I'm sorry but I did not know just how bad the audio output sounds with 16khz though the 3.5mm. If I had known before I bought it, I'd return it.
It just sound completely awful listening to music with the respeaker. Is there someway to fix this issue?
I've flashed the firmware file 48k_1_channel_firmware_6.02dB.bin and 48k_6_channels_firmware_6.02dB.bin but there was no difference on the audio output quality. I've re-flashed multiple times.
My cat /proc/asound/ArrayUAC10/stream0 (it says 48 khz but plays 16khz sound):
SEEED ReSpeaker 4 Mic Array (UAC1.0) at usb-0000:01:00.0-1.1, full speed : USB Audio
I'm sorry but I did not know just how bad the audio output sounds with 16khz though the 3.5mm. If I had known before I bought it, I'd return it. It just sound completely awful listening to music with the respeaker. Is there someway to fix this issue?
I've flashed the firmware file 48k_1_channel_firmware_6.02dB.bin and 48k_6_channels_firmware_6.02dB.bin but there was no difference on the audio output quality. I've re-flashed multiple times.
My cat /proc/asound/ArrayUAC10/stream0 (it says 48 khz but plays 16khz sound): SEEED ReSpeaker 4 Mic Array (UAC1.0) at usb-0000:01:00.0-1.1, full speed : USB Audio
Playback: Status: Stop Interface 1 Altset 1 Format: S24_3LE Channels: 2 Endpoint: 1 OUT (ASYNC) Rates: 48000, 48000, 48000 Bits: 24 Channel map: FL FR
Capture: Status: Stop Interface 2 Altset 1 Format: S16_LE Channels: 6 Endpoint: 2 IN (ASYNC) Rates: 48000, 48000, 48000 Bits: 16 Channel map: FL FR FC LFE SL SR