr/local/lib/aarch64-linux-gnu/libcamera/ipa_soft_simple.so' [0:00:56.896092057] [2601] INFO Camera camera_manager.cpp:325 libcamera v0.3.1+94-7a36d057 [0:00:56.896236631] [2603] DEBUG Camera camera_manager.cpp:73 Starting camera manager [0:00:56.896696075] [2603] DEBUG DeviceEnumerator device_enumerator.cpp:230 New media device "pispbe" created from /dev/media2 [0:00:56.896902334] [2603] DEBUG DeviceEnumerator device_enumerator.cpp:258 Added device /dev/media2: pispbe [0:00:56.897107594] [2603] DEBUG DeviceEnumerator device_enumerator.cpp:230 New media device "rp1-cfe" created from /dev/media0 [0:00:56.897270908] [2603] DEBUG DeviceEnumerator device_enumerator.cpp:258 Added device /dev/media0: rp1-cfe [0:00:56.897327834] [2603] DEBUG DeviceEnumerator device_enumerator.cpp:230 New media device "rpivid" created from /dev/media3 [0:00:56.897363871] [2603] DEBUG DeviceEnumerator device_enumerator.cpp:258 Added device /dev/media3: rpivid [0:00:56.897442334] [2603] DEBUG DeviceEnumerator device_enumerator.cpp:230 New media device "pispbe" created from /dev/media1 [0:00:56.897553334] [2603] DEBUG DeviceEnumerator device_enumerator.cpp:258 Added device /dev/media1: pispbe [0:00:56.897577131] [2603] DEBUG Camera camera_manager.cpp:138 Found registered pipeline handler 'imx8-isi' [0:00:56.897841557] [2603] DEBUG Camera camera_manager.cpp:138 Found registered pipeline handler 'mali-c55' [0:00:56.897912316] [2603] DEBUG Camera camera_manager.cpp:138 Found registered pipeline handler 'rkisp1' [0:00:56.898007612] [2603] DEBUG Camera camera_manager.cpp:138 Found registered pipeline handler 'rpi/vc4' [0:00:56.898051742] [2603] DEBUG RPI vc4.cpp:178 Unable to acquire a Unicam instance [0:00:56.898058519] [2603] DEBUG RPI vc4.cpp:178 Unable to acquire a Unicam instance [0:00:56.898067538] [2603] DEBUG Camera camera_manager.cpp:138 Found registered pipeline handler 'simple' [0:00:56.898123853] [2603] DEBUG Camera camera_manager.cpp:138 Found registered pipeline handler 'uvcvideo' Made X/EGL preview window ERROR: no cameras available

[naushir]

Your libcamera installation does not have Pi 5 support. Did you build libcamera yourself? If so, which tree/repo did you use?

[Baiken1412]

sorry I couldn't rememeber, I did build it myself

[naushir]

You will need to build libcamera from the following repo: https://github.com/raspberrypi/libcamera and following the exact instructions in the README.md file for full Pi 5 support.