Closed benrussell11 closed 4 years ago
This is a duplicate of #143 . I haven't had much time to work on this project lately but I plan to start again this summer once my data acquisition system is done and will think about how to do this then.
Hi Andrew,
Ok … I’m planning on holding one of my intro classes at NYPower in July. I’ve updated the class to include the use of AT Experimental Motor Kits (EMKs) for those that already have the AT 54/1280 case. There are now two 54/1280 EMKs. One with the Medusa nozzle and one with a single port nozzle. So the need to support multi port nozzles has lessened to some extent.
Any chance you’ll be able to make NYPower now that URRF has been cancelled?
Ben
From: Andrew Reilley notifications@github.com Sent: Sunday, May 10, 2020 11:26 PM To: reilleya/openMotor openMotor@noreply.github.com Cc: benrussell11 ben.russell11@gmail.com; Author author@noreply.github.com Subject: Re: [reilleya/openMotor] Multi port nozzle (#149)
This is a duplicate of #143 https://github.com/reilleya/openMotor/issues/143 . I haven't had much time to work on this project lately but I plan to start again this summer once my data acquisition system is done and will think about how to do this then.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/reilleya/openMotor/issues/149#issuecomment-626450162 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AL4HO6HLLVF7TER37OIVLULRQ5V5JANCNFSM4M42ERMA . https://github.com/notifications/beacon/AL4HO6E2NGRAQFIP36WLIUTRQ5V5JA5CNFSM4M42ERMKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEVLN54Q.gif
Sounds good, I'll put it on the backburner then. Yup, hoping to make it to NYPower as I was very excited for URRF.
Cool ... See you at NYPower.
Ben
On Tue, May 12, 2020, 8:33 PM Andrew Reilley notifications@github.com wrote:
Sounds good, I'll put it on the backburner then. Yup, hoping to make it to NYPower as I was very excited for URRF.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/reilleya/openMotor/issues/149#issuecomment-627672534, or unsubscribe https://github.com/notifications/unsubscribe-auth/AL4HO6EVQODVLVZCCWVGSWDRRHTHFANCNFSM4M42ERMA .
Add support for multiport nozzles such as Aertech Medusa nozzle