reinhard-brandstaedter / solarflow-control

A tool to automatically control Zendure's Solarflow hub with more flexibility to match home power demand
67 stars 12 forks source link

Grid feed in from battery during night way to high #235

Closed AzraelsDisk closed 4 months ago

AzraelsDisk commented 4 months ago

2024-05-02 22:02:09,533:INFO: Hub has just recently adjusted limit, need to wait until it is set again! Current limit: -1, new limit: 300 2024-05-02 22:02:09,533:INFO: Solarflow is willing to contribute 150.0W (per channel) of the requested 163.7! 2024-05-02 22:02:09,533:INFO: Not setting inverter output limit as it is identical to current limit! 2024-05-02 22:02:09,534:INFO: Grid feed in from battery: 141.8W! 2024-05-02 22:02:09,534:INFO: Sun: 05:53 - 20:31 Demand: 163.7W, Panel DC: (0.0W), Hub DC: (305.5W), Inverter Limit: 600.0W, Hub Limit: -1.0W 2024-05-02 22:02:27,476:INFO: Triggering telemetry update: iot/73bktV/mg773f30/properties/read 2024-05-02 22:02:29,547:INFO: HUB: S:0.0W [ 0.0 ], B: 39% (38|39), V:48.5V (48.5|48.5), C:-302W, P:True (manual, possible), F:3.6h, E:132.4h, H:288W, L: -1W 2024-05-02 22:02:29,547:INFO: INV: AC:304.9W, AC_Prediction: 304.9W, DC:320.9W, DC_prediction: 320.9W (160.3|159.3|0.0|0.0), L:600W (150.0W/channel) [1500W] 2024-05-02 22:02:29,549:INFO: SMT: T:ShellyEM3 P:-119.6W [ -123.4,-123.4,-122.5,-120.3,-117.5,-119.2 ] Predict: -128.4W 2024-05-02 22:02:29,549:INFO: Direct connected panel are producing 0.0W, trying to get 164.4W from hub. 2024-05-02 22:02:29,549:INFO: Based on time, solarpower ( 0.0W) minimum charge power (45W) and bypass state (True), hub could contribute 300.0W - Decision path: 0.2. 2024-05-02 22:02:29,549:INFO: Setting solarflow output limit to 300.0W 2024-05-02 22:02:29,549:INFO: Solarflow is willing to contribute 150.0W (per channel) of the requested 164.4! 2024-05-02 22:02:29,549:INFO: Not setting inverter output limit as it is identical to current limit! 2024-05-02 22:02:29,549:INFO: Grid feed in from battery: 139.2W! 2024-05-02 22:02:29,549:INFO: Sun: 05:53 - 20:31 Demand: 164.4W, Panel DC: (0.0W), Hub DC: (303.6W), Inverter Limit: 600.0W, Hub Limit: 300.0W 2024-05-02 22:02:49,563:INFO: HUB: S:0.0W [ 0.0 ], B: 39% (38|39), V:48.5V (48.5|48.5), C:-302W, P:True (manual, possible), F:3.6h, E:132.4h, H:288W, L: -1W 2024-05-02 22:02:49,564:INFO: INV: AC:301.9W, AC_Prediction: 301.9W, DC:318.3W, DC_prediction: 318.3W (159.4|158.4|0.0|0.0), L:600W (150.0W/channel) [1500W] 2024-05-02 22:02:49,565:INFO: SMT: T:ShellyEM3 P:-126.8W [ -120.2,-120.2,-118.6,-119.7,-119.3,-121.0 ] Predict: -121.9W 2024-05-02 22:02:49,565:INFO: Direct connected panel are producing 0.0W, trying to get 161.0W from hub.

reinhard-brandstaedter commented 4 months ago

Your hub reports a limit of -1, which means it is in the initial startup state, where no data from the hub was received yet. It also reports that it is in bypass mode (P:True)? So essential data is still missing or unreliable. Is your hub still in online mode?

AzraelsDisk commented 4 months ago

ARG... just close it... ;-)