search

raspberrypi / rpicam-apps

BSD 2-Clause "Simplified" License
397 stars 218 forks source link

[BUG] symbol lookup error _ZN9libcamera8controls3rpi11ScalerCropsE #723

Closed AlexEdenbach closed 2 weeks ago

AlexEdenbach commented 2 weeks ago

I got the same error as in and followed all suggestions mentioned there.

The error libcamera-hello: symbol lookup error: /lib/aarch64-linux-gnu/rpicam_app.so.1.5.1: undefined symbol: _ZN9libcamera8controls3rpi11ScalerCropsE occured since sudo apt-upgrade from today

Here is the gerenated bug report:

rpicam-apps Bug Report

Date: 26-09-2024 (14:49:43) Command: /usr/bin/camera-bug-report -c libcamera-hello

Hardware information

hostname quinto

cat /proc/cpuinfo processor : 0 BogoMIPS : 108.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x4 CPU part : 0xd0b CPU revision : 1

processor : 1 BogoMIPS : 108.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x4 CPU part : 0xd0b CPU revision : 1

processor : 2 BogoMIPS : 108.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x4 CPU part : 0xd0b CPU revision : 1

processor : 3 BogoMIPS : 108.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x4 CPU part : 0xd0b CPU revision : 1

Revision : d04170 Serial : 4761818b69016973 Model : Raspberry Pi 5 Model B Rev 1.0

Configuration

cat /boot/firmware/cmdline.txt console=serial0,115200 console=tty1 root=PARTUUID=5078f670-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE cat /boot/firmware/config.txt

For more options and information see

http://rptl.io/configtxt

Some settings may impact device functionality. See link above for details

Uncomment some or all of these to enable the optional hardware interfaces

dtparam=i2c_arm=on

dtparam=i2s=on

dtparam=spi=on

Enable audio (loads snd_bcm2835)

dtparam=audio=on

Additional overlays and parameters are documented

/boot/firmware/overlays/README

Automatically load overlays for detected cameras

camera_auto_detect=0

dtoverlay=imx477,cam0

Automatically load overlays for detected DSI displays

display_auto_detect=1

Automatically load initramfs files, if found

auto_initramfs=1

Enable DRM VC4 V3D driver

dtoverlay=vc4-kms-v3d

max_framebuffers=2

Don't have the firmware create an initial video= setting in cmdline.txt.

Use the kernel's default instead.

disable_fw_kms_setup=1

Run in 64-bit mode

arm_64bit=1

Disable compensation for displays with overscan

disable_overscan=1

Run as fast as firmware / board allows

arm_boost=1

[cm4]

Enable host mode on the 2711 built-in XHCI USB controller.

This line should be removed if the legacy DWC2 controller is required

(e.g. for USB device mode) or if USB support is not required.

