search

rene-dev / stmbl

AC Servo Driver for STM32F4
GNU General Public License v3.0
856 stars 406 forks source link

IRAM256-2067A2 Obsolete and out of stock #91

Open maxschommer opened 6 years ago

maxschommer commented 6 years ago

IRAM256-2067A2 is obsolete and out of stock everywhere I looked.

crinq commented 6 years ago

Yes, Infineon discontinued it after they bought IR. New design is in the pipeline.

rene-dev commented 6 years ago

IRAM256-1567A2 or IRAM256-1067A2 can be used as replacement, but they only have 15 and 10A, but thats plenty for most servos. they are still available at mouser.

stupotmcdoodlepip commented 6 years ago

Have you chosen a new part for the next revision yet? I'd like to get some boards made soon so would like to start gathering components. Many thanks for this project!

rene-dev commented 6 years ago

the next revision is far from complete, dont bother stocking parts. Make v4 if you cant wait.

rene-dev commented 6 years ago

All A2 models seem to be out of stock now. The A models can be bodged in: stmbl_v4

mztulip commented 6 years ago

Any progress with new revision?

crinq commented 6 years ago

yes, but not ready yet

meet-gopani commented 6 years ago

can we replace IRAM256-2067A2 with ON semiconductors- STK551U3A2A-E ? http://www.farnell.com/datasheets/2354470.pdf?_ga=2.109968454.293445377.1539426500-505894212.1539426500

crinq commented 6 years ago

No this does not work with 3 low side shunts (connected emitters of the lower igbts). The next STMBL version has a discrete 3 PH bridge with TO220, but the design is not ready yet.

meet-gopani commented 6 years ago

okay, thank you! STK554U392A-E: this is 15A version and this works with 3 low side shunts http://www.farnell.com/datasheets/2354469.pdf?_ga=2.30356220.293445377.1539426500-505894212.1539426500 will it work?

corrylaz commented 5 years ago

I know I feel like a total nag. I was going to build one of these, the bought a full CNC instead....but it turns out that machine can't get "Polygonal turning" (I want it for gear hobbing) so I'm going to add a spindle I can synchronize. I was planning on the full 2Kw. I may see if I can beg for one of the older chips. I'm not requiring this....now....as I've got some other design and building to do of the mechanical parts. Any hints as to when it will be out? Any beta's? as long as its not going to catch on fire, I'm game :)

acetylen-joe commented 5 years ago

I have a source, they got 20 units of the IRAM256-2067A2 in Stock left, but these costs 44,06€ per piece. If you think it is worth it i can order these IBGT Modules. I am from Germany (Berlin).

awigen commented 5 years ago

I'd like to order three!

corrylaz commented 5 years ago

I’m no github expert, otherwise it contact you off of this (if it’s possible). I’d order 4. If you can get my contact info, just contact me direct. I’m in the USA, so I know shipping won’t be the easiest!

silopolis commented 5 years ago

Hi,

Le mar. 19 févr. 2019 à 14:16, acetylen-joe notifications@github.com a écrit :

I have a source, they got 20 units of the IRAM256-2067A2 in Stock left, but these costs 44,06€ per piece. If you think it is worth it i can order these IBGT Modules. I am from Germany (Berlin).

Currently in planning/design/sourcing stage of a metal mill build that I want to be as Open Source as possible, I stumbled this week on this project and would love to be part of a group buy as I sadly discovered yesterday that supplies were an issue until next version (not before months). I'd need at least 3 drives to begin with for axes, may be a 4th one if I can drive my spindle motor with STMBL. Next, there should be one more for the ATC, and two others for the rotary axes, but a handfull of versions should have been released by that time ;) :D Would be even better if part of my money could benefit the project and help further development. And I'm in south of France FWIW.

rene-dev commented 5 years ago

sounds interesting, any more info about the machine?

acetylen-joe commented 5 years ago

@rene-dev can yo give a guess or an etimation when the next version / generation of the STMBL Board will be published - that means without the obsolete IRAM Chips from Infineon therefore with an other IBGT module?

