search

rbei-etas / busmaster

BUSMASTER is an Open Source Software tool to simulate, analyze and test data bus systems such as CAN. BUSMASTER was conceptualized, designed and implemented by Robert Bosch Engineering and Business Solutions (RBEI). Presently it is a joint project of RBEI and ETAS GmbH.
http://rbei-etas.github.com/busmaster/
GNU General Public License v3.0
945 stars 500 forks source link

busmaster don't support kvaser lin 2.0 #1112

Open gpulsex opened 7 years ago

gpulsex commented 7 years ago

I choose kvaser lin connect to busmaster。but all frames checksum is classic。 I think busmaster don‘t supports LIN enhanced checksun。 I hope you can Adopt the question，and Give a new version as soon as possible。 Important things are to be repeated for 3 times： busmasterdon‘t supports kvaser LIN enhanced checksun！ busmasterdon‘t supports kvaser LIN enhanced checksun！ busmasterdon‘t supports kvaser LIN enhanced checksun！

ARL2OFO commented 7 years ago

Hi at all, Hi gpulsex, I can confirm I have the same issue; With the cable Kvaser LIN is not possible to send message as a master device over the LIN bus, with the enhanced checksum: I tried both using an LDF > 2.0 or overwriting the LDF setting by a manual setting.

Stefanuccio commented 6 years ago

Hello ,

I've encountered the same problem . Are there any update about this topic?

Thank you

ARL2OFO commented 6 years ago

Hello,

No, I have not any news about.

I hope, the issue will be solved by the software group.

Cordiali Saluti / Best regards,

Luca Arena

Tel. +39 0373 249 735

Da: Stefano [mailto:notifications@github.com] Inviato: giovedì 24 maggio 2018 12:20 A: rbei-etas/busmaster busmaster@noreply.github.com Cc: Arena Luca (VHIT/EAD41) Luca.Arena@it.bosch.com; Comment comment@noreply.github.com Oggetto: Re: [rbei-etas/busmaster] busmaster don't support kvaser lin 2.0 (#1112)

Hello ,

I've encountered the same problem . Are there any update about this topic?

Thank you

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/rbei-etas/busmaster/issues/1112#issuecomment-391664211, or mute the threadhttps://github.com/notifications/unsubscribe-auth/Af77PUqtmw2pfkVEJs3TBVOyHxjr-78Iks5t1olLgaJpZM4P34km.

TianLiJun commented 5 years ago

Hello， I have the same issue. Anyone sloved it ? Thank you

JanSiroky778 commented 3 years ago

Hello. Same for me.

Forced 2.1 LIN version. image

BUSMASTER LDF editor correctly indicates that enhanced checksum will be used. image

When BUSMASTER runs, there is no way to generate enhanced checskum. Message window. image

It is not only error of checksum type displaying. When i use classic checksum on my LIN slave HW unit, that is communicating with BUSMASTER, the communication goes well.

my setup: Busmaster v 3.2.2 KVASER Leaf Profesional LIN (firmware updated, driver updated)