otg_mode=1

[all] dtoverlay=vc4-kms-v3d dtoverlay=imx477,cam0 dtparam=rtc_bbat_vchg=3000000

Logs

dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] [ 0.000000] Linux version 6.6.47+rpt-rpi-2712 (serge@raspberrypi.com) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.47-1+rpt1 (2024-09-02) [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000002000000, size 320 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0000000002000000..0x0000000015ffffff (327680 KiB) map reusable linux,cma [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 [ 0.000000] OF: reserved mem: 0x000000003fd16600..0x000000003fd1664c (0 KiB) nomap non-reusable nvram@0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 14 pages/cpu s183976 r8192 d37208 u229376 [ 0.000000] pcpu-alloc: s183976 r8192 d37208 u229376 alloc=14*16384 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: SSBS not fully self-synchronizing [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe smsc95xx.macaddr=2C:CF:67:33:6F:0B vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=5078f670-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521728 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB) [ 0.000000] Memory: 7891344K/8380416K available (13440K kernel code, 2224K rwdata, 4304K rodata, 5056K init, 1213K bss, 161392K reserved, 327680K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 43247 entries in 43 pages [ 0.000000] ftrace: allocated 43 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000165] Console: colour dummy device 80x25 [ 0.000169] printk: console [tty1] enabled [ 0.000203] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000208] pid_max: default: 32768 minimum: 301 [ 0.000228] LSM: initializing lsm=capability,integrity [ 0.000289] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) [ 0.000313] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) [ 0.000649] cgroup: Disabling memory control group subsystem [ 0.001068] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.001094] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.001115] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.001176] rcu: Hierarchical SRCU implementation. [ 0.001177] rcu: Max phase no-delay instances is 1000. [ 0.001819] EFI services will not be available. [ 0.001894] smp: Bringing up secondary CPUs ... [ 0.002052] Detected PIPT I-cache on CPU1 [ 0.002094] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] [ 0.002279] Detected PIPT I-cache on CPU2 [ 0.002311] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] [ 0.002478] Detected PIPT I-cache on CPU3 [ 0.002507] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] [ 0.002533] smp: Brought up 1 node, 4 CPUs [ 0.002537] SMP: Total of 4 processors activated. [ 0.002540] CPU features: detected: 32-bit EL0 Support [ 0.002542] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.002544] CPU features: detected: Common not Private translations [ 0.002546] CPU features: detected: CRC32 instructions [ 0.002548] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.002550] CPU features: detected: LSE atomic instructions [ 0.002552] CPU features: detected: Privileged Access Never [ 0.002554] CPU features: detected: RAS Extension Support [ 0.002556] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.002589] CPU: All CPU(s) started at EL2 [ 0.002590] alternatives: applying system-wide alternatives [ 0.004266] devtmpfs: initialized [ 0.007297] Enabled cp15_barrier support [ 0.007303] Enabled setend support [ 0.007359] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.007366] futex hash table entries: 1024 (order: 2, 65536 bytes, linear) [ 0.008244] pinctrl core: initialized pinctrl subsystem [ 0.008408] DMI not present or invalid. [ 0.008593] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.009180] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.009225] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.009273] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.009290] audit: initializing netlink subsys (disabled) [ 0.009342] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 [ 0.009467] thermal_sys: Registered thermal governor 'step_wise' [ 0.009479] cpuidle: using governor menu [ 0.009538] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.009568] ASID allocator initialised with 32768 entries [ 0.009903] Serial: AMBA PL011 UART driver [ 0.010900] bcm2835-mbox 107c013880.mailbox: mailbox enabled [ 0.011238] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 [ 0.011248] printk: console [ttyAMA10] enabled [ 0.019994] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-09-23T13:02:56, variant start_cd [ 0.023991] raspberrypi-firmware soc:firmware: Firmware hash is 2682625900000000000000000000000000000000 [ 0.030511] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL [ 0.030514] Modules: 0 pages in range for non-PLT usage [ 0.030515] Modules: 129408 pages in range for PLT usage [ 0.034709] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 [ 0.035081] iommu: Default domain type: Translated [ 0.035083] iommu: DMA domain TLB invalidation policy: strict mode [ 0.035176] SCSI subsystem initialized [ 0.035212] usbcore: registered new interface driver usbfs [ 0.035225] usbcore: registered new interface driver hub [ 0.035234] usbcore: registered new device driver usb [ 0.035317] pps_core: LinuxPPS API ver. 1 registered [ 0.035319] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.035323] PTP clock support registered [ 0.035604] vgaarb: loaded [ 0.035695] clocksource: Switched to clocksource arch_sys_counter [ 0.035804] VFS: Disk quotas dquot_6.6.0 [ 0.035815] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) [ 0.035841] FS-Cache: Loaded [ 0.038343] CacheFiles: Loaded [ 0.039806] NET: Registered PF_INET protocol family [ 0.039949] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear) [ 0.042337] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear) [ 0.042380] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear) [ 0.042384] TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear) [ 0.042654] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear) [ 0.044262] TCP: Hash tables configured (established 65536 bind 65536) [ 0.044398] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear) [ 0.044513] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear) [ 0.044613] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear) [ 0.044764] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.044909] RPC: Registered named UNIX socket transport module. [ 0.044911] RPC: Registered udp transport module. [ 0.044912] RPC: Registered tcp transport module. [ 0.044914] RPC: Registered tcp-with-tls transport module. [ 0.044915] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.044920] PCI: CLS 0 bytes, default 64 [ 0.045012] Trying to unpack rootfs image as initramfs... [ 0.051817] kvm [1]: IPA Size Limit: 40 bits [ 0.051840] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance) [ 0.051870] kvm [1]: vgic interrupt IRQ9 [ 0.051886] kvm [1]: VHE mode initialized successfully [ 0.299109] Freeing initrd memory: 17376K [ 0.325170] Initialise system trusted keyrings [ 0.325266] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.325286] zbud: loaded [ 0.325474] NFS: Registering the id_resolver key type [ 0.325482] Key type id_resolver registered [ 0.325484] Key type id_legacy registered [ 0.325490] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.325493] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.325552] F2FS not supported on PAGE_SIZE(16384) != 4096 [ 0.325603] Key type asymmetric registered [ 0.325605] Asymmetric key parser 'x509' registered [ 0.325625] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.325665] io scheduler mq-deadline registered [ 0.325667] io scheduler kyber registered [ 0.325678] io scheduler bfq registered [ 0.325953] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 26) [ 0.326021] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 27) [ 0.326067] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 28) [ 0.326114] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 29) [ 