I am undecided or it is worth to build the actual design with the last IRAM256 Chips if maybe in a couple of weeks there will be no more need for this IBGT Module and it is replaed with a new Version with estimated Production Lifetife for ne next 10+ years. And of course a lot cheaper than the last IRAM Chips in Stock now.

Sync- commented 5 years ago

It won't be ready in the next couple of weeks.

acetylen-joe commented 5 years ago

so we are talking about months or years?

silopolis commented 5 years ago

Hello Rene,

Le mer. 20 févr. 2019 à 11:30, Rene Hopf notifications@github.com a écrit :

sounds interesting, any more info about the machine?

Don't want to hijack this thread so, shortly, project is a 500x250x250 mm work enveloppe metal mill (Z height provision for trunion for future upgrade to 5 axes), ball bearing rails, ballscrews, servo driven axes, linear encoders feedback for positioning, 3HP and above servo driven spindle (ridgid taping etc), xx30/40 tool holding, automatic tool change, auto lubrication, flood and mist coolant (hopefully center of tool too), controled by LinuxCNC (or MachineKit ?). Should maximize use of standard compliant COTS parts and design should minimize (if not avoid) need for large machining, treatment operations. Structure will be reinforced cast epoxy concrete (alternatively high strength concrete) or epoxy concrete filled steel tubes/profiles. All documentation, design models, plans, BoMs, etc. will be Open Sourced (and published here on GH), LinuxCNC is of course FOSS, I now have found OSHW servo drives (yeah !), Mesa cards at least have their firmware Open Sourced so, that's not so bad :) You guys know of OSHW BLDCs ?! Everything else should be field replaceable by widely available (non propietary !) parts. Machine should be built minimal with 3 axes and produce (most of) its own upgrades (mainly ATC, 4th axis, 5th axis trunion,...). Well, here we are, that wasn't short :P

5tran9er commented 5 years ago

Hi guys. Who is interested in IRAMs can find some at tme.eu At the moment they declare 63 pcs in stock. Thee ones that I ordered came from Poland as I remember The price is 22€ each for 3+ pcs

beelash commented 5 years ago

This is a different version. iram256-2067a2 is needed

ср, 20 февр. 2019 г., 20:30 5tran9er notifications@github.com:

Hi guys. Who is interested in IRAMs can find some at tme.eu At the moment they declare 63 pcs in stock. Thee ones that I ordered came from Poland as I remember The price is 22€ each for 3+ pcs

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/rene-dev/stmbl/issues/91#issuecomment-465699186, or mute the thread https://github.com/notifications/unsubscribe-auth/As9cQTqyrb7yLSieo3WFIrLsZZl0jV2kks5vPZQrgaJpZM4T0F6v .

acetylen-joe commented 5 years ago

If the Vers. 4.1 of the stmbl works with the IRAM256-2067A Module, i will give it a try. But i have one Question left: whats the difference between the IRAM256-2067A and the IRAM256-2067A2 IGBTs?

rene-dev commented 5 years ago

the way the pins are bend. https://github.com/rene-dev/stmbl/issues/91#issuecomment-399050388

awigen commented 5 years ago

@rene-dev STK554U392A-E looks to be pin compatible, do you have any thoughts on this?

https://uk.farnell.com/on-semiconductor/stk554u392a-e/motor-driver-3-phase-ac-15a-sip/dp/2424504

silopolis commented 5 years ago

Aren't these the good ones ?: https://www.electronics-distributor.com/components/International-Rectifier(Infineon-Technologies)/IRAM256-2067A2.html https://www.avnet.com/shop/us/products/infineon/iram256-2067a2-3074457345624908256/ https://www.digipart.com/part/iram256-2067a2?gclid=Cj0KCQiAzePjBRCRARIsAGkrSm5PHYnI2n_eZbIYmGF9fHAkB9kmrR6MpJyiG4In5JWSB0iJVP3CEbwaAi1gEALw_wcB

Dynoteq commented 5 years ago

Infineon IKCM series seems to be a good replacement, for example IKCM30F60GA. It would require only minor modification to the existing design.

kamilkamil1 commented 5 years ago

Hi Rene, I am very impressed with you project. I know the question would I ask was asked many time but answer was not exactly for my question. Could you tell me if the new version of stmbl for TO220 will change only the HV power board or also control board ?

