search

reprappro / RepRapFirmware

OO C++ RepRap Firmware
Other
143 stars 120 forks source link

Z motors start to make click noise after FW Upgrade #49

Open gdwinslow opened 10 years ago

gdwinslow commented 10 years ago

Hi, I tried upgrading my FW to the RepRapFirmware-065b, 065c and 065D. But the Z motor is making a clicking noise every so meany revolutions. I can go back to the 057a and the Z motor work fine. Any way’s, I don’t have a Debug port or I would give it a go

RRP-support commented 10 years ago

Thanks for the report, we're looking into it. Are you using the 65d config.g file? We have increased the speed and acceleration settings in this, and made some other changes - T1 is the first extruder now, not T0, and this needs to be set earlier in config.g. Running 65d after sending it M906 X800 Y800 Z800 E800 M201 X1000 Y1000 Z15 E1000 M203 X15000 Y15000 Z300 E3600 I can do G1 Z20 F20 right up to G1 Z20 F10000 (the latter obviously stops at the speed limit) with no clicks. Can you post your config.g? You may have mis-typed something.

Ian, RepRapPro tech support

gdwinslow commented 10 years ago

Thanks for your response, I did update my config.g (Should of attached as well Sorry). but I only got The change in the T0 to T1 Change. Will try that and send config.g when I get home tonight

Guy Winslow Home: 925-606-5944 Cell: 925-413-2886

From: RRP-support Sent: ‎Friday‎, ‎May‎ ‎9‎, ‎2014 ‎2‎:‎05‎ ‎AM To: reprappro/RepRapFirmware Cc: Guy Winslow

Thanks for the report, we're looking into it. Are you using the 65d config.g file? We have increased the speed and acceleration settings in this, and made some other changes - T1 is the first extruder now, not T0, and this needs to be set earlier in config.g. Running 65d after sending it M906 X800 Y800 Z800 E800 M201 X1000 Y1000 Z15 E1000 M203 X15000 Y15000 Z300 E3600 I can do G1 Z20 F20 right up to G1 Z20 F10000 (the latter obviously stops at the speed limit) with no clicks. Can you post your config.g? You may have mis-typed something.

Ian, RepRapPro tech support

— Reply to this email directly or view it on GitHub.

gdwinslow commented 10 years ago

Hear is the files you requested. I changed my Startup script and the config script to use T1 instead of T0. Ran a Small print last night, but I haven't had the time to look at it. Cant run the big print till this weekend to see if the problem is still there

Guy Winslow Home: 925-606-5944 Cell: 925-413-2886

From: RRP-support Sent: ‎Friday‎, ‎May‎ ‎9‎, ‎2014 ‎2‎:‎05‎ ‎AM To: reprappro/RepRapFirmware Cc: Guy Winslow

Thanks for the report, we're looking into it. Are you using the 65d config.g file? We have increased the speed and acceleration settings in this, and made some other changes - T1 is the first extruder now, not T0, and this needs to be set earlier in config.g. Running 65d after sending it M906 X800 Y800 Z800 E800 M201 X1000 Y1000 Z15 E1000 M203 X15000 Y15000 Z300 E3600 I can do G1 Z20 F20 right up to G1 Z20 F10000 (the latter obviously stops at the speed limit) with no clicks. Can you post your config.g? You may have mis-typed something.

Ian, RepRapPro tech support

— Reply to this email directly or view it on GitHub.

gdwinslow commented 10 years ago

Ran the config i Sent you, Problem still exists. The thresh-hold a pers to be blow 8mm radios