0.326162] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 30) [ 0.326206] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 31) [ 0.327486] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes [ 0.327491] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840 [ 0.327619] Console: switching to colour frame buffer device 240x67 [ 0.329135] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered! [ 0.363381] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.363802] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART [ 0.363858] serial serial0: tty port ttyS0 registered [ 0.364195] iproc-rng200 107d208000.rng: hwrng registered [ 0.364253] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) [ 0.364477] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe [ 0.366380] brd: module loaded [ 0.367793] loop: module loaded [ 0.367911] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 0.368032] Loading iSCSI transport class v2.0-870. [ 0.368939] usbcore: registered new device driver r8152-cfgselector [ 0.368947] usbcore: registered new interface driver r8152 [ 0.368954] usbcore: registered new interface driver lan78xx [ 0.368961] usbcore: registered new interface driver smsc95xx [ 0.369021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.369042] dwc_otg: FIQ enabled [ 0.369044] dwc_otg: NAK holdoff enabled [ 0.369046] dwc_otg: FIQ split-transaction FSM enabled [ 0.369048] Module dwc_common_port init [ 0.369178] usbcore: registered new interface driver uas [ 0.369190] usbcore: registered new interface driver usb-storage [ 0.369296] mousedev: PS/2 mouse device common for all mice [ 0.371913] rpi-rtc soc:rpi_rtc: trickle charging enabled at 3000000uV [ 0.377670] rpi-rtc soc:rpi_rtc: registered as rtc0 [ 0.379191] rpi-rtc soc:rpi_rtc: setting system clock to 2024-09-26T12:44:08 UTC (1727354648) [ 0.379530] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! [ 0.379533] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.381941] sdhci: Secure Digital Host Controller Interface driver [ 0.381943] sdhci: Copyright(c) Pierre Ossman [ 0.381986] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.382178] ledtrig-cpu: registered to indicate activity on CPUs [ 0.382227] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.382239] hid: raw HID events driver (C) Jiri Kosina [ 0.382257] usbcore: registered new interface driver usbhid [ 0.382258] usbhid: USB HID core driver [ 0.382594] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available [ 0.382958] NET: Registered PF_PACKET protocol family [ 0.382992] Key type dns_resolver registered [ 0.388558] registered taskstats version 1 [ 0.388627] Loading compiled-in X.509 certificates [ 0.391085] Key type .fscrypt registered [ 0.391088] Key type fscrypt-provisioning registered [ 0.391812] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: [ 0.391819] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] [ 0.391830] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 [ 0.391836] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 [ 0.391844] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 [ 0.391849] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 [ 0.393177] brcm-pcie 1000120000.pcie: Forcing gen 2 [ 0.393393] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 [ 0.393396] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.393400] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) [ 0.393404] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) [ 0.393417] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 [ 0.393445] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.394389] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.499704] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) [ 0.499728] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 [ 0.499743] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] [ 0.499751] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] [ 0.499759] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] [ 0.499831] pci 0000:01:00.0: supports D1 [ 0.499833] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.511706] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.511717] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] [ 0.511721] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] [ 0.511726] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] [ 0.511731] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] [ 0.511737] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.511740] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] [ 0.511745] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 0.511754] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 0.511828] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 0.511865] pcieport 0000:00:00.0: PME: Signaling with IRQ 38 [ 0.511936] pcieport 0000:00:00.0: AER: enabled with IRQ 38 [ 0.512020] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 [ 0.512024] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 [ 0.512034] rp1 0000:01:00.0: enabling device (0000 -> 0002) [ 0.512891] rp1 0000:01:00.0: chip_id 0x20001927 [ 0.517874] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 100 [ 0.536590] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 106 (2c:cf:67:33:6f:0b) [ 0.536683] platform 1f00110000.csi: Fixed dependency cycle(s) with /axi/pcie@120000/rp1/i2c@88000/imx477@1a [ 0.537248] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels [ 0.537507] xhci-hcd xhci-hcd.0: xHCI Host Controller [ 0.537514] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 [ 0.537958] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 [ 0.537970] xhci-hcd xhci-hcd.0: irq 131, io mem 0x1f00200000 [ 0.538037] xhci-hcd xhci-hcd.0: xHCI Host Controller [ 0.538041] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 [ 0.538044] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed [ 0.538087] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 0.538091] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.538094] usb usb1: Product: xHCI Host Controller [ 0.538096] usb usb1: Manufacturer: Linux 6.6.47+rpt-rpi-2712 xhci-hcd [ 0.538098] usb usb1: SerialNumber: xhci-hcd.0 [ 0.538235] hub 1-0:1.0: USB hub found [ 0.538249] hub 1-0:1.0: 2 ports detected [ 0.538377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 0.538380] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.538383] usb usb2: Product: xHCI Host Controller [ 0.538385] usb usb2: Manufacturer: Linux 6.6.47+rpt-rpi-2712 xhci-hcd [ 0.538388] usb usb2: SerialNumber: xhci-hcd.0 [ 0.538475] hub 2-0:1.0: USB hub found [ 0.538485] hub 2-0:1.0: 1 port detected [ 0.538767] xhci-hcd xhci-hcd.1: xHCI Host Controller [ 0.538772] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 [ 0.539215] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 [ 0.539226] xhci-hcd xhci-hcd.1: irq 136, io mem 0x1f00300000 [ 0.539291] xhci-hcd xhci-hcd.1: xHCI Host Controller [ 0.539294] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 [ 0.539299] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed [ 0.539345] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 0.539348] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.539351] usb usb3: Product: xHCI Host Controller [ 0.539353] usb usb3: Manufacturer: Linux 6.6.47+rpt-rpi-2712 xhci-hcd [ 0.539356] usb usb3: SerialNumber: xhci-hcd.1 [ 0.539446] hub 3-0:1.0: USB hub found [ 0.539458] hub 3-0:1.0: 2 ports detected [ 0.539583] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 0.539586] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.539589] usb usb4: Product: xHCI Host Controller [ 0.539591] usb usb4: Manufacturer: Linux 6.6.47+rpt-rpi-2712 xhci-hcd [ 0.539593] usb usb4: SerialNumber: xhci-hcd.1 [ 0.539678] hub 4-0:1.0: USB hub found [ 0.539688] hub 4-0:1.0: 1 port detected [ 0.540366] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.540680] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu [ 0.540685] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu [ 0.540691] platform 1000800000.codec: Adding to iommu group 0 [ 0.540702] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu [ 