After power outages for my jackshaft 1.0+ door openers, my doors enter an uncontrollable state where they open randomly until the ratgdo is restarted. I have tested this with MQTT and ESPHOME firmware, currently on ESPHOME. I believe the ratgdo is booting faster than the 889LM panel, causing it to fall into emulation mode. The panel then comes online, and falls into a loop of flashing yellow and red lights, and randomly opening the doors. Is there an option to disable emulation mode, or set a longer timeout before it is enabled?
+1 on this. Had a power outage this morning and discovered my garage door opening and closing by itself. For those of us with 889LM wall panels we never need the emulation feature.
After power outages for my jackshaft 1.0+ door openers, my doors enter an uncontrollable state where they open randomly until the ratgdo is restarted. I have tested this with MQTT and ESPHOME firmware, currently on ESPHOME. I believe the ratgdo is booting faster than the 889LM panel, causing it to fall into emulation mode. The panel then comes online, and falls into a loop of flashing yellow and red lights, and randomly opening the doors. Is there an option to disable emulation mode, or set a longer timeout before it is enabled?