search

repaper / gratis

EPD Source codes and Documentation
240 stars 132 forks source link

Support for 4.41" Panel #13

Open GadgetUK opened 10 years ago

GadgetUK commented 10 years ago

Is support for the 4.41" panel http://www.pervasivedisplays.com/products/441 already available ? If not, what changes need to be implemented ?

hrishi921 commented 9 years ago

I am working with a 4.41" display as well. I am through with the hardware connections. I was looking for libraries that support the display of images on the 4.41" screen. Is any support available at this point of time ?

shawaj commented 8 years ago

Pretty sure that is is closed source for anything above the 2.71" at the moment...

Although I am not an official source

hrishi921 commented 8 years ago

I agree to that. Anything above the 2.7" right now is not friendly for quick applications unless you have some development time that you can spend understanding the data sheets in order to build a library.

On Sun, Jun 12, 2016 at 9:02 PM, Aaron Shaw notifications@github.com wrote:

Pretty sure that is is closed source for anything above the 2.71" at the moment...

Although I am not an official source

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/repaper/gratis/issues/13#issuecomment-225471112, or mute the thread https://github.com/notifications/unsubscribe/AMtJd8L9OFW7VVXit5StQjHlnSbl7PqNks5qLKwrgaJpZM4B6wCa .

aslakr commented 8 years ago

Does this also apply to the new (?) 4.2" http://www.pervasivedisplays.com/products/420 and http://www.pervasivedisplays.com/kits/ext2_kit ?

shawaj commented 8 years ago

The 4.2" works with the ext 2 kit but it has an internal timing circuit (iTC) and so currently is more limited than the screens with external timing circuit (eTC).

However the up side is that it's quicker and cheaper to build products with the iTC and requires less on the software side too in principle.

It's a great size too! On 30 Jun 2016 2:13 p.m., "Aslak Raanes" notifications@github.com wrote:

Does this also apply to the new (?) 4.2" http://www.pervasivedisplays.com/products/420 and http://www.pervasivedisplays.com/kits/ext2_kit ?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/repaper/gratis/issues/13#issuecomment-229653902, or mute the thread https://github.com/notifications/unsubscribe/ADNCurgXLJLdNt8-6Vzk2IpnTi1aLhTBks5qQ8ENgaJpZM4B6wCa .

repaper commented 8 years ago

4.2" and EXT2 kit are now supported in Pervasive only. The new driver IC (iTC) is totally different from the G2 of supported for sub 3" that open in this Git. Most of the time, you can update display follows the application note that can be downloaded at the panel webpage in Pervasive. We are working on the new plan to support the new driver series of panels. You can ask for assistance to Pervasive if you need the sample code for the new panels before we renew the Repaper.org and Gratis Git. Thanks.

GadgetUK commented 8 years ago

Could you provide an email address where we can get support for the new 4.2" iTC and ext2 kit please ?

repaper commented 8 years ago

You can submit your request to the Technical Support webform.