0.540706] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu [ 0.540710] platform 1000880000.pisp_be: Adding to iommu group 0 [ 0.540748] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu [ 0.540751] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu [ 0.540755] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success [ 0.541118] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.541408] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu [ 0.541412] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu [ 0.541416] platform axi:gpu: Adding to iommu group 1 [ 0.541443] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu [ 0.541447] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success [ 0.541758] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.542059] platform 1f00110000.csi: bcm2712_iommu_probe_device: MMU 1000005280.iommu [ 0.542064] platform 1f00110000.csi: bcm2712_iommu_device_group: MMU 1000005280.iommu [ 0.542068] platform 1f00110000.csi: Adding to iommu group 2 [ 0.542073] platform 1f00110000.csi: bcm2712_iommu_attach_dev: MMU 1000005280.iommu [ 0.542077] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success [ 0.542852] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO [ 0.542969] mmc0: CQHCI version 5.10 [ 0.543408] mmc1: CQHCI version 5.10 [ 0.543730] of_cfs_init [ 0.543773] of_cfs_init: OK [ 0.543850] clk: Disabling unused clocks [ 0.579143] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit [ 0.672593] mmc0: new ultra high speed SDR104 SDHC card at address 59b4 [ 0.672883] mmcblk0: mmc0:59b4 SN32G 29.7 GiB [ 0.681001] mmcblk0: p1 p2 [ 0.681103] mmcblk0: mmc0:59b4 SN32G 29.7 GiB (quirks 0x00004000) [ 0.730247] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit [ 0.733256] Freeing unused kernel memory: 5056K [ 0.733301] Run /init as init process [ 0.733302] with arguments: [ 0.733304] /init [ 0.733305] splash [ 0.733307] with environment: [ 0.733308] HOME=/ [ 0.733310] TERM=linux [ 0.761614] mmc1: new ultra high speed DDR50 SDIO card at address 0001 [ 0.791730] usb 3-2: new full-speed USB device number 2 using xhci-hcd [ 0.869098] input: pwr_button as /devices/platform/pwr_button/input/input0 [ 0.882219] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode [ 0.882478] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode [ 0.888805] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0 [ 0.928978] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu [ 0.929523] Console: switching to colour dummy device 80x25 [ 0.931892] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4]) [ 0.933285] Registered IR keymap rc-cec [ 0.933334] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0 [ 0.933392] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input1 [ 0.934211] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/107c701400.hdmi/sound/card0/input2 [ 0.934297] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4]) [ 0.935770] Registered IR keymap rc-cec [ 0.935821] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1 [ 0.935873] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input3 [ 0.936460] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/107c706400.hdmi/sound/card1/input4 [ 0.936543] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4]) [ 0.936692] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4]) [ 0.936776] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4]) [ 0.936853] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 0.937612] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 0.978365] usb 3-2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 0.978375] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 0.978378] usb 3-2: Product: USB Receiver [ 0.978381] usb 3-2: Manufacturer: Logitech [ 0.983922] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1 [ 1.022662] input: Logitech USB Receiver as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:046D:C534.0001/input/input5 [ 1.036666] Console: switching to colour frame buffer device 240x75 [ 1.055117] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device [ 1.159784] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.1-2/input0 [ 1.195400] input: Logitech USB Receiver Mouse as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:046D:C534.0002/input/input6 [ 1.195522] input: Logitech USB Receiver Consumer Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:046D:C534.0002/input/input7 [ 1.251756] input: Logitech USB Receiver System Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:046D:C534.0002/input/input8 [ 1.251850] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.1-2/input1 [ 1.379945] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.1-2/input0 [ 1.535989] logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.1-2/input1 [ 1.611418] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1 [ 1.612001] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input11 [ 1.627422] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 1.723923] hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-xhci-hcd.1-2/input1:1 [ 1.771600] input: Logitech Wireless Mouse as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input16 [ 1.887925] logitech-hidpp-device 0003:046D:4054.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-xhci-hcd.1-2/input1:2 [ 1.931600] input: Logitech Wireless Keyboard PID:4023 as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input17 [ 1.991788] logitech-hidpp-device 0003:046D:4023.0003: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-xhci-hcd.1-2/input1:1 [ 2.147499] EXT4-fs (mmcblk0p2): mounted filesystem fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 ro with ordered data mode. Quota mode: none. [ 2.490951] NET: Registered PF_INET6 protocol family [ 2.491328] Segment Routing with IPv6 [ 2.491336] In-situ OAM (IOAM) with IPv6 [ 2.517151] systemd[1]: systemd 252.30-1~deb12u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 2.517168] systemd[1]: Detected architecture arm64. [ 2.522775] systemd[1]: Hostname set to . [ 2.598261] uart-pl011 107d001000.serial: no DMA platform data [ 2.829233] systemd[1]: Queued start job for default target graphical.target. [ 2.844440] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 2.844795] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 2.845065] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 2.845327] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 2.845476] systemd[1]: Created slice user.slice - User and Session Slice. [ 2.845558] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 2.845762] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 2.845793] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-5078f670\x2d01.device - /dev/disk/by-partuuid/5078f670-01... [ 2.845807] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10... [ 2.845843] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 2.845885] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 2.845922] systemd[1]: Reached target slices.target - Slice Units. [ 2.845950] systemd[1]: Reached target swap.target - Swaps. [ 2.845979] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 2.846137] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 2.846207] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 2.846518] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 2.846664] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 2.846802] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 2.846954] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 2.847050] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 2.847211] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 2.848096] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 2.849160] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 2.850195] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 2.850388] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ 2.852617] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 2.854551] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 2.856105] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 2.857699] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 