Closed ruslan-sa closed 8 months ago
Thanks a lot for pointing that out ! It has now been fixed. Please download OpenSeesPost.exe file from the repository and replace the existing one.
https://github.com/rclab-auth/gidopensees/tree/master/exe
I wonder if it is possible to display the Tri31 strain as well, but 'strains' is not accepted as a recorder argument.
Hello Team,
There appears to be an issue with the Tri31 element output. Please see details below. I was wondering if you might be able to check if this is a bug or whether this is an issue with my system? Thanks.
A 2D analysis of a split cylinder test was modelled in GiD-Opensees. The GiD postprocessing view shows the following error upon completion of the analysis:
The relevant output file line is shown here:
Figure 1 shows the geometry of the model. Figure 2 shows the mesh composed of triangular elements. Figure 3 shows the restraints used at the bottom of the circle. Figure 4 shows the load applied at the top of the circle. Figure 5 shows the Tri31 element material properties used. Figure 6 shows the Tri31 element thickness.
Figure 1 - Geometry
Figure 2 - Mesh
Figure 3 - Restraints
Figure 4 - Loads
Figure 5 - Elements - Material
Figure 6 - Elements - Thickness
The analysis files are here: SplitCylinder4.gid.zip