Closed samannazz closed 1 year ago
Hi @samannazz,
Please WKS_FILE = "sdimage-dual-raspberrypi.wks.in"
as noted in the README.rst of the master branch: https://github.com/rauc/meta-rauc-community/tree/master/meta-rauc-raspberrypi#ii-build-the-demo-system
At some point sdimage-dual-raspberrypi.wks
was renamed to sdimage-dual-raspberrypi.wks.in
and README.rst has been updated accordingly.
Best regards, Leon
Alright, @leon-anavi, I think this blog is written by you:
https://www.konsulko.com/getting-started-with-rauc-on-raspberry-pi-2#:~:text=RAUC%20is%20a%20powerful%20and,in%20the%20Linux%20kernel%20configurations.
Here, WKS_FILE = "sdimage-dual-raspberrypi.wks" is written.
Yes, good point, we need to correct it there. Thank you for reporting it.
Best regards, Leon
@leon-anavi, I had build the image successfully and burn that image on sd-card by this command.
bzcat /path/to/core-image-minimal-raspberrypi3.wic.bz2 | dd of=/dev/sdb
then connected the Raspberry Pi to an external desktop screen, Ethernet, and power cable, but the system did not boot up.
Hi @samannazz,
@leon-anavi, I had build the image successfully and burn that image on sd-card by this command.
bzcat /path/to/core-image-minimal-raspberrypi3.wic.bz2 | dd of=/dev/sdb
then connected the Raspberry Pi to an external desktop screen, Ethernet, and power cable, but the system did not boot up.
You have replaced /path/to/
with the actual path to the image, right?
Please have a look at the serial output to see what the problem is and share the log here.
Best regards, Leon
Hi @leon-anavi,
Actually, I built the meta-rauc for rpi in a virtual machine (accessing the vm via vcn viewer). After building it, I copied the image core-image-minimal-raspberrypi3.wic.bz2
to my local host machine, burned it onto an sd card, and put that sd card into the rpi3. I also attached the serial cable and Ethernet. However, when I powered it on and ran "lsusb" on the terminal, it did not show my rpi.
I tested the rpi with another sd card that had ubuntu os burned onto it and it worked fine with the rpi.
So, it seems like there may be a problem with the core-image-minimal-raspberrypi3.wic.bz2 image
.
Hi @samannazz,
Sorry, we can't debug it without any boot logs. If you provide any logs from the serial output I will be able to give you guidelines for debugging this.
Best regards, Leon
Hi @leon-anavi,
I tried to connect the ttl to the rpi uart using a serial connection, but for some reason I was unable to connect it.
On the other hand, I have a question. In local.conf, I specified
MACHINE = "raspberrypi3"
but after building, the image name shows that it was built for the rpi4.
I am trying to do meta-rauc with Raspberry Pi 3, and I have followed the steps as mentioned. However, after baking the core-image-minimal, this error occurred.
what's the issue?
local.conf