2.859316] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 2.861105] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 2.862801] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 2.864326] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 2.866454] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 2.866683] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 2.869395] systemd[1]: Starting systemd-journald.service - Journal Service... [ 2.880098] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 2.881764] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 2.883938] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 2.886041] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.886246] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 2.886618] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 2.886855] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 2.887857] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 2.888430] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 2.888572] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 2.888886] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 2.889003] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 2.889136] fuse: init (API version 7.39) [ 2.889276] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 2.889393] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 2.889698] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 2.889803] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 2.890034] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 2.890136] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 2.890363] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 2.890466] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 2.893490] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 2.895055] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 2.895263] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 2.904209] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 2.904541] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 2.929449] i2c_dev: i2c /dev entries driver [ 2.930452] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 2.931952] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 2.932592] EXT4-fs (mmcblk0p2): re-mounted fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 r/w. Quota mode: none. [ 2.936144] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 2.936494] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 2.936548] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 2.937688] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... [ 2.939045] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ 2.960115] systemd[1]: Started systemd-journald.service - Journal Service. [ 2.987071] systemd-journald[300]: Received client request to flush runtime journal. [ 3.855993] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 [ 3.856190] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 [ 3.856264] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 [ 3.856326] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 [ 3.856363] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 [ 3.856405] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 [ 3.856444] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 [ 3.856497] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 [ 3.856629] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 [ 3.856688] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 [ 3.911900] mc: Linux media interface: v0.10 [ 3.981045] videodev: Linux video capture interface: v2.00 [ 4.053840] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu [ 4.059128] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [ 4.059949] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu [ 4.063173] rp1-cfe 1f00110000.csi: bcm2712_iommu_of_xlate: MMU 1000005280.iommu [ 4.063566] rp1-cfe 1f00110000.csi: DW dphy Host HW v1.20 [ 4.063581] rp1-cfe 1f00110000.csi: PiSP FE HW v0.1 [ 4.068487] rp1-cfe 1f00110000.csi: found subdevice /axi/pcie@120000/rp1/i2c@88000/imx477@1a [ 4.075986] pispbe 1000880000.pisp_be: Runtime PM usage count underflow! [ 4.163746] rpivid 1000800000.codec: Device registered as /dev/video19 [ 4.184521] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.224301] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 4.224625] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 4.224932] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.225235] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 4.259113] Bluetooth: Core ver 2.22 [ 4.259144] NET: Registered PF_BLUETOOTH protocol family [ 4.259146] Bluetooth: HCI device and connection manager initialized [ 4.259154] Bluetooth: HCI socket layer initialized [ 4.259157] Bluetooth: L2CAP socket layer initialized [ 4.259163] Bluetooth: SCO socket layer initialized [ 4.305966] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 4.315336] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.329468] usbcore: registered new interface driver brcmfmac [ 4.335910] Bluetooth: HCI UART driver ver 2.3 [ 4.335917] Bluetooth: HCI UART protocol H4 registered [ 4.335954] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 4.336107] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 4.336235] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 4.336273] Bluetooth: HCI UART protocol Broadcom registered [ 4.341787] alsactl[431]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 4.341787] alsactl[430]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 4.532095] imx477 6-001a: Device found is imx477 [ 4.532165] rp1-cfe 1f00110000.csi: Using sensor imx477 6-001a for capture [ 4.532282] rp1-cfe 1f00110000.csi: Registered [rp1-cfe-csi2_ch0] node id 0 successfully as /dev/video0 [ 4.532449] rp1-cfe 1f00110000.csi: Registered [rp1-cfe-embedded] node id 1 successfully as /dev/video1 [ 4.532506] rp1-cfe 1f00110000.csi: Registered [rp1-cfe-csi2_ch2] node id 2 successfully as /dev/video2 [ 4.532543] rp1-cfe 1f00110000.csi: Registered [rp1-cfe-csi2_ch3] node id 3 successfully as /dev/video3 [ 4.532586] rp1-cfe 1f00110000.csi: Registered [rp1-cfe-fe_image0] node id 4 successfully as /dev/video4 [ 4.533172] rp1-cfe 1f00110000.csi: Registered [rp1-cfe-fe_image1] node id 5 successfully as /dev/video5 [ 4.533278] rp1-cfe 1f00110000.csi: Registered [rp1-cfe-fe_stats] node id 6 successfully as /dev/video6 [ 4.533328] rp1-cfe 1f00110000.csi: Registered [rp1-cfe-fe_config] node id 7 successfully as /dev/video7 [ 4.585002] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) [ 4.585568] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b [ 4.697268] Bluetooth: hci0: BCM: chip id 107 [ 4.697487] Bluetooth: hci0: BCM: features 0x2f [ 4.700745] Bluetooth: hci0: BCM4345C0 [ 4.700760] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 [ 4.705669] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch [ 4.938615] Adding 204784k swap on /var/swap. Priority:-2 extents:10 across:7749632k SS [ 5.036274] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.036292] Bluetooth: BNEP filters: protocol multicast [ 5.036300] Bluetooth: BNEP socket layer initialized [ 5.432359] Bluetooth: hci0: BCM: features 0x2f [ 5.433732] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190 [ 5.433739] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382 [ 5.434065] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) [ 5.453187] Bluetooth: MGMT ver 1.22 [ 5.461521] NET: Registered PF_ALG protocol family [ 5.775580] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) [ 5.775593] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode [ 5.780772] pps pps0: new PPS source ptp0 [ 5.780887] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. [ 5.794395] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 9.594816] Bluetooth: RFCOMM TTY layer initialized [ 9.594831] Bluetooth: RFCOMM socket layer initialized [ 9.594839] Bluetooth: RFCOMM ver 1.11 [ 12.700116] logitech-hidpp-device 0003:046D:4054.0004: HID++ 4.5 device connected. [ 57.886820] logitech-hidpp-device 0003:046D:4023.0003: HID++ 2.0 device connected.