Thank you.

crinq commented 5 years ago

the logic board will change slightly to keep the isolation distance (the cutout for the HV mounting screw moves a bit)

jagdeepsingh02 commented 5 years ago

Hello @crinq any news on the new version? thanks :)

asorien commented 4 years ago

Hi ! I have a question before starting to build the v4.1 stmbl : all versions have the same pcb layout ?

asorien commented 4 years ago

from were I can download the pcb layout and who make it the cheapest ? Thank s!

crinq commented 4 years ago

V4.3 pcb data is there: /hw/kicad/v4.0 but you should try to source the iram first

kamilkamil1 commented 4 years ago

Hi Crinq,

Can I omit some components (not solder, eg SN65176B) if I need only encoder and step/dir inputs ? I want to check firstly the connection between PC and STMBL board.

Thank you.

rene-dev commented 4 years ago

yes, that is possible.

kamilkamil1 commented 4 years ago

Thank you Rene,

STEPPING3DCAD commented 4 years ago

Shouldn't this new infineon IM393X6FXKLA1 part work?? It looks like the replacement for it, although they don't say that... It's obviously not directly pin-compatible, but the data sheets are almost identical.

https://au.mouser.com/ProductDetail/Infineon-Technologies/IM393X6FXKLA1?qs=sGAEpiMZZMtKB4wrjsn3lUUtnZ7xtd6RKKFrk9F5T%2Fg%3D

crinq commented 4 years ago

DIP parts don't work in the current form factor.

ShadeTechnik commented 4 years ago

The IM393X6FXKLA1 is a SIP part but it doesn't have the forward bent legs like the A2 version of the original power IC. It would be a similar bodge to the "A" model as for angle, but the pinout is different. With re-routing of the power board it looks like it would work but the angle is not good for the form factor

Reworking the power board -for- the DIP package would actually probably be the easiest scenario as the power IC can still sit on the bottom of the PCB screwed against the heatsink. I may actually give this a try, the power PCB section is alot more simple to deal with, it's mostly just mechanical concerns with mounting. I didn't fully study the datasheet, but I think the IKCM20L60GDXKMA1 would work for this.

rene-dev commented 4 years ago

there is no space to re route it properly with this formfactor, feel free to try.

pacoespinola1 commented 4 years ago

is there somebody trying a solution? I am going to try may be the IM393X6FXKLA1.

krzysiek-007 commented 4 years ago

Hi. Anyone can sell me 1 pcs stmbl? Sorry for my English

metacomgd commented 3 years ago

Rochester electronics have ~4k in stock, MOQ of 17 at $15.28 a piece https://www.rocelec.com/part/INFIRAM256-2067A2

elektonik-computer commented 2 years ago

Hello, did I understand correctly the IRAM256-2067A2 can I replace with the IRAM256-2067A in the PCB version STMBL 4.3? Thanks Axel

crinq commented 2 years ago

yes, but you need a custom heatsink/case/mounting solution

fettah2 commented 1 year ago

Hi, it may be a bit late, but please ShadeTechnik have you succeeded with IKCM20L60GDXKMA1 or other part? any news for this wonderful project ??

artayasa commented 1 year ago

All A2 models seem to be out of stock now. The A models can be bodged in: stmbl_v4

Hi sir it posible to change the iram with this chip IKCM30F60GA??? And also i just want to used step dir comunication only ( i want to used mach3) so can i remove some parts??? To save more money??.