sudo vclog log --msg 005127.959: Initial voltage 800000 temp 47172 005325.372: avs_2712: AVS pred 8526 852600 temp 47722 005325.383: vpred 852 mV +0 005329.826: FB framebuffer_swap 1 005347.353: Select resolution HDMI0/2 hotplug 1 max_mode 2 005359.741: HDMI0 edid block 0 offset 0 005359.750: 00ffffffffffff0010ac7aa053544731 005359.762: 1d1b010380342078eaee95a3544c9926 005359.772: 0f5054a1080081408180a940b300d1c0 005359.783: 010101010101283c80a070b023403020 005359.794: 360006442100001a000000ff00595050 005359.804: 593037374c314754530a000000fc0044 005359.815: 454c4c2055323431324d0a20000000fd 005359.826: 00323d1e5311000a20202020202000c9 005359.854: HDMI0: best-mode 2 (limit 2) 1920x1080 60 Hz CEA modes 00000100000000000000000000000000 extensions 0 005359.870: Select resolution HDMI1/2 hotplug 0 max_mode 2 005359.913: FB0 disp 0 max-fb 2 1920x1080 stride 3840 base 0x3f800000 006208.207: dtb_file 'bcm2712-rpi-5-b.dtb' 006293.499: dtparam: audio=on 006297.939: Unknown dtparam 'audio' - ignored 006368.574: Loaded overlay 'imx477' 006368.584: dtparam: cam0=true 006535.705: Loaded overlay 'vc4-kms-v3d-pi5' 006700.405: Loaded overlay 'imx477' 006700.417: dtparam: cam0=true 006702.542: dtparam: rtc_bbat_vchg=3000000 009892.090: Starting OS 9892 ms 009894.728: 00000040: -> 00000480 009894.744: 00000030: -> 00100080 009894.759: 00000034: -> 00100080 009894.776: 00000038: -> 00100080 009894.790: 0000003c: -> 00100080 009996.837: sdram: sdram refresh 2081->4162 (2)

sudo vclog log --assert

Memory

cat /proc/meminfo MemTotal: 8241456 kB MemFree: 5518752 kB MemAvailable: 6764528 kB Buffers: 55424 kB Cached: 1485744 kB SwapCached: 0 kB Active: 1850400 kB Inactive: 481104 kB Active(anon): 1030064 kB Inactive(anon): 0 kB Active(file): 820336 kB Inactive(file): 481104 kB Unevictable: 201872 kB Mlocked: 0 kB SwapTotal: 204784 kB SwapFree: 204784 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 1264 kB Writeback: 0 kB AnonPages: 992320 kB Mapped: 328448 kB Shmem: 239040 kB KReclaimable: 36864 kB Slab: 80720 kB SReclaimable: 36864 kB SUnreclaim: 43856 kB KernelStack: 9184 kB PageTables: 19280 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 4325504 kB Committed_AS: 3206736 kB VmallocTotal: 68180246528 kB VmallocUsed: 24096 kB VmallocChunk: 0 kB Percpu: 1472 kB CmaTotal: 327680 kB CmaFree: 311200 kB

sudo cat /sys/kernel/debug/dma_buf/bufinfo

Dma-buf Objects: size flags mode count exp_name ino name 08732672 00000000 00080005 00000009 drm 00000009 write fence:drm_sched v3d_render seq 26251 signalled write fence:drm_sched v3d_tfu seq 3017 signalled Attached Devices: 1002000000.v3d 1002000000.v3d Total 2 devices attached

08732672 00000000 00080005 00000009 drm 00000007 write fence:drm_sched v3d_render seq 26621 signalled write fence:drm_sched v3d_tfu seq 3115 signalled Attached Devices: 1002000000.v3d 1002000000.v3d Total 2 devices attached

09224192 00000000 00080005 00000005 drm 00000001 write fence:drm_sched v3d_render seq 16705 signalled write fence:drm_sched v3d_render seq 16674 signalled Attached Devices: 1002000000.v3d Total 1 devices attached

Total 3 objects, 26689536 bytes

sudo cat /sys/kernel/debug/vcsm-cma/state cat: /sys/kernel/debug/vcsm-cma/state: No such file or directory

Media Devices

media-ctl -d 0 -p Media controller API version 6.6.47

Media device information

driver rp1-cfe model rp1-cfe serial
bus info platform:1f00110000.csi hw revision 0x114666 driver version 6.6.47

Device topology

media-ctl -d 1 -p Media controller API version 6.6.47

Media device information

driver pispbe model pispbe serial
bus info platform:1000880000.pisp_be hw revision 0x2252700 driver version 6.6.47

Device topology

media-ctl -d 2 -p Media controller API version 6.6.47

Media device information

driver pispbe model pispbe serial
bus info platform:1000880000.pisp_be hw revision 0x2252700 driver version 6.6.47

Device topology

media-ctl -d 3 -p Media controller API version 6.6.47

Media device information

driver rpivid model rpivid serial
bus info platform:rpivid hw revision 0x0 driver version 6.6.47

Device topology

media-ctl -d 4 -p Failed to enumerate /dev/media4 (-2)

Cameras

rpicam-hello --list-cameras rpicam-hello: symbol lookup error: /lib/aarch64-linux-gnu/rpicam_app.so.1.5.1: undefined symbol: _ZN9libcamera8controls3rpi11ScalerCropsE

Versions

uname -a Linux quinto 6.6.47+rpt-rpi-2712 #1 SMP PREEMPT Debian 1:6.6.47-1+rpt1 (2024-09-02) aarch64 GNU/Linux

cat /etc/os-release PRETTY_NAME="Debian GNU/Linux 12 (bookworm)" NAME="Debian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/"

vcgencmd version 2024/09/23 14:02:56 Copyright (c) 2012 Broadcom version 26826259 (release) (embedded)

rpicam-hello --version rpicam-hello: symbol lookup error: /lib/aarch64-linux-gnu/rpicam_app.so.1.5.1: undefined symbol: _ZN9libcamera8controls3rpi11ScalerCropsE

libcamera-hello

libcamera-hello: symbol lookup error: /lib/aarch64-linux-gnu/rpicam_app.so.1.5.1: undefined symbol: _ZN9libcamera8controls3rpi11ScalerCropsE

AlexEdenbach commented 2 weeks ago

BTW the output of ldd /usr/lib/aarch64-linux-gnu/libcamera.so.0.3.1 is

linux-vdso.so.1 (0x00007fff4bf98000)
libcamera-base.so.0.3 => /usr/local/lib/aarch64-linux-gnu/libcamera-base.so.0.3 (0x00007fff4bcf0000)
libpisp.so.1 => /lib/aarch64-linux-gnu/libpisp.so.1 (0x00007fff4bc20000)
libgnutls.so.30 => /lib/aarch64-linux-gnu/libgnutls.so.30 (0x00007fff4b9d0000)
liblttng-ust.so.1 => /lib/aarch64-linux-gnu/liblttng-ust.so.1 (0x00007fff4b920000)
libudev.so.1 => /lib/aarch64-linux-gnu/libudev.so.1 (0x00007fff4b8d0000)
libyaml-0.so.2 => /lib/aarch64-linux-gnu/libyaml-0.so.2 (0x00007fff4b890000)
libstdc++.so.6 => /lib/aarch64-linux-gnu/libstdc++.so.6 (0x00007fff4b670000)
libm.so.6 => /lib/aarch64-linux-gnu/libm.so.6 (0x00007fff4b5d0000)
libgcc_s.so.1 => /lib/aarch64-linux-gnu/libgcc_s.so.1 (0x00007fff4b590000)
libc.so.6 => /lib/aarch64-linux-gnu/libc.so.6 (0x00007fff4b3d0000)
/lib/ld-linux-aarch64.so.1 (0x00007fff4bf60000)
libdw.so.1 => /lib/aarch64-linux-gnu/libdw.so.1 (0x00007fff4b310000)
libunwind.so.8 => /lib/aarch64-linux-gnu/libunwind.so.8 (0x00007fff4b2c0000)
libboost_log.so.1.74.0 => /lib/aarch64-linux-gnu/libboost_log.so.1.74.0 (0x00007fff4b1d0000)
libboost_thread.so.1.74.0 => /lib/aarch64-linux-gnu/libboost_thread.so.1.74.0 (0x00007fff4b190000)
libp11-kit.so.0 => /lib/aarch64-linux-gnu/libp11-kit.so.0 (0x00007fff4b040000)
libidn2.so.0 => /lib/aarch64-linux-gnu/libidn2.so.0 (0x00007fff4aff0000)
libunistring.so.2 => /lib/aarch64-linux-gnu/libunistring.so.2 (0x00007fff4ae20000)
libtasn1.so.6 => /lib/aarch64-linux-gnu/libtasn1.so.6 (0x00007fff4ade0000)
libnettle.so.8 => /lib/aarch64-linux-gnu/libnettle.so.8 (0x00007fff4ad70000)
libhogweed.so.6 => /lib/aarch64-linux-gnu/libhogweed.so.6 (0x00007fff4ad00000)
libgmp.so.10 => /lib/aarch64-linux-gnu/libgmp.so.10 (0x00007fff4ac60000)
libnuma.so.1 => /lib/aarch64-linux-gnu/libnuma.so.1 (0x00007fff4ac30000)
liblttng-ust-common.so.1 => /lib/aarch64-linux-gnu/liblttng-ust-common.so.1 (0x00007fff4ac00000)
liblttng-ust-tracepoint.so.1 => /lib/aarch64-linux-gnu/liblttng-ust-tracepoint.so.1 (0x00007fff4abc0000)
libelf.so.1 => /lib/aarch64-linux-gnu/libelf.so.1 (0x00007fff4ab80000)
libz.so.1 => /lib/aarch64-linux-gnu/libz.so.1 (0x00007fff4ab40000)
liblzma.so.5 => /lib/aarch64-linux-gnu/liblzma.so.5 (0x00007fff4aaf0000)
libbz2.so.1.0 => /lib/aarch64-linux-gnu/libbz2.so.1.0 (0x00007fff4aac0000)
libboost_filesystem.so.1.74.0 => /lib/aarch64-linux-gnu/libboost_filesystem.so.1.74.0 (0x00007fff4aa80000)
libffi.so.8 => /lib/aarch64-linux-gnu/libffi.so.8 (0x00007fff4aa50000)
AlexEdenbach commented 2 weeks ago

works again after removing all libcamera-related files in /usr/local/lib/aarch64-linux-gnu/ (but not the folder libcamera)